inexpensive inkjets that can use quadtonerip
2008-01-28 by johnlimpert
Can anyone recommend a printer that can use quadtonerip that is inexpensive? a few printers i have seen are: 1) epson 380 - guess it can use a profile to make
Messages
Browse messages
Page 200 of 318 · 15852 messages matched
QTR and curves - Newbee questions - Sorry...
2008-01-28 by grayscale2008
Hi all! I am new to the QTR. Therefore I have several (or a lot of) questions. I have read the manual und I have searched already this groups and the Internet,
Re: Epson 1280 and Leopard
2008-01-27 by eyewall
... Interesting. I ve had the same problems with my 2200, under Leopard. I plan on rolling back to Tiger. If I find a solution for my 2200, I ll pass it along.
RE: [QuadtoneRIP] Feature request
2008-01-27 by Stephen Billard
Sounds like a good idea. Why don t you copy the shortcut and drop it into your send to folder. Then it will be in the Send to menu. Look in your documents
Re: [QuadtoneRIP] QuadtoneRIP to print longer than 44" on the Epson 4000
2008-01-27 by Eric Niceguy
I just printed a 46 image using QTR using my epson 4000 printer. No problem. ... [Non-text portions of this message have been removed]
Epson 1280 and Leopard
2008-01-27 by jgburton1
I have gotten my 1280 peizo k6 to print just fine but I am unable to clean the heads. Half way thru the cleaning it kicks out of the printer utility.
QuadtoneRIP to print longer than 44" on the Epson 4000
2008-01-27 by wmjamedia
Please clarify if QuadtoneRIP can help me print longer than 44 on my Epson 4000? Do other RIPs do that. I m tired of struggling with tiling with
Feature request
2008-01-27 by Richard Smallfield
Hi Roy, I was just thinking - it might be handy to have QTR added to the Windows Send To menu. Any thoughts? thanks, Richard -- Backroads Essay:
R1800, Epson Ink, and Kirkland (Costco) Glossy Paper
2008-01-27 by Alan Tochterman
I am brand new to black and white printing, as well as new to the Quadtone RIP software. I am not yet sophistacated enough to develope my own curves but did
Help - Frustrated - Invalid Linearize Curve - Not Constantly Increasing error
2008-01-26 by Bill Wetzel
Greetings, I ve been working on this for the better part of last night and today and am not getting anyplace. I hope someone here has an insight. I have
Re: Lab values not in order. Cannot ...
2008-01-26 by odda
Forgive me if this has been convered; I did not peruse the entire thread. The QTR-Linearize-Data/QTR-Create-ICC will only work (in my experience) on LAB data,
Re: Lab values not in order. Cannot ...
2008-01-26 by michaelrosensf
Thank you Lou and Jean for telling me that the 21 step random file can work and presenting your caveats. I will tinker and will get it done. Looking at what I
Re: Lab values not in order. Cannot ...
2008-01-26 by michaelrosensf
... Looking at what I called the Sample files, I see that they are not in the same format as the files from my reading of the 21 step not-random step wedge.
Obvious Lines in print R1800
2008-01-26 by kokousek
Hi everyone, i bought Qtr couple days ago And i am already getting better BW prints on my R1800 than ever before, only think is when I am printig throught QTR
Printer and Printing Model
2008-01-26 by hansraj_vyas
I am a Newbie. I have Epson Stylus Photo R230. Which will be matching Printing Model-Quad R 220-GQ or Quad R 220-K6 ?
RE: [QuadtoneRIP] QTR Media Types
2008-01-26 by Stephen Billard
You can save presets with descriptive names. These save all the relevant printing parameters. - Stephen stephen.sbillard.org ... From:
QTR qui
2008-01-25 by jjd124
anyone having a problem running QTR qui 2.5.2.1, after the download and cleanup i run it and it errors with can not find printer definitions I drop back to
RE: [QuadtoneRIP] QTR Media Types
2008-01-25 by Brian Corll
Stephen Agreed, but sometimes I would like to see something more descriptive than just Matte paper under media type, especially if I don t have a curve for a
RE: [QuadtoneRIP] QTR Media Types
2008-01-25 by Stephen Billard
Yes, but that is the epson driver, not QTR. We can t help it if they don t get it right. Profiles can be linked to paper types--after all, it is the paper and
RE: [QuadtoneRIP] QTR Media Types
2008-01-25 by Brian Corll
Well, Epson s driver at least on the 2200 reads the ICC profiles on hand to display the paper types. Only for Epson papers though ! ... Brian Corll Brian
RE: [QuadtoneRIP] Second request for help
2008-01-25 by Tom Moore
... Yes there is. The profiles used by QTR to describe a particular printer/ink/paper combination are called curves and are different from ICC profiles -
RE: [QuadtoneRIP] QTR Media Types
2008-01-25 by Stephen Billard
QTR does not use ICC profiles. And if it did it would not be a media type. ICC profiles are similar to the QTR curves. - Stephen stephen.sbillard.org ... From:
Re: [QuadtoneRIP] Second request for help
2008-01-25 by Eric Niceguy
Thanks, Tom. That helps. Is there a difference between a standard ICC profile and one specifically for use by QTR? (I m guessing that there is). ...
Re: [QuadtoneRIP] Second request for help
2008-01-25 by Eric Niceguy
Thank you, Brian. That is very helpful info. ... [Non-text portions of this message have been removed]
RE: [QuadtoneRIP] Second request for help
2008-01-25 by Brian Corll
The difference between photo black and matte black is that matte black is laid down on matte paper as larger droplets because of the much greater absorbency of
RE: [QuadtoneRIP] Second request for help
2008-01-25 by Tom Moore
... Since you re asking about UC black inks, I presume that curves you are looking for are for UC ink as well. The largest repository of curves comes with
Re: [QuadtoneRIP] QTR Media Types
2008-01-25 by Tom Baker
They don t show up in the Media box. They show up in the Curve Setup box where you select the profile(s). TB vassarman74 wrote:
Re: Question about linearizing a QuadToneRIP Curve
2008-01-25 by Dalton
... Eye-One-ReadMe.pdf ... Drop-Quad-Profile to make a curve ... from a file for similar paper ... GRAY_HIGHLIGHT=6 ... work DO NOT use ... 61.4925 57.3125 ...
Re: A small request for Roy
2008-01-25 by dgattarino
Hello Brian, this answer is also for Richard Smallfield who asked the same question. As I mentioned, I am working with a Fine Art photographer who spent more
Second request for help
2008-01-25 by erichocinc
I d hoped to hear by now from some of the experienced folks on here. For various reasons I m not able to develop my own curves at this point, so was wondering
Re: [QuadtoneRIP] Re: QTR Media Types
2008-01-25 by Howard Shaw
... That s what I do and I think most others if you look back in the archives of this list. Howard
Re: A small request for Roy
2008-01-25 by vassarman74
Daniela, I can t help you with your question as I am not Roy, but I am curious as to what sort of papers you are using. I started my artistic life as a
QTR Media Types
2008-01-25 by vassarman74
No response the first time - I ll try this again. I have a number of ICC profiles installed. How do I get them to show up in the Media Type combo box ?
Re: QTR Media Types
2008-01-25 by vassarman74
... up ... Hmmm....No response to this one. Let s just say that I m new to Quadtone RIP but not exactly new to digital printing or certainly not to photography
Re: Lab values not in order. Cannot ...
2008-01-25 by Dalton
... QTR-51-random) to work. I get the ... Create ICC ). ... Hello Michael, I get the same error message with the supplied sample files. I ve also been unable
Re: 1440 super?
2008-01-25 by Tyler Boley
Hi Roy, the word I have is that Epson would not give them code to support the x880s unless they dropped K7 support. So, they are doing what they can to keep
Re: [QuadtoneRIP] 1440 super?
2008-01-25 by Roy Harrington
Hi Tyler, The 1440super is 1440x720 with an 8-pass weave method rather than the standard 4-pass. So no it s not 1440x1440. The Epson docs are kind of
Re: Lab values not in order. Cannot ...
2008-01-24 by John Vitollo
... How about this.... the code was not changed to build better profiles? 8-} Not that it s needed...
1440 super?
2008-01-24 by Tyler Boley
I see for the 7800 there is a setting called 1440 super as well as 1440 dpi. Is this 1440x1440? I have that available in StudioPrint and have been wondering if
Re: Lab values not in order. Cannot ...
2008-01-24 by dewittehd
Michael, Lou, I just installed the update to Spyder3print and only spent one evening trying to get the right tone for my R1800. I have seen that the
A small request for Roy
2008-01-24 by dgattarino
Hello Roy, I work as an assistant in a small studio of a Fine Art photographer based in Southern Italy. After tens of years spent in a darkroom, he decided to
Re: Lab values not in order. Cannot ...
2008-01-24 by Louis Dina
Michael, I always use the 21 step random target for linearizing in QTR and it works just fine. The only time I have had problems was when shadow values were
Re: Lab values not in order. Cannot ...
2008-01-24 by michaelrosensf
I m the originator of this thread, which has generated discussion about Spyder3Print. However, my question has never been addressed. I ll rephrase. Has anyone
Re: Lab values not in order. Cannot ...
2008-01-23 by dewittehd
Sorry to disagree, code has changed: /*********** quote from email: All existing PrintFIX PRO users can download and install the latest (newly renamed) version
Re: Lab values not in order. Cannot ...
2008-01-23 by John Vitollo
... and Spyder3Print? ... cases. Just the interface has been updated to Spyder3Print, no internal changes to the code.
Re: Lab values not in order. Cannot ...
2008-01-23 by dewittehd
Jim, Spyder3Print is the new name for PrintFixPro and there is a latest version on the download page of Datacolor. Your old serial number remains valid but
Re: QTR and Epson SP 1200
2008-01-23 by frankbickelmeyer
... Epson ... Europeanink. ... the ... know ... SP ... Since i have had some free time these days i came to a fitting workaround by myself: when listing the
Is this possible? .... curve points/point list
2008-01-23 by evanj1969
Is this possible? when working in the curve creation mode, if you select load curve as opposed to gray ink or toner you get a curve tab where you would
RE: [QuadtoneRIP] Re: Lab values not in order. Cannot ...
2008-01-22 by Tom Moore
... It seems to be a software upgrade and definitely does use the same spectro. There must be some internal improvements because Colorvision/Datacolor keep
Re: [QuadtoneRIP] Re: Lab values not in order. Cannot ...
2008-01-22 by Jim Thyer
Can anyone tell me the difference between PrintFixPro 2.1 (the upgrade I loaded recently) and Spyder3Print? Is it a newer better version? The