Re: Emulator II+/EmulatorII+HD & SP-12 brochures
2011-02-03 by Michael M
Can you scan them (in colour) and upload them to the files section?
Messages
Browse messages
Page 93 of 236 · 11758 messages matched
Re: [emax] Emulator II+/EmulatorII+HD & SP-12 brochures
2011-02-02 by Ing. Andrés Cortez Acereto
Hi, I m interested....I`m in San Diego Ca. area, ... How Could I get them? Thank s, ________________________________ De: michael.a.padilla
Emulator II+/EmulatorII+HD & SP-12 brochures
2011-02-02 by michael.a.padilla
Slightly off-topic, but as we all are E-mu Systems fans (at least of the Emax), I m posting this here. I have two original full-color brochures of the above
Re: [emax] EMAX II CDROM Drives
2011-02-02 by tu@...
Try the CD300 when you get it, you may have a different version to the one I tried. /Tristan
Re: [emax] EMAX II CDROM Drives
2011-02-02 by Simon Forsyth
Bugger.. I just ordered a CD300.. Well thanks for the info.. will have to compile a definitive list Simon ________________________________ From:
Re: [emax] EMAX II CDROM Drives
2011-02-02 by tu@...
Hello Simon, I have tried the following CDROM drives but none of them work with the Emax II. All of them work with the ESI-2000 and Kurzeil K2500, so I know
EMAX II CDROM Drives
2011-01-25 by Simon
Hi All I have seen the list of compatible CD-ROM Drives issued by Emu UK, but wondered if anyone had any experience with any later units?.. Here is the list I
Roy Thomas invites you to connect
2011-01-25 by Roy Thomas via Yahoo!
Join Roy Thomas on Yahoo! Messenger. Come chat with me, share files and more. Stay in the loop with all your friends. Get started :
Re: [emax] RE: EmaxII Motherboard
2011-01-23 by Steve Gray
I am in California USA zip 95060 Thanks , Steve On Sun, Jan 23, 2011 at 11:42 AM, Simon Forsyth ... [Non-text portions of this message have been removed]
Re: [emax] RE: EmaxII Motherboard
2011-01-23 by Simon Forsyth
Where are you based matey?.. are you Stateside or EU?.. difficult to know what one of these is worth, but I d probably be prepared to pay between £50-100
RE: EmaxII Motherboard
2011-01-23 by dwv1957
Still for sale. I have an EmaxII motherboard, with the ram expansion for sale. It is a 2 meg stereo motherboard, and the expansion board has 4 megs on it,
Re: Adaption Emax 1 SE for SoundDesigner?
2011-01-16 by esynthesist
If you mean: adapted Emax SE OS for use with SoundDesigner for Emax then: see http://www.emxp.net/Additional_downloads.htm
Adaption Emax 1 SE for SoundDesigner?
2011-01-16 by Nis Grella
Does someone have this for me? Greetz Syncla
only cause i trust you...
2011-01-15 by el Baronio
[Non-text portions of this message have been removed]
FW: [AH] FS: DrumStuff
2011-01-14 by el macaco
THought someone might want his Eamx II Rack 8mb at $150. Not mine, email the guy below. ... [Non-text portions of this message have been removed]
Re: [emax] FS: Emax II Motherboard
2011-01-14 by Steve Gray
Did you ever figure out what you want for the EMAX memory ? Steve ... [Non-text portions of this message have been removed]
Re: [emax] FS: Emax II Motherboard
2011-01-14 by Simon Forsyth
Hi I m quite interested in the Spare MB as I have a rack unit I d like to ressurect. The Extra memory is even more enticing. How much did you want for it and
from My Doc
2011-01-06 by el Baronio
[Non-text portions of this message have been removed]
Re: [emax] FS: Emax II Motherboard
2010-12-30 by Steve Gray
Thanks for the note . I just picked up the E-MAX II rack mount with a bunch of other stuff . I would take $100 for it as is with the 1 meg memory . I m not
Re: Emax 2 model number 2213 Help required.
2010-12-23 by Simon
Hi Piers You should be able to find the Emax II OS in the files section of this group. With this image, you should be able write to a floppy using EMXP. Which
Emax 2 model number 2213 Help required.
2010-12-23 by Piers Dent
Hi Emax group. I am new to the group and in need of a little assistance. I have an Emax 2 model number 2213 and I have it listed on Ebay at the moment. I have
Re: [emax] Injury to moderator please read. Richard/Stacy at Route 66
2010-12-16 by Rish
Mikie Thank you so much for your thoughts and prayers, I will pass this message on to Richard. Stacy Sent from my iPod ... [Non-text portions of this message
Re: [emax] Injury to moderator please read. Richard/Stacy at Route 66
2010-12-16 by Emax2@...
Hello Stacy So very sorry to hear about rich. Would you mind if I call and pray for him and your family?that Jesus would provide for all of your current needs
Injury to moderator please read. Richard/Stacy at Route 66
2010-12-16 by mishon53511
I am Stacy Walsh many of you may know my husband Richard aka Rish owner of Route 66 and moderator of many synth related Yahoo groups. I am coming to you all
Re: Emax II E3 note sticking
2010-12-06 by mud_plugga
Just a quick update. After leaving the keyboard for a few days while I was away, I returned to find it all working properly again! That said, I have found a
Re: Emax II E3 note sticking
2010-12-02 by mud_plugga
DX5, Is checking traces - and repairing them - an easy task for a non-solderer (or someone with no electronics skills)? I ve built PCs before but that was
Re: Emax II E3 note sticking
2010-12-02 by mud_plugga
Thanks for the reply. The spring hadn t fallen off - I last cleaned it months ago and it has been working fine up until yesterday (I then opened the keyboard
Re: Emax II E3 note sticking
2010-12-02 by emax_dx5
You can do a Midi out test (using the MIDI SCOPE or any external midi device) just to confirm that there is not sent a NOTE OFF command Assuming the spring is
Re: Emax II E3 note sticking
2010-12-02 by Niklas N
It s probably a hardware problem. It sounds like it could be the key spring, as you mention. Have you checked if it is located centrally between the two copper
Emax II E3 note sticking
2010-12-02 by mud_plugga
While playing with my 4Mb 2212 today, I noticed that the E3 note is sticking and will not turn off. It was working fine yesterday..... I had a quick look and
Re: [emax] USB to RS422
2010-11-30 by Andres Medina
Alchemy 3.0 does sample transfers to various samplers. ________________________________ From: Ted Summers To: emax@yahoogroups.com Sent:
Re: [emax] USB to RS422
2010-11-30 by Ted Summers
1) Emax uses RS422 with a specific sync clock that most RS422 adapters don t have. 2) There has been much discussion about this previously and there is a USB
USB to RS422
2010-11-30 by Niklas N
2 questions: 1) Is there any one who has tried RS422 to RS232 and EMXP? 2) Is there any one who have tried any USB device, like USB cd-rom or USB memory whith
Need more EMAX II samples
2010-11-27 by Kyle
Going to do HD upgrade but where can I get more EMAX II samples via FTP or floppy or other media to load? I bought this used and appears to only have initial
Re: Emax 2 memory
2010-11-26 by dwv1957
Doesn t anyone ever check the archives, if you do a search you will find all the info on this, but just for the record- It does work. -You need an emax with
Re: Emax 2 memory
2010-11-26 by Simon
I guess the first stage of testing would be if I could transplant my known working 8Meg exp board into one of my other Emaxes and then replace the EPROM and
Re: [emax] Re: Emax 2 memory
2010-11-26 by Rish
I have the EPROM burner and will burn EPROMs for this project for free until we figure it out and after that I would charge a small fee. Also it is my
Re: Emax 2 memory
2010-11-26 by Simon
Wow.. interesting and informative Ted.. I have an 8Mb Emax and a couple of 4 meg machines.. I d be quite interested in trying them to see if that trick could
Re: Emax 2 memory
2010-11-25 by Everett
Ted I didn t forget about you, I just haven t de-racked my emax yet. I think the list member you speak of upgraded a 2MB model, so that would fit the theory I
Re[2]: [emax] Emax 2 memory
2010-11-25 by tu@...
It is possible the 8MB EEPROM image did not work in your 1MB Emax II because the base RAM is different. It would be interesting if you could get a 3, 5 or 7MB
Re[2]: [emax] Emax 2 memory
2010-11-25 by tu@...
Yes, that should work. As well as the DRAMs, you need either need the install disk or to copy the EEPROM data from an Emax II that has already had its RAM
Faulty Emax 2 (2213) ?!
2010-11-24 by blomgren.johan
Hello everyone, My Emax 2 displays a error in G-RAM test (i have uploaded a photo of the LCD in Photos-Miscellaneous). The only sound I get from it is a static
Re: [emax] Emax 2 memory
2010-11-24 by Ted Summers
That is if you have 1MB RAM- if you have 2MB it may be possible to update it someway. Although my efforts were not successful. I had 2 units- 1 with 1MB and
Re: [emax] Emax 2 memory
2010-11-24 by Ted Summers
The issue isn t the circuit- schematics are available. The issue is that: 1) The upgrade disks are not available. 2) The upgrade requires registered PALs. So-
Re: [emax] Emax 2 memory
2010-11-24 by Louis van Dompselaar
So if I ever come across enough DRAM chips (which is a bit IF anyway) I would only need the install disk (if I can get that as well...) I m not actively
Re: [emax] Emax 2 memory
2010-11-24 by tu@...
I just checked the memory expansion instructions and you are correct. The PALs that come installed in the memory expansion board do not need to be changed
Re: [emax] Emax 2 memory
2010-11-24 by Louis van Dompselaar
I think my question was more whether the board would use different PALs with 2MB and 8MB, I wasn t quite sure after reading the document, as it doesn t say
Re: [emax] Emax 2 memory
2010-11-24 by tu@...
The 2MB memory expansion kits included both DRAMs and PALs, so I expect most expansion boards would not have the PALs already installed unless they have all
Re: [emax] Emax 2 memory
2010-11-24 by Louis van Dompselaar
Agreed. For the price of manufacturing that double sided PCB alone you would buy a fully expanded Emax II. IF you can even find enough DRAM chips and a PAL
Re: [emax] Emax 2 memory
2010-11-24 by tu@...
I believe Rob at the Emulator archive has the code for the PALs. It would certainly be possible to clone the Emax II memory expansion board, but given the time