Re: Curve location on a Windows 10 PC
2016-08-24 by paulmwhiting@...
I should add that the thread I posted deal with some other issues as well. You have to read the whole thread to get an idea where the curves are located. Paul
Messages
Browse messages
Page 41 of 318 · 15852 messages matched
Re: Curve location on a Windows 10 PC
2016-08-24 by paulmwhiting@...
An earlier thread might be helpful - at least it helped me. Has to with the curves being in something called the Virtual Store. The GUI for QTRip hasn t been
Re: [QuadtoneRIP] Issues with El Capitan?
2016-08-24 by forums@walkerblackwell.com
Cheers! ... W
Re: [QuadtoneRIP] Curve location on a Windows 10 PC
2016-08-24 by Jim Thyer
My Windows 10 files are, for the Epson P600 printer, in Program Files (x86) QuadToneRIP Profiles P600-UC *.qidf for the Qidf files Program Files
Curve location on a Windows 10 PC
2016-08-24 by brucerccampbell@...
Where are the curves supposed to be located on a Windows 10 PC.? Some of my curves show up in the Quad Tone BIN location while others don t. I have searched my
Re: [QuadtoneRIP] Error Message when using Drop-Quad-Profile
2016-08-23 by Roy Harrington
Looks to me like you don t have a Quad7890 printer that your curve specifies. Drop-Quad-Profile does not automatically create a printer like
Error Message when using Drop-Quad-Profile
2016-08-23 by jthacker@...
When using the Drop-Quad-Profile on a MAC (El Capitan), I get the following message: Could not find PPD file for Quad7890 at /etc/cups/ppd/Quad7890.ppd I
Re: [QuadtoneRIP] Issues with El Capitan?
2016-08-23 by parkersmithphoto@...
Walker, Thanks for the help. This fixed it. Parker
Re: [QuadtoneRIP] Problems with Windows Version of Quad Tone Rip
2016-08-23 by Bruce Campbell
Kerik No my new curve does not show up in the pull down. After I have tried to save the new curve I wait several minutes while I just see the spinning
Re: [QuadtoneRIP] Problems with Windows Version of Quad Tone Rip
2016-08-23 by Kerik Kouklis
I think you may find that it s working. Even though the curve never shows up when you click Show Curve and then it just spins, typically the curve gets
RE: [QuadtoneRIP] Problems with Windows Version of Quad Tone Rip
2016-08-23 by Mike Kirwan
If I remember correctly my problem happened after one of the many updates. Could not save preferences in a couple of programs – they just would not stick.
Re: [QuadtoneRIP] Problems with Windows Version of Quad Tone Rip
2016-08-23 by Bruce Campbell
Mike I don t know about this . It worked ok a month ago after I got Windows 10 so I don t know what is causing the issue. Bruce On Monday, August 22, 2016
RE: [QuadtoneRIP] Problems with Windows Version of Quad Tone Rip
2016-08-23 by Mike Kirwan
I has a number of issues upgrading to Windows 10, the upgrade unfortunately changed the permissions on some directories and made them read only. Maybe related
Problems with Windows Version of Quad Tone Rip
2016-08-23 by brucerccampbell@...
For some unknown reason my Quad Tone RIp will not work anymore with Windoews 10. Any new ciurve is not saved. It appears the computer is just thinking about
Re: [QuadtoneRIP] fine tuning .acv curves
2016-08-18 by Stefan Christiansen
Richard, I m not yet scanning my 21-step targets with anything, but my eyes. Sorry if I didn t make this clear in the first place. But I do have a scanner and
Fw1: Catch discounts and be her hero!
2016-08-18 by tom
No powers for as many fornications as you want? http://mama.onetouchcreative.com/uvka/nvform.php?3808=mvq&743032=54687&ifuxwg=7366 tomHey all!If u find it
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-17 by brian@...
Sandy: Right now, I am working on making profiles for platinum printing. Thanks for the suggestion; I ll concentrate on those three colors (in my case, PK, Y,
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-17 by sanking@...
Brian, Are you making profiles for digital negatives for silver or for an alternative process? If for an alternative process, there are only three decent UV
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-17 by brian@...
W: I think you re pointing me in the right direction. Right now, my profile is using only three inks (black, cyan, and yellow - I am just getting started with
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-17 by forums@walkerblackwell.com
I do not know what profile you are using so I’m not sure if I can comment correctly but if it is under-inking than it will certainly show issues. I print
Re: [QuadtoneRIP] fine tuning .acv curves
2016-08-17 by richard@...
Stephan, There is a way you could have more control but it is going to take a little more than hand tweaking a Photoshop curve to do it—It won t much more,
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-17 by brian@...
Walker: I am not completely done with my diagnostics, but I did go through the head cleaning and alignment and also made a custom paper with settings that
Error message No data in Line 41
2016-08-17 by brucerccampbell@...
I am trying to establish a new curve .--- using a PC - windows 10 After I have selected Create a New Curve and entered all data and saved the file I get the
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-16 by forums@walkerblackwell.com
This is a head alignment issue compounded by the wrong thickness setting and/or platen gap and/or print speed and/or paper feed speed. What you need to do is
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-16 by brian@...
Sandy: That s a good question. They are vertical bands that appear in prints on Pictorico. They don t show up at all when printing on paper (with qtr or
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-16 by sanking@...
Are you sure these are pizza wheel marks? Pizza wheel marks are caused by the sharp little wheels that guide the media through the smaller 13 and 17
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-16 by brian@...
Walker: I was wondering about that. I will need to look into how to do this and can try this tonight when back home. Thanks, Brian
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-16 by forums@walkerblackwell.com
You can do this by creating a custom printer type in the printer. Quadtone rip does not set these values in the printer but you can do it directly on the
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-16 by brian@...
Yes, I can set the platen gap (to wider or widest) and I can print unidirectional (from the qtr driver), but I can t set the media thickness, printer line
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-16 by brian@...
Like I said, I can deal with them when I print through PS (and the negatives that come out are really clean), but I wonder whether there is something in the
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-16 by forums@walkerblackwell.com
wait. there are pizza wheels on the printer!? This is the first LF printer that I have seen that has pizza wheels. Oh no! W
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-16 by Mark Savoia
Can you make the tweaks on the printer? Gap, etc?? Mark stillrivereditions.com
Re: [QuadtoneRIP] P7000 Printer Installation Issues
2016-08-16 by brian@...
I installed qtr for my P7000 (using the p800 drivers - using the InstallP7000=... command - and it works quite well for making prints. When I try to make a
Where are these located?
2016-08-16 by Mark Savoia
Reading the QTR documentation it mentions a few files I can not find. ... The first type of file is the actually curve descriptor file that get installed in
Re: [QuadtoneRIP] QTR allows a flip but not invert for dig-negs. Yay!
2016-08-16 by forums@walkerblackwell.com
I recommend a cheap used iMac. I find the OS X side to be much more solid at this point. They can be gotten for the price of a nominal amount of our vary
Reading BW test targets with an X-Rite i1iO
2016-08-15 by yg_1@...
I ve recently had an old eye one iO upgraded to an i1iO and took the chance to change the 51 step wedge in my B&W test image to a format that the iO could read
Re: [QuadtoneRIP] QTR allows a flip but not invert for dig-negs. Yay!
2016-08-15 by Jim Thyer
As far as I can see the Windows version does not include this option. Wish it did as I need it for photogravure work. Jim Thyer From:
Re: [QuadtoneRIP] fine tuning .acv curves
2016-08-15 by Roy Harrington
Stefan, Most of this is pretty subtle but ... you asked about accuracy. On Mon, Aug 15, 2016 at 1:49 PM, Stefan Christiansen stefanchristiansen@yahoo.com
Re: [QuadtoneRIP] fine tuning .acv curves
2016-08-15 by Stefan Christiansen
Thanks for answering unclear questions. Not sure of what I want either, I ignore too much about linearizing with a spectro… I guess the droplet needs real
Re: [QuadtoneRIP] fine tuning .acv curves
2016-08-15 by Roy Harrington
Not sure if this is what you really want. But the PS .acv s are limited to 14 points and only 8-bit accuracy. If you use the QTR driver curves (explicit x,y
Re: [QuadtoneRIP] Issues with El Capitan?
2016-08-15 by forums@walkerblackwell.com
ElCap works perfectly. Been using it for a half year now. No problems. This is most likely a permissions issue or a curve issue or some other corruption.
Re: Issues with El Capitan?
2016-08-15 by tracy@...
If it were El Cap, then everyone with El Cap would see it, and there would be a lot of howling on this list. I m on 10.11.6, and my prints are fine, so the
Re: [QuadtoneRIP] QTR allows a flip but not invert for dig-negs. Yay!
2016-08-15 by Mark Savoia
Yah! Mark stillrivereditions.com ... Yah! Mark stillrivereditions.com On Aug 15, 2016, at 9:49 AM, forums@walkerblackwell.com forums@walkerblackwell.com
QTR allows a flip but not invert for dig-negs. Yay!
2016-08-15 by forums@walkerblackwell.com
Hey all. Keith Schreiber found this little gem in QTR. (I have no idea why I didn’t see it before!) He posted it on our private PiezoDN forum. As some of you
fine tuning .acv curves
2016-08-15 by stefanchristiansen@...
I still haven t found a better tool than PS to edit the .acv curves I use in QTR. I hate those tiny curve windows and inaccurate graphs. My profiles (for
Re: Banding On the Epson P800
2016-08-15 by john.sheets@...
Hi folks, Has there been any progress on this? I ve been experiencing a number of issues with banding using the P800 with QTR for diginegs for Pd printing. The
Re: Issues with El Capitan?
2016-08-14 by parkersmithphoto@...
Did a complete reinstall of latest version of QTR on my El Capitan 10.11.6 Mac, and I am still getting posterized prints from both Lightroom and PrintTool. The
Re: [QuadtoneRIP] Issues with El Capitan?
2016-08-14 by <hammonludiegxb@...>
Great, Thanks! Sent from Yahoo Mail. Get the app On Sunday, August 14, 2016 1:14 AM, Roy Harrington roy@harrington.com [QuadtoneRIP]
Re: [QuadtoneRIP] Issues with El Capitan?
2016-08-13 by Roy Harrington
Something that you think you did, didn t happen. I can t know what & why without you going through it all and actually showing what you are doing. Start from
Re: [QuadtoneRIP] Issues with El Capitan?
2016-08-13 by parkersmithphoto@...
Roy, I copied the same curves to both machines. Also did an UNINSTALL and reinstall on the El Cap machine. These Eboni 4K curves have worked beautifully on the