Yahoo Groups archive
Messages
Page 62 of 168 · 8362 messages matched
2006-11-16 by Colin Fraser
> So that connection is only for old Roland gear?? The SYNC port will output either DIN SYNC, MIDI clock or both, depending on your particular P3. But all modes are output only. How do you need P3 connected up ? Best regards, Colin Fraser Sequentix Music Systems Ltd http://www.se
2006-11-16 by Graham Getty
Binar (aka Paul Nagle & Andy Pickford) put on a fantastic show at the NSC (National Space Centre, Leicester, UK) last Saturday. I took some pics, viewable from the concerts link at this site. www.synthmusicdirect.com Paul was using 3 P3's, you can just spot some of them in one or
2006-11-16 by Graham Getty
Ah, never noticed that. Great Idea. Thanks Colin! _____ From: analogue-sequencer@yahoogroups.com [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of sequentix Sent: 16 November 2006 09:36 To: analogue-sequencer@yahoogroups.com Subject: [analogue-sequencer] Wooden End Cheeks
2006-11-16 by Colin Fraser
> I need to have sync in from P3's sync midi connection. Is it > possible to set sync connection to in? The SYNC port is an output only. Best regards, Colin Fraser Sequentix Music Systems Ltd http://www.sequentix.com
2006-11-16 by Zed Velkovich
I need to have sync in from P3's sync midi connection. Is it possible to set sync connection to in? Regards, Zed --------------------------------- Sponsored Link $420,000 Mortgage for $1,399/month - Think You Pay Too Much For Your Mortgage? Find Out! [Non-text portions of this me
2006-11-16 by sequentix
Folks, As those of you waiting for end cheeks may have guessed from recent messages, they are all on their way out now. If you are waiting on some, and don't receive them inside the next week, please drop me a mail privately. The design of the end cheeks was changed slightly to s
2006-11-16 by simondynamitecomau
I'm also interested in buying a P3 pcb/kit/whatever. I'll get in line behind lobit12 and hal_414, if anyone wants to sell their P3. Thanks, Simon Canberra AUSTRALIA P.S. Could Colin produce another run of pcb's, if demand is high enough? If so, how many sales would be needed befo
2006-11-16 by hal_414
have been looking for awhile, saw only 1 post or so for a ready unit awhile back or so..not looking for pcb or parts, just a fully working unit would be a godsend.. so once lobit12 gets his .. i would like to be next in line :) also live in the usa if that helps.. sucks that when
2006-11-16 by Steve
I'm not sure if how many of you may be interested, but I received the wooden end cheeks for my P3 today, installed them, and took a few photos of the sequencer. As I'm now considering the (assembly) project complete, I figured I would post a link to the photos here, if anyone is
2006-11-15 by bambam4236
Hmm its back again to haunt me so replacing the cable didnt fix it. I got drastic last night and swapped the display for a spare i bought just in case id need it in the future. Its back to normal again..................for now. If it stays fixed do you think it may have been a fa
2006-11-15 by profpep
I discovered the P3 a bit late, and the current production run is over. On the off chance, is there anyone here who has, for any reason, given up on a kit, and would like to sell it? I'm a professional electronics engineer, and built a lot of analogue and early dig gear in the ei
2006-11-13 by tonylight222
Hi Dave Yes was the .net Framework I've install it and now work fine!! Nice interface!! thx for the work :-) Ciao Tony --- In analogue-sequencer@yahoogroups.com, "em_dkj" wrote: > > Hi Tony > > Have you run P3Tools before on that PC? > If not, make sure you have installed the Mic
2006-11-13 by em_dkj
Hi Tony Have you run P3Tools before on that PC? If not, make sure you have installed the Microsoft .Net Framework version 1.1, (See the manual for info on that), and copy over all the files contained in the zip file before you run it. Dave --- In analogue-sequencer@yahoogroups.co
2006-11-12 by bambam4236
Hi colin i have a newer one so i dont think its the transistor and after playing around with it a bit more and double checking and recrimping the cable it appears to work fine...if it returns ill try a new cable. Thanks again for the info and hope you enjoyed your trip. Brett ---
2006-11-12 by bambam4236
big thanks dave......for all your efforts with p3 tools. Brett --- In analogue-sequencer@yahoogroups.com, "em_dkj" wrote: > > Hi Brett > > I'll upload the latest manual shortly. > It will be inside the zip for the latest version of P3Tools (1.09) > which I shall also upload short
2006-11-12 by tonylight222
Hi Dave I'm try the p3tools 1.09 for the 1°time, on a win xphome, but when I click on p3tools.exe appear this message: application not correctly inizialaze and quit!! I've copy the unzip file on the hdd! Thx for the help! Tony --- In analogue-sequencer@yahoogroups.com, "em_dkj" w
2006-11-10 by em_dkj
Hi Latest version of P3Tools has just been uploaded. Changes are as follows. · Add the additional User config options that were added to the final version of 3.1.006 firmware. · When a bank is copied the bank tempo and bank program is copied as well. · Remove screen clutter by on
2006-11-10 by em_dkj
Hi Brett I'll upload the latest manual shortly. It will be inside the zip for the latest version of P3Tools (1.09) which I shall also upload shortly Cheers Dave
2006-11-10 by eas
i have 2 woods, how much do you pay for ? mikesonic77 schrieb: > > hi everybody. > my second-hand p3 arrived last week and there were no rack ear included. > has anybody here a pair of p3 rack ears for sale? > please send me a message. > thanks mike > >
2006-11-10 by mikesonic77
hi everybody. my second-hand p3 arrived last week and there were no rack ear included. has anybody here a pair of p3 rack ears for sale? please send me a message. thanks mike
2006-11-09 by Colin Fraser
> I have just been using my P3 again and noticed some very weird > behaviour from the display...the sequencer appeared to function as > normal though. Some of the things i saw were : The display module is a little computer in its own right. Weirdness of the sort you describe is u
2006-11-09 by Colin Fraser
Just catching up after my trip to Amsterdam... finally got my head back home a few days after my body arrived ! > I updated my P3 with the latest bootloader 3.3 to fix the corruption > issue and then updated from OS 3.1.006B to OS 3.1.006C yesterday but > wnated to confirm that r
2006-11-09 by bambam4236
Thanks Andy It seemed to come good but i flashed it anyway and used it for a good 4 hours straight yesterday with no problem ;) I just hope the problems gone and i dont have one of those things that reasrs its ugly head every few weeks! Thanks for the advice Brett --- In analogue
2006-11-08 by tr8884
--- In analogue-sequencer@yahoogroups.com, "Eyesaw" wrote: >I use the P3 as a master clock controlling a MAQ 16/3 and it works very well. > Good Day Sequentixers: > > How well would the P3 handle sequencing midi data to control a MAQ 16/3 and an Electrix Repeater? Thanks, Bill >
2006-11-06 by Andy Wilson
Hi Brett, I think the first thing to do is perform a memory initilialisation by holding F1 and step key 7, then powering on the P3. Continue holding the keys until the display shows 'Wiping ALL Data!', then press both F1 and F2 to confirm. This should flush out any residual garba
2006-11-06 by bambam4236
I have just been using my P3 again and noticed some very weird behaviour from the display...the sequencer appeared to function as normal though. Some of the things i saw were : Pressed play/edit to go out of edit mode and the duisplay showed tap in the top left corner and nc on t
2006-11-06 by bambam4236
I updated my P3 with the latest bootloader 3.3 to fix the corruption issue and then updated from OS 3.1.006B to OS 3.1.006C yesterday but wnated to confirm that rev C doesnt display the revision on startup? I just wasnt sure as rev B included the B in the startup display thats al
2006-11-06 by bambam4236
Hi all i was wondering if there is a manual for p3 tools version 108? I found the p3toolsnotes.pdf in the .zip for version 106 but have found nothing in the group or online for version 108. Is there a new version or is the 106 guide suitable? thanks Brett
2006-11-02 by Colin Fraser
> Might be handy in some situations, but it'd have to be a different > key-combo though. Indeed - I quite often use arming of anm active track just to reset the playlist on the fly. > One thing that I'd really like is for the "Play/Edit"-key to also be > sticky in playlist mode i
2006-11-02 by ch.³l
--- In analogue-sequencer@yahoogroups.com, "eigentone2000" wrote: > > Dear Colin, > > Added 'armed' track mode - hold STEP MODE then press TRACK key; track > will reset (playlist and pattern) and unmute on next gbar reset. > > That's great, thank you for the excellent support. >
2006-11-02 by eigentone2000
Dear Colin, Added 'armed' track mode - hold STEP MODE then press TRACK key; track will reset (playlist and pattern) and unmute on next gbar reset. That's great, thank you for the excellent support. Would it be a big thing for you to add: Added 'disarmed' track mode - hold STEP MO
2006-11-02 by defriesepoort
here my music! part1; (six tracks) http://www.archive.org/details/Eppie_E_Hulshof_Historic_Edition part2; (six tracks) http://www.archive.org/details/Eppie_E_Hulshof_Historic_Edition_Part2 part3 wil be posted next week. enjoy Ep. von Haulshoven
2006-11-02 by Paul Nagle
On Wed, 1 Nov 2006 19:10:11 -0500, "Eyesaw" wrote: >Colin - What, is there a concert of Gong folks coming up? Check www.planetgong.co.uk but I think the only place you can now buy tickets is at the venue itself (the Melkweg, Amsterdam). It'll be a hoot! Paul --- Paul Nagle - Join
2006-11-02 by Eyesaw
Colin - What, is there a concert of Gong folks coming up? Bill ----- Original Message ----- From: sequentix To: analogue-sequencer@yahoogroups.com Sent: Wednesday, November 01, 2006 1:50 PM Subject: [analogue-sequencer] OT: Gong Hey people, Just wondering if anyone else is off to
2006-11-01 by ferrograph632
>>Just wondering if anyone else is off to another planet this weekend
2006-11-01 by sequentix
Hey people, Just wondering if anyone else is off to another planet this weekend ? There are at least four of us headed to the milky/oily way ;-) Would be nice to put faces to names... Best regards, Colin Fraser Sequentix Music Systems Ltd http://www.sequentix.com
2006-11-01 by sequentix
Folks, For those of you still waiting on wooden end cheeks for your P3, my apologies for the time these have taken. I've been promised they will arrive this week, and will be sent on as soon as I have them. The slowness in getting them is down to the insignificant size of my orde
2006-10-31 by brett x
Thanks Colin Quick on the answers as usual ;) theres a pic or two of my p3 now in the pics section. time to go more P3 to play with...well after work :( Brett _________________________________________________________________ Research and compare new cars side by side at carpoint.
2006-10-31 by Kev Gallagher
Hi Colin, yes it goes straight to that on power up though i've just tried again and display reads slightly different but still frozen: WROTE PAGE 0A10 SEND MORE DATA I wish i hadn't tinkered with my set up now... Kev. --- Colin Fraser wrote: > > > Shortly after i went to my P3 to
2006-10-31 by Colin Fraser
> Shortly after i went to my P3 to see it's display now reads: > > WROTE PAGE 0E10 > SEND MORE DATA.. > > I've tried to perform sysex upgrade and even initialisation on re- > start (even though i don't really want to loose all my data), but > the display will not show anything bu
2006-10-31 by kevgall20
Hi there Colin and forum, i'm hoping i can recover my P3 from what looks like a serious error that happened a while ago. My laptop seemed to object to my M-Audio Midi patchbay for the first time and shut down showing the blue screen and error info. re. maudio-usb including a note
2006-10-30 by Colin Fraser
> the cable is soldered in exactly the way you described it, im almost > sure that its ok. > my serial# is 1011 -is that late ? #1011 is an early unit, and it was hard-wired for MIDI sync. Switching it over to DIN sync is not too hard if you have some soldering experience. The co
2006-10-30 by Colin Fraser
> I did try to play with some of the accumulators but i found pressing > key 4 for the accumulators event group from the AUX config page did > absolutley nothing. I have done some digging and am i right in > thinking its fixed in 3.1.006C? My P3 came loaded with 3.1.006B and > i
2006-10-30 by bambam4236
Well finally after the 'fun' of getting everything\parts together my P3 finally got powered on on Saturday and well now i know its worth all that scrounging to get this together...even with the little i have delved into it so far i am blown away, yeah i read about all the feature
2006-10-30 by eas
hello colin the cable is soldered in exactly the way you described it, im almost sure that its ok. my serial# is 1011 -is that late ? Colin Fraser schrieb: > > >> i try to sync a mc 202 to the p3?s sync out. >> friend of mine soldered me a cable (roland din sync - pin >> 1,3,5 fr
2006-10-30 by Paul Nagle
em_dkj wrote: > Paul ... I presume you are refering to the NSC. > I've got my ticket, and I'm really looking forward to it now! > Cool, that's one sold then ;) I'm looking forward to it also; I believe it's the last gig at the NSC and as it's been a really great venue for us, I w
2006-10-30 by Colin Fraser
> i try to sync a mc 202 to the p3?s sync out. > friend of mine soldered me a cable (roland din sync - pin > 1,3,5 from a > midi cable) , as soon as i plug it in the 202, > the internal sequencer stops running ... > are there different types of roland din sync ? > from the manual
2006-10-30 by eas
hello i try to sync a mc 202 to the p3?s sync out. friend of mine soldered me a cable (roland din sync - pin 1,3,5 from a midi cable) , as soon as i plug it in the 202, the internal sequencer stops running ... are there different types of roland din sync ? from the manual it look
2006-10-30 by em_dkj
> Hehe, it's just some assorted ideas for a gig in two weeks. Paul ... I presume you are refering to the NSC. I've got my ticket, and I'm really looking forward to it now! Are you taking all 3 of the wee beasties along then? Dave
2006-10-30 by Eyesaw
Ok, so if one of you current owners wants to sell your P3 please send details direct to eyesaw@ptd.net. Thanks, Bill in Lititz, PA U.S.A. ----- Original Message ----- From: Eyesaw To: analogue-sequencer@yahoogroups.com Sent: Sunday, October 29, 2006 10:25 AM Subject: [analogue-se