Re: [disklavier] How to convert Midi to ESEQ?
2018-11-13 by Tim Hirons
Ralph I found the midi to ESEQ converter you mentioned. Thank you. Any suggestions for a utility to modify the play order? Tim
Messages
Browse messages
Page 9 of 274 · 13692 messages matched
Re: Source for MX80 parts
2018-11-12 by crumhornx@...
Hi tnmshd, Its taken a long time. I have sourced some replacement solenoids but the Yamaha person here has told me that the MX80 I/O board is Nil Stock, No
Re: [disklavier] Re: How to convert Midi to ESEQ?
2018-11-12 by Tim
Thanks all! ... Thanks all! On Nov 12, 2018, at 11:18 AM, JEFFREY SYKES jeff0ldbean@btinternet.com [disklavier] wrote: Hi Tim,
Re: [disklavier] Re: How to convert Midi to ESEQ?
2018-11-12 by JEFFREY SYKES
Hi Tim,Try this, as it is what i am using right now on my Win 10 PC.Buy a USB to MIDI interface off Ebay, About £3:59.They are all the same.Download Yamplayer
Re: [disklavier] DKC-850 Upgrade
2018-11-12 by Ralph Specht
I traded one in to Darrell’s Music in Nashua Nh when I upgraded to the Enspire Disklavier. Was working perfectly. ... I traded one in to Darrell’s Music in
DKC-850 Upgrade
2018-11-12 by waruaki@...
I’m interested in upgrading my Markii XG Pro with DKC500RW control unit to a DKC-850. Can a group member recommend a place to purchase an 850 at a reasonable
Re: How to convert Midi to ESEQ?
2018-11-12 by wam@...
Ralph s advice is correct – Try utilities in these old resource pages which are still active: http://www.carolrpt.com/musicsoftware.htm
Re: [disklavier] How to convert Midi to ESEQ?
2018-11-12 by Ralph Specht
Check to yahoo website or carolrpt.com for Disklavier utilities. There is a utility to convert midi files to Eseq. Warning: you will need to locate 720kb
How to convert Midi to ESEQ?
2018-11-12 by Tim Hirons
I googled but struck out. Any recommendations for software that can do this so I can play recently created midi songs on a 1988 MX100a? Thank you Tim
Re: [disklavier] Move my midi files to piano disk
2018-11-11 by Tim Hirons
It is MX100a. Which means I need software to convert My files to ESEQ. Working on that now thx. ... It is MX100a. Which means I need software to convert My
Re: [disklavier] Move my midi files to piano disk
2018-11-11 by Tim Hirons
Looks very much like the MX100a. Only difference I see is on my moms, under the keyboard bottom right is an additional midi in out port ... Looks very much
Re: [disklavier] Move my midi files to piano disk
2018-11-11 by Tim Hirons
I don’t know. It’s at my moms house. Upright black piano bought in the 80s. Usually just pop a disk in and play the tracks. Orange-ish led screen. Trying
Re: [disklavier] Move my midi files to piano disk
2018-10-28 by Mark Fontana
What model of Disklavier are you targeting? What is the model on the control unit? e.g. DKC-850 ... What model of Disklavier are you targeting? What is the
Move my midi files to piano disk
2018-10-28 by Tim Hirons
I have created individual midi files for each piano song I created in Cubase. Do I just copy that midi file onto a disk and pop it into the piano and it will
Re: [disklavier] Troubleshooting pk board issue
2018-10-17 by Laurence ABC
Mine had a buzz, they came several times, replaced board, nothing helped. They suggested I send it to them for weeks of diagnosis. I fixed it myself with an
Re: [disklavier] Troubleshooting pk board issue
2018-10-17 by Don Malloy
The problem began with the dkc850 not playing. I put the 500 on and it played the old floppy I had. Yamaha indicated the problem was probably unrelated to the
Re: [disklavier] Troubleshooting pk board issue
2018-10-17 by Laurence ABC
What’s the problem? A buzz? ... What’s the problem? A buzz? On Oct 16, 2018, at 5:16 PM, Don Malloy tennesseedjm@gmail.com [disklavier]
Troubleshooting pk board issue
2018-10-17 by Don Malloy
Hi - I have been working with Yamaha to resolve a problem with the DC2 II XG player on my C2. 500 was upgraded to a DKC850 when I bought it from a Yamaha
Re: [disklavier] mx100a upright
2018-09-12 by Ralph Specht
You need a 720KB floppy. Also, you can use DKC-850 or DSR1(older model) connected to the Midi ports on your MX100. The DSR1 will support the 1.44 MB floppy,
mx100a upright
2018-09-11 by vincitore8@...
Hi, Could someone please direct me to a thread or website where i could find out about the updates and hacks to use the mx100a with modern devices? Its in
Opinions on DU1a Mark III (2006) model Silent System (evolution of Silent Systems)
2018-09-10 by dave@...
Is there a big difference in the silent systems between the 2006 Mark III DU1a and newer models? I suppose the digital sample may be better, but has the
Re: [disklavier] What to do with a DKC-55 disklavier.
2018-09-06 by Carol Beigel
I forgot to mention a possible easier solution. Look under the keyboard on the left side for a little box. Make sure the volume is turned up. Carol Beigel
Re: [disklavier] What to do with a DKC-55 disklavier.
2018-09-04 by Carol Beigel
I believe that is a play only model. Look in your Owners Manual and turn the keys back on. The DKC850 would give you access to Disklavier Radio. Another
What to do with a DKC-55 disklavier.
2018-09-04 by saumyendra.basu@...
Dear Group We have a Yamaha baby grand fitted with DKC55. After moving, the playback works from floppy disks but the key stroke movement has stopped. I have
Disklavier Power unit repair report.
2018-09-02 by tnmshd@...
I tried to repair the Disklavier power unit during the summer vacation. Two of these three were completely recovered. One of them is unknown reason but the
Re: [disklavier] Re: The future of loading files to play a Disklavier
2018-09-02 by smalston@...
Thanks Carol, That was the issue. I hope Yamaha steps up their support of this app as it lacks some of the functionality of the PRC100.
Re: [disklavier] Re: The future of loading files to play a Disklavier
2018-09-01 by Carol Beigel
Sounds like you are using the wrong controller. The EN controller is for the new Enspire; the E3 for the E3, etc. Download the plain Disklavier controller.
Re: The future of loading files to play a Disklavier
2018-08-31 by smalston@...
Hello Carol, I m trying to use the EN controller on my iPhone to control my Yamaha Disklavier Mark IV The EN controller never sees my Disklavier. Hitting
Re: [disklavier] MX100II - troubleshooting
2018-08-21 by George F. Litterst
Good afternoon, everyone. Bob, your description sounds like you have a Mark II. Upright Mark IIs, made for the U.S. market, typically say the following on the
Re: [disklavier] Re: MX100II - troubleshooting
2018-08-21 by bobpinsker@...
The printed name I was referring to is on a plate attached to the main power switch underneath the treble end of the keybed. The only printing on the
Re: MX100II - troubleshooting
2018-08-16 by anchimviet@...
I recently found a beautiful Yamaha piano with the Disklavier MX100A here in Saigon, Vietnam of all places. While everything is functioning well at the moment,
Re: [disklavier] Re: MX100II - troubleshooting
2018-08-15 by George F. Litterst
Good morning, everyone. Bob, I recommend that you call Yamaha Piano Service: (800) 854-1569. Before doing so, I recommend that you get the piano’s serial
Re: [disklavier] Re: MX100II - troubleshooting
2018-08-15 by Michael Jay Jones
If the controller is completely dark, you may have lost the power supply. With schematics in hand, you can check the power into the supply (yes, you could
Re: [disklavier] Re: MX100II - troubleshooting
2018-08-15 by uecker.juneau@juno.com
Just jumping in to this to say a few things. I have the MX100A model and it is true that you do need a functioning floppy drive with disk spinning in order to
Re: MX100II - troubleshooting
2018-08-15 by bobpinsker@...
(I should add that when I say the fuses are fine, I mean that I removed each one in turn and checked it with an ohmmeter - zero resistance.)
Re: MX100II - troubleshooting
2018-08-15 by bobpinsker@...
There is no number on the front of the controller, strangely enough. Just says disklavier . And the piece of wood in which it is mounted goes from one edge of
Re: MX100II - troubleshooting
2018-08-15 by bobpinsker@...
No, unfortunately that s not it - I checked all three fuses in the power supply and all are perfectly fine. The big electrolytic capacitors look ok, too - not
Re: [disklavier] MX100II - troubleshooting
2018-08-14 by George F. Litterst
Good afternoon, everyone. Bob, what is the “DKC” number on the front of the control unit? In my experience, it is not necessary to have a working floppy
Re: [disklavier] MX100II - troubleshooting
2018-08-14 by Carol Beigel
Sounds like you blew a fuse. There are 3 of them on the main board inside the bottom of the piano. These are replaceable from Radio Shack. Just get the
MX100II - troubleshooting
2018-08-14 by bobpinsker@...
Hi, all - First post! Naturally, it s motivated by trouble with my old Disklavier, MX100II. I gather it is from circa 1996 or 1998? It is a true Disk
Damper pedal adjustment DC7A
2018-08-06 by Joe Palmer
Hi All,I adjusted the damper pedal on my C7 Mark 3. It was way out. What a difference that made. But, I came to step 12 in the manual which is to
Re: KD / PD Error
2018-08-05 by sergio.pitchon@...
Dear Prabhu, You re perfectly right!!! One cable was bad connected!!! Everything is ok now!!! Thanks for your help!!!
KD / PD Error
2018-08-05 by aswath prabhu
KD /PD error... Nothing to worry. It means keyboard connection or pedal connection is loose. During installation, the technicians free the Keyboard from
KD/PD CONNECTION ERROR
2018-08-04 by sergio.pitchon@...
Dear friends, I ve bought in Dec 2013 a Disklavier E3. Since there the piano has worked perfectly. Today, when I plugged it on, I receved the following error
Re: Elton John's on Disklavier TV
2018-07-21 by magic_midi@...
Hi The only Elton John disk I have is the YPL-1088E YOUR SONG / ELTON JOHN SONG ALBUM if that is any help.
Re: [disklavier] The future of loading files to play a Disklavier
2018-07-18 by magic_midi@...
Hi Roger There are a number of programs that you can use. RootARipper and Yamplayer will both copy Yamaha s files to your hard disk. Which can then be left as
Re: The future of loading files to play a Disklavier
2018-07-16 by Skanter123
From Carol begel: “If you do want to upgrade your Disklavier to an IP address,, you can use a $50 wireless Bluetooth cable (MD-BT01) and plug it into both
RE: [disklavier] The future of loading files to play a Disklavier
2018-07-16 by <ron@...>
It’s not the ESEQ format that’s the hard part. ESEQ is a light treatment on MIDI. The issue is the Yamaha disks have an unformatted block 0 which makes it
Re: [disklavier] The future of loading files to play a Disklavier
2018-07-15 by rldavis
Carol, I have a 20 year old Yamaha DC-7 with a DKC500XG control unit that uses 3-1/2 floppy discs. I have a collection of 30 to 40 floppy discs that I would
The future of loading files to play a Disklavier
2018-07-15 by Carol Beigel
Greetings! I have just returned form the Piano Technicians Guild convention and have seen the latest from Disklavier, PianoDisc and QRS Pianomation. All 3