Re: [Casio_FZ_Samplers] Casio FZ1 Display Woes
2014-11-11 by emma
Looking at the signals that go to it its a 4bit mode there s a lot the ce and w/e and 1and 2 these signals I dont know what 1 and 2 are yet but I do have a
Messages
Browse messages
Page 3 of 3 ยท 145 messages matched
Re: [Casio_FZ_Samplers] Casio FZ1 Display Woes
2014-11-11 by reubenfinger@...
Thanks Lee, I did manage to send a few programs through to the FZ1 using FZDump running Windows XP on VMware on my IMAC but that was before the screen died.
Re: [Casio_FZ_Samplers] Casio FZ1 Display Woes
2014-11-11 by Lee
All I can tell you is I have never had any luck with pc software communication with the fz. I think I once managed to get a file OFF it buy could not get it
Casio FZ1 Display Woes
2014-11-10 by reubenfinger@...
Hello everyone, I tried to repair the failing bars on my screen and unfortunately unseated one of the three carbon ribbon cable for the LCD, I have since been
Saving MIDI and output assignment settings
2014-10-28 by specialjustin@...
Hi, Is it possible to save midi settings when saving a project. When i say project i mean a BANK or FULL DUMP rather than individual voices. So i can just load
Looking for Casio FZ-1 & FZ-10M digital sampling synthesizer book
2014-10-28 by w.james.meagher@...
Hello, I m wondering if any of you out there might have a copy of this book you d be willing to sell? Or perhaps someone has it as a PDF? I can t find one for
RE: best way to load and save library
2014-10-14 by fabrimon@...
Hi Kloendiesel, thanks for the input. I own a FZ20m, looking for the same solution you have (HxC2001 + SCSI2SD). I know that for the FZ20m to save load over
RE: best way to load and save library
2014-07-10 by georg.mueller@...
Get a HxC emulator with HxCFloppyEmulator 2.0.22.0 and SCSI2SD for your Casio FZ-20M. This combo is working fine for me now. Changing the FDD in the FZ-20M is
Re: Newb question - .fzf to floppy export
2014-07-10 by georg.mueller@...
Just get a HxC version of your choice and use the current version of the Software, which is HxCFloppyEmulator 2.0.22.0. It will work just fine. You can
Newb question - .fzf to floppy export
2014-06-24 by ian@...
Hi folks - just picked up an FZ10M from ebay with no library, and sadly lost my old library from when I owned an FZ1 back in the 80s. So have grabbed the
Re: [Casio_FZ_Samplers] FZ-1 disk download
2014-01-29 by charlie midi gfa
thanks you very much , i had asked about half a year ago because i ruined my fl c disk notice that the flc disk is not present in this collection is it known
Re: [Casio_FZ_Samplers] FZ-1 disk download
2014-01-29 by magic_sil ver_box
nice, thank you!
FZ-1 disk download
2014-01-29 by <ahaigh01@...>
Hi all, Here s a link to a large collection of FZ-1 FZF disks..
Re: [Casio_FZ_Samplers] RE: best way to load and save library
2014-01-24 by jammie
the pcd47b does not work in the fz20 ... From: magic_sil ver_box To: Casio_FZ_Samplers@yahoogroups.com Sent: Friday, January 24, 2014 8:30 AM Subject: Re:
Re: [Casio_FZ_Samplers] RE: best way to load and save library
2014-01-24 by magic_sil ver_box
matt, i have read that the HxC floppy emulator works with the casio FZ-series samplers, but i have been too busy to try it on my fz20m. failing that, you might
Re: [Casio_FZ_Samplers] RE: best way to load and save library
2014-01-23 by Lee Borrell
Not that I ve put a card reader in - but having tried to use the PC archivers with the FZ MIDI bulk dump,I should think using a card reader would be miles
Re: [Casio_FZ_Samplers] RE: best way to load and save library
2014-01-22 by charlie midi gfa
just find your fav samples and make one or two disks all the samples contained amonst the user disks , dont hold up to todays standard , i found maybe 50
RE: best way to load and save library
2014-01-22 by <matthillier33@...>
Hi , can anyone outline what they think is the best method to archive casio fz samples and manage / load / save and use them ? are the new floppy / card
Re: Hi, anyone got Lotharek's floppy emulator SD working in your FZ-1/10m??
2013-07-09 by sweetsynthchuck
Yes there too exspensive, has any one tried any of the Chinese floppy emulators?
New file uploaded to Casio_FZ_Samplers
2013-01-01 by Casio_FZ_Samplers@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Casio_FZ_Samplers group. File :
making a new disk for the fz10m and compatibles
2012-12-31 by charles c
well in the spirit of the season i am making a new disk for the fz. its more or less based around GM drum setup and a light weight synth jazz band.... today
Re: Hi, anyone got Lotharek's floppy emulator SD working in your FZ-1/10m??
2012-09-02 by dir_marillion
Normally, your FZ-1 will live for a long long time, as all those synthesizers of this Era do. They have circuits/capacitors/etc that can be fixed or replaced,
Re: [Casio_FZ_Samplers] Digest Number 11
2012-08-23 by RM BTOW
Casio FZ SamplersGreat stuff! thanks alot I will now pursue a Lotharek floppy unit :0) maybe back for some hlep though ....! R ... From:
Re: [Casio_FZ_Samplers] Re: Hi, anyone got Lotharek's floppy emulator SD working in your FZ-1/10m??
2012-08-22 by Lee Borrell
Hi, I have seen before: http://lotharek.pl/product.php?pid=13 but considered such things out of my price range. My FZ disk is currently working,but I do not
Re: Hi, anyone got Lotharek's floppy emulator SD working in your FZ-1/10m??
2012-08-21 by dir_marillion
Hello, I am new in your group but I have to share this info with you. First of all, I have also a DSS-1 with Lotharek s floppy emulator SD which works great
Re: [Casio_FZ_Samplers] Re: Hi, anyone got Lotharek's floppy emulator SD working in your FZ-1/10m??
2012-06-08 by Lee Borrell
I have not changed a FZ1 floppy - however I have changed a CTK731 floppy after advice from CASIO - turns out a standard floppy will work - if you connect it
Re: Hi, anyone got Lotharek's floppy emulator SD working in your FZ-1/10m??
2012-06-07 by fweakboy
http://torlus.com/floppy/forum/viewtopic.php?f=18&t=408
Re: FZ sample transfer to windows vista
2012-06-03 by velimattirautio
Thank you very much for your advices: )
Re: FZ sample transfer to windows vista
2012-06-02 by J Killah
http://www.vintagesynth.com/forum/viewtopic.php?f=3&t=44276 check the 1st reply to the linked post, gmeredith wrote all you need to know about your casio
Re: [Casio_FZ_Samplers] FZ sample transfer to windows vista
2012-06-02 by jammie
cant use usb floppy disk drives as they dont write images properly also .fzf are dump banks and cant be put onto floppy they need to be dumped to the fz10
FZ sample transfer to windows vista
2012-06-02 by velimattirautio
Hello! Can anyone help me? I got plenty of FZ samples (.fzf), but i cant t transfer these in my usb floppy disk to FZ-10M! FZ s floppy disk dont recognize
Hi, anyone got Lotharek's floppy emulator SD working in your FZ-1/10m??
2012-05-06 by Richard
Link: www.lotharek.pl Would really like to get both my FZ-1 & 10m units upgraded to this mod? - anyone out there got it working and any pitfalls, etc. Cheers!!
Re: [Casio_FZ_Samplers] Re: FZ synthesis - mixing waves
2012-04-30 by Lee Borrell
Can someone explain the cross mix function? I am not sure I actually tried it. Is the idea to alter the sample up and down the keyboard or during an envelope
Re: [Casio_FZ_Samplers] Re: FZ synthesis - mixing waves
2012-04-29 by jammie
you need to make the additive wave into a sample for it to work it wont work with just the synth engine as there is no sample to minipulate you have to turn
Re: FZ synthesis - mixing waves
2012-04-29 by iluvator
hi Jammie and thanks for the quick answer, but I cannot get it to work, when in mix or cross mix function, if either of the two ingredients are preset wave or
Re: [Casio_FZ_Samplers] FZ synthesis - mixing waves
2012-04-28 by jammie
when doing additive waves you are creating samples once they are rendered as samples you can do what you want to do with them with the sampling features of the
FZ synthesis - mixing waves
2012-04-28 by iluvator
hi, as I understand it, you can mix two samples, but you cannot mix a sample with a preset wave or an additive synthesis created wave (I am not talking about
Re: [Casio_FZ_Samplers] New expansion Casio_FZ_Samplers_2 group created....
2012-04-07 by jammie
joined so just awaiting your aproval narfman ... From: narfman96 To: Casio_FZ_Samplers@yahoogroups.com Sent: Saturday, April 07, 2012 1:13 PM Subject:
New expansion Casio_FZ_Samplers_2 group created....
2012-04-07 by narfman96
http://launch.groups.yahoo.com/group/Casio_FZ_Samplers_2/ This is the new expansion group I just created. Jammie said he has a bunch of files and the files
Re: [Casio_FZ_Samplers] Re: kawai k1 spectra
2011-08-30 by jammie.emma@blueyonder.co.uk
yes i will do all the spectra for the fz including the transient samples and also i will do k1 and k4 patches in banks which will be 4 layers ... From: ....
Re: kawai k1 spectra
2011-08-30 by .... ...
Wow cool. I was thinking of doing almost exactly that -- recording the waverom from the k1 and using it in the fz. Will you post all a program with all the
kawai k1 spectra
2011-08-30 by jammie
just been finishing the spectra from this instrument thats all the additve spectra thats 200 single cycle waveforms and 52 cyclic samples which consist of
Re: Sample Library Disk List
2011-08-30 by narfman96
Thanks for the link to the FZ sample descriptions. I added this site to the links page here. I also made a backup text copy of the page in case it disappears.
Sample Library Disk List
2011-08-29 by .... ...
This is fantastic. Thanks so much narfman! If anybody needs to find the list of what is on each disk you can look here:
New group created for Casio FZ Sampler file storage...
2011-08-26 by narfman96
Although I will come very close to filling the files section with all of Casio s freeware samples. If there is enough popularity I will create another group