Yahoo Groups archive
Messages
Page 57 of 168 · 8362 messages matched
2007-01-31 by josh!
ah, colin answered this much better, and a bit faster than I did :) of course! On 1/30/07, josh wrote: > > --- In analogue-sequencer@yahoogroups.com , > eas wrote: > > > > my idea came from the mpc 2000, where you can shift the timing + and - > > wouldnt it be possible to play no
2007-01-30 by eas
my idea came from the mpc 2000, where you can shift the timing + and - wouldnt it be possible to play notes earlier ?
2007-01-30 by josh
--- In analogue-sequencer@yahoogroups.com, eas wrote: > > my idea came from the mpc 2000, where you can shift the timing + and - > wouldnt it be possible to play notes earlier ? > I think what Collin was saying is that no, this will not be possible. The P3 reads the parameters wr
2007-01-30 by Colin Fraser
> my idea came from the mpc 2000, where you can shift the timing + and - > wouldnt it be possible to play notes earlier ? In something like an MPC, patterns are stored as a MIDI event list, with timestamps on the events. So moving an event forward or backward in time is just a ca
2007-01-30 by Hans Greuber
Hi; Sounds cool! >From: eas >Reply-To: analogue-sequencer@yahoogroups.com >To: analogue-sequencer@yahoogroups.com >Subject: [analogue-sequencer] negative delay >Date: Tue, 30 Jan 2007 02:12:39 +0100 > >i just thought it would be nice to have the delay (shuffle) in negative >value
2007-01-30 by otison
--- In analogue-sequencer@yahoogroups.com, eas wrote: > > i just thought it would be nice to have the delay (shuffle) in negative > values as well. plus one. I'd love to have this one implemented on the p3 one of my favorite things in cubase is the ability to offset tracks by pos
2007-01-30 by Colin Fraser
> i just thought it would be nice to have the delay (shuffle) > in negative > values as well. Negative delay values would require a suitable premonition algorithm. If I had one of those, I'd be writing lottery number calculators, not sequencers. > and maybe the delay value (0-11)
2007-01-30 by eas
i just thought it would be nice to have the delay (shuffle) in negative values as well. and maybe the delay value (0-11) could be displayed in clock divisions, i think this would make p3 more groovy.
2007-01-29 by eas
ahh great, thank you colin Colin Fraser schrieb: > > > > is there a collection of all the changes since the last manual ? > > New features are listed in the revision history text file. > Anything that needs a bit of explanation will usually be described in > a post > to the group
2007-01-29 by Colin Fraser
> is there a collection of all the changes since the last manual ? New features are listed in the revision history text file. Anything that needs a bit of explanation will usually be described in a post to the group, so you could search the archives for messages containing the wo
2007-01-29 by Colin Fraser
> im wondering if the p3 is able to pass sysex messages thru. > looks like its filtered... Sysex thru is not supported. The thru MIDI stream is merged with the output of the sequence engine. Sysex packets have an indeterminate length, which makes merging them tricky unless you ju
2007-01-29 by eas
im wondering if the p3 is able to pass sysex messages thru. looks like its filtered...
2007-01-29 by eas
is there a collection of all the changes since the last manual ? i remember that there was something about copying single notes in pattern edit, can anybody remember this feature ? im using the copy and paste function atm, copying one single step and pasting it a few steps later,
2007-01-29 by josh
> Why not just hit the stop button on the slave device ? > I do it all the time and it's fine. > (I think this had just been addressed) It doesn't work for all DIN machines. I can verify that my 606 will not stop itself if in slave, and would really quite appreciate if Colin did
2007-01-29 by jackson120875
Hi folks, I guess few if any of you will have a fully built P3 to sell (though it's worth asking), but does anyone have a kit, either full or in part, to sell? Cheers, James Jackson
2007-01-28 by Gene Schwartz
> > > > > ³Hi again, Colin, > > As an absolute last resort, if all else fails, I may begrudgingly have > to be content with a software step sequencer until I can get a P3 or > equivalent. Would you happen to know which software sequencer may > come closest to a P3? In Sound On So
2007-01-28 by jackson120875
Hi Guys, Just downloaded P3 Tools to have a look at. Don't have a P3 yet (that might be why the following error occurs), but get this error on running the .exe file (despite installing .NET Framework v1.1): "The application failed to initialise properly (0xc0000135). Click on OK
2007-01-28 by jackson120875
Hi again, Colin, As an absolute last resort, if all else fails, I may begrudgingly have to be content with a software step sequencer until I can get a P3 or equivalent. Would you happen to know which software sequencer may come closest to a P3? In Sound On Sound's review of the P
2007-01-28 by jackson120875
Hi Colin, Firstly, apologies if you pick this up again in your email account (there's 2 messages in your inbox from me)! Just wondering what, if any, Sequentix P3 parts are currently still available and their prices. Also, to the best of your knowledge, how much would it be likel
2007-01-28 by Colin Fraser
> It would be great to add MIDI messages for accumulator reset to zero, > freeze, and unfreeze. As the accumulators are what really > sets the P3 apart > from other sequencers (my 2 cents of what's out there), this > is where you > should add any possible remaining features. Oh a
2007-01-28 by Colin Fraser
> Just to throw in my opinion, I would actually consider the > ability to > transpose tracks individually to be near the top of my list of > priorities for an analog-style-sequencer You can transpose individual tracks, just not from a MIDI keyboard... > So for example I could hav
2007-01-28 by jason/solvent/suction
> > is there anyway to transpose tracks in a part individually using a > midi keyboard? > > Not directly, though it can be done by using one muted track in > record mode to capture notes for transposition into a single step > pattern, then using 'xpose by trk n' events in pattern
2007-01-28 by Richard
ok that got it working thanks colin ----- Original Message ----- From: Colin Fraser To: analogue-sequencer@yahoogroups.com Sent: Sunday, January 28, 2007 4:22 PM Subject: RE: [analogue-sequencer] code ceck error > I can't seem to update my OS anymore. I am trying to > p3fw-3.1.00
2007-01-28 by eas
mabe you can reach this by "note acc defeat" and "set note acc lim" Jack Deckard schrieb: > > In the long line of 'please implement this... Sorry there is no room'. > I'll > add this... > > It would be great to add MIDI messages for accumulator reset to zero, > freeze, and unfree
2007-01-28 by Colin Fraser
> I can't seem to update my OS anymore. I am trying to > p3fw-3.1.007b10. The sysex file is sent from midi-ox and > everything looks fine until the end when I get a code check > error and the option to restart, going back to the current > OS. same with p3fw-3.1.007b9 though p3fw-
2007-01-28 by Richard
Hi Colin I can't seem to update my OS anymore. I am trying to p3fw-3.1.007b10. The sysex file is sent from midi-ox and everything looks fine until the end when I get a code check error and the option to restart, going back to the current OS. same with p3fw-3.1.007b9 though p3fw-3
2007-01-28 by Jack Deckard
In the long line of 'please implement this... Sorry there is no room'. I'll add this... It would be great to add MIDI messages for accumulator reset to zero, freeze, and unfreeze. As the accumulators are what really sets the P3 apart from other sequencers (my 2 cents of what's ou
2007-01-27 by Zahir Manek
is there anyway to transpose tracks in a part individually using a midi keyboard? thanks sequentix wrote: Another re-posted missing message... > reading the p3 manual, i can't find anything about how to set the p3 > to receive midi clock --- i assume it will just sync if midi > c
2007-01-27 by sequentix
--- In analogue-sequencer@yahoogroups.com, Zahir Manek wrote: > > is there anyway to transpose tracks in a part individually using a midi keyboard? Not directly, though it can be done by using one muted track in record mode to capture notes for transposition into a single step pa
2007-01-27 by Paul Nagle
DB wrote: > Well neither my 606 or 808 will stop when in slave mode, unless the > master clock > stops. Don't know if it's issues with both of my devices or just how > they work,but > they've been that way for the 13 years that I've had them :) So that > was my reason for doing i
2007-01-27 by sequentix
--- In analogue-sequencer@yahoogroups.com, DB wrote: > Well neither my 606 or 808 will stop when in slave mode, unless the > master clock > stops. They cant. It's not the CPU that generates the internal clock in a 303/606/808 - there's a separate clock circuit with RUN flip-flop.
2007-01-27 by sequentix
Another re-posted missing message... > reading the p3 manual, i can't find anything about how to set the p3 > to receive midi clock --- i assume it will just sync if midi > clock is > recieved? It's a bit of an omission from the manual, but P3 response to incoming MIDI sync is au
2007-01-27 by sequentix
For some reason my posts to Yahoo dont seem to be getting through. Copying again by web post, no doubt this will show up again... > But I would like to know if you can add a feature that will stop the > Din Sync device as well. So that we can have the ability to > stop the device
2007-01-27 by DB
Hi Paul, See Inline: Paul Nagle wrote: > > Renegade Rhythms Corporation wrote: > > But I would like to know if you can add a feature that will stop the > > Din Sync device as well. So that we can have the ability to > > stop the device, switch modes/program offline, & then use yo
2007-01-26 by acidmitch
> But I would like to know if you can add a feature that will stop the > Din Sync device as well. So that we can have the ability to > stop the device, switch modes/program offline, & then use your > Func + Run feature to restart it in sync on the next bar... > Why not just hit t
2007-01-26 by Colin Fraser
> reading the p3 manual, i can't find anything about how to set the p3 > to receive midi clock --- i assume it will just sync if midi > clock is > recieved? It's a bit of an omission from the manual, but P3 response to incoming MIDI sync is automatic. If it isn't already playing,
2007-01-26 by Colin Fraser
> But I would like to know if you can add a feature that will stop the > Din Sync device as well. So that we can have the ability to > stop the device, switch modes/program offline, & then use your > Func + Run feature to restart it in sync on the next bar... That would have been
2007-01-26 by Paul Nagle
Renegade Rhythms Corporation wrote: > But I would like to know if you can add a feature that will stop the > Din Sync device as well. So that we can have the ability to > stop the device, switch modes/program offline, & then use your > Func + Run feature to restart it in sync on
2007-01-26 by solvent@interlog.com
hi i just got a p3 (loving it so far) and this is my first post Q1: i'm staying somewhere without a lot of my gear with me right now, and i don't have access to anything that outputs midi clock... i'm going to want to sync the p3 to my computer sequencing setup... reading the p3
2007-01-25 by DB
Hi, I sent this earlier but didn't see it go through, so I apologize if it ends up being a double post. I have a Feature Request that I would like to add to the others that I've sent in. I would like the P3 have the ability to Stop the Din Sync device. We already have the Func +
2007-01-25 by Renegade Rhythms Corporation
Hi, I have a feature request that I would like to know if you can put into the P3 among some of the others that I have sent to you already. You have already implemented into the OS, the Func+Run ability to restart Din Sync devices that have been stopped manually. But I would like
2007-01-24 by sad1robot@aol.com
I was skeptical about it at first . . but the roland Vari OS -303 soft synth really shines when used with the P3. its the best soft/303 clone ive heard. There may be something to be said about its hardware dsp/ outputs. Just sounds good. And using the P3 makes 303 programming a p
2007-01-24 by Kev Gallagher
Sorry Zahir, Graham has hit the nail on the head and much quicker than i did! I thought you were looking for other ways to transpose within a part but sure you know how to do those thing i mentioned. I'll read the question again before i answer next time. Exam technique i think i
2007-01-24 by Zahir Manek
thanks! that was driving me crazy. Graham Getty wrote: If you hit func+track, the note knob above part 1 (whose light should now be flashing) will transpose that track only. Func again will give you the option to save the transposition or lose it.Graham _____ From: analogue-seque
2007-01-24 by Kev Gallagher
The basic answer is: Go to playlist edit and there you can transpose each pattern for every track up/down three octaves using the lower (note) knob on playlist step 1-8. However, there are some less obvious ones too, including transpose by event for aux assignments, including pos
2007-01-24 by Zahir Manek
Hello, This is probably a simple question but I haven't been able to figure out how to transpose just one track in a part. I can transpose all the tracks in a part remotely using a keyboard or from the unit itself using the PXPos, but is there a way to either remotely or from the
2007-01-24 by Graham Getty
If you hit func+track, the note knob above part 1 (whose light should now be flashing) will transpose that track only. Func again will give you the option to save the transposition or lose it.Graham _____ From: analogue-sequencer@yahoogroups.com [mailto:analogue-sequencer@yahoogr
2007-01-21 by Paul Nagle
jeromepacman wrote: > Thanks Paul for your help. > > With practice, we can do so much with P3. > It's a jewel indeed. > It is pretty darn wicked. I use accumulators when I want a lot of un/masks to happen on the same pass- such as those times when you want to randomly mask the ga
2007-01-20 by jeromepacman
Thanks Paul for your help. With practice, we can do so much with P3. It's a jewel indeed. --- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: > > jeromepacman wrote: > > > > But with a mask gate, it would be useful to set directly the gate off in pattern 1 and find a > >
2007-01-20 by Steve
> The function of STEP MODE has been re-assigned to the 'arm' function. > The LED status select is now FUNC+STEP MODE. > To 'arm' a track, you hold STEP MODE while pressing the track keys. > The track LED will then flash green, and the track will reset its pattern > (and playlist