Yahoo Groups archive

Fairlight-CMI

Index last updated: 2026-04-29 00:03 UTC

Messages

Browse messages

Page 85 of 109 · 5429 messages matched

Synclavier 9600 PSTT on eBay

2004-09-10 by Peter Connelly (Core Design Ltd.)

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=1289&item=3747533083&rd=1 I wan't it! :-D Anyone know how much this 9600 with it's spec is worth? Cheers, Peter

Thread view Attachments: 0

Re: Synclavier 9600 PSTT on eBay

2004-09-10 by d_40q

I have seen this system on ebay twice before . It is definetely not a Synclavier 9600. This is a classic Synclavier PSMT system. The MIDInet interface must have been added at a later time. MIght nevertheless be a beautiful system if it has been well cept and maintained. This is t

Thread view Attachments: 0

RE: [Fairlight-CMI] Re: Series III MIDI

2004-09-07 by Peter Connelly (Core Design Ltd.)

Hi Chris, I've tried all this and a few other MIDI checks so the only thing it can be is that the MIDI card on the Fairlight is faulty. All MIDI cables work and all IN/OUT's on both of my Midex-8's and the Delta 1010 work fine. Basically there is no MIDI information leaving the F

Thread view Attachments: 0

Tandberg 150 mb tapestreamer

2004-09-07 by brian_ronn

Hi I've just found an external SCSI 150 mb tapestreamer from Tandberg. Will the standard CMI III (operating system 6.03) be able to recognize and use it or shouldn't I try to connect it for the health of the CMI III? Best regards Brian

Thread view Attachments: 0

Cameo: Series III in Anastacia - Sick and Tired MTV clip.

2004-09-07 by feldmann@xs4all.nl

For the fanzines: A series III music keyboard can be seen in Anastacia's video clip for her current single Sick and Tired. One of the few recent appearances of a Fairlight in an MTV aired videoclip. It appears to me to be a series III because of the white colour of the MKB, a lot

Thread view Attachments: 0

TEST

2004-09-03 by Peter Connelly (Core Design Ltd.)

Just testing everything is ok as my mails were bouncing whilst I was away on holiday and the list seems dead, so maybe there is a connection... Regards, Peter

Thread view Attachments: 0

Noise/Crackles from Series III

2004-09-01 by Peter Connelly (Core Design Ltd.)

Hi guys, I have a slight problem with my Series III, which has been happening for some time now and Peter Wielk has 'possibly' boiled it down to a faulty power supply. Before I call an engineer out to help me out with this problem, has anyone else experienced this (See Below *) a

Thread view Attachments: 0

RE: [Fairlight-CMI] Re: Series III MIDI

2004-08-31 by Peter Connelly (Core Design Ltd.)

Thanks Chris, I'll give this a go and let you know how I get on... With regards to the Midex light panels coming on, I've just realised the Fairlight is plugged into my soundcard MIDI ports (Delta 1010), but their lights don't indicate any Input, only Output so can only assume it

Thread view Attachments: 0

Re: [Fairlight-CMI] Re: Penelope Cruz and series III added

2004-08-31 by feldmann@xs4all.nl

> hmmm, Google-searching for nubile young actresses > lasciviously-posed on top of Fairlight equipment, are we ? ;-) I was about to photograph my keyboard as she popped in and asked to be included ;-) > this is supposed to be a family-oriented Fairlight message board ! :-) She is

Thread view Attachments: 0

Re: Penelope Cruz and series III added

2004-08-30 by David J. Wilson

hmmm, Google-searching for nubile young actresses lasciviously-posed on top of Fairlight equipment, are we ? ;-) this is supposed to be a family-oriented Fairlight message board ! :-) ha ha David --- In Fairlight-CMI@yahoogroups.com, "Harald Feldmann" wrote: > In the general sect

Thread view Attachments: 0

Re: CMI Extender Boards + CMI III service manual in PDF...

2004-08-30 by David J. Wilson

Hi Chris, yes I'm still waiting for 32MB RAM cards too, I told Peter I would order two also a while back. for the time being, I swapped out all 7 of my 2MB RAM cards with two 8MB RAM cards. This helps a lot and cuts down on heat. I can add back in some more 2MB cards but then I'm

Thread view Attachments: 0

Penelope Cruz and series III added

2004-08-30 by Harald Feldmann

In the general section, you will now find a photo of Penelope Cruz elegantly draped on a Series III music keyboard. I just *happened* to stumble across that one. (really) Regards, Harald.

Thread view Attachments: 0

32 Mbyte RAM boards

2004-08-27 by horiprod

Hi James. I emailed you over a month ago regarding a new run of 32 Mbyte cards, but you obviously didn't receive it. I've been in contact with the card's designer, and we have been looking at another production run of 20. I mentioned that to go ahead, we would need a "critical ma

Thread view Attachments: 0

"Dream" machine... literally???

2004-08-26 by Marcin 'Rambo' Roguski

That has to mean something, Today I actually dreamed that somebody "anonymous" sent me a CMI IIx, and since I remember the dream even just now- hmmm, that's definitely worth paying attention :) Sorry, I don't recall software revision (it did fire up and show index page tho) :), b

Thread view Attachments: 0

Re: CMI Extender Boards + CMI III service manual in PDF...

2004-08-26 by chaworth012000

Hi James, This is a shame as I am one of those people who would purchase one straight away, not only for the increase in memory but to reduce the overall number of cards running and the subsequent heat generation. It is especially frustrating given that the production should be q

Thread view Attachments: 0

Re: CMI Extender Boards + CMI III service manual in PDF...

2004-08-26 by chaworth012000

Laurent / Jean-Bernard, Developments like this that actively progress the life of these machines is great news, which brings us back to one of the groups favourite topics, the 32MB replacement memory boards. Does anyone know whether more of these boards are going to be made and i

Thread view Attachments: 0

CMI Extender Boards + CMI III service manual in PDF...

2004-08-25 by Jean-Bernard EMOND

Hi, For your information, I do have the CMI III service manual and will have it available for download soon in PDF. I still have to scan a part of it. Please stay tunned... About CMI Extender Boards, regarding the price, I don't know yet. It will vary depending the number of boar

Thread view Attachments: 0

Fairlight Website back online

2004-08-23 by feldmann@xs4all.nl

Hi ell, I just noticed the Fairlight AU website is back online and the company seems to be alive and well ? All the old downloads are gone though :-( www.fairlightau.com Regards, Harald.

Thread view Attachments: 0

Re: [Fairlight-CMI] Make some CMI boards extender...

2004-08-21 by kevin kelley

I would be very, very interested in purchasing an extender card. Please contact me with details at xirin6@yahoo.com Kevin kelley Audio Playground www.keyboardmuseum.org --- Jean-Bernard EMOND wrote: > > Hi, > > We're planning to order all the components to make > some CMI boards

Thread view Attachments: 0

Make some CMI boards extender...

2004-08-20 by Jean-Bernard EMOND

Hi, We're planning to order all the components to make some CMI boards (digital side) extender which are usefull for the maintenance of the Fairlight. The extender board has the same physical size as the CMI boards (applicable to all versions) and allow to run the Fairlight with

Thread view Attachments: 0

Re: Series III MIDI

2004-08-20 by chaworth012000

Following up on yesterday's thread regarding setting up a Series III to act as a master keyboard with Cubase, the following set-up is the one that I use to get round the midi-loop problem that the series III keyboard has when used with an external sequencer with soft-thru set on.

Thread view Attachments: 0

RE: [Fairlight-CMI] Series III MIDI

2004-08-19 by Chris Haworth

Peter - which input port of the midex are you connecting it too? Mine can be a little fussy if not 1 or 8. Back to first principles, when you press a key or move a control on the Fairlight keyboard, does the corresponding LED on the midex's front panel light up? This will determi

Thread view Attachments: 0

RE: [Fairlight-CMI] Series III MIDI

2004-08-19 by Peter Connelly (Core Design Ltd.)

Hi Chris, Thanks... I am getting no MIDI information at all. The INPUT meter doesn't light up. Cheers, Peter -----Original Message----- From: Chris Haworth [mailto:christopher.haworth@uk.ibm.com] Sent: 19 August 2004 13:22 To: Fairlight-CMI@yahoogroups.com Subject: Re: [Fairlight

Thread view Attachments: 0

Re: [Fairlight-CMI] Series III MIDI

2004-08-19 by Chris Haworth

Peter, Setting up the Series III to act as a master keyboard can be tricky and the manuals are essentially no help with this whatsoever. I too use Cubase / midex 8 in my set-up and what I ended up doing was setting up a 'dummy' system within the Fairlight which effectively 'local

Thread view Attachments: 0

Series III MIDI

2004-08-19 by Peter Connelly (Core Design Ltd.)

Ok, I'm having problems using my Series III keyboard as a master/controller keyboard. I have all the relevant connections to and from my MIDEX 8's. I can control the Fairlight from Cubase, ie it receives MIDI information, but it won't send any information from the Fairlight to Cu

Thread view Attachments: 0

RE: [Fairlight-CMI] MFX3 Mini's on eBay

2004-08-17 by feldmann@xs4all.nl

> Hi Harald, Hi Peter, > They were bought by a guy with the handle of EnsnareYou. If memory serves > me correctly, I'm sure he has a LOT of Fairlight gear already including > Seris IIx, III, MFX2, MF3, etc... That's right, he collects and occasionally sells Fairlight equipment. >

Thread view Attachments: 0

RE: [Fairlight-CMI] MFX3 Mini's on eBay

2004-08-17 by Peter Connelly (Core Design Ltd.)

Hi Harald, They were bought by a guy with the handle of EnsnareYou. If memory serves me correctly, I'm sure he has a LOT of Fairlight gear already including Seris IIx, III, MFX2, MF3, etc... Peter -----Original Message----- From: feldmann@xs4all.nl [mailto:feldmann@xs4all.nl] Sen

Thread view Attachments: 0

Re: [Fairlight-CMI] MFX3 Mini's on eBay

2004-08-17 by feldmann@xs4all.nl

Hi Peter, That's too bad, but more studios are selling their equipment so I'd expect more to come. > I placed a few bids on these items, but for once I stuck to my budget and > stopped at around $400 USD. They actually sold for $610 and $560 and were > won by a name I seem to rec

Thread view Attachments: 0

MFX3 Mini's on eBay

2004-08-17 by Peter Connelly (Core Design Ltd.)

I placed a few bids on these items, but for once I stuck to my budget and stopped at around $400 USD. They actually sold for $610 and $560 and were won by a name I seem to recall from this list. It's a shame I missed these, but hopefully more will appear... P

Thread view Attachments: 0

RE: [Fairlight-CMI] Re: Hi harald >

2004-08-13 by feldmann@xs4all.nl

> Hi Harald, > Do you know what year these Mini's were released... In the mid/late 90s, not what year exactly. The MFX3+'s for sale recently usually were built 1996+ > Do you think this is > something worth having? I'd quickly check out the condition of the Series III MFX2 and th

Thread view Attachments: 0

RE: [Fairlight-CMI] Re: Hi harald >

2004-08-13 by Peter Connelly (Core Design Ltd.)

Hi Harald, Do you know what year these Mini's were released... Do you think this is something worth having? P -----Original Message----- From: feldmann@xs4all.nl [mailto:feldmann@xs4all.nl] Sent: 13 August 2004 09:43 To: Fairlight-CMI@yahoogroups.com Subject: RE: [Fairlight-CMI]

Thread view Attachments: 0

RE: [Fairlight-CMI] Re: Hi harald >

2004-08-13 by feldmann@xs4all.nl

Hi Peter, > Sounds like you got a well looked after IIx. I'm jealous. Don't be, being jealous doesnt help anyone. Better to focus on how to collaborate and make a joint effort in creating something beautiful. > I really want > one of these, but space (and money) is a problem at t

Thread view Attachments: 0

Re: [Fairlight-CMI] Re: Hi harald >

2004-08-13 by feldmann@xs4all.nl

> --- In Fairlight-CMI@yahoogroups.com, feldmann@x wrote: >> To David: >> the other monitor. The flight cases are great. > yes, I remember drooling Drooling ? ;-) my,my. I was cautious, I will say. > when I saw the Ebay photos of that IIx. > it looked in very good physical condit

Thread view Attachments: 0

Re: Hi harald >

2004-08-12 by David J. Wilson

--- In Fairlight-CMI@yahoogroups.com, feldmann@x wrote: > To David: > > > From: David J. Wilson [mailto:jeepcherokee_10@y...] > > > > oh, you bought that one. looked like it came with a lot of > > parts & 2 monitors as I recall. > > It came with more than 100 disks, and indeed so

Thread view Attachments: 0

RE: [Fairlight-CMI] Re: Hi harald >

2004-08-12 by Peter Connelly (Core Design Ltd.)

Sounds like you got a well looked after IIx. I'm jealous. I really want one of these, but space (and money) is a problem at the moment... I'm not sure how much that MFX3+ went for. I didn't keep an eye on it. I'm willing to have the MINI as long as I don't pay more than a few hun

Thread view Attachments: 0

RE: [Fairlight-CMI] Re: Hi harald >

2004-08-12 by feldmann@xs4all.nl

To Peter: > Ah, that one :-) > > Does it work ok? I recall the listing saying it hadn't been tested but the > monitors (although slightly damaged) switch on, etc/// The system tried to boot, but it had empty disks loaded. By the time I had inserted the boot disks, a fuse had blow

Thread view Attachments: 0

RE: [Fairlight-CMI] Re: Hi harald >

2004-08-12 by Peter Connelly (Core Design Ltd.)

Ah, that one :-) Does it work ok? I recall the listing saying it hadn't been tested but the monitors (although slightly damaged) switch on, etc/// P -----Original Message----- From: David J. Wilson [mailto:jeepcherokee_10@yahoo.com] Sent: 11 August 2004 18:03 To: Fairlight-CMI@ya

Thread view Attachments: 0

MFX3 + Mini

2004-08-12 by Peter Connelly (Core Design Ltd.)

Does anyone know much about these? I take it they're a cut down version of the MFX3+ There is one on eBay I'm considering bidding on. http://cgi.ebay.co.uk/ws/ebayISAPI.dll?ViewItem&item=3741448394 Cheers, Peter

Thread view Attachments: 0

Re: Hi harald >

2004-08-11 by David J. Wilson

oh, you bought that one. looked like it came with a lot of parts & 2 monitors as I recall. I'm curious as to how it works out for you, also wonder what happened to Talk Talk's old IIx, that a guy on this list was restoring. he sent me e-mail a while back, but never heard how the

Thread view Attachments: 0

O/T - JD Synths

2004-08-11 by Peter Connelly (Core Design Ltd.)

Ah, thanks for this info... You might just ahev saved me some cash I also have most of the MKS range (80/70/50/30/10), so maybe I have that 'JD' sound between these and the JX/XV/XR's :-D I might have a tinkle on one though, next opportunity. Just in case ;-) Cheers, Peter -----O

Thread view Attachments: 0

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.