Yahoo Groups archive
Messages
Page 61 of 168 · 8362 messages matched
2006-12-05 by Hans Greuber
Hi; I´ve been trying to convince Colin to do something about this.. My famous 202 mode... I got another vote.. yehaa! Hans > > Please forgive my English but what do you mean with being > > able to turn lots of steps on/off in parallel? Do you want to > > be able to push all butto
2006-12-05 by ch.³l
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > My idea was that melodies/lines are normally of variable note > > length. Not only the placing (which of the steps) but also > > the length make it funky. Also in musical notation > > (English?:written music), t
2006-12-04 by Eric
Hi Paul, Thanks for your reply. I've tried length 13 but that one holds the note until a next note comes. When using this there aren't any spaces between the notes. Length 13 is a nice feature but not for what I mean. Cheers, Eric ----- Original Message ----- From: Paul Nagle To:
2006-12-04 by Colin Fraser
> Please forgive my English but what do you mean with being > able to turn lots of steps on/off in parallel? Do you want to > be able to push all buttons at the same time (or 10 if you > only use your hands..) to enter as many notes? Yes. The TR909, for example, does not let you
2006-12-04 by Eric
Hi, Please forgive my English but what do you mean with being able to turn lots of steps on/off in parallel? Do you want to be able to push all buttons at the same time (or 10 if you only use your hands..) to enter as many notes? My idea was that melodies/lines are normally of va
2006-12-04 by Colin Fraser
As Paul suggested, note length 13 is the way to make long notes easily. > On the Mobius you just hold the first step and then push the > last. This worked very simple and easy. Now I haven't > discovered how to do it like this on the P3 (am I missing something?). P3 doesn't work
2006-12-04 by Paul Nagle
On Sun, 3 Dec 2006 23:40:44 +0100, "Eric" wrote: >Note length 12 is not long enough and setting the following steps to the same note, gate to on and then tie all of them isn't really practical/intuitive (takes a lot of time and it's necessary to have a 'plan' not just experimenti
2006-12-03 by Eric
Hi Collin & List, I have a question about note lengths... Earlier I used to have an FR Mobius which was nice but only featured 1 channel. I would like to program a pattern with different note lengths so for example notes of 2/16th or 3/16th. On the Mobius you just hold the first
2006-12-03 by Jack Deckard
Hi Colin, would you care to comment on, assuming all the P3 kits are built, how many P3 are there in existance? Thanks. Jack Deckard (Does anyone own a Cwejman S1 MK2 and a P3? If so, email me, I'm probably going to take the plunge after Christmas).
2006-12-03 by Paul Nagle
.... that the P3 doesn't just do "aeolian". www.bogusfocus.com/pn/mp3/BlameGandHowardG.mp3 It could be around 15Mb I think. Told you it was self-indulgent. Very high quality MP3(tm). Song only lasts 16 seconds too. Amazing technology when you think about it. But I shan't and you
2006-12-02 by Colin Fraser
> But I can´t get any tie effect with the 13 lenght thing.. > > May I got some further explanation please? A length of 13 tells P3 to hold the note on a step until the next active step comes along. It holds the note over any inactive steps between the length 13 note and the next
2006-12-02 by Hans Greuber
Hi; I have reminded how the P3 worked after two years stopped... But I can´t get any tie effect with the 13 lenght thing.. May I got some further explanation please? Thanks; Hans _________________________________________________________________ Grandes éxitos, superhéroes, imitac
2006-11-30 by turbotron69
Hi; And to include silences.. as the 101? I guess there is no silence key... so you have to enter dummy notes and then step them off? Hans > > > > > > will the P3 let you input simple 'one note at a time' sequences as > > > easy as say with an SH-101? > > > > > > I don't think it
2006-11-29 by bambam4236
Hi I'm sorry if this is in the manual but i have searched it and the archives and i cant find the answer. I only finished my P3 a few weeks ago so am still in a steep learning curve.....mind you its a fun curve ;) A simple example of what i am trying to do is this. I set auxA to
2006-11-29 by sad1robot@aol.com
in case any other Mac/ P3/ pro tools users are going to update the P3 OS . . i used the MIdi file version of the latest Beta 3.1.6 and at first was getting BAD data.. .only on the first burst block sent to the P3. i nudged the file over a bar on the pro -tools grid , creating a p
2006-11-28 by Dave Magnuson
Have you checked for a MIDI feedback loop? Maybe the P3 is echoing back to the MIDI interface or vice-versa. Dave ----- Original Message ----- From: "turbotron69" To: Sent: Tuesday, November 28, 2006 11:38 AM Subject: [analogue-sequencer] Re: Mac OS X BAD DATA > Colin and folks;
2006-11-28 by turbotron69
I got It... Just went to friend's studio and installed there on a PC.. Thanks! > I thought about that.. I happen to me some years ago.. > > I just can´t remember how can I know or how can I solve it.. > > I got no midi out cable on the P3... and just one cable from the midispost
2006-11-28 by Colin Fraser
> I got no midi out cable on the P3... and just one cable from > the midispost 8X8.. There's a small possibility your MIDI input stage is marginal, and large blocks of data don't work. You could check that by doing a dump of your pattern data, and seeing if it can load back in wi
2006-11-28 by turbotron69
I thought about that.. I happen to me some years ago.. I just can´t remember how can I know or how can I solve it.. I got no midi out cable on the P3... and just one cable from the midispost 8X8.. Thanks > > > Bad Data whatever I do... I even changed the midi cable.... > > If it
2006-11-28 by Colin Fraser
> Bad Data whatever I do... I even changed the midi cable.... If it wont accept p3-bootloader-v3.1-T89.syx make sure you haven't got a MIDI loop back to the P3. Its own ACK message will cause a BAD DATA, as it shouldn't see it coming back. Best regards, Colin Fraser Sequentix Mus
2006-11-28 by turbotron69
Colin and folks; Bad Data whatever I do... I even changed the midi cable.... I got a midisport 8X8 and the P3... I don´t have installed logic now.. just trying with sysex library 1.1... always bad data.. My P3 is a kit made early version as Colin knows.. Any Help please? Thanks;
2006-11-28 by Nick Rothwell
On 28 Nov 2006, at 03:09, turbotron69 wrote: > Using Sysex librarian and MAC OS X 10.3.9 , says bad data all the > time.. I'd guess it's a problem with the data file - perhaps it was corrupted when you downloaded it? I use Macs as well - Max/MSP has a Standard MIDI File playing o
2006-11-28 by Colin Fraser
> I´m trying to install latest os on P3, latest one has two years on... To upgrade to version 3.1.xxx from 3.98 you first need to install the bootloader update. That will change the Sysex ID used for the dumps to the official Sequentix ID. You'll find the necessary files in the Y
2006-11-28 by turbotron69
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > > > > will the P3 let you input simple 'one note at a time' sequences as > > easy as say with an SH-101? > > > > I don't think it does. > > > > But I really wish it did. > > It does - use arpeggio capture, and t
2006-11-28 by turbotron69
Hi; I´m trying to install latest os on P3, latest one has two years on... Using Sysex librarian and MAC OS X 10.3.9 , says bad data all the time.. I watched the messages but no one was using mac but pc.. Please give me a hand... Thanks Hans
2006-11-27 by Colin Fraser
> is there a new run of producing the PCB's for the P3? Or is there any > other opportunity to get the PCB's? So few of the last run of P3 boards were sold in kit form, it wouldn't be cost effective to have another run made just for kits. Sorry. Best regards, Colin Fraser Sequent
2006-11-26 by compuzik
Hi sequencing folk, is there a new run of producing the PCB's for the P3? Or is there any other opportunity to get the PCB's? I've built a MAQ16/3 and now I would do the next higher step: the P3! Greetings from Achim aka compuzik from Germany
2006-11-26 by Colin Fraser
OK, I think we're done with this discussion... Best regards, Colin Fraser Sequentix Music Systems Ltd http://www.sequentix.com
2006-11-25 by turbotron69
--- In analogue-sequencer@yahoogroups.com, eas wrote: > > hans > > > it seems you are using a lots of terms without the slightest idea what > they mean. > better get a bit of a solid understanding before you ask all at once. > > > > worst regards > andreas > Perhaps most idea of
2006-11-24 by turbotron69
Sorry; I don´t have the sequencer at hand. Some options were incluided to my request,as early owners as myself liked the idea,You? Why don´t you go out there and buy some of my no midi recorde live records? I've lost touch of my english a bit but enough to dedicate you a Tony Mon
2006-11-24 by eas
hans it seems you are using a lots of terms without the slightest idea what they mean. better get a bit of a solid understanding before you ask all at once. worst regards andreas
2006-11-24 by efexx99
Hi, I will be trading a nearly new p3 for a monomachine. The p3 is really great, but I ran into some financial problems so i can´t afford a good synth in the next months for it and softwaresynths aren´t my thing. So I would trade it for a monomachine. I think this would be the be
2006-11-24 by ivancu@aol.com
>No, they were an extra cost option at 15ukp. >I have some spare if you want them. Thanks for the clarification! Ivan [Non-text portions of this message have been removed]
2006-11-24 by Hans Greuber
Hi; Yes it wasn´t in the manual.. I don´t have the P3 at hand until tomorrow. I´ll open the rest of the studio since two years wow! How can be deactivate steps to do a long 13 tie.. I mean if you have a existing pattern where all notes long same... you want to third note long let
2006-11-24 by Hans Greuber
Hi; Ey folks ,Do you know of any minimal,techno or whatever genre made with P3? Since I quit to now , Richie must have used it a lot... among others..lots of shuffle in nowadays minimal.. as spanish AlexUnder guyl very good stuff... Bye! __________________________________________
2006-11-24 by Hans Greuber
Hi Paul; Nice talking to you again! I´ve been reading the latest manual a bit.. I thing that 13 must be kind of tie ... Is it? Does it now include shuffle patterns? Sorry not enough time to read it all... Thanks bye! > >turbotron69 wrote: > > I would like to know what has been im
2006-11-23 by Colin Fraser
> I´ve been reading the latest manual a bit.. I thing that 13 > must be kind of > tie ... Is it? I think length 13 was added after the last release, so it wont be in the manual. Anyway... a length of 13 means - hold this note until another note comes along. So if you have a step
2006-11-22 by Paul Nagle
turbotron69 wrote: > I would like to know what has been improved to the machine.. If any other mode to > introduce lenght mode as my 202 mode... > Hey Hans, you might want to load the latest OS and experiment with a length value of 13. Not exactly 202 mode but very, very cool. Gl
2006-11-22 by turbotron69
Hi Colin and folks; I want to return to music..after two years due to a health problem . I sold much of my analogue beast and machines but kept the P3 and the smashed Delta HF.. I would like to know what has been improved to the machine.. If any other mode to introduce lenght mod
2006-11-22 by Jesse
I don't believe so, you had to pay xtra for them... If I am wrong, where my cheeks at!!! ----- Original Message ----- From: ivancu@aol.com To: analogue-sequencer@yahoogroups.com Sent: Wednesday, November 22, 2006 11:47 AM Subject: [analogue-sequencer] Wood end cheeks I might have
2006-11-22 by ivancu@aol.com
I might have missed it, but were the wood end cheeks supposed to be included with all enclosure kits that were sold? Ivan ________________________________________________________________________ Check out the new AOL. Most comprehensive set of free safety and security tools, free
2006-11-22 by Colin Fraser
> I might have missed it, but were the wood end cheeks supposed to be > included with all enclosure kits that were sold? No, they were an extra cost option at 15ukp. I have some spare if you want them. Best regards, Colin Fraser Sequentix Music Systems Ltd http://www.sequentix.co
2006-11-22 by bambam4236
Sorry if this has been asked or is somewhere in the manual but i have searched with no luck :( I just wnated to check how i return a sequence to 'normal' after using say a note accumulator. a simple example would be if i turn on a note accumulator on step1 and set it to one...thi
2006-11-20 by mikesonic77
i´m still searching for a pair of rack ears. not the wood end cheeks mike --- In analogue-sequencer@yahoogroups.com, eas wrote: > > i have 2 woods, how much do you pay for ? > > > > > > mikesonic77 schrieb: > > > > hi everybody. > > my second-hand p3 arrived last week and there w
2006-11-18 by Steven Clements
huh?
2006-11-18 by Steven Clements
--- In analogue-sequencer@yahoogroups.com, "Steve" wrote: > > I'm not sure if how many of you may be interested, but I received the wooden end cheeks for > my P3 today, installed them, and took a few photos of the sequencer. As I'm now considering > the (assembly) project complet
2006-11-18 by lobit12
2006-11-16 by Colin Fraser
> I need DIN Sync in or out, selectable in user configuration. > Handy for a use in a studio. I had originally planned to make the DIN sync port bi-directional, and used an interrupt input on the CPU for the CLOCK. But it turned out the interrupt could only be triggered on a nega
2006-11-16 by Zed Velkovich
I need DIN Sync in or out, selectable in user configuration. Handy for a use in a studio. My fiends zocks box has this and it helps a lot. Zed. Colin Fraser wrote: > So that connection is only for old Roland gear?? The SYNC port will output either DIN SYNC, MIDI clock or both, de
2006-11-16 by Zed Velkovich
So that connection is only for old Roland gear?? Colin Fraser wrote: > I need to have sync in from P3's sync midi connection. Is it > possible to set sync connection to in? The SYNC port is an output only. Best regards, Colin Fraser Sequentix Music Systems Ltd http://www.sequenti