Yahoo Groups archive
Messages
Page 91 of 168 · 8362 messages matched
2005-09-10 by Richard Scott
Hi Colin, it occurs to me something else could be pumping the same CC#s thru the P3 on a different channel and causing the problemard. Will experiment and tell you for sure before trying the new beta Richard ----- Original Message ----- From: Richard Scott To: analogue-sequencer@
2005-09-10 by Richard Scott
Hi Colin I'm still on 3.1.005 but will attempt the beta, its a mysterious issue but tangibly a problem - tried new leads, intialised bank, different outputs, rebooting etc. but for some reason the P3 is not passing the data thru intact. I'll try the beta version tommorrow... I ju
2005-09-10 by Richard Scott
Hi I'm using the P3 partly as a midi thru box between an IBKcontrol 10 midi controller, which is controlling an Eventide Eclipse via midi channel 1. With the P3 not running but set to midi thru F1 sometimes the CC#s from the ibk are not properly recognised by the Eclipse. If I ta
2005-09-10 by jimcombsus
--- In analogue-sequencer@yahoogroups.com, "jimcombsus" wrote: > I'm trying to backup my P3 data into SysEx and am having a problem > getting the program to capture the data. I solved the issue by disconnecting the P3 from all midi devices, recabling from channel 7 to channel 8 o
2005-09-10 by Colin f
> i think the first thing you need to do is set up those patterns you > want on tracks 7 & 8 instead of 1 & 2, and then use tracks 1 - 6 to > control them. this is because the P3 works through the tracks in > series, going from 1 to 8, so anything you'd want to manipulate by > us
2005-09-10 by jimcombsus
I'm trying to backup my P3 data into SysEx and am having a problem getting the program to capture the data. Capturing the P3 dump worked for me last weekend and I used the SysEx program to update my firmware last night, so connections and transmissions seem to be ok. Any helpful
2005-09-10 by jimcombsus
--- In analogue-sequencer@yahoogroups.com, "Colin f" wrote: > > > i think the first thing you need to do is set up those patterns you > > want on tracks 7 & 8 instead of 1 & 2, and then use tracks 1 - 6 to > > control them. this is because the P3 works through the tracks in > > s
2005-09-10 by ch.³l
--- In analogue-sequencer@yahoogroups.com, "richardscott" wrote: > Yo ho > > Can anyone help me with this? I want to have patterns on > tracks 1 and 2 and then use tracks 3-8 to randomise, disrupt > and generally mess up these patterns live, preferably just > by flipping on and o
2005-09-10 by richardscott
Yo ho Can anyone help me with this? I want to have patterns on tracks 1 and 2 and then use tracks 3-8 to randomise, disrupt and generally mess up these patterns live, preferably just by flipping on and off the tracks rather than having to dig into the menu too much onstage. I gue
2005-09-09 by jimcombsus
I successfully installed the new firmware and am now ready for the P3 summit at Different Skies. Just a bit of feedback is that I stumbled around for a few minutes until I realized I was on the regular SysEx Receive function rather than the flash SysEx Receive function (by bootin
2005-09-09 by Colin f
> I'm cutting a long story short here- you don't want to know how > windows insists on the drivers being reinstalled everytime you move a > usb device from one socket to another. I know it shouldn't. > > anyway, #1003 is now a doorstop. > when I switch it on, all 8 mode led's com
2005-09-09 by Boele Gerkes
Op 8-sep-2005, om 11:49 heeft Paul Nagle het volgende geschreven: > http://bogusfocus.deepbass.co.uk/jic/mp3/oldweird/ > JIC_MagicWeedPart1_FreeTrack.mp3 > > :) HAHAHAHAHAHA!!!!!! ROTFLMAO :-)))))))))) Oh man, you're too funny Paul!!! :-) Boele Too bad you did not integrate the P
2005-09-09 by ferrograph632
>>I realize that this is entirely pilot error here - I put the P3 into SysEx Firmware Upgrade mode (holding FUNC and PAGE; then F3) and then sent it the midi 1.006 file via a midi sequencer. Bonk....
2005-09-09 by Boele Gerkes
Op 8-sep-2005, om 22:51 heeft Colin f het volgende geschreven: > Gary, > > I've used a Mac utility to upgrade a P3 too, but I can't remember the > details. Sysex Librarian for instance. Boele
2005-09-08 by Mark Pulver
Colin f (01:51 PM 9/8/2005) wrote: >I've used a Mac utility to upgrade a P3 too, but I can't remember the >details. SysEx! http://members.cox.net/sgrace9/sysex/ And, for OS X: http://www.snoize.com/SysExLibrarian/ Mark
2005-09-08 by Paul Nagle
DJ Paris Lee wrote: >Now things are getting interesting! > >Getting into the whole MIDI CC assignments thing...wicked! > >Question 1: > >So I understand you get 4 CC's per track...does this mean if I want >to have control a large >number of parameters on just one synth...I could
2005-09-08 by Colin f
> So I understand you get 4 CC's per track...does this mean if I want > to have control a large > number of parameters on just one synth...I could send all 8 sequencer > tracks to the same > synth..therefore controlling 32 MIDI cc's? You could, though if you send 32 CC messages o
2005-09-08 by Gary Chang
Colin and Mark, Thanks for you notes - a moment to reconfig my Media Player to output through the right outputs and the P3 is updated...! I will examine the Mac OSX links for the future. Now that I have restored my P3 (and my confidence), I will have more courage to experiment wi
2005-09-08 by Colin f
Gary, > I realize that this is entirely pilot error here - I put the P3 into > SysEx Firmware Upgrade mode (holding FUNC and PAGE; then F3) and then > sent it the midi 1.006 file via a midi sequencer. Bonk.... The problem is probably a lack of sufficient delay between blocks. The
2005-09-08 by Paul Nagle
I was asking Colin about this earlier and he suggested I put it to the list. Each time I use the accumulators I have to change the config to something that I find more useful. I tend to set the limits for notes to 24, the limit for velocities to 127 and the limit for the D accumu
2005-09-08 by DJ Paris Lee
Now things are getting interesting! Getting into the whole MIDI CC assignments thing...wicked! Question 1: So I understand you get 4 CC's per track...does this mean if I want to have control a large number of parameters on just one synth...I could send all 8 sequencer tracks to t
2005-09-08 by Gary Chang
Funny how a little bit of knowlege can really mess things up - I just came back from out of town and tried to update my P3 to 1.006. I managed to corupt the firmware so that it will not boot any longer. I realize that this is entirely pilot error here - I put the P3 into SysEx Fi
2005-09-08 by Paul Nagle
On Thu, 8 Sep 2005 11:30:30 +0200, Boele Gerkes wrote: >Now I see. > >Isn't Steven Hawkin the guy that has some very strange ideas about >our universe? :-) > >Well, Paul does too on fridayevenings I guess... Stephen and I got together over a bong a few weeks later in our favourit
2005-09-08 by Boele Gerkes
Now I see. Isn't Steven Hawkin the guy that has some very strange ideas about our universe? :-) Well, Paul does too on fridayevenings I guess... Boele Op 8-sep-2005, om 11:23 heeft Andy Wilson het volgende geschreven: > On 8 Sep 2005 at 10:34, Boele Gerkes wrote: > >>> You had to
2005-09-08 by Andy Wilson
On 8 Sep 2005 at 10:34, Boele Gerkes wrote: > > You had to be there...a surreal moment > > Why? Because here I was sitting at a table with Colin Fraser, Paul Nagle, Tony Allgood, Mark Smith, and (very indirectly) Steven Hawkin. All Giants among men (ok I may be a little taller th
2005-09-08 by Boele Gerkes
LOL! Op 8-sep-2005, om 10:37 heeft Oakley Sound het volgende geschreven: >>> You had to be there...a surreal moment >>> >> Why? >> > > Well, the food was nice. > > Tony > > > ------------------------ Yahoo! Groups Sponsor -------------------- > ~--> > Life without art & music? Ke
2005-09-08 by Oakley Sound
>> You had to be there...a surreal moment >Why? Well, the food was nice. Tony
2005-09-08 by Boele Gerkes
> On 8 Sep 2005 at 1:36, Gary Chang wrote: > > Genius rubs off when you sit down in a curry house with Steven Hawkin > at the next table :->) > > You had to be there...a surreal moment Why? Boele
2005-09-08 by Andy Wilson
On 8 Sep 2005 at 1:36, Gary Chang wrote: > IMHO, I believe that the genius of Colin's P3 is that he didn't pen > himself in with insufficient processing and ram. Genius rubs off when you sit down in a curry house with Steven Hawkin at the next table :->) You had to be there...a s
2005-09-08 by Peter Lunnon
--- In analogue-sequencer@yahoogroups.com, "Andy Wilson" wrote: > > Because here I was sitting at a table with Colin Fraser, Paul Nagle, > Tony Allgood, Mark Smith, and (very indirectly) Steven Hawkin. All these electronic whizzes in one place - sounds like he was lucky not to ge
2005-09-07 by Gary Chang
IMHO, I believe that the genius of Colin's P3 is that he didn't pen himself in with insufficient processing and ram. The very idea that he can consider our requests is "new." Most products that are this mature (reliable) are usually superceded in order to pack newer features into
2005-09-07 by philsmillie
> I believe that one can do this already in one of the DIY ones > without having to wait for the P4 :) Dave, you're totally right mate... Plus, I should've thought of that when I built #32.. Doh! Well, I suppose I've no excuse not to include the grinder and roller when I build th
2005-09-07 by David Bate
philsmillie wrote: >I can't think of anything else it needs (but I know a man who can ;-) ) >apart from the built in herb grinder and spliff roller. >Is this on the 'to do' list or will I have to wait for the P4? > > I believe that one can do this already in one of the DIY ones w
2005-09-07 by ferrograph632
wrote: > Well, what can I say Colin? > If you were female and single I'd want to marry you! > The remote control has (for me) made the best sequencer better, > nothing touches it now. > As a midi guitarist the P3 is worth the money just as a remotely > controllable midi router! >
2005-09-07 by philsmillie
Well, what can I say Colin? If you were female and single I'd want to marry you! The remote control has (for me) made the best sequencer better, nothing touches it now. As a midi guitarist the P3 is worth the money just as a remotely controllable midi router! I can't think of any
2005-09-07 by makedosh
Great! Thank you. Roger --- In analogue-sequencer@yahoogroups.com, ch.³l wrote: > --- In analogue-sequencer@yahoogroups.com, "makedosh" > wrote: > > > > After setting an aux to CC10, how do I randomize the values rather > > than having to set the individual knobs to fixed pan pos
2005-09-07 by ch.³l
--- In analogue-sequencer@yahoogroups.com, "makedosh" wrote: > > After setting an aux to CC10, how do I randomize the values rather > than having to set the individual knobs to fixed pan postions? > > Roger set an AUX above the one you've set to CC10 to event "Rndmz aux[x]". say
2005-09-07 by makedosh
After setting an aux to CC10, how do I randomize the values rather than having to set the individual knobs to fixed pan postions? Roger
2005-09-06 by Paul Nagle
On Tue, 6 Sep 2005 00:00:32 +0200, "ERiC" wrote: >Hi Paul & Colin, >Thanks for the quick reply I got! I'm still learning the P3. It's a very >nice box and it seems to do what i expected. I'll probably have more >questions in the future when I've got time to go deeper.. Ask away -
2005-09-05 by ERiC
Hi Paul & Colin, Thanks for the quick reply I got! I'm still learning the P3. It's a very nice box and it seems to do what i expected. I'll probably have more questions in the future when I've got time to go deeper.. Cheers, Eric ----- Original Message ----- From: "Colin f" To: S
2005-09-05 by em_dkj
> >I remembered Jeff Kunzelman has a P3 now too. I can see a P3 showcase > >piece in the making! 4 P3s sync'd together, what an awesome idea. > > > > > I'm in! > > Paul If you guys pull this off, you just HAVE to record it and post the results Here's hoping! Dave
2005-09-05 by Colin f
> So I'm finally digging deeper into the P3 and starting to get > more into sculpting and > randomizing... > > Question: is there a way to sculpt/randomize without having > to hold down F1-3 at the > same time...that would give me a free hand to play a keyboard Sculpt and randomi
2005-09-05 by Paul Nagle
jimcombsus wrote: > Sounds like a plan. > >I remembered Jeff Kunzelman has a P3 now too. I can see a P3 showcase >piece in the making! 4 P3s sync'd together, what an awesome idea. > > I'm in! Paul --- Paul Nagle / Soft Room Music / Bogus Focus Records / Binar / Headshock / The Jo
2005-09-05 by Paul Nagle
jimcombsus wrote: >Yes, my P3 will be in visible evidence at Different Skies this year >(7 days away!). > >I've posted pictures of my rig at: > >http://www.touchxtone.com/ds2005_prep.html > > That's a gorgeous, neat setup - scarily similar to my own. >I think Doug Wellington is b
2005-09-05 by jimcombsus
--- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: > That's a gorgeous, neat setup - scarily similar to my own. I learned from the master;^) > Maybe I should bring mine after all - starting to feel left out > Will see if Mike still has that power supply. Oh, my heart be
2005-09-05 by DJ Paris Lee
So I'm finally digging deeper into the P3 and starting to get more into sculpting and randomizing... Question: is there a way to sculpt/randomize without having to hold down F1-3 at the same time...that would give me a free hand to play a keyboard -Paris Lee
2005-09-05 by bleep
On Sun, 4 Sep 2005, richardscott wrote: > problem only happens when I am arp recording with the micron > in its mix mode, its single program mode is fine. When I > press a note on the micron keyboard in mix mode it is > sending the note out on the first 8 midi channels at once so
2005-09-05 by jimcombsus
Yes, my P3 will be in visible evidence at Different Skies this year (7 days away!). I've posted pictures of my rig at: http://www.touchxtone.com/ds2005_prep.html The little rack I built for the P3 fits into a Pelican 1620 case along with the Nova. The rest of the gear along with
2005-09-05 by Paul Nagle
On Mon, 05 Sep 2005 02:16:07 +0000, darkstr1746@comcast.net wrote: >Hi Paul : ) >well, i wasn't even going to bring it. But if you can pound some of the more subtle nuances into my thick skull, i'll reconsider. My build is 3.98 I think Jim's bringing his and maybe others too. We
2005-09-05 by Gene Schwartz
subtopic: love of hardware step sequencers. Confession: I have cheated on the p3. I have also purchased a Shrittmacher. Comment: I love them both. The p3 is way more powerful. The Shrittmacher interface makes it way easier to do certain things. Goal is to try to use them together