Yahoo Groups archive
Messages
Page 16 of 56 · 2773 messages matched
2009-12-20 by dougc356
Sorry for quality of this question, but you are applying a varying signal to the "cv in" jack next to the "pulse" jack, right? Also, the "strobed" light has to be lit. I could also be thinking about something completely different. Perhaps you are talking about the left hand side
2009-12-20 by dougc356
Hi Ross, make sure that the cv input is fed by something changing at a different rate than the pulse input. If you happen to have a cv that is perfectly in time with the pulse timing, the 250e will sample the exact same value every pulse, and the stage will not change. Doug --- I
2009-12-20 by amnesia
Nice one Peter Would like to see a photo of your system, you have made me interested in the Kin Port again. Regards Ross PeterB wrote: > > A new owner of a 200e and while I always thought I was modular > literate I am still fighting my way through the system. > > I hope that some
2009-12-20 by ross healy
hi all I am totally stumped by the Pulse in Stage Addressing. I put a pulse in but it never seems to move the stages about? The CV works and if I patch a pulse in to start adv it works? Any ideas? Thanks Ross
2009-12-20 by PeterB
A new owner of a 200e and while I always thought I was modular literate I am still fighting my way through the system. I hope that some of you will be able to help with tips and tricks. Here is a little video of my first efforts, as compared to what the rest of you are doing prob
2009-12-19 by dougc356
Holy cow thanks for this trick. It's a clock multiplier! And it can be skewed. Really cool. Doug --- In 200e@yahoogroups.com, jon schatz wrote: > > > On Dec 18, 2009, at 8:05 AM, dougc356 wrote: > > > Hi folks, I need a clock divider. > > > > Here's the use case: > > 281e->Strobe
2009-12-19 by Chris Muir
I've had a couple fresh inquires about the Pendulum/Ratchet recently, and I'm trying to gauge interest to see if it warrants a second run. If enough people are interested I'll happily do a second run, but I would have to get at _least_ ten solid orders before it makes sense to or
2009-12-19 by dougc356
Hi Matt, this doesn't really work when you are using strobe mode. The stages are not necessarily selected in order. In this case you need to divide the strobe pulses directly. Doug --- In 200e@yahoogroups.com, "mritenburg" wrote: > > > > --- In 200e@yahoogroups.com, "dougc356" wr
2009-12-19 by mritenburg
--- In 200e@yahoogroups.com, "dougc356" wrote: > > Hi folks, I need a clock divider. > > Here's the use case: > 281e->Strobe input on 250e. Every x strobes, I want an event. use pulse 1 or 2 out of the 250 and only program a pulse for every X stages. Example: 1. Create an 8 stage
2009-12-18 by jon schatz
On Dec 18, 2009, at 8:05 AM, dougc356 wrote: > Hi folks, I need a clock divider. > > Here's the use case: > 281e->Strobe input on 250e. Every x strobes, I want an event. you can use a triangle wave into a 256e to double its frequency. then send that into the other 256e sections t
2009-12-18 by dougc356
Hi Jon, I wish I could get one of Chris Muir's modules! Doug --- In 200e@yahoogroups.com, jon schatz wrote: > > > On Dec 18, 2009, at 8:05 AM, dougc356 wrote: > > > Hi folks, I need a clock divider. > > > > Here's the use case: > > 281e->Strobe input on 250e. Every x strobes, I w
2009-12-18 by dougc356
Hi folks, I need a clock divider. Here's the use case: 281e->Strobe input on 250e. Every x strobes, I want an event. Can I use the 266e for this? To be honest I am still a little confused about its center section. Seems a quantized value with N=2 could be used to get a division o
2009-12-16 by Richard Lainhart
That seems reasonable, but why only one lamp and not the other? > I think that the gooseneck lamps are driven directly off of the 12 v > supply, so if your new supply is beefy enough it might take a while > for the load of the LEDs to discharge any caps in the line lump power > s
2009-12-15 by Chris Muir
On Dec 15, 2009, at 2:15 PM, Richard Lainhart wrote: > However, since adding the new PS, I've noticed this odd behavior - > when I turn off the system, the right-hand LED lamp flashes or > pulses for while, gradually slowly down over a period of 15 seconds > or so until it finall
2009-12-15 by Richard Lainhart
All: I'd like to ask if anyone else has this seen this phenomenon with their 200e system. I got a new, more powerful external power supply this morning from B&A to replace my original supply that burned out yesterday. I plugged it in and so far everything's working fine. However,
2009-12-15 by Richard Lainhart
> I have seen your patching video on Youtube. Thanks for posting that. Do you use this same configuration for all your performances? I do. It's gotten more complex over time, as I've added to the original configuration, but this has been my working patch essentially since I got t
2009-12-15 by Barry
Hey, that is good to hear. I'm really glad that your 200e isn't damaged. I am looking forward to your macProVideo tutorial. I will get it when it comes out. I have seen your patching video on Youtube. Thanks for posting that. Do you use this same configuration for all your perfor
2009-12-15 by Richard Lainhart
Thanks, Barry. Fortunately, Jon at B&A was able to overnight me a new, more robust power supply, and with that in place, it appears that my 200e didn't suffer any internal damage from its trauma. (I particularly want to thank Jon for getting it out to me so promptly - he really s
2009-12-15 by oxix52
Wow, I hope you get up and running in time and your performance goes well. Good luck, I wish I could be there. On another note, have you thought of doing a tutorial video devoted to the Buchla way of doing things? Maybe something like you did for the Jordan Rudess Online Conserva
2009-12-15 by Richard Lainhart
That's what burned up, yes. I'm assuming, and hoping, it didn't cause any damage to the 200e itself, but I won't know until I get a replacement. I found the same supply at Mouser, and Jon at B&A (who's been very helpful and responsive, by the way) said he would get one out to me
2009-12-15 by don hassler
Wow, very sorry to hear of that, it's just your external switching psu, correct? --- On Mon, 12/14/09, Richard Lainhart wrote: From: Richard Lainhart Subject: [200e] 200e Power Supply To: 200e@yahoogroups.com Date: Monday, December 14, 2009, 7:11 PM Has anyone ever had their 200e
2009-12-15 by Richard Lainhart
Has anyone ever had their 200e power supply burn up? Mine just did.... Richard Lainhart http://www.otownmedia.com http://www.downloadplatform.com/richard_lainhart http://www.vimeo.com/rlainhart http://www.youtube.com/rlainhart http://richardlainhart.bandcamp.com/ [Non-text portio
2009-12-14 by JB
Thanks! I might as well post it here too: Five "long keys" controls one oscillator, each key controls pitch (tuned, one per key), location bends the pitch and controls the rate of the "LFO" that pulses the gate (the rapid attacks). Pressure controls the effect of the fast attacks
2009-12-14 by Richard Lainhart
Yes, beautifully done. Can you tell us specifically how you're using the 222e? > I am using the new 222e live for the first time > > http://soundcloud.com/johan-boberg/oscillatorie Richard Lainhart http://www.otownmedia.com http://www.downloadplatform.com/richard_lainhart http://
2009-12-14 by Chris Muir
On Dec 14, 2009, at 11:21 AM, JB wrote: > I am using the new 222e live for the first time Really nice, Johan. - C Chris Muir cbm@well.com http://www.xfade.com
2009-12-14 by JB
I am using the new 222e live for the first time http://soundcloud.com/johan-boberg/oscillatorie
2009-12-03 by Richard Lainhart
Sorry, the link to the Experimental Intermedia site got corrupted. Here's the full link: http://www.experimentalintermedia.org/concerts/09/december.shtml Richard Lainhart http://www.otownmedia.com http://www.downloadplatform.com/richard_lainhart http://www.vimeo.com/rlainhart htt
2009-12-03 by Richard Lainhart
Friends: on Thursday December 17 at 9PM at Experimental Intermedia Foundation in New York City, composer, performer, and filmmaker Richard Lainhart will be presenting an evening of films and electronic music, including selections from "No Other Time", a full-length intermedia per
2009-12-03 by Richard Lainhart
Friends: the second volume of Puremagnetik's series of Buchla 200e instrument and loop samples in Live, Kontakt, and Logic formats is now available from Puremagnetik: http://puremagnetik.com/index.php?option=com_content&task=view&id=199&Itemid=161 These samples were all recorded
2009-12-02 by dougc356
Hi folks, I vote that the FIX button on the 250e be changed to mean that the stage will sample and hold the external voltage whenever the stage is selected. The reason I suggest this is that I can imagine using four parallel S&H's in the 250e all the time. I can't really see myse
2009-12-01 by dougc356
Thanks folks for the input. I managed to get S&H working using the 266e and the strobe feature on the 250e, plus I tried using the 291e to FM the 261 oscillators together. Great results all around. Doug --- In 200e@yahoogroups.com, Chris Muir wrote: > > > On Nov 30, 2009, at 4:31
2009-12-01 by Chris Muir
On Nov 30, 2009, at 4:31 PM, dougc356 wrote: > Great wikipedia page I had not yet consulted. Only an "OK" page, IMO. I would love to see more people get involved with writing/restructuring it. I've done a little, but it could really use a lot of work. - C Chris Muir cbm@well.com
2009-12-01 by ezra buchla
hm if that 266e function is reducing the voltage range it's a bug. subject to questions of course like is it reproduced on other units? is the same effect for all input voltages? etc. (but look on the bright side, it's microtonal) cause yeah, the idea is that you can indeed use t
2009-11-30 by jon schatz
On Nov 30, 2009, at 3:26 PM, dougc356 wrote: > Hi folks, the nearest thing to S&H on the 200e I can find is the FIX > button on the 250e. you can (mostly) do it with a 266e, see these two write-ups for the details and caveats: http://en.wikipedia.org/wiki/Buchla_200e#266e_Source_
2009-11-30 by dougc356
Thanks Jon. I see now too that one could set up all the stages on the 250e to have desirable consequences, then use the strobe mode to effectively S&H to a quantized result. Great wikipedia page I had not yet consulted. Doug --- In 200e@yahoogroups.com, jon schatz wrote: > > > On
2009-11-30 by dougc356
Hi folks, the nearest thing to S&H on the 200e I can find is the FIX button on the 250e. Seems this button requires manual operation though. It would be great to be able to route a pulse to that section to trigger a FIX. Or maybe by overloading the fix button, two options could b
2009-11-30 by Jason Butcher
Some new 200/200e tracks on each: http://hasslerbutcher.blogspot.com http://fastheadache.blogspot.com - Jason [Non-text portions of this message have been removed]
2009-11-25 by JB
Not only the knobs differ, It had different panel graphics and the LED-animation was simplified for the 260e. The 297 is identical except for the knobs. I think the original 'Barber Shoppe' production run was very limited. 2009/11/25 Joe : > > > --- In 200e@yahoogroups.com, "mrit
2009-11-25 by Joe
--- In 200e@yahoogroups.com, "mritenburg" wrote: > > Hi Guido, just out of curiosity, why the original and not the (e)? > > > I'm looking for an original Buchla issue 260 Duophonic Pitch Class Generator. > > > I like the knobs better. :0 Guido
2009-11-24 by don
Continuing the self-playing style, these are 6 more 291e in feedback as main source, 261e for extra, 266e and 250e in control pieces: http://www.donhassler.com/Donhmain/whatlovereallyis.html
2009-11-19 by mritenburg
Hi Guido, just out of curiosity, why the original and not the (e)? > I'm looking for an original Buchla issue 260 Duophonic Pitch Class Generator. >
2009-11-18 by Joe
Howdy folks... I'm looking for an original Buchla issue 260 Duophonic Pitch Class Generator. Anybody? Thanks for looking Guido
2009-11-17 by giftquestionmark
Hello all, i am parting with a few of my buchla 200 modules: 227 system interface 270 quad preamplifier I am looking for 200 or 200e modules and would prefer to trade, as opposed to sell. I purchased these last september, as part of a group of 4 total modules (227,270,230 and 292
2009-11-12 by mritenburg
--- In 200e@yahoogroups.com, Brian Whittington wrote: > > A fixed negative voltage to the CV in? AFAIK, that doesn't work on the (e) modules like it does on "classic" 200 series modules. You can, however, create slower modulation shapes with the 249 or 250. For instance: 1. loop
2009-11-11 by Brian Whittington
A fixed negative voltage to the CV in? Cheers,Brian --- On Wed, 11/11/09, tartarboy wrote: From: tartarboy Subject: [200e] modulation osc slower To: 200e@yahoogroups.com Date: Wednesday, November 11, 2009, 3:04 AM Hello, I'm trying to figure a way to make the modulation osc on a
2009-11-11 by tartarboy
Hello, I'm trying to figure a way to make the modulation osc on a 261e or 259e go slower...so far i've come up with nothing, and i couldnt find anything searching the archives...any suggestions?
2009-11-08 by Joe
www.myspace.com/thefukawis a load of sudsless laundry all 200e... Guido
2009-11-05 by fhserge
If someone wants to get rid of a 266e, 285e, 297, please send me an email offline: frank.hettlich@gmx.net The only trade I am considering is one of my 261e. I am located in Germany. Frank
2009-11-01 by Andrew
SOLD --- In 200e@yahoogroups.com, "Andrew" wrote: > > Bought these but am not going to build the passive attenuators etc. Selco knobs are same as used on 200e except they fit 1/4" round shafts with locking collet inside. Great for building 200e looking gear etc. 200e panels are f
2009-11-01 by Andrew
Bought these but am not going to build the passive attenuators etc. Selco knobs are same as used on 200e except they fit 1/4" round shafts with locking collet inside. Great for building 200e looking gear etc. 200e panels are from Buchla Knobs = $55 shipped in US / $60 Internation