Yahoo Groups archive
Messages
Page 82 of 144 · 7194 messages matched
2004-12-19 by don hassler
Plan B Model 15! http://www.buzzclick-music.com/model_15.html Don Hassler USA --- lars_arnwald lars.arnwald@... > wrote: > > Hello, > > Back in the early 80's I had a Serge panel > consisting of NTO, PCO, > VCFX, DSG, plus some VCA, can't remember the model > today. This was > pl
2004-12-19 by lars_arnwald
Hello, Back in the early 80's I had a Serge panel consisting of NTO, PCO, VCFX, DSG, plus some VCA, can't remember the model today. This was played by a Lyricon Wind Driver, I did very little tweaking and it usually produced some fluegelhorn/subdued alto sax sound. I used it enti
2004-12-16 by Daniel Araya
Hi The panel with the two Oscillators that I have got two powercables, one goes the usual way jumpered between the cards and the other goes directly to the pitch-pots. I guess this is to minimize voltagedrops to get stable pitch from the pots. The second powercable does not carry
2004-12-15 by darkstr1746@comcast.net
The first of the two Osc panels has been sold. This one is going toSweden. One remaining panel: NTO / PCO(2) / VCM / TWS / XFAD(3) / MIX2 New $3560.00 ...... was $2500.00.... now $2300.00 Lack of response leads me to lower the price on this one. I can understand lack of interest.
2004-12-15 by James R. Coplin
It must be based on the panel. I had two panels originally. One of which had two braids but I was able to run all three braids on a PS2 no problem. So, apparently, it depends on the modules and the why fors of the second braid. James R. Coplin *************** If anyone asks of my
2004-12-15 by cuari7
--- In SergeModular@yahoogroups.com , darkstr1746@c... wrote: > that depends on what' on the rest of the layout. I'v had panels with only two Osc that had the double braid. A CV intensive panel will also have the double braid. > john duval > > -------------- Original message ----
2004-12-15 by kirkdegiorgio
all gone... sorry I didn't get back to all of you.. been away KD
2004-12-15 by darkstr1746@comcast.net
Attachments : that depends on what' on the rest of the layout. I'v had panels with only two Osc that had the double braid. A CV intensive panel will also have the double braid. john duval -------------- Original message -------------- you should treat a panel with two power conne
2004-12-15 by darkstr1746@comcast.net
try plugging two panels with the double power braids into a PS2 and see what ya get. Nothing john duval -------------- Original message -------------- --- In SergeModular@yahoogroups.com, John P wrote: >> Now this is something I never thought about.... so the panels with > double
2004-12-14 by ben vehorn
Hi all, I'm thinking of selling my Soup Kitchen panel. I'm sure everyone knows what this is, it's an amazingly deep audio processing panel that is perfect for integrating with other systems and studios (1/4" preamp in, 1/4" outs on mixer). It looks just like the one here: http://
2004-12-14 by ben vehorn
Apologies if this arrives twice, for some reason it didn't show up the first time... Hi all, I'm thinking of selling my Soup Kitchen panel. I'm sure everyone knows what this is, it's an amazingly deep audio processing panel that is perfect for integrating with other systems and s
2004-12-14 by ben vehorn
I have one panel with 3 NTOs, 3 PCOs and a /N Comp that requires 2 power connections. I was told that the connections even had to be placed on certain connectors of the distribution board, but I forgot which ones and I've been using it just fine with random placement on the board
2004-12-14 by mbw@cox.net
Attachments : --- In SergeModular@yahoogroups.com, John P wrote: >> Now this is something I never thought about.... so the panels with > double connectors need 2x the power..... Is that really so? The ratio really is twofold...? Oh, man!! Are you guys sure 'bout this...? Keep on
2004-12-14 by cuari7
--- In SergeModular@yahoogroups.com , John P wrote: >> Now this is something I never thought about.... so the panels with > double connectors need 2x the power..... Is that really so? The ratio really is twofold...? Oh, man!! Are you guys sure 'bout this...?
2004-12-14 by James R. Coplin
Actually, I would want the red, blue, purple, and brown. I'm swimming in the grey and greens. James R. Coplin *************** If anyone asks of my whereabouts, simply tell them i've gone out the window for a spot of tea and am not expected back any time soon. *************** > --
2004-12-14 by James R. Coplin
How much for the whole shooting match? James R. Coplin *************** If anyone asks of my whereabouts, simply tell them i've gone out the window for a spot of tea and am not expected back any time soon. *************** > -----Original Message----- > From: kirkdegiorgio [mailto:
2004-12-14 by kirkdegiorgio
Hi now my Serge is gone I have a surplus of hi-quality original Pomona branded banana cables. I'll sell them for $3.50 ea. (half the new price on Cynthia site). Buyer pays shipping from the UK (I can package them in cheap jiffy bags (45p-80p depending on size of order I guess)...
2004-12-13 by John P
Now this is something I never thought about.... so the panels with double connectors need 2x the power..... darkstr1746@... wrote: > It should be said that anyone with an interest in buying these panels > together should note that each panel has two power braids per chassis. > Bo
2004-12-12 by darkstr1746@comcast.net
It should be said that anyone with an interest in buying these panels together should note that each panel has two power braids per chassis. Both panels together will need at least a PS4 to drive them. kind regards john duval
2004-12-12 by darkstr1746@comcast.net
did ya like that one?? LOL the mail just flew of the screen before it got reorganized. So here it is. The first panel that went up for sale, and that was supposed to be sold..well, it didn't happen. bummer. So there are now two panels for sale. Both are basicaly OSc panels but on
2004-12-12 by darkstr1746@comcast.net
2004-12-11 by Hans Greuber
Hi; Honestly,I think that it would do better to the glass back where it was ,as my dictionary says.Or let the water runs as we say here. best ; Frank > >It seems alot of people were confused about this and thought it was just a reposting of the first panel i put up a couple weeks
2004-12-11 by darkstr1746@comcast.net
It seems alot of people were confused about this and thought it was just a reposting of the first panel i put up a couple weeks ago. This is a very similar panel but not the same one. kind regards john Cross posted for maximum coverage and confusion : ) more continuation of the "
2004-12-11 by kirkdegiorgio
wow - that was a bigger response than I imagined... the whole system has sold (incl. PS4 sorry Hans!) . regards KD
2004-12-11 by synpro@aol.com
In a message dated 12/11/2004 12:14:21 A.M. Eastern Standard Time, SergeModular@yahoogroups.com writes: The yearly renewal for both the hosting and domain name for serge-fans is coming up shortly. It's not much - approx $120.00 hosting for the year, plus the domain renewal, which
2004-12-11 by Les Mizzell
I would like to extend my thanks to the Serge Community in their support of serge-fans.com! We have actually surpassed my expectations at this point! I will be renewing the domain name for another 2/3 years and will also pay the hosting ahead for the next 18 months as well! Thank
2004-12-11 by darkstr1746@comcast.net
Cross posted for maximum coverage and confusion : ) more continuation of the "less is more" tour: From left to right" NTO / PCO(2) / VCM / TWS / XFAD(3) / MIX2 Cost new $3560.00 Sell... $ 2500.00 smokin' OSC and audio processing with loads of mixing ability. STS Oakland around '9
2004-12-10 by Ryan Ryan
Hey I am reducing all priceso f each pane by $100, $1250 for panel 1, $1400 for panel 2, and $1350 for panel 3 or sell all 3 panels including a good psu, and a woooden cabinet+power distribution. ill give this 2 or so more days at this price, and then to AH for the other price -r
2004-12-10 by kirkdegiorgio
no worries about the post going public Chris... and thx for the kind support. I do hope this will lead to an opportunity for somebody with more time and troubleshooting expertise to get their hands on a very nice (yet problematic) system. I tried your NCOM patch (my NCOM is on th
2004-12-10 by paradigmshiftbeats
Sorry, that last message was intended for Kirk alone.
2004-12-10 by paradigmshiftbeats
Kirk, SO sorry to hear about this, although I understand your decision given the struggle the system has been for you lately. I presume you'll keep the TKB to complement your Modcan? I wish I could be your buyer (though I'm no electronics wizard I am the kind of person to snag th
2004-12-10 by Les Mizzell
Good Evening, As many or you may know, or not ... under the direction of John P. I have been doing the design and coding plus paying for the hosting for www.serge-fans.com (and also when it was at the scampers.com/EGRES address as well. I've not asked the community for anything s
2004-12-10 by kirkdegiorgio
Dear list I have decided to sell my Serge system. As you may know I have had problems with 2 of these panels which I have detailed below. The panels were exposed to pollutants caused by me not properly covering up them up during some house renovations. You live and learn as they
2004-12-09 by Peter Grenader
There are two ways of adding VC to a Res EQ that come to mind. Both require A LOT of components, but I dare say would create really interesting results. A) Re-route the pots so they are used to open a vactrol on each bank. A simple passive summer would afford an external input as
2004-12-09 by John P
well john my thinking was to use maybe 3 or 4 or 5 vcfq's. When I use the res I don't think I really use all 10 bands in any given application..... say, I want to roll off some highs and give a bass boost with a weird hump in the midrange. If I had 3 vcfq's I could do that. So wi
2004-12-09 by synpro@aol.com
> maybe we can create a thread for this module like the one > on the SSG that is now posted on the Serge-Fans site. We must be on some incredible wavelength as I was messing with this module just last night and thinking the exact same thing! > I can't tell what the red STEP OUT j
2004-12-09 by Daniel Araya
Hi, My two panel Serge system was quite heavily modded but I removed most of the mods exept some of the most useful and also put in a few mods myself to cover all the holes in the panels! My DSG's are modded with cycle switches and also a switch for connecting the output to VC in
2004-12-09 by darkstr1746@comcast.net
So you have a panel of nothing but VCFQX (8) to replicate the ResEQ. How are you going to mix all of that? Multiple MIX2s? The beauty of the EQ with VC of each segment is that you only have to deal with one output. The "mixing" as it were is done within the module itself. However
2004-12-09 by darkstr1746@comcast.net
Anyone here have the last modification of the TKB??.... the Hotel Bus Station or whatever it's called? for some reason i keep wanting to call it the Hotel Tango Foxtrot.... must be a subliminal thing from my military experience. The little discussion on the mods for the ResEQ and
2004-12-09 by Tentochi
Analogue Heaven Mid-West (AHMW) Gathering 2005 has just been announced! ***** Saturday, March 26, 2005 ***** The AHMW Gathering has quickly become the premier event of its nature in North America. New this year is the addition of the Synth-DIY (SDIY) meeting as well. If you haven
2004-12-09 by Ryan Ryan
ahh forgot to mention, on panel 1 there's also a schmidt trigger. Ryan Ryan wrote: I'm going to give this a go on here first, and if it doesn't sell here then to AH, and if it doesnt' sell there, then to the ebay:-) only selling this cuz i just bought a big wiard modular to pay o
2004-12-08 by John P
I'm with you 100% on the benefits of the idea, and I was thinking about the jazzed up RES idea myself. But then it dawned on me... since I was thinking about getting some more filters anyway, that would be the way to go. And yes, you'd have to tune them first to whatever scheme y
2004-12-08 by not known
--- darkstr1746@... wrote: > Well, wouldn't you need to "tune" each filter to > correspond to it's counterpart on the ResEQ? this > idea was just off the top of my head......but on > further consideration, VC attenuation of each " eq > step" would negate the necessity of each ste
2004-12-08 by darkstr1746@comcast.net
Well, wouldn't you need to "tune" each filter to correspond to it's counterpart on the ResEQ? this idea was just off the top of my head......but on further consideration, VC attenuation of each " eq step" would negate the necessity of each step having it's own output. The common
2004-12-08 by cuari7
I would LOVE for the the DSG to have the option of giving a true attack/decay envelope, like the Buchla one. This is something we've discussed already here ad nauseaum, but boy, I still wish we had it. If any of you guys can do this mod, I'm willing to pay $$.......
2004-12-08 by John P
couldn't you just do this with a bank of say 4 VCFQ's + a mixer? Then when you're tired of listening to resonating spectra, you'd still have 4 VCFQ's + a mixer to do other things. darkstr1746@... wrote: > The VC of each Resonant step would be very cool and it is something > that
2004-12-08 by darkstr1746@comcast.net
The VC of each Resonant step would be very cool and it is something that i have mentioned to Rex for several years. The other thing i thought would be cool would be for each band to have it's own output and then a "mix" at the top. That would make for one rather large module don'
2004-12-08 by Peter Grenader
Note: the VCOs in this system are pre PCO and very sweet. The Envelope Generator is not the Extended ADSR, but the long-extinct AR. Pre transient generator and a really great module which will get down to about a 1ms cycle time and as long as about 6 minutes. VC duration, self cy
2004-12-08 by paradigmshiftbeats
--- In SergeModular@yahoogroups.com , John P wrote: > Anybody care to share some mods they like, or would like to see? I thought it would be neat to mod the DSG VC-IN so that when "both" is selected the incoming voltage affects the rise positively and the fall negatively (and vic
2004-12-08 by darkstr1746@comcast.net
I have a panel coming that has four ADSRs in it and a DTG. The DTG is split in half so that one half has the "sig in" jack and the other half has a "cycle" switch. The gate out is hard wired to the trigger in of all the ADSRs. Eash one of those has a two postiton switch which ena