Re: Missing / skipping kick beats on DTX1 poll results and my soluti
2008-06-30 by Keith
... voicing to tame it! where did you add the 100k pot? do you have a schematic? ... Tom, I have uploaded a drawing to the files section Pintech Pot.gif
Messages
Browse messages
Page 15 of 283 · 14139 messages matched
New file uploaded to DTXpress
2008-06-30 by DTXpress@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the DTXpress group. File : /Pintech
Re: [DTXpress] Re: Missing / skipping kick beats on DTX1 ...pintech
2008-06-29 by Andy Citron
Thanks for the suggestions. I found the velocity curve setting. I had it on loud 2 . Setting it to hard 2 made it almost inaudible. Changing the attenuation
Re: Missing / skipping kick beats on DTX1 poll results and my soluti
2008-06-29 by Tom Watson
Keith Yeah on mine the kick was really really loud I used the volume in voicing to tame it! where did you add the 100k pot? do you have a schematic? Tom Re:
Re: Missing / skipping kick beats on DTX1 poll results and my soluti
2008-06-29 by Tom Watson
Hey Andy I have the DTX1 and used the DTXIII settings! they are all there and work fine. Just push the trigger button(top mid) to get there and then page up
Re: Missing / skipping kick beats on DTX1 poll results and my soluti
2008-06-29 by Keith
Check the attenuation switch on the back of the module - try both positions. Also, I don t know what you have the pad set up as - I just set mine up as a
Re: Missing / skipping kick beats on DTX1 poll results and my soluti
2008-06-29 by Keith
... See page 13 of the reference manual. Under the trigger edit, look for VelCurve=Normal etc I am surprised you have problems with the Pintech Concertcast
Re: [DTXpress] Re: Missing / skipping kick beats on DTX1 poll results and my soluti
2008-06-28 by Andy Citron
Tom, Mick, Thanks for the info. I m using a DTXpress I. So some of the settings are probably different. The Pintech is a concertcast . I use a roland KC 550
Re: Missing / skipping kick beats on DTX1 poll results and my soluti
2008-06-28 by Tom Watson
Hi Andy It sounds like you are relying on the DTXIII to supply the Volume for your kit... You should actually be setting the output from the DTXIII as low as
DTXIII settings for Pintech cymbals and drums
2008-06-28 by Tom Watson
ok... Here is the video on youtube; http://www.youtube.com/watch?v=KQssf7jGVaY Here is my chart of the pintech/yamaha DTXIII settings...You ll have to copy and
Re: Missing / skipping kick beats on DTX1 poll results and my solution
2008-06-28 by micklean1953
Gee, the subject doesn t match the message but hey! This is be a duhhh type question but have you tried lowering the volume on the other parts of the set to
Re: [DTXpress] Missing / skipping kick beats on DTX1 poll results and my solution
2008-06-28 by Andy Citron
I bought a pintech snare and kick drum to go with my dtxpress I system. I bought the kick drum because the one that came with the system died. I bought the
Missing / skipping kick beats on DTX1 poll results and my solution
2008-06-27 by Tom
Hi Ok I closed the poll on this as it seems everyone who was gonna contribute has done so... AND I found a solution that worked... My solution was to replace
Poll results for DTXpress
2008-06-27 by DTXpress@yahoogroups.com
The following DTXpress poll is now closed. Here are the final results: POLL QUESTION: kick pedal dropping beats poll. ---- Hi... Please fill this out even if
Re: Metronome
2008-06-27 by Keith
... I must have been sooo close as well - I set up a pad to be pad song instead of normal while investigating this. One more push of the button and I would
Re: [DTXpress] Re: Metronome
2008-06-27 by DARKMOON
dont be too hard on yourself keith. i was reading the manual too when i was searching for this. and apparently, it was NOT there during the time of my reading.
Re: Metronome
2008-06-26 by Keith
... found it by accident. ... click onoff ... Well b&$$er me - and it s even in the manual (page 21 of the reference manual). And I thought I know what the
Re: [DTXpress] Re: Metronome
2008-06-26 by DARKMOON
Hi Keith, I have discovered something. I wasnt actually looking for this but found it by accident. 1. press the Voice button 2. hit a pad, say for example
Re: [DTXpress] Re: Metronome
2008-06-19 by DARKMOON
Hi Keith, Thanks for spending some time and effort on this. Really appreciate your help and feedback. :-) Cheers!! ... From: Keith
Re: [DTXpress] Re: Metronome
2008-06-14 by Keith Raper
I had the same problem! I bought a Grey beat monitor so I could show him I was playing at the right speed - that shut him up & slowed him down. Keith.
Re: [DTXpress] Re: Metronome
2008-06-14 by Perry Norsworthy
Thanks Keith, Actually I think the problem, as usual, is the lead guitar player. Too slow! Too fast! I told him to f..k off and just play my my speed. Seems
Re: Metronome
2008-06-14 by Keith
I tried my idea of using a blank song, but it doesn t work. The DTXpress won t let you have a blank song. Also, starting a song with a pad doesn t start the
Re: Metronome
2008-06-13 by Keith
... start when i want it to and stop it without pressing the click button? i mean like using one of my pads for example to trigger the click to start? ...
Re: [DTXpress] Re: Metronome
2008-06-12 by DARKMOON
Hi Keith, how are you? talking about click, is there a way that i can let it start when i want it to and stop it without pressing the click button? i mean like
New poll for DTXpress
2008-06-11 by DTXpress@yahoogroups.com
Enter your vote today! A new poll has been created for the DTXpress group: kick pedal dropping beats poll. Hi... Please fill this out even if you never had a
Re: Metronome
2008-06-09 by Keith
... Perry, Sort of. Have a look at page 20 of the owners manual - click out select . This allows you to send the click to one stereo channel & the drums to
Metronome
2008-06-09 by Perry Norsworthy
I have a Dtxpress IV. Is there a way to use the metronome click and only hear it through my headphones and not have it go through to the band PA system? Perry
Re: Invitation to "Musician Swap Meet" a Yahoo Group
2008-05-20 by Keith
http://launch.groups.yahoo.com/group/musicianswapmeet/
Invitation to "Musician Swap Meet" a Yahoo Group
2008-05-20 by Antonio Morejon
All members of DTXpress are invited to join Musician Swap Meet a Yahoo group where members can buy, sell or trade musical instruments and equipment. Tony
Re: it's being long
2008-05-17 by Keith
... Thanks, that s useful to know. I haven t got a drum tutor at the moment and something like that sounds useful for me. It is interesting what you say
Re: it's being long
2008-05-17 by Nick Carroll
Yes I splashed out on Jack Bennett s UDS2007 DVD set, and the discs are crammed with lessons. Stuff I only half-learnt when I took up drumming years ago (a
RE: [DTXpress] computer drum software only triggering piano sounds on dtxpress iii?
2008-05-16 by Jonathan Wilkinson
You might want to change the midi channel to 10. To: DTXpress@yahoogroups.comFrom: lamontgrady@gmail.comDate: Fri, 16 May 2008 13:26:30 +0000Subject:
computer drum software only triggering piano sounds on dtxpress iii?
2008-05-16 by tim_verry
I use Tracktion 3 and a VST plugin called Jamstix which sends drum data out via midi. The problem is that the dtxpress iii module only produces piano sounds in
Re: [DTXpress] two iii brains questions
2008-05-14 by David Scarponi
Tim Looks like you ll be learning a lot about midi going forward. If you midi one brain (B) into another (A), B is normally just going to play the same sounds
Re: two iii brains questions
2008-05-14 by Keith
... I am afraid I cannot help you with the midi stuff, but if you have two DTXpress modules and want them to make different sounds you need to select different
two iii brains questions
2008-05-13 by tim_verry
I got a dtxpress iii kit rather than trying to upgrade that dd502 kit. And happened to snag a second iii brain cheap. And happened to accidently acquire a
Re:upgrading DD502
2008-05-09 by tim_verry
I got the DTXpress III brain. The Yoki pads worked fine with it. As was mentioned before though the hihat pedal is just an on/off switch so it won t work.
Re: Problem with DTXpress I
2008-05-07 by Keith
... Well, take it apart & see if the foam is compressed (it can be changed) or any loose connections. Someone posted this in relation to the KP60: My kick,
Problem with DTXpress I
2008-05-07 by zildjian6543
Has anyone ever found a solution to fix the kp60 problem or should i just buy a new one. lol Thanks
Re:upgrading DD502
2008-04-29 by tim_verry
I was trying to talk myself into going for the IV but it doesn t have midi input!! That was the main reason for wanting to upgrade the DD502 to begin with.
RE: [DTXpress] Re: it's being long
2008-04-28 by Jonathan Wilkinson
Cheaper than I can get lessons for* To: dtxpress@yahoogroups.comFrom: bthreadbare@hotmail.comDate: Mon, 28 Apr 2008 07:34:24 +0000Subject: RE: [DTXpress] Re:
RE: [DTXpress] Re: it's being long
2008-04-28 by Jonathan Wilkinson
They look awesome, the DVDs I mean... for about £90 - that s a lot of lessons, and cheaper than I can get (although there s obviously no interactive feedback)
Re: it's being long
2008-04-27 by Nick Carroll
Here is a site containing 87 free basic drumming lessons, covering the gamut of styles: http://www.icanplaydrums.com/members.htm I can thoroughly recommend it.
Re:upgrading DD502
2008-04-24 by Tom Watson
Hi Tim That was the way I went with the same kit (dd502) When the kit took a flying leap out of the truck and fell on his brain, I went on ebay and got a dtx-I
Re: upgrading DD502
2008-04-24 by Keith
Well, I m lazy so I would just ditch the kit and buy a new one. It would save all sorts of possible compatibility issues with pads/module. I learnt on a
upgrading DD502
2008-04-23 by tim_verry
Hi folks, I m a guitar player trying to learn some drums for home recording and getting more out of my drum software. I also want as good of a kit as I can
Re: [DTXpress] To Apologize And Clear Things Up....
2008-04-21 by Cat Lake | www.catlake.net
... It s very good of you to post an apology. Here s to a less hectic and embarassing year ahead for your project. :-) Keith is a great guy and extremely
Re: To Apologize And Clear Things Up....
2008-04-21 by Keith
Adam, Apology accepted. Just so you know, I am happy to offer advice and help on edrums of any sort. I design electronics for a living and have designed
To Apologize And Clear Things Up....
2008-04-20 by affordablemusicalendeavors
Keith, the most important thing is that you get this message. Since the topic regarding this has been removed from the forum (as it should have been) I assume
Re: [DTXpress] Re: Really Cheap Electronic Drum Set....?
2008-04-20 by opelmyster
you finally caught that huh? LOL! Keith wrote: I have removed the rest of this thread as it is now obvious it is