Yahoo Groups archive
Messages
Page 153 of 564 · 28179 messages matched
2010-02-21 by Bakis Sirros
but the reset input means Sync capabilites for the 4 vco's... Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace.
2010-02-21 by liamcloyd
put me down for not caring about the reset switch! certainly plenty of other things that can be reset. i am just interested in four simple vclfo/vco's which can take a normalized 1v/o and play together with a single out from the sum. that is perfect as is! 1 cable i for control a
2010-02-20 by infrequent
Hi, The wobblebug and vcs are sold. Thanks to all who expressed interest. The vc-eq3 and a106-1 are still available. rgds Pierre On Fri, Feb 19, 2010 at 8:10 PM, infrequent wrote: > Hi, > > I have the following modules for sale: > - cwejman vceq3: £290 > - makenoise wobblebug: £1
2010-02-20 by yahoo@doepfer.de
> this module looks SOOOOOOOOOO awesome. i want to buy it yesterday! > when will is it coming out? > > anxiously awaiting.... It will probably still take a few months ... Actually the module was ready end of 2009. But then a lot of customers mentioned that some modifications woul
2010-02-20 by achtung_999
It is stated on the Doepfer site.. early summer 2010. On Sat, Feb 20, 2010 at 10:02 AM, liamcloyd wrote: > > > this module looks SOOOOOOOOOO awesome. i want to buy it yesterday! > when will is it coming out? > > anxiously awaiting.... > > > [Non-text portions of this message have
2010-02-20 by Bakis Sirros
all Sold, thanks, Bakis Sirros > --- On Fri, 2/19/10, Bakis Sirros > wrote: > > > From: Bakis Sirros > > Subject: [FS] Livewire Dual Cyclotron, Flame Clockwork > euro, Doepfer A155 Sequencer. > > To: "Doepfer_a100 group" , > "Livewire group" , > "Analogue Systems group" > > Date:
2010-02-20 by liamcloyd
this module looks SOOOOOOOOOO awesome. i want to buy it yesterday! when will is it coming out? anxiously awaiting....
2010-02-20 by daad_noise
What are they for???
2010-02-19 by infrequent
Hi, I have the following modules for sale: - cwejman vceq3: £290 - makenoise wobblebug: £140 - bananalogue vcs (original version): £120 - doepfer a106-1 xtreme filter: £70 That 70% of average internet prices. I'll offer a further small discount for multiple modules £8 per module
2010-02-19 by Bakis Sirros
Dual Cyclotron sold. the other two still available! Bakis Sirros --- On Fri, 2/19/10, Bakis Sirros wrote: > From: Bakis Sirros > Subject: [FS] Livewire Dual Cyclotron, Flame Clockwork euro, Doepfer A155 Sequencer. > To: "Doepfer_a100 group" , "Livewire group" , "Analogue Systems
2010-02-19 by Bakis Sirros
hi lists, for sale, in fine condition (with screws and ribbon cable): Livewire Dual Cyclotron (Rare module): price: 300 USD. Flame Clockwork euro module: price 75% of new price: 299 USD Doepfer A155 sequencer: price 75% of new: 281 USD please, add 2,2% paypal fees (that's splitin
2010-02-19 by andre goncalves
Hello all, so arduino meets 16bit 8 channel CV output (this are NOT PWM outputs!) I've been building this modular system for digital generation of complex waves based on math equations, this is also meant to be a platform to integrate the analog world to a computer for higher res
2010-02-19 by Nick
--- In Doepfer_a100@yahoogroups.com, Monroe Eskew wrote: Unfortunately Dieter cannot make a module that does all and only prime divisions, since then he would create a small machine that would solve many hard math problems faster than our fastest supercomputers. ...or maybe he ca
2010-02-19 by Monroe Eskew
This is probably old news to some of you, but I was just reading about the Korg PS-3100 analog synth and it is interesting how they did the polyphony. They just had twelve fixed oscillators, one for each note on the scale, and then frequency dividers to go down in octaves. Then e
2010-02-19 by Monroe Eskew
Every number has a unique decomposition as a product of primes. So if the dividers that do only prime divisions, then you can get the composite divisions by daisy-chaining several together. (i.e. to get a 6 division daisy-chain 2 with 3). Because of this property a primes-only mo
2010-02-18 by achtung_999
Good to hear about the USB unit redesign. I was about to ask if it could be mounted upside down.. ;-) Whenever it's available I'm in! On Thu, Feb 18, 2010 at 7:49 PM, wrote: > Thanks! The USB lamp/patch cord checker module is under re-design now so > will be delayed a little. Som
2010-02-18 by james.husted@mac.com
Thanks! The USB lamp/patch cord checker module is under re-design now so will be delayed a little. Someone on another forum noted that it could be laid out ergonomically better - the current design has the patch cord checker above the USB socket so you run into the lamp when you
2010-02-18 by Mark Pulver
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170448052048 Please email me directly with any questions. Thanks for looking! Mark
2010-02-18 by Bakis Sirros
even lower price, 63% of new price: 72.4 USD Bakis. > --- On Sun, 2/14/10, Bakis Sirros > wrote: > > > From: Bakis Sirros > > Subject: [FS] A122 VCF 3 low pass II filter module > (price 70% of new) > > To: "Doepfer_a100 group" > > Date: Sunday, February 14, 2010, 9:36 PM > > hi l
2010-02-18 by Bakis Sirros
indeed, very nice modules James! the usb lamp is indeed nice and useful for live situations too. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/
2010-02-18 by achtung_999
You have some nice modules there James. I just love the concept of that USB lamp module! On Wed, Feb 17, 2010 at 6:32 PM, wrote: > WARNING - SHAMELESS PLUG AHEAD > > http://www.aes.org/sections/pnw/ > > Talks and Demos by: > > � George Mattson, Mattson Modular www.mattsonminimodu
2010-02-17 by james.husted@mac.com
WARNING - SHAMELESS PLUG AHEAD http://www.aes.org/sections/pnw/ Talks and Demos by: � George Mattson, Mattson Modular www.mattsonminimodular.com � James Husted, Synthwerks www.synthwerks.com � Kevin O'Neill, Flight Of Harmony www.flightofharmony.com � Scott Rise, Division 6 www.d
2010-02-17 by k.kdms
Thanks for the reply. Well, no i didn't misunderstood, just interpreted the red highlighted tex on the product pages, thats all. If you say so that you will be able to repair boards nice,fine, i assume that will be some kind of charge for doing so.. Anyhow there will be a balance
2010-02-17 by yahoo@doepfer.de
> Hi! > I'm interested in the upcoming SDIY synth board but i wonder since there are > no support for it and if it fails later on, can i repair it myself? What components > do it use, can i find these on the open market, are they expensive like special > or difficult to find? I'm
2010-02-17 by Guy
I haven't had a board in my hands yet, so my guess is as good as yours. Still, I'm quite sure Doepfer did not use any rare and/or expensive parts, given the end-user price of the board, and the fact that any forward thinking manufacturer would be wise enough not to do so unless h
2010-02-17 by k kdms
Hi! I'm interested in the upcoming SDIY synth board but i wonder since there are no support for it and if it fails later on, can i repair it myself? What components do it use, can i find these on the open market, are they expensive like special or difficult to find? I'm thinking
2010-02-17 by Bakis Sirros
ok, thanks for the explanation Nick. anyway, the a160-2 will be able to offer some prime number divisions. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. mys
2010-02-17 by Nick
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > prime divisions? > please, refresh my maths a bit... > hi Bakis Sorry to drag the conversation back to this, but you did ask. The reason this idea came to mind was a recent piece in The Times referring to a lecture by M
2010-02-17 by yahoo@doepfer.de
> Dieter, would an 8HP panel cost much more than a 4HP one? Yes, but not twice as much because the silk screen charges are nearly the same for 4 and 8 HP panels. But the material and milling/stamping charges are twice as much. Altogether I think an 8 HP panel would about 50% more
2010-02-16 by spiralsect
I'd be interested in this but only if the sockets were sensibly spaced (The 4ms RCD sockets are way too close together in my opinion which is a shame as it's a very cool module). I know everybody wants modules to as small as possible but I think this one could benefit from being
2010-02-16 by Bakis Sirros
yes, ok, you are right about this. but, who would want Only the a160-2 in his modular (especially if it does Only odd divisions)? most users would want the a160 and a160-2 in their systems. (unless the a160-2 will be manufactured to make both even and odd divisions...) so, i gues
2010-02-16 by achtung_999
> i do not see any major benefit from this feature... > > Well that you could choose to use the A161 in combination with either the A160 or the A160-2. Meaning that that people would not be obliged to buy the A160 if they only want the A160-2 and the A161. That could be a selling
2010-02-16 by Bakis Sirros
what would be the benefit of this connection other than saving two patchcables (meaning the normaling of clocks and resets inputs of a160 and 160-2)? i do not see any major benefit from this feature... Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100]
2010-02-16 by achtung_999
I was waiting for this to pop up when I put out the proposition.. I personally think that it would be fun if it could hook up to the A161 like the original A160. Although it would, for me at least, not be a great thing if it would be omitted... On Tue, Feb 16, 2010 at 3:41 PM, wr
2010-02-16 by david.salter@thomsonreuters.com
A good question Gothicpunk. Do I need a second 161 to go with the proposed 160-2 or can I daisy chain off my existing 161 and have the even divisions on the 160 and odd on 160-2? David * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Seni
2010-02-16 by Ritchie
Hello, I've been into modular about a year now, starting with a Synthesizers.com system. Now I'm adding MOTM & Eurorack into the madness. 1-A-110 Standard VCO, 1-a-128 fixed filter bank, 1-MFB(hihat), 1-A-140 ADSR, a Harvestman POLIVOKS filter and 1-Metasonix VCA are in So Far...
2010-02-16 by gothicpunk82
Howdy, I've been lurking around for a while and decided to partake in the discussion. This is something I was wondering about the proposed A-160-2. If this is made, will it work like a 160/161 combo? So like a 160-2/161 combo? I currently do not have the 160/161, however, plan on
2010-02-16 by yahoo@doepfer.de
> A very quick sketch shows it's possible, although you might run > into panel-estate problems with three two-digit numbers: > > http://www.guyd2.com/stuff/doepfer_div.jpg > > The sketch also shows that you save (shave) some points by using > a straight bar instead of a backslash
2010-02-16 by david.salter@thomsonreuters.com
That's great Guy, although I was hoping for a bit more variety in the outputs ;o) David * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant SSG UKI Thomson Reuters O +44 (0)20 7542 2402X 52402 M 07990562402 david.salter@tho
2010-02-16 by Robbert Jan Rink
And what about Fibonacci? 1, 2, 3, 5, 8, 13, 21 etc Robbert On Tue, Feb 16, 2010 at 11:16 AM, wrote: > > > Three way panel selector would be very cool. > > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > * * * > David Salter > Senior Consultant > SSG
2010-02-16 by yahoo@doepfer.de
> If you'd opt for a three-position switch, then you could easily > label the divisions next to the output jacks in three columns, like so: > > 2/3/3 > 3/5/5 > 4/6/7 > etc... > > ...or similar. Take a look at the A-160 front panel. There is not much space left for the printing -
2010-02-16 by david.salter@thomsonreuters.com
Three way panel selector would be very cool. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant SSG UKI Thomson Reuters O +44 (0)20 7542 2402X 52402 M 07990562402 david.salter@thomsonreuters.com thomsonreuters.com P Please
2010-02-16 by Guy
A very quick sketch shows it's possible, although you might run into panel-estate problems with three two-digit numbers: http://www.guyd2.com/stuff/doepfer_div.jpg The sketch also shows that you save (shave) some points by using a straight bar instead of a backslash. _g --- In Do
2010-02-16 by yahoo@doepfer.de
> We could develop a version with different sets of dividing factors, e.g. > linear 2/3/4/5/6..., 3/5/6/7/9/10 (only the factors not available > at A-160), > 3/5/7/9/11... (only odd factors), 3/5/7/11/13... (only prime > numbers) and so > on. The set could be chosen e.g. by inter
2010-02-16 by yahoo@doepfer.de
> I'll definitely take one with all odds, but what would be really > good is a divider which just does prime numbers. A160-3, or is it just me? > > Cheers, Nick We could develop a version with different sets of dividing factors, e.g. linear 2/3/4/5/6..., 3/5/6/7/9/10 (only the fa
2010-02-16 by Bakis Sirros
prime divisions? please, refresh my maths a bit... :-) Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ me
2010-02-16 by Guy
If you'd opt for a three-position switch, then you could easily label the divisions next to the output jacks in three columns, like so: 2/3/3 3/5/5 4/6/7 etc... ...or similar. Or, you could include some logical OR and AND gates, and let the user do any division themself. :-) _g -
2010-02-16 by Nick
I'll definitely take one with all odds, but what would be really good is a divider which just does prime numbers. A160-3, or is it just me? Cheers, Nick
2010-02-15 by achtung_999
Vote please!! On Mon, Feb 15, 2010 at 8:55 PM, Bakis Sirros wrote: > > > hi list, > > ok, a New Poll has been created about the A160-2 Odd divisions Clock > Divider module. > > Please, Vote for this poll, as it will stay open for one month only. > (i expect to see at least 100 vo
2010-02-15 by Bakis Sirros
New lower price 67% of new price: 77 usd. Bakis Sirros --- On Sun, 2/14/10, Bakis Sirros wrote: > From: Bakis Sirros > Subject: [FS] A122 VCF 3 low pass II filter module (price 70% of new) > To: "Doepfer_a100 group" > Date: Sunday, February 14, 2010, 9:36 PM > hi list, > > for sa