Yahoo Groups archive
Messages
Page 59 of 168 · 8362 messages matched
2006-12-30 by Colin Fraser
> when connecting a synth at the Sync output, I get a 'MIDI > communication error' on the synth. I've got board v 1.5 and would like > the MIDI as well as the DIN sync option. So I soldered R36, R24, R25 > and two diodes on D2 and D3, but omitted the resistors on D4 and D5. > The
2006-12-30 by niels_jitterbug
Hi, when connecting a synth at the Sync output, I get a 'MIDI communication error' on the synth. I've got board v 1.5 and would like the MIDI as well as the DIN sync option. So I soldered R36, R24, R25 and two diodes on D2 and D3, but omitted the resistors on D4 and D5. Then I so
2006-12-30 by niels_jitterbug
I was reading through some posts here on the forum regarding extra control over the P3 without using menu pages and there were some suggestions about a P3 MKII or even a P4, with an altered user interface with more dedicated control. Does it make sense to suggest that maybe a 'co
2006-12-30 by niels_jitterbug
Yes! thanks for your quick problem solving. no more 'BAD DATA'... I've used MIDIOX to send the Sysex patch, then updated the bootloader and then the OS to 3.006. Everything works just fine ! --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > > > My P3 works just
2006-12-30 by Colin Fraser
> My P3 works just fine, but I wanted to update from 3.001 to 3.006. > Since I have a #2004 CPU, I thought I had to update the bootloader as > well ? > Everything I do, I get the same message BAD DATA. There was a change in the bootloader at the same time as I released v3.1.002 t
2006-12-30 by niels_jitterbug
Hi, My P3 works just fine, but I wanted to update from 3.001 to 3.006. Since I have a #2004 CPU, I thought I had to update the bootloader as well ? Everything I do, I get the same message BAD DATA. When I start it up holding Func+Page, I get Checksum = B19A. I play the midi file
2006-12-30 by Colin Fraser
> --- In analogue-sequencer@yahoogroups.com, "turbotron69" > wrote: > > > > I tried to install an older OS and seems that unit can´t > delete some of it´s memory and > > can´t load all data..just the half.. > > > > Now it shows CHK FAIL = 424A > > > > Help please! > > > > Hans >
2006-12-30 by Hans Greuber
Hi; I have for sale a Sequential Circuits Model 800 sequencer.. Photocopied manual and schemos. Looked cool at my home entrance.. Asking 400 euros Thanks; Hans _________________________________________________________________ Acepta el reto MSN Premium: Correos más divertidos con
2006-12-30 by turbotron69
--- In analogue-sequencer@yahoogroups.com, "turbotron69" wrote: > > --- In analogue-sequencer@yahoogroups.com, "turbotron69" wrote: > > > > > > Hi; > > > > I just tried to install the latest OS but.. after charged all data it shows; CHK FAIL =56 EA > > > > Unit doesn´t work any m
2006-12-30 by turbotron69
--- In analogue-sequencer@yahoogroups.com, "turbotron69" wrote: > > > Hi; > > I just tried to install the latest OS but.. after charged all data it shows; CHK FAIL =56 EA > > Unit doesn´t work any more > > Thanks; > > Hans > Hi ; I tried to install an older OS and seems that unit
2006-12-30 by turbotron69
Hi; I just tried to install the latest OS but.. after charged all data it shows; CHK FAIL =56 EA Unit doesn´t work any more Thanks; Hans
2006-12-28 by Colin Fraser
Hi Koen, > I have a P3 #1014. I didn't do any update yet. > Now i want to do an update. > Do i need a new bootloader? > What is the bootloader? There are two separate programs that are stored in the P3 flash ROM. One is the bootloader, the other is the sequencer. The bootloader a
2006-12-28 by Koen Buytaert
Hello First of all best wishes for 2007 Collin and all the members of this group. I have a P3 #1014. I didn't do any update yet. Now i want to do an update. Do i need a new bootloader? What is the bootloader?
2006-12-28 by vonhaulshoven
hey evryone, I made a space/ambiënt/berlin school album together with Phrozenlight. You can freely download it here, http://www.archive.org/details/Dutch_Space_Mission hope you have a good time while listening Ep.
2006-12-27 by Colin Fraser
> eigentone2000 wrote: > > Hi, could somebody explain the "Gate edit mode 2"? > > > When you turn it on, you can hold down a gate, then hold down > a second > gate further along. The P3 will automatically create copies > of the first > note, setting tie on for each step into each
2006-12-27 by Paul Nagle
eigentone2000 wrote: > Hi, could somebody explain the "Gate edit mode 2"? > When you turn it on, you can hold down a gate, then hold down a second gate further along. The P3 will automatically create copies of the first note, setting tie on for each step into each step between th
2006-12-27 by eigentone2000
Hi, could somebody explain the "Gate edit mode 2"? Thanks, Mario
2006-12-27 by Hans Greuber
>James Brown is deeead!! (8) > > > > > >From: darkstr1746@comcast.net > >To: analogue@hyperreal.org (list) > >CC: SynthSights@yahoogroups.com (synthsights) > >Subject: [AH] RIP James Brown godfather of Soul > >Date: Mon, 25 Dec 2006 20:32:10 +0000 > > > >. . and no bitching about
2006-12-27 by Hans Greuber
James Brown is deeead!! (8) >From: darkstr1746@comcast.net >To: analogue@hyperreal.org (list) >CC: SynthSights@yahoogroups.com (synthsights) >Subject: [AH] RIP James Brown godfather of Soul >Date: Mon, 25 Dec 2006 20:32:10 +0000 > >. . and no bitching about being off topic : ) >G
2006-12-26 by josh
PLEASE :D I've kidnapped my friends P3 for a couple of weeks, but I think he's gonna be wanting it back. I just wanted to post this now, so please keep me in mind (I know there are more than a few of you with multiple P3s ;D). Thanks, and happy sequencing. -josh
2006-12-25 by Colin Fraser
Hi Jay, > When I try to enter the Firmware Upgrade Mode the display > never shows what's supposed > to come up as illustrated in the manual. > > Most of the time I get one line showing: > > "v3.3 CHK = " > > and nothing else. The P3 would just freeze right there. > > But the resu
2006-12-24 by jaynothing
Hi, I just spent an hour trying to solve the following problem with no success. So if Colin or anyone else could come up with a solution that'd be greatly appreciated. When I try to enter the Firmware Upgrade Mode the display never shows what's supposed to come up as illustrated
2006-12-24 by Miguel Mendoza
Brilliant!!! I'll download right now, no more searching CCs on the synths manuals. Thanks Colin and Merry Christmas to everybody. ----- Original Message ----- From: sequentix To: analogue-sequencer@yahoogroups.com Sent: Sunday, December 24, 2006 6:58 PM Subject: [analogue-sequenc
2006-12-24 by sequentix
Folks, Just a quick one before Christmas ;-) v3.1.007 beta 10 is in Yahoo files now. This adds a second page to the aux config menu for a couple of new functions. If you press PAGE at the usual save/next/lose options, you will see "learn" and "teach" under F1 and F2. Learn will a
2006-12-22 by lobit12
p3 experts: if i wanted to set up my p3 as a realtime midi looper, where track one would be a short 8 step sequence track 2, 16 step, track 3, 32 step up to 64 step, whats the quickest way to set that up? also is there a quick way to set up a multi bar preference for say having a
2006-12-21 by Colin Fraser
> And when will the P4 be released? Any idea? It'll be a good while yet. Best regards, Colin Fraser Sequentix Music Systems Ltd http://www.sequentix.com
2006-12-20 by bambam4236
Hi Colin Thanks for the reply.....glad i wasnt missing something obvious here. Yeah if you could squeeze it in i think it would be a great feature. I can easily see it being very worthwhile with rel note offset but i'm sure a few other aux's woudl ebnefit from it......so is there
2006-12-20 by Graham Getty
Presuming you have a pattern with only alternate notes switched on, you can "sorta" simulate a morph into a 2 pattern mode by halving the timebase and turning on all the gates. As long as you've pre-prepared all the notes you're switching on it can produce some quite interesting
2006-12-20 by darkstr1746@comcast.net
yea it's only 8 steps but you can string the steps together ( 16 sets of 8 steps ). Yea, it's a hair puller but once you ge used to it it's not so bad. Even though i couldn't get on with the P3, it's functionality was far greater than the Signal Arts. So take that Paul!!. . see.
2006-12-20 by darkstr1746@comcast.net
uh . . . no. LOL i like the things about the other sequencers that are responsible for me losing my hair sooner than expected! LMAO!! kind regards john d -------------- Original message -------------- From: "Richard" to be fair, part of the P3s stated reason to be has been to pul
2006-12-20 by Miguel Mendoza
And when will the P4 be released? Any idea? ----- Original Message ----- From: Colin Fraser To: analogue-sequencer@yahoogroups.com Sent: Wednesday, December 20, 2006 12:16 PM Subject: RE: [analogue-sequencer] Hello &idea/question RE: editing patterns within playlists... > My idea
2006-12-20 by Richard
to be fair, part of the P3s stated reason to be has been to pull the best features of the history of sequencers together into a great ubermachine so all these requests seem valid enough to me Richard ----- Original Message ----- From: Steve Maietta To: analogue-sequencer@yahoogro
2006-12-20 by Richard
"P4 will have no playlists. Each part will have a unique pattern for each track, with a maximum pattern length up to however many bars you have space left for in RAM. When you copy one part to another, the copied part will initially contain ghost copies of the patterns from the s
2006-12-20 by Richard
to be fair, part of the P3s stated reason to be has been to pull the best features of the history of sequencers together into a great ubermachine so all these requests seem valid enough to me Richard ----- Original Message ----- From: Steve Maietta To: analogue-sequencer@yahoogro
2006-12-20 by Richard
yes to "eitherway" Colin - thanks for that! this kind of thing is why I bought the P3! I don't wanna make loops, I wanna make organisms and these modes really help that process. Any future modes like this will always be welcome - and used a LOT - by this user. But is it possible
2006-12-20 by Steve Maietta
I wonder if all the maillists for these other sequencers get flooded with requests for changes to make them operate like P3? wow wow wow lots of things to explore in the P3. try it! ~Steve __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mai
2006-12-20 by Colin Fraser
> if you are sending a control change from an aux track is > there any way > to smooth the cc data from a 16 step timebase or do you have to use a > higher resolution timbase and longer pattern length? You'd have to use a higher resolution timebase. Using accumulators to shape th
2006-12-20 by Colin Fraser
> My idea(s): > Working in Pattern Edit mode, with a Playlist longer than 1 pattern > leaves something to be desired (IMO). Yeah, it is a bit awkward... A simple way of moving through different patterns on a track without leaving pattern edit is on my list, but I'm not sure if th
2006-12-20 by Paul Nagle
On Tue, 19 Dec 2006 20:04:05 -0000, "lobit12" wrote: >talking about manual, independent triggering of tracks, great idea. >there's a new device called signal arts m.a.p.s. that does it now too, >but its only 8 step sequencing, you can also control transposition and >other sequenc
2006-12-20 by lobit12
it has a cool feature where you can trigger the sequencer tracks independently so you could stagger them or restart them manually, and even cross modulate them. i think the old zyklus mps could do something like that as well. wonder if the p3 could integrate this type of function
2006-12-19 by James R. Coplin
jeromepacman wrote: > > > Hi Colin, hi users, > > On the aux page, this one for CC assignment. > could you put in the code something that send a midi event to the P3 > midi output while > pressing on "save" button? > > It would be useful to get this for virtual synths assignments
2006-12-19 by jeromepacman
Hi Colin, hi users, On the aux page, this one for CC assignment. could you put in the code something that send a midi event to the P3 midi output while pressing on "save" button? It would be useful to get this for virtual synths assignments (Mostly works with midi learn protocol)
2006-12-19 by Jesse
Just curious if a P1 or P2 ever existed? Or is the P3 the first run of the sequentix brand? -JC [Non-text portions of this message have been removed]
2006-12-19 by lobit12
if you are sending a control change from an aux track is there any way to smooth the cc data from a 16 step timebase or do you have to use a higher resolution timbase and longer pattern length?
2006-12-19 by Colin Fraser
Brett, There is no manual accumulator reset, other than to select a different pattern. It would be easy to add the code for it if there were somewhere it could fit in the UI. Maybe it could be a softkey on play mode page 4... Best regards, Colin Fraser Sequentix Music Systems Ltd
2006-12-19 by Richard
Hi returning to the P3 after I while I forgot how something works... or maybe it just doesn't do what I want very easily I have tracks 1-6 loaded with patterns. I want to copy these patterns to different parts for further editing. This is no problem for changing transposition set
2006-12-19 by Jim Combs
--- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: > > Had a mellow afternoon. Noodled up some nice new sequences today and > these are they. Sorry if a bit long and indulgent. You know how it is.... Sweet! > One P3 plays a Radias and Freebass, the other P3 plays a Prot
2006-12-19 by joshua p negtseb
I second that! This is the only thing I've been left wanting since first playing with the P3! > Colin, > if a shortcut would be introduced a back/forth one would be very cool > to have. > > cheers, > henry > Am 12.04.2006 um 10:51 schrieb Colin f: > > > I've thought about adding
2006-12-19 by joshua p negtseb
First of all, I'm new around here, and I am very happy to be using this fabulous sequencer!!! Not only is the machine amazing, but I really dig the communtiy that surrounds it, and appreciate that Colin has an open ear and mind to what input the users have. That being said... (No
2006-12-18 by bambam4236
I was wondering if anybody could help me with this....i havent heard anything and hope im havent missed something really simple here :( thanks Brett --- In analogue-sequencer@yahoogroups.com, "bambam4236" wrote: > > Hi > > I'm sorry if this is in the manual but i have searched it