Yahoo Groups archive
Messages
Page 47 of 236 · 11758 messages matched
2013-03-27 by Ted Summers
reseat all the IC s on the audio board that are socketed. you may have a bad connection to a chip. you may also have a floating ground or voltage on the ground
2013-03-27 by Martin
Hi All can someone help me as my emax 1 rack is petty useless to me as is. someone previously posted this on my behalf and i still have the same problem after
2013-03-27 by Ted Summers
Ever hear / seen a wire / cable hooked to nothing that ends up acting as an antenna and injecting signal into a circuit from a radio station to that circuit? I
2013-03-27 by Laurent/LIFELIKE
Hello I have one Emax 1 SE HD Rack to sell, the box is an average shape, but the hardware works perfectly, and its sleeping here in the studio so i guess it
2013-03-27 by Laurent/LIFELIKE
Hello I have one Emax 1 SE HD Rack to sell, the box is an average shape, but the hardware works perfectly, and its sleeping here in the studio so i guess it
2013-03-27 by krikor kouchian
even if the emuser USB is unplugged from the computer and off? ... in ... when ... with ... circuit ... works ... freezes, ... -- http://www.krikor.fr
2013-03-27 by Ted Summers
It wouldn t be recommended to have both cables plugged at the same time. you could get some feedback / signal that shouldn t be there, difference in reference
2013-03-27 by krikor kouchian
Hi you mean that if a midi cable and a serial cable are connected to the machine at the same time it won t work, even i m not using only one? that could be the
2013-03-27 by Ted Summers
It could be the IC, or the other components in the midi / serial circuit as this is shared. You don t have MIDI and serial both hooked up at same time,
2013-03-27 by krikor kouchian
Can it be that the IC8 6850 being defective? i don t get the error messages. ... need ... -- http://www.krikor.fr +33632199413 For Live&Dj bookings contact:
2013-03-26 by cbutera23
Emax I, I am trying all the different outputs, but I am mostly interested in splitting the sync signal that I am sending to my monotribe.
2013-03-26 by Nik Kinloch
What outputs are you listening to when this happens? What Emax are you using?
2013-03-26 by cbutera23
I am having an issue with trying to assign outputs in my presets. Whenever I set the output to anything but the stereo out, I have to hit the key twice to get
2013-03-26 by Kalle Windefalk
You need the SL mk II editor software to re-assign the buttons, pads and pots. There s a manual on how to do this on novations website. Read it through and
2013-03-26 by cbutera23
How do I assign the drum pads to one octave of keys?
2013-03-26 by Kalle Windefalk
Nice :) I ll check what I can do with the other settings Cheers Kalle ... [Non-text portions of this message have been removed]
2013-03-26 by papluss
template works great! do you think we can control the emax further (sampling/ pitch shift/ loop points....) thanks! dave
2013-03-24 by Andy
I ll give it a try thanks ted Sent from my iPhone
2013-03-24 by Ted Summers
Reseat EPROM IC 13 is the first thing to attempt. Regards, Ted On Mar 24, 2013, at 6:41 AM, Andy Simps wrote: hi there my emax wont boot up i hear the
2013-03-24 by Ted Summers
Decided to jump into the deep end of the pool??? :-) You have to realize you just hooked TWO unkowns onto the SCSI chain and it could be either one or a combo
2013-03-24 by windefalk
No worries! Let me know if you want any help or if you have suggestions to the template! /Kalle
2013-03-24 by Andy Simps
hi there my emax wont boot up i hear the harddrive working all the lights are on and the lcd screen has black boxes all over the top any idea whats wrong ?
2013-03-24 by e9000g
Hi all, i am getting a hard disk error when trying to format a Compact Flash (tried an old akai 32Mb and 512Mb kingston 50x) OS is copied from the floppy its a
2013-03-23 by cbutera23
Sorry it took me so long to thank you. I am going to try this out now!
2013-03-21 by krikorola
hello the only info i could find is on the emax group here: http://launch.groups.yahoo.com/group/emax/message/200 I really don t understand what s the problem.
2013-03-20 by Nik Kinloch
Thanks Ted, splitting at the floppy connection worked fine, only used the +5 and ground as well. Nik
2013-03-20 by Ted Summers
I have taken a splitter at the floppy and also at the main connection. Seems to work fine in either case. Media drives do not use the +12V, they only actually
2013-03-20 by mcnik_k
Hi all, I m in the process of upgrading an Emax SE Rack to SCSI and installing a card reader. On my first Emax, the HDD power comes from the main PSU loom, it
2013-03-20 by Ted Summers
The video for this on mpcstuff says that it is ATAPI (subset of IDE) NOT SCSI. So no, that will not work in the emax. You need either an PCD-60b or PCD-50b. -T
2013-03-20 by djo3yk
I have a SCSI multi card reader that works in my MPC 2000xl (http://www.mpcstuff.com/2000xl-mcd-multi-card-reader-drive.html). Is it possible to use this in
2013-03-19 by krikor kouchian
i exchange 20 and 21, it got worst then i put things back the way they were and it s working normally. So it deffinitely could be a bad connection to the IC21,
2013-03-19 by Ted Summers
So change it back- and see if it reverts to old behavior.... the other possibility is the connection to the chip (the socket) has an issue and replace the
2013-03-19 by krikor kouchian
i put it back the way it was and now it works SHAZAM http://www.krikor.fr +33632199413 For Live&Dj bookings contact: cedric@referenceprods.fr 2013/3/19 krikor
2013-03-19 by krikor kouchian
i exchanged IC21 and IC20 (channel 1&2) and now it s bursting all the time. http://www.krikor.fr +33632199413 For Live&Dj bookings contact:
2013-03-19 by krikor kouchian
i don t get the explanation for the level calibration, someone knows which sound is supposed to be used for that? http://www.krikor.fr +33632199413 For Live&Dj
2013-03-19 by Ted Summers
yes, you can still get them. ... [Non-text portions of this message have been removed]
2013-03-19 by krikor kouchian
thank you i m gonna do that right nowi but are those chips still available? http://www.krikor.fr +33632199413 For Live&Dj bookings contact:
2013-03-19 by krikor kouchian
yes that is 0 and 9 actually then the code. i wanted to calibrate levels (which you can do from SE to PLUS i think) but i don t know if this can help with my
2013-03-19 by Ted Summers
Move the chip(s) from one channel to another on the audio board and see if the problem moves. If so, then it s the chip(s) for that channel. -T ... [Non-text
2013-03-19 by Ted Summers
I think you do like 0 and 0 again, and there is a passcode which is EMAX like on telephone keys (3629). Something like that, if I recall. -T ... [Non-text
2013-03-19 by krikor kouchian
i tried with different OS, with the original OS 3.2, midi dump works perfectly, but not with EMuser EMXP. With all other os it doesn t work either with midi
2013-03-19 by krikor kouchian
I found that the voice 2 out of the 8 voice is the one buggin. Anybody knows if there is a fix? http://www.krikor.fr +33632199413 For Live&Dj bookings contact:
2013-03-19 by krikor kouchian
I found it for the PLUS OS, you need to do MASTER, 0, 9 then type code 3629. http://www.krikor.fr +33632199413 For Live&Dj bookings contact:
2013-03-19 by Robert Paul
I m not sure if I have the Plus OS or not honestly.... But to get to the calibration on my OS is different than the walkthrough on cyborgstudio.com, so it s
2013-03-19 by krikor kouchian
Hello How do you access the calibration menu in the PLUS OS? Thanks Best K http://www.krikor.fr +33632199413 For Live&Dj bookings contact:
2013-03-19 by krikor kouchian
Hi I get a weird behavior on my emax1 Every 8 strock on the keyboard i get a loud distorted sound on the sample, the following strock sounds a bit aliased
2013-03-19 by krikor kouchian
And i get the same message using the EMUSER, and the emax freezes, i need to reboot it. http://www.krikor.fr +33632199413 For Live&Dj bookings contact:
2013-03-19 by krikor kouchian
I checked the jumpers and it was on ID0 (no jumper installed). http://www.krikor.fr +33632199413 For Live&Dj bookings contact: cedric@referenceprods.fr
2013-03-19 by krikor kouchian
Hi i get some error message while trying to do a sample dump with DSP-Quattro: ABORTED - BAC ACK for packet #0000 anyone knows what it means? best K
2013-03-19 by Krikor Kouchian
It just sticks out 1/4 of an inch, a lot better than the 50b http://www.krikor.fr +33632199413 Booking dj & live: cedric@referenceprods.fr ... [Non-text