Yahoo Groups archive
Messages
Page 90 of 168 · 8362 messages matched
2005-09-20 by Paul Nagle
Colin f wrote: > > > >OK, I've implemented slave re-start in a test build, but it threw up a >couple of questions... >Currently FUNC+RUN while running causes a STOP to be sent on the last beat >of the current Gbar, followed by a START on the first beat of the next Gbar. >I tried
2005-09-19 by jimcombsus
--- In analogue-sequencer@yahoogroups.com, "Colin f" wrote: > Currently FUNC+RUN while running causes a STOP to be sent on the last beat > of the current Gbar, followed by a START on the first beat of the next Gbar. That would essentially automate how we were resyncing the other
2005-09-19 by Colin f
> Is there a way to do a one shot start at Gbar while the P3 is running > without having to stop and start the P3 itself? Is this what the sync > command is for? OK, I've implemented slave re-start in a test build, but it threw up a couple of questions... Currently FUNC+RUN while
2005-09-19 by Colin f
> Is there a way to do a one shot start at Gbar while the P3 is running > without having to stop and start the P3 itself? Is this what the sync > command is for? Hmm... you weren't discussing this on the flight with Paul ? Re-sync of MIDI and DIN outputs is something we've spoken
2005-09-19 by Paul Nagle
jimcombsus wrote: >Thanks again Paul! And thanks again Colin for a great product! > > Any time - it was a total pleasure from start to finish and I really enjoyed our chat coming back to Atlanta. Must do it again! Paul -- --- Paul Nagle / Soft Room Music / Bogus Focus Records / B
2005-09-19 by jimcombsus
We used my P3 as a master MIDI clock for about 5 or 6 of the rigs on a couple of tunes at Different Skies. There were several times when one of the rigs would not be ready to receive clock and I'd have to stop and start to generate a start message. Is there a way to do a one shot
2005-09-19 by jimcombsus
Hello all! Just back from Different Skies and just wanted to publicly thank Paul Nagle for his patient sharing of knowledge around the P3 over the past week. Paul gave an hour seminar to the other 3 P3 owners at the event plus a couple other interested parties. You can see at pho
2005-09-17 by Colin f
> is there a PDF guide for the demo tracks? I can't find a link > anywhere... The file is P3Demo1.pdf, in Yahoo files section. To leave an empty first bank on production P3s, the contents of bank 1 were moved to bank 2. Otherwise, P3 ships with the P3Demo1 patterns as described.
2005-09-17 by Richard Scott
is there a PDF guide for the demo tracks? I can't find a link anywhere... Richard [Non-text portions of this message have been removed]
2005-09-15 by amwgroups2003
--- In analogue-sequencer@yahoogroups.com, "Colin f" wrote: > > It feels a little counter-intuitive to me because my mind kinda sees > > the "sync" button as a shortcut to restart the pattern with the new > > settings. Is that the way it was planned? > Yeah, it makes sense that i
2005-09-15 by Robert van der Kamp
On Thursday 15 September 2005 08:15, Boele Gerkes wrote: > You're right Robert. Didn't trie that. Ah, okay. :) > > But still it would be nice to get it started and synced > with the Start button too. Yes, sure! That was good thinking, Colin! - Robert
2005-09-15 by Boele Gerkes
You're right Robert. Didn't trie that. But still it would be nice to get it started and synced with the Start button too. Boele Op 15-sep-2005, om 8:13 heeft Robert van der Kamp het volgende geschreven: > On Thursday 15 September 2005 07:54, Boele Gerkes wrote: > >> WOW! You're p
2005-09-15 by Robert van der Kamp
On Thursday 15 September 2005 07:54, Boele Gerkes wrote: > WOW! You're pretty smart huh??? > > Just checked and you are right (of course). > > I would have *never* thought of that :-))) > > But it would be nice indeed to have it starting always on > CONTINUE messages. Boele, on t
2005-09-15 by Boele Gerkes
WOW! You're pretty smart huh??? Just checked and you are right (of course). I would have *never* thought of that :-))) But it would be nice indeed to have it starting always on CONTINUE messages. Thanks Colin, Boele Op 14-sep-2005, om 23:22 heeft Colin f het volgende geschreven:
2005-09-14 by Colin f
> > Sounds to me like it's receiving the start / stop but NOT > MIDI clock. > > Could you replace the P3 with something else on that MIDI port and > > determine whether MIDI clock is reaching there? > > Yes, attaching the same cable that comes out of the MPC > directly into > the
2005-09-14 by jimcombsus
A 20 minute short Quicktime video of the people and equipment of Different Skies 2005 shot and edited by Giles Reaves is available at the following link: http://www.differentskies.com/video/ds-2005_gear.mov The video will stream but a high bandwidth connection is highly recommend
2005-09-14 by Boele Gerkes
>> Adjusting tempo on the P3 adjusts the speed indeed. >> >> Also, connecting a midicable from the output of the MPC directly into >> the P3 gives the same result. Start/stop works, but tempochanges do >> not... :-((( >> > Sounds to me like it's receiving the start / stop but NOT
2005-09-14 by Paul Nagle
Boele Gerkes wrote: > >Adjusting tempo on the P3 adjusts the speed indeed. > >Also, connecting a midicable from the output of the MPC directly into >the P3 gives the same result. Start/stop works, but tempochanges do >not... :-((( > > Sounds to me like it's receiving the start /
2005-09-14 by Boele Gerkes
BTW, a memory init didn't do anything. And I am on 3.1.005 Boele Op 14-sep-2005, om 21:40 heeft Boele Gerkes het volgende geschreven: >> That is weird... >> If the P3 is started from MIDI, it immediately sets itself to >> respond to >> incoming clock. >> There's no way it can get
2005-09-14 by Boele Gerkes
> That is weird... > If the P3 is started from MIDI, it immediately sets itself to > respond to > incoming clock. > There's no way it can get from receiving a start message to running > without > passing the code that configures external timebase. > Are you sure there isn't some
2005-09-14 by Colin f
> I've changed the studio en rebuilded all audio and midi paths and > cables and now I have again a weird problem with syncing the P3 to > midiclock. > > This time it is attached directly to the AMT8, where a MPC4000 feeds > it with midiclock (on all 8 channels). > > Hitting star
2005-09-14 by Boele Gerkes
I've changed the studio en rebuilded all audio and midi paths and cables and now I have again a weird problem with syncing the P3 to midiclock. This time it is attached directly to the AMT8, where a MPC4000 feeds it with midiclock (on all 8 channels). Hitting start on the MPC wil
2005-09-14 by jitterbugbite2003
Oops, i just realised that on the colinfraser.com pages there is an 808-909-clone mentioned. I didn't know... --- In analogue-sequencer@yahoogroups.com, "jitterbugbite2003" wrote: > Hi Colin, > > just a quick question, nothing to do with the P3. > I assume you'll be working on ot
2005-09-14 by Colin f
> I noticed one tiny thing that might make it a bit easier to work > with - when you change the "tbase" of a pattern and then hit "sync", > rather than adjusting to the new tbase and continuing, it appears to > sync on the old tbase for as long as you keep hitting the button. Yep
2005-09-14 by jitterbugbite2003
Hi Colin, just a quick question, nothing to do with the P3. I assume you'll be working on other ideas in the future. Arent't you interested in a kind of Novation Drumstation/Vermona DRM1 MkII type of instrument, or another percussion synth, to complement the P3 ? I can hardly fin
2005-09-14 by Gary Chang
"Colin f" wrote: > > But do you use the notes relative to C to edit the scale, or relative to the > current FTS root ? using notes relative to c would work. > And if you use the current root, would you lose track of what you had done > when you changed the root ? not if, when one
2005-09-14 by amwgroups2003
Hi Colin and everyone. Been ages since i've posted here, much less played with my P3, but i finally finished uni so i've been getting into it again. Hopefully i'll actually start getting productive soon (probably too much to ask ;-) I noticed one tiny thing that might make it a b
2005-09-14 by Gary Chang
colin, I agree with your conclusions about FTS - that 2 octaves would work - one to toggle the pitches and the other to set the base pitch.... so, with 2 octaves for FTS and 4 octaves for transpose, that still leaves 2 octaves (24 keys) left to feature asignments.... gary
2005-09-13 by Colin f
> I am presently using an M-Audio Oxygen midi controller to control the > P3. It has two octaves of keys, and 8 knobs for cc's. I also have > two Roland portable 4 octave midi keyboards that are usb powered. I am presently without *any* MIDI controller keyboard, other than my Gro
2005-09-13 by Gary Chang
Steve Maietta wrote: > > I agree, that it sounds nice to be able to atack the thing like an organ and have it change what its doing on the fly, but you then have to memorize what keys do what depending on what menu you're in. . I like the concept but it seems like it would take f
2005-09-13 by Andrew Scheidler
An SVGA output and a touchscreen :) Andrew >>> srmaietta@yahoo.com 09/13/05 9:42 AM >>> Im all for live playability. . . whats the best way? knob/fader box? Dedicated button bank? (ucapps.de)
2005-09-13 by Steve Maietta
I agree, that it sounds nice to be able to atack the thing like an organ and have it change what its doing on the fly, but you then have to memorize what keys do what depending on what menu you're in. . I like the concept but it seems like it would take forever to get to the poin
2005-09-13 by Gary Chang
--- In analogue-sequencer@yahoogroups.com, ch.³l wrote: . > > for calling up the random feature, and a lot of others too of course, > the only thing you'd really need is external control of the "Mask > Aux[x], Kn>n" events, where the Kn is replaced by a cc. > Personally I think i
2005-09-13 by Gary Chang
Colin, I am presently using an M-Audio Oxygen midi controller to control the P3. It has two octaves of keys, and 8 knobs for cc's. I also have two Roland portable 4 octave midi keyboards that are usb powered. Even with the physical limits of 2 and 4 octaves, all three of the keyb
2005-09-13 by jimcombsus
3 P3s here; John Duval, Jeff Kunzelman, Jim Combs. Plus Paul Nagle. We're in heaven. -Jim http://www.differentskies.com/dailyphotolog.html
2005-09-12 by Colin f
> for calling up the random feature, and a lot of others too of course, > the only thing you'd really need is external control of the "Mask > Aux[x], Kn>n" events, where the Kn is replaced by a cc. Nice idea, and easy to do. Where's my notepad... Best regards, Colin Fraser Sequen
2005-09-12 by Paul Nagle
Colin f wrote: > > >I haven't ruled out implementing some more things with keyboard control >rather than controllers. >CCs have the advantage of being able to select from a range of values, >whereas unless you have very precise control of your keyboard playing, >velocity has to b
2005-09-12 by ch.³l
> > It would be great if one could program a few midi notes to > > specifically call up the random features and the record features. > > (Like the lowest note on the keyboard being the trigger to inject a > > random note). > > The difficulty with allowing all sorts of assignable
2005-09-12 by Colin f
> Although Paul's implimentation of one P3 controlling the other is > intriguing, I still envision my P3 being programmed from a midi master > keyboard. > In lieu of having ALL the cc's mapped to the keyboard, I would love if > the P3 had a midi note-actuated preset scheme (how a
2005-09-12 by Nick Rothwell
> CCs have the advantage of being able to select from a range of values, > whereas unless you have very precise control of your keyboard playing, > velocity has to be pretty much ignored. Many keyboards don't put out the full range of velocity values in any case. > So keys can on
2005-09-11 by Colin f
> 1. How does FTS choose which note it will play? e.g if using Aeolian > and note stored is E for FTS play Eb of F ? It depends what the root note of your Aeolian is. Assuming C Aeolian, E will become Eb. When a note is not in the scale, FTS looks to see if the note 1 semitone be
2005-09-11 by makedosh
Colin, 1. How does FTS choose which note it will play? e.g if using Aeolian and note stored is E for FTS play Eb of F ? 2. Whilst using 'aux note rel' to set a chords sequence I had an idea although I'm not sure it is possible to implement; To keep a sequence interesting we could
2005-09-10 by Paul Nagle
Colin f wrote: >Once that lot is done, I don't have any more ideas down. Maybe Mr Nagle does >;-) > > Maybe indeed! Actually my list is dwindling: some more aux events (mostly of a "conditional" nature) and the suddenly-very-desirable "send new MIDI start even whilst running" com
2005-09-10 by Richard Scott
Hi Colin I've satisfied myself that nothing else is causing the midi CC# discrepency - with all other units switched out or unplugged the IBK knobs send out incorrect data and are slower than usual when the P3 is attached as a thru. Will try with the latest beta when i get a chan
2005-09-10 by Boele Gerkes
Hi Colin, Hopefully you did not misunderstood me. I will be the *last* (after Paul of course... :-)) to say you must stop developing the software! Since the day I bought this magical thing, I think the possibilities have about doubled in dozens of updates, which is nice! I was ju
2005-09-10 by Colin f
> I just recorded my first P3 piece, sound like Autechre eating > Rice Krispies :) that'll do me man Well I hope you're going to post a snippet somewhere ;-) Aside from one hugely disappointing recent live appearance, I'm still a big autechre fan... Best regards, Colin Fraser Seq
2005-09-10 by Colin f
> Just wondering, did you plan to stop one day to add to/change the P3 > software? > Maybe I get stoned for this question (hi Paul), but someone I am > longing for a finished version (except bugfixes of course :-)) Nothing wrong with getting stoned... It's funny, I've heard some
2005-09-10 by Colin f
> I'm using the P3 partly as a midi thru box between an > IBKcontrol 10 midi controller, which is controlling an > Eventide Eclipse via midi channel 1. With the P3 not running > but set to midi thru F1 sometimes the CC#s from the ibk are > not properly recognised by the Eclipse.
2005-09-10 by Gary Chang
Colin, I think that what you have created is tremendous. I love the features that you have created for this guy - it has so many places for real time interactions. Although Paul's implimentation of one P3 controlling the other is intriguing, I still envision my P3 being programme
2005-09-10 by Boele Gerkes
Heya Colin, Just wondering, did you plan to stop one day to add to/change the P3 software? Maybe I get stoned for this question (hi Paul), but someone I am longing for a finished version (except bugfixes of course :-)) Regards, Boele