Yahoo Groups archive
Messages
Page 174 of 564 · 28179 messages matched
2009-09-15 by peteruertz
DOEPFER: 1x Filter A-108 VCF 6/12/24/48 dB Low Pass / Band Pass: Neu: 150,- euro http://www.doepfer.de/a108.htm für 100,- 1x A-148 DUAL S&H: Neu: 55,- euro http://www.doepfer.de/a148.htm für 35,- 1x A-118 Noise/ Rand. Voltage: Neu: 60,- euro http://www.doepfer.de/a118.htm für 40,
2009-09-15 by John V. Talbert
Hi folks! I've got a few modules to sell and I thought I'd post them here first before listing them on eBay. Malekko: Boogie Filter: $150 Doepfer: A-131 Exp VCA: $60 Doepfer: A-185 Bus Access (Red LED): $40 Doepfer: A-185 Bus Access (Blue LED): $40 Doepfer: A-106-5 SEM Filter: $7
2009-09-14 by c6r6u6s6a6d6e6r
Thank you Ingo. You're defenitely right about the need of 2x 106. I hadn't noticed that there's a 2nd cutoff and peak/reso for the HP on the original. You're a great help...thanks again. --- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote: > > > > Thanks Ingo especially fo
2009-09-14 by selfoscillate
> Thanks Ingo especially for the tip regarding the A170. > Do I need 2 of the xtreme filter? I thought that the module contains > a LP and HP in one? i'm afraid that you really need two xtreme filters to replicate the filter section of the ms20. the ms20 has independent filters f
2009-09-14 by Eyesaw
Ya might want to check out analogue solutions clone SY-02 for HP & LP vcf's in one module - very close to original MS-20 - Good Luck - Bill --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 090913-0, 09/13/2009 Tested on: 9/14/2009 9:53:51 AM avast! - copyright
2009-09-14 by c6r6u6s6a6d6e6r
Thanks Ingo especially for the tip regarding the A170. Do I need 2 of the xtreme filter? I thought that the module contains a LP and HP in one? Is there a way to shift/to offset a voltage in positive range or negative range only? I'm thinking to have (i.e. LFO/ADSR) a positive ra
2009-09-14 by yahoo@doepfer.de
> Hi > I'm having some strange trouble here. I did remove the jumpers on > back of the A-190,2 before I installed it on the main board, but > it won't work. Both of them, a-190 and 190-2, flashes red > constantly on the gate signal and is not responding to pitch or > anything....
2009-09-14 by davevosh@aol.com
Get large cases (eg LC9) and keep back at least 1k until you have spent some time playing with it. andreas, i`d agree with nick here on both counts - an lc9 or g9 case, while brutally expensive, leaves you with easy growth possibilities. the other side of the coin would be to sta
2009-09-13 by andreashaun2000
--- In Doepfer_a100@yahoogroups.com, "nick_blackburn" wrote: > > Hi Andreas > > This is a good start: > > http://www.soundonsound.com/sos/apr09/articles/goingmodular.htm > > Get large cases (eg LC9) and keep back at least 1k until you have spent some time playing with it. > > Nic
2009-09-13 by selfoscillate
hello, you'd also need: another xtreme filter (you need two to replicate the ms20) another vca (for example the lowcost dual vca) a slew limiter for portamento (if you take the a170 maybe you can omit one adsr envelope, as the lower half of the a170 can be used as a simple envelo
2009-09-13 by nick_blackburn
Hi Andreas This is a good start: http://www.soundonsound.com/sos/apr09/articles/goingmodular.htm Get large cases (eg LC9) and keep back at least 1k until you have spent some time playing with it. Nick --- In Doepfer_a100@yahoogroups.com, "andreashaun2000" wrote: > > hi folks, > >
2009-09-13 by andreashaun2000
hi folks, hello to everybody, i'm new here. i'm going to spend 3-4k euros for a doepfer system but i'm not sure for wich modules i'll spend the money. i'm trying eurorack.com but i end up with all modules ;-)) is there a thread or a discussion going on where i can look for an opt
2009-09-13 by Bakis Sirros
Parallel Worlds are playing live at Reworks 09 festival (www.reworks.gr). Parallel Worlds will present (alternate versions of) tracks from their new album 'Shade' (DiN32), plus older tracks and unreleased material, combined with the otherworldly live visuals of Maria Tsiligiridi.
2009-09-12 by c6r6u6s6a6d6e6r
Hello, which A100 modules do I need to have the functionality of a (Korg) MS-20? Sorry for this question ;-) A basic thought would be (referring the MS-20 front panel): 2x VCO 1x VCA _x Mixer 1x (Extreme) Filter 1x LFO 2x ADSR 1x (Dual) Delay 1x Ring Mod. 1x Noise _x Multiples 1x
2009-09-12 by Eyesaw
Checked this morning and found the vcf daughterboard (about 3 3/4" square pcb mounted on plastic snapfit offsets). I have owned this set for over ten years and had no operational issues. This MS-20 does have a middle screw above VCA section (not sure if that indicates version.) H
2009-09-11 by Ross Goniakowski
thanks Bakis... ________________________________ From: Bakis Sirros To: Doepfer_a100@yahoogroups.com Sent: Friday, September 11, 2009 12:19:15 PM Subject: Re: [Doepfer_a100] bad cliff jacks in the Doepfer website, in the a100 part of the FAQ section: http://www.doepfer. de/faq/a1
2009-09-11 by Bakis Sirros
in the Doepfer website, in the a100 part of the FAQ section: http://www.doepfer.de/faq/a100_faq.htm#contact%20problems Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmu
2009-09-11 by Ross Goniakowski
sorry to ask this question again, but i recall there being a "fix" for older, flakey Cliff jacks, can someone point me in the right direction? thanks... [Non-text portions of this message have been removed]
2009-09-11 by christensen.simon
Hi I'm having some strange trouble here. I did remove the jumpers on back of the A-190,2 before I installed it on the main board, but it won't work. Both of them, a-190 and 190-2, flashes red constantly on the gate signal and is not responding to pitch or anything.... Can anyone
2009-09-11 by zoog_angelspit
Lovin' this little box sooo much! We made a little video for anyone who is interested in getting into modulars...as the Dark Energy is a great way to bridge from analogue synths to modular synths. http://www.youtube.com/watch?v=DERwn7251nA
2009-09-11 by yahoo@doepfer.de
> its not proposed, its exists > > http://www.doepfer.de/home_e.htm > > but good question: is it active, and buffered? > > Richard The prototype is not active and not buffered. Introducing buffers would be easy but if buffers are added the directions (i.e. which sockets are input
2009-09-11 by yahoo@doepfer.de
> I wonder if it's possible to change the knob caps of our A 100 > with the knob caps of the Dark Energy...??? They are so nice and > moogish style!!! That's possible but as the Dark Energy knobs are bit larger (16 mm diameter, cylindrical shape, i.e. even 16 mm on the top) the d
2009-09-11 by Richard Scott
sorry for my previous mail I was getting the matrix mixer and patch mixer all twizzled up in my brain yesterday. I have to cook for 30 people on a thursdays, I shouldn't try to do internet at the same time! Richard -- I am using the free version of SPAMfighter. We are a community
2009-09-10 by james.husted@mac.com
Just the prototypes exist. Here is the link you probably meant to paste (the doepfer site uses frames so copy paste just sends the frame addy : http://www.doepfer.de/a1841.htm The doepfer is a passive matrix - It says under the power requirements: "Strombedarf/Current: 0 mA (pass
2009-09-10 by Richard Scott
its not proposed, its exists http://www.doepfer.de/home_e.htm but good question: is it active, and buffered? Richard julianfincham wrote: > > > Is the module proposed a passive module, or otherwise? > > If its simply a passive module, is there anything (much) to stop those > who
2009-09-10 by Richard Scott
In answer to your request for more info about Rob Hordijk's matrix: I think Rob won't mind me posting this. Apologies if its off topic, its definitely modular, but definitely not euro: Coincidentally, I just ordered one today BTW its not cheap either. http://dl.getdropbox.com/u/1
2009-09-10 by Michael
Have any more info on that matrix? Looks like something I might "need". On Thu, Sep 10, 2009 at 3:41 AM, Andreas- theCovertOperators.Org wrote: > > In the mean-time other people are *actually* making them, presumably > making a fair bit of money. > One such genius is Rob Hordijk:
2009-09-10 by james.husted@mac.com
I have to agree with Dieter on this one I'm afraid. I was hot for the matrix patcher as a performance tool but I was going to go to the next step and hardwire connections to the normalized pins of the row/ columns - thus having a "typical" setup that would get burned into my mind
2009-09-10 by julianfincham
Is the module proposed a passive module, or otherwise? If its simply a passive module, is there anything (much) to stop those who want one to simply get a front panel blank, some jacks, and some solid core wire? Julian
2009-09-10 by decaying_sine
Hi Dave, Are you interested in trades? If so, I could provide a list of some items that I would be willing to part with. I'm decaying.sine over at muffwiggler.com and have some good references in the good trader thread. Thanks, Brian Schweinsburg --- In Doepfer_a100@yahoogroups.c
2009-09-10 by casadoro2002
I wonder if it's possible to change the knob caps of our A 100 with the knob caps of the Dark Energy...??? They are so nice and moogish style!!!
2009-09-10 by yahoo@doepfer.de
> I thought this was set to be a winner? > > Richard I think a winner looks different :-) I've decided to publish only new modules if I'm really convinced of it myself or if there are sufficient inquiries. Both does not apply to the patch matrix module. Though I don't use my A-10
2009-09-10 by yahoo@doepfer.de
> I bought a Doepfer DIY #1 kit used recently that came with a > Digitrax 3A 15V Power Adapter. the seller was using it with 4 > 84HP rows without issue. > > My question is, does this mean the Doepfer DIY #1 PSU is putting > out more than the rated 1200ma? is it now putting out 3
2009-09-10 by Andreas- theCovertOperators.Org
Bakis Sirros skrev: > me too. > i would want one for sure. > In the mean-time other people are *actually* making them, presumably making a fair bit of money. One such genius is Rob Hordijk: http://home.deds.nl/~modular/dump/MatrixPhasers.jpg - cool thing about that particular mat
2009-09-10 by Bakis Sirros
me too. i would want one for sure. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN.
2009-09-10 by david.salter@thomsonreuters.com
Likewise. I'm surprised that it's not proved to be a desirable item. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant SSG UKI Thomson Reuters O +44 (0)20 7542 2402X 52402 M 07990562402 david.salter@thomsonreuters.com tho
2009-09-10 by davevosh@aol.com
hello to all, g6 frame for sale - 650ma power supply good condition, works fine $350 i`ll pay shipping - check, m.o., paypal thanks, dave **************A Good Credit Score is 700 or Above. See yours in just 2 easy steps! (http://pr.atwola.com/promoclk/100126575x1222846709x1201493
2009-09-10 by davevosh@aol.com
hello to all, want to trade : a-106-1 for a-121 - if interested, please let me know - best, dave **************A Good Credit Score is 700 or Above. See yours in just 2 easy steps! (http://pr.atwola.com/promoclk/100126575x1222846709x1201493018/aol?redir=http://www.freecreditreport
2009-09-09 by Richard Scott
I thought this was set to be a winner? Richard -- I am using the free version of SPAMfighter. We are a community of 6 million users fighting spam. SPAMfighter has removed 1337 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len The Professiona
2009-09-09 by mirror_saw7778
Thanks Sandy and Richard. I will treat it as 1500ma of available power. One of my rows is a A155/A154 combo so I should be good running 4 rows off of this thing. Time to do some more drilling and soldering! And yes, I did buy the kit off of Richard - thanks again! -Haven --- In D
2009-09-09 by Richard Molyneux
Hey there, I think you bought it from me!. I have exactly the same kit & Adapter running my current set up (although now only 2 1/2 rows after selling to get the Continuum). Works like a dream, the Digitrax are great adapters. Cheers, R On Wed, Sep 9, 2009 at 11:22 AM, mirror_saw
2009-09-09 by Sandy Brain
oops. should have read divide the power adaptor max current (3A) by 2. sorry On 9 Sep 2009, at 19:22, mirror_saw7778 wrote: > I bought a Doepfer DIY #1 kit used recently that came with a > Digitrax 3A 15V Power Adapter. the seller was using it with 4 84HP > rows without issue. >
2009-09-09 by Sandy Brain
divide the power adaptor voltage by 2 (half for +12, half for -12) On 9 Sep 2009, at 19:22, mirror_saw7778 wrote: > I bought a Doepfer DIY #1 kit used recently that came with a > Digitrax 3A 15V Power Adapter. the seller was using it with 4 84HP > rows without issue. > > My quest
2009-09-09 by mirror_saw7778
Prices in USD, Paypal only. good trader references on Muffs. Please reply with questions off list. Livewire AFG $320 Doepfer A110 Standard Oscillator $120 A114 Ring Mod $70 A134 VC Panner/Crossfader $80 A171 VC Slew $60 A182-1 Switched Multiple $60 I am located in Vancouver, Cana
2009-09-09 by mirror_saw7778
I bought a Doepfer DIY #1 kit used recently that came with a Digitrax 3A 15V Power Adapter. the seller was using it with 4 84HP rows without issue. My question is, does this mean the Doepfer DIY #1 PSU is putting out more than the rated 1200ma? is it now putting out 3000ma? I am
2009-09-09 by Richard Scott
basically I'm looking for a VCA and an inverter on a single module, the smaller the better because its for a beauty case can I use the A-133 as a "normal" VCA? if so, what would the quality be like? Comparable with a 132-3? or more like the 132-1? perhaps there is a way to use th
2009-09-08 by Richard Scott
> > One of the reasons I like my Behringer stomp box is the made zipper > noises it makes. yeah, it also costs £20? i love my old vesta kaza digi delays because they are basically crap and make a very special sound when they are failing to keep up with the CV... but from a modern
2009-09-08 by david.salter@thomsonreuters.com
Hi Ingo, I know your correct. One can wish though ;o) One of the reasons I like my Behringer stomp box is the made zipper noises it makes. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant SSG UKI Thomson Reuters O +44 (0
2009-09-08 by selfoscillate
imho it is very common that you get zipper noises when you modulate the delay time of a digital delay. i would not be surprised if the newer z5000 as well as the forthcoming doepfer dsp module would still have aliasing when the delay time is modulated. for me that is part of the
2009-09-08 by david.salter@thomsonreuters.com
Hi Dieter, I have a number of pieces of equipment that produce artefacts as part of the way CV controls digital elements and use those artefacts as part of the composition. However I would hope that as this unit is going to be in the 250 Euro bracket that those could be reduced t