Yahoo Groups archive
Messages
Page 155 of 564 · 28179 messages matched
2010-02-11 by achtung_999
Nice compromise. ;-) On Thu, Feb 11, 2010 at 2:06 PM, Bakis Sirros wrote: > > > ok, agree. > > let's all follow that guideline from now on. > > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > > [Doepfer_a100] group owner > > www. parallel - worlds - music. com
2010-02-11 by Bakis Sirros
ok, agree. let's all follow that guideline from now on. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ m
2010-02-11 by infrequent
Ok, no separate list. The [FS]/[FT] prefix would seem to work best as it's east to filter on. I'd also like to suggest that the subject line have EU or US in it somewhere. I always look at the EU postings but generally ignore the US ones (because of customs and such).
2010-02-11 by achtung_999
I changed the IC on some of mine actually. It does not matter that much. The sound gets a bit less 'grey'. But to be honest, I have 4 A119, I would have to look on which one I changed the ICs. And indeed, what Florian says is true, most standard line signals are enough to drive t
2010-02-11 by achtung_999
That is indeed what I was hinting at earlier.. Great idea! On Thu, Feb 11, 2010 at 8:34 AM, phono 1337 wrote: > > > all we need is a policy to name for sale threads the same then we can > just use filters to move or delete them, not a big deal if everyone > selling uses the same
2010-02-11 by Florian Anwander
Hi Rich > I am taking the audio output from my Korg Radias. I don't own a Korg Radias, but in general the line out of a standard synth should send enough signal power to go direct to any input of the A100. Florian
2010-02-11 by richyho@btopenworld.com
OK, thanks for that Florian - I will try tonight. Rich --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hi Rich > > > I am taking the audio output from my Korg Radias. > I don't own a Korg Radias, but in general the line out of a standard > synth should send enoug
2010-02-11 by richyho@btopenworld.com
I'll try taking it into my 138 or 132-3 but I think the level will be too low. I am taking the audio output from my Korg Radias. I have tried both the line out on the back of the Korg and also the amplified headphone output from the front. I read on Muffs that you can upgrade the
2010-02-11 by Florian Anwander
Hello Rich did you ever try to feed your external audio signal directly to a standard module like e.g. A130 VCA or A138 Mixer? How does the A100 signal compare to the original signal there? The A138 should be the best possible signal an A100 can produce with your audio. The A130
2010-02-11 by richyho@btopenworld.com
I tried both last night with various audio levels. The inputs do both sound different, but neither sounds like the audio that's going into it. Distortion or loss of top end appears to be the choice. I'm interested in whether the A-183-3 might do a better job at amplification. Has
2010-02-11 by phono 1337
all we need is a policy to name for sale threads the same then we can just use filters to move or delete them, not a big deal if everyone selling uses the same naming convention Paul On Tue, Feb 9, 2010 at 3:19 PM, achtung_999 wrote: > But then you already have an excellent way o
2010-02-11 by achtung_999
Oh and from the manual: . Asym. In The 3.5 mm mono mini-jack socket ! is the A-119's unbalanced input, designed predominantly for line level external audio signals and/or audio generated within the A-100 system. " Symm. In The 6.3 mm stereo full-size jack socket " is the A-119's
2010-02-11 by achtung_999
Well the full size jack input is way more sensitive than the minijack input. In my system I have 4 A119s and I tend to always use the minjack input because it is less prone to distortion. Rather have it unbalanced and non-distorted than balanced and overloading. On Wed, Feb 10, 2
2010-02-10 by Jonas Asher
can you elaborate on the difference between the 2 inputs? On Wed, Feb 10, 2010 at 12:24 PM, achtung_999 wrote: > Have you tried both inputs on the A119? The sensitivity of the inputs is > different. > > > > > > On Wed, Feb 10, 2010 at 3:41 PM, richyho@btopenworld.com richyho@btop
2010-02-10 by achtung_999
Have you tried both inputs on the A119? The sensitivity of the inputs is different. On Wed, Feb 10, 2010 at 3:41 PM, richyho@btopenworld.com wrote: > > > Hi > > I want to get the line-level audio out from my Korg Radias and into my > Doepfer modular. I have an A-119 but am disapp
2010-02-10 by cuari7
Hi, group!! Dejavu all over again... Need to pay Unkie Sam, what with the health reforms and bail-outs he's really in need!! Stuff I'm selling: -SQP sequencer. I don't think this guy has seen a whole one hour's worth of use in my studio, so it is practically new. Comes with its p
2010-02-10 by richyho@btopenworld.com
Hi I want to get the line-level audio out from my Korg Radias and into my Doepfer modular. I have an A-119 but am disappointed with the audio quality of this module - particularly the loss of high frequencies (it is great for the gate extraction and env. following though). Will t
2010-02-10 by Bakis Sirros
important update: after a very helpful advice, i just saw that the 'end pulse out' also works fine! so the 182 is fully functional!! (the 'end pulse out' is made to Only work in 'single' mode! i did not know that...) so, this is your chance to buy a fine condition 182 module for
2010-02-10 by yahoo@doepfer.de
> > Hi, > > > > I hope the manual will be released soon. > > Would like to know what this module does exactly and what the > > specs are (24 Bit, 44,1 KHz?). > > > > Joachim > > The DSP board data sheet says 24 bit/48 kHz. We are about to update the > A-187-1 info page as Christi
2010-02-10 by Bakis Sirros
hello, for sale: in Fine cosmetic and working condition (only the 'end pulse output' does not seem to work): Roland 100m 182 Sequencer module (rare) for 690 euros, plus 3% paypal, plus 10 euros shipping worldwide. it comes with (non-original) screws and (non-original) Din power c
2010-02-10 by phono 1337
thanks for the tips, itll give me something to get my teeth into :-) Paul On Wed, Feb 10, 2010 at 10:24 AM, wrote: > > > > Thanks for the reply, yes i did look at the 132-3 but i simplt dont have > the > > rack space, i need to add 4 vcas. Changing the parts is no problem (i do >
2010-02-10 by yahoo@doepfer.de
> Hi, > > I hope the manual will be released soon. > Would like to know what this module does exactly and what the > specs are (24 Bit, 44,1 KHz?). > > Joachim The DSP board data sheet says 24 bit/48 kHz. We are about to update the A-187-1 info page as Christian added also some m
2010-02-10 by yahoo@doepfer.de
> Strange. Seems such a good idea even with only two A-180. I have > to say, that despite often visiting Doepfer site, I never noticed > the Specials section. I mentioned in a message dated 07/10/2008 that I have ordered a special U-shaped metal part that could be used instead of
2010-02-10 by yahoo@doepfer.de
> Thanks for the reply, yes i did look at the 132-3 but i simplt dont have the > rack space, i need to add 4 vcas. Changing the parts is no problem (i do > this all day at work) Are you able to let me know a parts list and which > need to be changed. > > Paul You do not simply ha
2010-02-09 by Joachim
Hi, I hope the manual will be released soon. Would like to know what this module does exactly and what the specs are (24 Bit, 44,1 KHz?). Joachim Am 06.02.2010 um 02:24 schrieb Oliver Gretz: > Hi, > > I've just seen that the A-187-1 Voltage Controlled DSP Effects is > available r
2010-02-09 by jalmari3
Strange. Seems such a good idea even with only two A-180. I have to say, that despite often visiting Doepfer site, I never noticed the Specials section. I may go for the A-100P9, but my ideal portable case might be something like 3 X 112HP. --- In Doepfer_a100@yahoogroups.com, wr
2010-02-09 by phono 1337
Thanks for the reply, yes i did look at the 132-3 but i simplt dont have the rack space, i need to add 4 vcas. Changing the parts is no problem (i do this all day at work) Are you able to let me know a parts list and which need to be changed. Paul On Tue, Feb 9, 2010 at 6:21 PM,
2010-02-09 by yahoo@doepfer.de
> Rack space is an issue atm and i need both lin and log vcas, so im > looking at a little shopping. Since the quad vca was put back to > summer ive started to look at the A-132-1 was wondering if it was > possible to modify it? > > regards > > Paul Depends upon the perception of
2010-02-09 by phono 1337
Rack space is an issue atm and i need both lin and log vcas, so im looking at a little shopping. Since the quad vca was put back to summer ive started to look at the A-132-1 was wondering if it was possible to modify it? regards Paul
2010-02-09 by achtung_999
But then you already have an excellent way of filtering! On Tue, Feb 9, 2010 at 10:27 AM, Robbert Jan Rink wrote: > > > When I see FS or FT in the title I instantly press delete. It would be nice > if these posts are on a different site. If I want to buy something I can > decide
2010-02-09 by Robbert Jan Rink
When I see FS or FT in the title I instantly press delete. It would be nice if these posts are on a different site. If I want to buy something I can decide to receive those mails. At this moment I'm allmost at the point to stop having all the posts mailed to me and effectively st
2010-02-09 by yahoo@doepfer.de
> Thank you. > > Are there plans to introduce A-100P9 with built in multipliers in > the empty spaces? Those empty spaces look rather large to me. Is > there a technical reason for this? We showed an A-100P6 with multiples in the empty space at the Musikmesse 2009 but the inquiri
2010-02-08 by achtung_999
I already have way too many lists to follow. Why make an extra one? It is nice to have all things A100 related in one place. On Mon, Feb 8, 2010 at 6:41 PM, Bakis Sirros wrote: > > > agree with Nick. > > just send your replies direct to the seller! > > > Bakis Sirros - Parallel W
2010-02-08 by Greg Cerveny
p.s. thanks for the help in working it out! :) On Mon, Feb 8, 2010 at 12:52 PM, Bakis Sirros wrote: > > > good. > > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > [Doepfer_a100] group owner > www. parallel - worlds - music. com > www. myspace. com/ parallelwor
2010-02-08 by jalmari3
Thank you. Are there plans to introduce A-100P9 with built in multipliers in the empty spaces? Those empty spaces look rather large to me. Is there a technical reason for this?
2010-02-08 by Bakis Sirros
good. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www. musicamaximamagn
2010-02-08 by Greg Cerveny
The orb defaults to a 12v trigger. I need see if I can adjust it. Oy... I'm an idiot. When trying out other envelopes, I realized that it was the cv attenuator that was the problem. I gave it 100 rotates and now it's working. On Mon, Feb 8, 2010 at 10:55 AM, Bakis Sirros wrote: >
2010-02-08 by Bakis Sirros
or, maybe, you sent too many volts into the trigger input of the 142... and the decay envelope has a problem now...? does the top vca of the 132-3 work fine with other cv sources, apart from the 142? the 132-3 vca's accept up to +/- 8 volts without distortion, in the audio input,
2010-02-08 by Bakis Sirros
agree with Nick. just send your replies direct to the seller! Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace.
2010-02-08 by Greg Cerveny
Hello all, I had my orb sequencer gating @ + 12v into an a142 into an a132-3. Now the top vca is not responding consistently to cv signals. The gain works fine. The bottom vca works fine. I see the 132-2 accepts -8 to +8. Did I put too much voltage into it?
2010-02-08 by phono 1337
Just got a bunch in the mail and while they all work, it seems the little elves that put the cable ties on, tied them a little too tight and theres quite some marks on them. This seems to be worse with the 50cm (grey) ones This isn't a complaint as such just a heads up, whoever i
2010-02-08 by infrequent
Hi, There are quite a lot of selling posts on the list these days. It's obviously a good place to sell modules, but I can't help but feel that an entirely separate list would be better both for the list and buyers and sellers alike. For one thing, it would allow people to post as
2010-02-08 by Nick
I would prefer to have them all in one place. So long as the replies are made direct to the seller, keep posting the selling pitches here. Cheers, Nick --- In Doepfer_a100@yahoogroups.com, infrequent wrote: > > Hi, > > There are quite a lot of selling posts on the list these days
2010-02-08 by Alex Pearson
Best news in a while!!! On Mon, Feb 8, 2010 at 11:31 AM, achtung_999 wrote: > > > Great going Dieter! > > > On Mon, Feb 8, 2010 at 4:27 PM, Eyesaw > > wrote: > > > Very nice execution - settin' aside hp's for this unit, > > > > Bill > > > > www.doepfer.de/a1424.htm > > > > > > >
2010-02-08 by achtung_999
Great going Dieter! On Mon, Feb 8, 2010 at 4:27 PM, Eyesaw wrote: > Very nice execution - settin' aside hp's for this unit, > > Bill > > www.doepfer.de/a1424.htm > > > > --- > avast! Antivirus: Outbound message clean. > Virus Database (VPS): 100208-1, 02/08/2010 > Tested on: 2/8/
2010-02-08 by Eyesaw
Very nice execution - settin' aside hp's for this unit, Bill www.doepfer.de/a1424.htm --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 100208-1, 02/08/2010 Tested on: 2/8/2010 10:27:51 AM avast! - copyright (c) 1988-2010 ALWIL Software. http://www.avast.com
2010-02-08 by yahoo@doepfer.de
> Hello > > I have a wish for a new super simply module: > > A quad decay envelope. Like the A142, but no voltage control, no gate > out; simply four normalled trigger ins, four decaytime potentiometers, > four envelope outputs. For my kind of stupid sequencer based dancefloor >
2010-02-08 by achtung_999
I have a A-100P6 Suitcase with mains inlet at the back. Which I use 'horizontal' in live concert situations. I bought a mains connector that is angled (at the mains inlet of the doepfer) and use a roll of gaffer tape under the case to slightly tilt it upward. This way it plays ni
2010-02-08 by yahoo@doepfer.de
> Is there A-100P9 9U Suitcase with mains inlet at the front? Only as a custom-made product with additional charges and ~4-6 weeks delivery time (the pre-manufactured wire harness cannot be used in this case and the mains inlet has to be wired manually with the power supply). Bes
2010-02-08 by Richard Scott
Hi the frequensteiner and A-137 are gone. Final price drop on the other modules. thanks Richard > Harvestman Malgorithm 175 euro > Analogue systems RS-350 VC slew limiter 70 euro > Analogue system RS20 ringmod and multiple (showing a bit of Paintwear so > 70% of AS price = 64 eur