Yahoo Groups archive
Messages
Page 95 of 168 · 8362 messages matched
2005-08-10 by Colin f
> The only way to reach the goal we're attempting to reach via these LED > ringed encoders is to incorporate some sort of plasma display > around the > encoder itself. (I have seen this done in a mixer somewhere... I can't > remember where though.) That display can show the range
2005-08-10 by bleep
I know this is the P3 group, but I suspect a number of us have Evolvers. And in case you didn't know, V3 of the Evolver OS was announced yesterday. The main upgrade for non-polyevolver users is that a large number of parameters have had CC#s assigned to them. Previously, the only
2005-08-10 by bleep
On Wed, 10 Aug 2005, Sascha Matzke wrote: > While we're in this "a free wish everyone" mood ;-). I think it would > be great if the P3 had endless encoders with LED rings - but that > would be another "feature" to push the price up. I think we've talked about that before on the l
2005-08-10 by Sascha Matzke
Hi, On 8/10/05, analog1k wrote: > I would prefer to see another 2 rows of 16 knobs for > 3x16 or 1x48 note sequences per pattern/track, but hey > that would push the price up on the P3. While we're in this "a free wish everyone" mood ;-). I think it would be great if the P3 had e
2005-08-10 by djparislee
After further review...the problem might have to do with switching banks on the P3 I just tried it with Bank 1...everything was fine... I switched it to bank 3...virus goes silent again
2005-08-10 by djparislee
I would agree in one sense that the large keyboard seems a bit overkill with a polyphony of only 4...I think the main reason for such a large keyboard was so the Poly could have enough real estate for the knobs... I give him an A+ for the knob layout...while some of my other synt
2005-08-10 by djparislee
Before I start, I know the problem is clearly coming from the Virus and not the P3... I'm just trying to figure out what type of problem it might be... I turn the Virus on, select a patch...but as soon as I press run on the P3 the virus goes silent. I have to turn it off and back
2005-08-10 by Nick Rothwell
> My bigger gripe with encoders is their inherent lack of resolution. > Anything more than 24 or 36 steps per rotation costs a lot of moolah, making > an acceleration algorithm fairly essential. Some bits of hardware I've used have inc/dec buttons which operate on the last-edited
2005-08-10 by analog1k
--- In analogue-sequencer@yahoogroups.com, Sascha Matzke wrote: > Hi, > > While we're in this "a free wish everyone" mood ;-). I think it would > be great if the P3 had endless encoders with LED rings - but that > would be another "feature" to push the price up. > > Sascha If you
2005-08-10 by djparislee
i'm lucky enough to actually have a Poly Evolver Keyboard!!! highly highly recommended... --- In analogue-sequencer@yahoogroups.com, bleep wrote: > > I know this is the P3 group, but I suspect a number of us have Evolvers. > And in case you didn't know, V3 of the Evolver OS was a
2005-08-10 by Robert van der Kamp
On Wednesday 10 August 2005 12:49, Richard Scott wrote: > > If this were avaiable as a retro-fit, how many people > > would be interested ? > but could it also be possible to send a track to multiple > channels on different midi outputs? hmmm, getting ahead > of myslef here !! :)
2005-08-10 by analog1k
I would prefer to see another 2 rows of 16 knobs for 3x16 or 1x48 note sequences per pattern/track, but hey that would push the price up on the P3. Ah well! it's was just a thought, but a nice one, maybe I was just dreamin' the whole damn thing. :-) Analog1k. --- In analogue-sequ
2005-08-10 by Richard Scott
> If this were avaiable as a retro-fit, how many people > would be interested ? well I haven't got my P3 yet either but if that means I could address 4 multitimbral modules (say a wavestation, an andromeda, a nord G2 and an Akai Mpc4000) separately just using the P3 to select wha
2005-08-10 by Robert van der Kamp
On Tuesday 09 August 2005 23:34, Colin f wrote: > I know how I would do this in theory, but I haven't made > any start on implementing it. > If this were avaiable as a retro-fit, how many people > would be interested ? I sure would be, depending on the price of course. Do we get
2005-08-09 by Sascha Matzke
Hi, On 8/9/05, Colin f wrote: > I know how I would do this in theory, but I haven't made any start on > implementing it. > If this were avaiable as a retro-fit, how many people would be interested ? I don't have a P3 (yet ;-)) but I would definitely be interested in such extensio
2005-08-09 by Colin f
> The new site looks awesome, Colin! Very professional :-) > > Gert > Yep! same here, I quite agree, very pro-looking > and doin' the biz. Well done Colin. :-) > Very, very nice looking site, Colin. > Congrats! > > - Robert I can't take much credit for anything other than receivi
2005-08-09 by Colin f
> Looking at those nice production P3 pics, I remember again > that the production P3 has 4 MIDI outs on the back, while > the DIY version I'm playing now (Boele's) only has one. > > Does the OS already support those 4 outs? That would be very > nice! The four outs on the product
2005-08-09 by Robert van der Kamp
Looking at those nice production P3 pics, I remember again that the production P3 has 4 MIDI outs on the back, while the DIY version I'm playing now (Boele's) only has one. Does the OS already support those 4 outs? That would be very nice! - Robert
2005-08-09 by colinfraser_com
Last night's beta wasn't filtering record channels correctly. This is fixed in v3.1.006b2 Sorry if this confused any of you who thought it was working fine, and couldn't understand how they broke it today. You know who you are ;-) Cheers, Colin f
2005-08-09 by Robert van der Kamp
On Tuesday 09 August 2005 12:12, colinfraser_com wrote: > Folks, > > A couple of bits of news... > > The Sequentix website has undergone a total re-design, > courtesy of P3 owning web design guru Pete Lunnon. > > http://www.sequentix.com Very, very nice looking site, Colin. Congr
2005-08-09 by Gert van Santen
colinfraser_com wrote: > Folks, > > A couple of bits of news... > > The Sequentix website has undergone a total re-design, courtesy of > P3 owning web design guru Pete Lunnon. > > http://www.sequentix.com The new site looks awesome, Colin! Very professional :-) Gert www.waveworld
2005-08-09 by analog1k
Yep! same here, I quite agree, very pro-looking and doin' the biz. Well done Colin. :-) Cheers. --- In analogue-sequencer@yahoogroups.com, "Gert van Santen" wrote: > colinfraser_com wrote: > > Folks, > > > > A couple of bits of news... > > > > The Sequentix website has undergone
2005-08-09 by colinfraser_com
Folks, A couple of bits of news... The Sequentix website has undergone a total re-design, courtesy of P3 owning web design guru Pete Lunnon. http://www.sequentix.com I'm going to add a links page to P3 owners websites, so if you'd like to be included, let me know your URL. If you
2005-08-07 by philsmillie
> > I'm of course loving it...just having one small issue with > > the P3 syncing to incoming midi > > clock from Logic 7... I've solved all my Logic (and other software) "sync" problems simply by not switching my computer on. This probably won't help you in the short term but ma
2005-08-06 by Colin f
> I'm of course loving it...just having one small issue with > the P3 syncing to incoming midi > clock from Logic 7... > > sometimes the P3 seems to lag off the clock...when it does i > stop the sequencer and reset > the loop...but the P3 keeps playing from whatever step it stops
2005-08-06 by Robert van der Kamp
On Saturday 06 August 2005 07:22, djparislee wrote: > After lusting after one of these things for months...I > finally procured one from Analog Haven! > > I'm of course loving it...just having one small issue > with the P3 syncing to incoming midi clock from Logic > 7... > > some
2005-08-06 by djparislee
After lusting after one of these things for months...I finally procured one from Analog Haven! I'm of course loving it...just having one small issue with the P3 syncing to incoming midi clock from Logic 7... sometimes the P3 seems to lag off the clock...when it does i stop the se
2005-08-05 by Colin f
> so- while the machine is "in record", the notes that come in on the > appropriate channel are sent to the track that's being edited, while > notes & controllers on other channels go whistling straight through, > being FTS'd on the way. At the moment, when you enter record, inco
2005-08-05 by ferrograph632
>>Some people want to be able to define a single channel for their master keyboard, and have other midi streams pass through as normal in record mode, possibly being FTS'ed on the way. This will appear in the next release. >>a user wanting to send p/b & m/w data to the attached n
2005-08-04 by Andrew Scheidler
Well, that answers my "sticky" question... >>> colin@colinfraser.com 08/04/05 8:44 AM >>> That would be a giveaway. This way, hot chicks/dudes (delete as applicable) will approach you to ask what a 'sequencer' is, thus breaking the ice, and greatly improving your sex life.
2005-08-04 by Andrew Scheidler
Does this have the "sticky" option? :P >>> colin@colinfraser.com 08/04/05 5:50 AM >>> Folks, A high-quality Fruit of the Loom T-shirt, in L or XL sizes, is now available featuring the P3 logotype: http://www.sequentix.com/p3t.jpg The shirts are navy blue, with matt silver text.
2005-08-04 by Colin f
> I thought it would have nice picture of the P3 > on it, even if it were just LCD screen. ;) That would be a giveaway. This way, hot chicks/dudes (delete as applicable) will approach you to ask what a 'sequencer' is, thus breaking the ice, and greatly improving your sex life. Be
2005-08-04 by analog1k
I thought it would have nice picture of the P3 on it, even if it were just LCD screen. ;) --- In analogue-sequencer@yahoogroups.com, Nick Rothwell wrote: > > A high-quality Fruit of the Loom T-shirt, in L or XL sizes, is now > > available featuring the P3 logotype: > > Will it be
2005-08-04 by Nick Rothwell
> A high-quality Fruit of the Loom T-shirt, in L or XL sizes, is now > available featuring the P3 logotype: Will it be available in kit form? (If I could buy the components I could build a P3 hoodie.) -- nick rothwell -- composition, systems, performance -- http://www.cassiel.com
2005-08-04 by colinfraser_com
Folks, A high-quality Fruit of the Loom T-shirt, in L or XL sizes, is now available featuring the P3 logotype: http://www.sequentix.com/p3t.jpg The shirts are navy blue, with matt silver text. These are 14 ukp shipped in the UK, or 15 ukp for the EU, US and probably most other de
2005-08-03 by Zed Velkovich
How do I see a position or note of each knob on this LCD of P3? Looks very small. Is it easy to see note numbers and other stuff that is controled buy knobs? How that works? Is it possible to install 2 large LCDs like 2x40 Displaytech "LCD 402A LED" and than see setings for each
2005-08-03 by analog1k
--- In analogue-sequencer@yahoogroups.com, Zed Velkovich wrote: > How do I see a position or note of each knob on this LCD of P3? If you want to see what note is assigned to each of the 16 knobs, in EDIT MODE, you hold down FUNC and press the any of the buttons numbered 1-16 - th
2005-08-03 by analog1k
--- In analogue-sequencer@yahoogroups.com, "Richard Scott" wrote: I don't see any harm in it. My Micron is hooked up to my P3 to provide the rhythmic parts, while my modulars take on the heavy sequencing duties. You won't be dissapointed with a P3 and it's capabilities, go on...
2005-08-03 by Richard Scott
I wonder is anyone using an alesis micron with a p3? - I'm not after a lot of polyphony so i'm thinking this might be a nice little portable setup - any drawbacks? Richard [Non-text portions of this message have been removed]
2005-08-02 by Paul Nagle
analog1k wrote: >Make sure you don't push the wrong button. > > > Be careful with that Novation KS Paul. ;) Good point. Another dumb aspect of its design: you can silence three multitimbral parts by hitting one of the part buttons by accident. But the worst thing, by far, is its
2005-08-02 by Paul Nagle
Richard Scott wrote: >Hi Paul, thanks for your answers, it sure looks like the P3 is something I need to investigate - so few technologies since the old analogues are really suited to improvisation... > > Yep. The closest thing I found before this for live improv was the Notron -
2005-08-02 by Colin f
Well I nearly got there first... I've got a couple of things to add to Paul's answer. > It outputs the pattern data and also can send "thru" data if you > generate yours arps on a master keyboard. The thru stuff can even go > through FTS One thing that a couple of users have aske
2005-08-02 by Paul Nagle
Richard Scott wrote: >Hi again > >I am really interested in the P3 as a semi improvisational tool/random generator and am wondering how it will work in practise. I don't want to just play patterns i prepared earlier - but nor do I want total chaos. Its difficult without seeing on
2005-08-02 by Richard Scott
"Where are you? If you're anywhere in the north west of england I'm sure a demo can be arranged... :)" Hi Paul, thanks for your answers, it sure looks like the P3 is something I need to investigate - so few technologies since the old analogues are really suited to improvisation..
2005-08-02 by analog1k
--- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: > analog1k wrote: > > >Hehe. I deleted all of Paul's sequences, I prefer > >an empty P3, sorry Paul, no hard feelings. > > > > > When you can walk the ricepaper without leaving a trace, it's time to > leave, grasshopper
2005-08-02 by analog1k
--- In analogue-sequencer@yahoogroups.com, "Richard Scott" wrote: > "Where are you? If you're anywhere in the north west of england I'm sure a demo can be arranged... :)" > > Hi Paul, thanks for your answers, it sure looks like the P3 is something I need to investigate - so few t
2005-08-02 by Richard Scott
Hi again I am really interested in the P3 as a semi improvisational tool/random generator and am wondering how it will work in practise. I don't want to just play patterns i prepared earlier - but nor do I want total chaos. Its difficult without seeing one to know how immediate t
2005-08-01 by Colin f
> Can P3 owners like myself get a change of knobs with these colours > you're gonna be using on new production P3s. The knobs are available from Rapid in the UK, part numbers 32-0470 and 32-0475 They cost 10p each in quantities of 20, so if you buy 20 grey and 20 white it should
2005-08-01 by analog1k
> Hi Colin, > > Can P3 owners like myself get a change of knobs with these colours > you're gonna be using on new production P3s. > > Cheers. > > > That is how the production P3 looks, however I have switched over to > using a combination of white and grey coloured knobs now, as
2005-07-31 by Colin f
> Zed Velkovich wrote: > > Hi, > > Where can I see how ready built P3 look like? > > http://www.sequentix.com/ > > First pic. Thanks Gert. That is how the production P3 looks, however I have switched over to using a combination of white and grey coloured knobs now, as it improves