Yahoo Groups archive
Messages
Page 241 of 564 · 28179 messages matched
2008-08-01 by Monroe Eskew
Is it? What's the difference between the effect of having different cores? On Jul 31, 2008, at 5:13 PM, selfoscillate wrote: > > right, linear fm on a110 and a111 is very different. > > --- In Doepfer_a100@yahoogroups.com, Bakis Sirros > wrote: > > > > but will it sound the same
2008-07-31 by selfoscillate
right, linear fm on a110 and a111 is very different. --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > but will it sound the same as the A111 when linear-FM'ed? > i think that the A110 is a saw core osc, right? > > > > Bakis Sirros - Parallel Worlds / Interconnected /
2008-07-31 by Bakis Sirros
but will it sound the same as the A111 when linear-FM'ed? i think that the A110 is a saw core osc, right? Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. mysp
2008-07-31 by Bakis Sirros
hi Dieter, ok, i'll buy the A111-2 if its released! btw, i am sure that the enquiries for the A111-2 will increase much, when the A111 is no longer in production. but, things change if you develope and introduce a thru zero linear fm osc with 1volt/oct tracking of course. anyway,
2008-07-31 by Alex Pearson
I would actually buy a A-110 if it had that breakout box... On Thu, Jul 31, 2008 at 12:21 PM, Ross Goniakowski wrote: > definately interested in this option... > > > Even the A-110 has an internal linear FM input available and maybe we > could offer a breakout panel for the soft-
2008-07-31 by Ross Goniakowski
definately interested in this option... > Even the A-110 has an internal linear FM input available and maybe we could offer a breakout panel for the soft-sync and linear FM input of the A-110. [Non-text portions of this message have been removed]
2008-07-31 by hardware@doepfer.de
> hi Dieter, :-) > > what? no VCO with linear FM?? > > the A111 is one of my favourite vco's.... > > :-( > > i hope that, in time, you'll develope and build the a111-2...(or, > any substritie of the A111, a vco with triangle core and linear > FM with extensive octave range and bo
2008-07-31 by Chidra_100@iinet.net.au
hmm, then i shall better order one soon... On 31/07/2008, at 9:09 PM, Bakis Sirros wrote: > hi Dieter, :-) > > what? no VCO with linear FM?? > > the A111 is one of my favourite vco's.... > > :-( > > i hope that, in time, you'll develope and build the a111-2...(or, > any substriti
2008-07-31 by Bakis Sirros
hi Dieter, :-) what? no VCO with linear FM?? the A111 is one of my favourite vco's.... :-( i hope that, in time, you'll develope and build the a111-2...(or, any substritie of the A111, a vco with triangle core and linear FM with extensive octave range and both hard and soft sync,
2008-07-31 by hardware@doepfer.de
> hi Dieter, > > yes, but what module will replace the A111 then? > > best regards, > Bakis. There are no plans for a replacement of the A-111. Best wishes Dieter Doepfer
2008-07-31 by Florian Anwander
Hi, I agree with Bakis. There is a need for a VCO with better tracking and temperature stability than the A-110. Also the frequency modulation with the triangle core oscillator in the CEM-3340 makes a big difference. Florian Bakis Sirros wrote: > yes, but what module will replace
2008-07-31 by Bakis Sirros
hi Dieter, yes, but what module will replace the A111 then? best regards, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedm
2008-07-31 by hardware@doepfer.de
> Hmm... considering that module was mentioned; > > How far away if the A-111-2 Dynamic VCO prototype from release? > > ::) > > Michael The inquiries for the A-111-2 have been very poor so far. This is why other new modules have been prefered. The further development of the A-111
2008-07-31 by hardware@doepfer.de
> Sorry Dieter, > But are you sure that A129 is correct in this row? Don't you mean A122 ? > If it is so, which of the vocoder modules is affected then? > > Greetings, > > Ernst The A-129-2 uses CEM3381/PA381. Consequently A-129-1 and -2 are affected as the A-129-1 makes sense on
2008-07-31 by achtung_999
Sorry Dieter, But are you sure that A129 is correct in this row? Don't you mean A122 ? If it is so, which of the vocoder modules is affected then? Greetings, Ernst On Thu, Jul 31, 2008 at 12:24 PM, wrote: > Dear members, > > I just wanted to let you know that our present source o
2008-07-31 by Chidra_100@iinet.net.au
Hmm... considering that module was mentioned; How far away if the A-111-2 Dynamic VCO prototype from release? ::) Michael On 31/07/2008, at 6:24 PM, wrote: > Dear members, > > I just wanted to let you know that our present source of CEM3320, > CEM3340 > and CEM3381/PA381 (Paul Sc
2008-07-31 by hardware@doepfer.de
Dear members, I just wanted to let you know that our present source of CEM3320, CEM3340 and CEM3381/PA381 (Paul Schreiber/Synthtech) is no longer able to supply these circuits. Consequently all modules that contain these circuits have to be discontinued. These modules are affecte
2008-07-31 by hardware@doepfer.de
> I just got my A-190 in. I was looking at it, and it has two circuit > boards. On the larger board, right at the top, under the "FACE" part > of "INTERFACE", there is an 8 pin chip. One of the pins is broken > off, though. Is this normal? Just kind of had me alarmed, wanted to >
2008-07-31 by hardware@doepfer.de
> I played with it again, and you're right, the PW only affects the > square. But sine is definitely not putting anything out. I checked > the cable and connections are good. The only thing is, on the > connector board, it's a plug-in connection, but on the other end, the > ribbo
2008-07-31 by Doug
This pin is also missing on mine, so I'm calling it normal. Doug --- In Doepfer_a100@yahoogroups.com, "techmaster242" wrote: > > I just got my A-190 in. I was looking at it, and it has two circuit > boards. On the larger board, right at the top, under the "FACE" part > of "INTERF
2008-07-31 by techmaster242
--- In Doepfer_a100@yahoogroups.com, wrote: > > > I just got my A-190 and was able to play my A-110 into my monitoring > > setup finally. Saw, square, and triangle work fine, but it doesn't > > seem to be playing a sine wave at all. I've noticed that if I have > > the pulse width
2008-07-30 by Florian Anwander
Hi if you are able to read schematics and aprts layouts: http://www.doepfer.de/a110_tec.htm will show the right spots. Florian techmaster242 wrote: > --- In Doepfer_a100@yahoogroups.com, wrote: > >>>I just got my A-190 and was able to play my A-110 into my monitoring >>>setup fin
2008-07-30 by techmaster242
--- In Doepfer_a100@yahoogroups.com, wrote: > > > I just got my A-190 and was able to play my A-110 into my monitoring > > setup finally. Saw, square, and triangle work fine, but it doesn't > > seem to be playing a sine wave at all. I've noticed that if I have > > the pulse width
2008-07-30 by hardware@doepfer.de
> I am completely ignorant about component of singles modules of > system A 100. I use intuition and poor memory of school to > understand.______In wich kind of modules i can find potentiometer > 50k....100k? How i can connect it? Thank Robert I did not mean to use the potentiome
2008-07-29 by Herman Pearl
This one's pretty fun: http://share.ovi.com/media/SoySos.public/SoySos.10005 189-1 in mode 5 Casio PT-30 bossa-nova beat as sound source Triangle waves from 2 A-145's as CV source retriggered by gate out of A-119 into into BC CV in. Tweeking Bit Crunch, Sample Rate, SR CV level ,
2008-07-29 by robert wholeshorn
I am completely ignorant about component of singles modules of system A 100. I use intuition and poor memory of school to understand.______In wich kind of modules i can find potentiometer 50k....100k? How i can connect it? Thank Robert --- Lun 28/7/08, hardware@doepfer.de ha scri
2008-07-29 by hardware@doepfer.de
> I just got my A-190 and was able to play my A-110 into my monitoring > setup finally. Saw, square, and triangle work fine, but it doesn't > seem to be playing a sine wave at all. I've noticed that if I have > the pulse width knob too far to the left or right, the square wave an
2008-07-29 by hardware@doepfer.de
> I just had a fuse go out on my A100 NT12 power supply. Is this a > standard type fuse that I can easily find at Radio Shack or is > this a specialized type that I'll need to order? > > Ross Stapf > Cedar Hill TX Please look at our website to the FAQ page: www.doepfer.com > FAQ
2008-07-28 by Ross Stapf
I just had a fuse go out on my A100 NT12 power supply. Is this a standard type fuse that I can easily find at Radio Shack or is this a specialized type that I'll need to order? Ross Stapf Cedar Hill TX [Non-text portions of this message have been removed]
2008-07-28 by techmaster242
I just got my A-190 and was able to play my A-110 into my monitoring setup finally. Saw, square, and triangle work fine, but it doesn't seem to be playing a sine wave at all. I've noticed that if I have the pulse width knob too far to the left or right, the square wave and I thin
2008-07-28 by Herman Pearl
New demo This should get you there: http://share.ovi.com/media/SoySos.public/SoySos.10003 I think this one shows a great variety of tones that can be derived from a single set of input and CV source. 189-1 in mode 9 Triangle wave from an A-145 as sound source Triangle wave from a
2008-07-28 by techmaster242
I just got my A-190 in. I was looking at it, and it has two circuit boards. On the larger board, right at the top, under the "FACE" part of "INTERFACE", there is an 8 pin chip. One of the pins is broken off, though. Is this normal? Just kind of had me alarmed, wanted to make sure
2008-07-28 by techmaster242
--- In Doepfer_a100@yahoogroups.com, wrote: > > You find my answers written inline. > > Best wishes > Dieter Doepfer > > > -----Ursprüngliche Nachricht----- > > Von: Doepfer_a100@yahoogroups.com > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von techmaster242 > > Gesendet: S
2008-07-28 by hardware@doepfer.de
You find my answers written inline. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von techmaster242 > Gesendet: Sonntag, 27. Juli 2008 23:00 > An: Doepfer_a100@yahoogroups.com >
2008-07-28 by hardware@doepfer.de
> I need a cv source -12 + 12 volts to control a filtered coffé of > analogue solution and doepfer synth. Doepfer is controlled by cv > source -5 +5 volts; anyone know some modules like paia or banana logue. > I think i can use Kenton prosolo mkII but i need only cv source not >
2008-07-28 by Florian Anwander
Hi Robert, > AH! That's really good! Wich kind of problems can have some doepfer modules than works with +/-5volts? The CVs will clip. Everything above +5 Volt / below -5 Volt may have no impact. Florian
2008-07-27 by techmaster242
I have an A-137 and A-110 in a DIY #1 kit, mounted in a wooden case. For power, it uses a 120v->16v AC adaptor, that has two wires going into the DIY #1's power supply, then it goes into the power bus. I don't have the proper mono wiring yet, but used some 3.5mm stereo patch cabl
2008-07-27 by robert wholeshorn
AH! That's really good! Wich kind of problems can have some doepfer modules than works with +/-5volts? --- Dom 27/7/08, Monroe Eskew ha scritto: Da: Monroe Eskew Oggetto: Re: [Doepfer_a100] cv source -12 +12 volt A: Doepfer_a100@yahoogroups.com Data: Domenica 27 luglio 2008, 02:2
2008-07-27 by Monroe Eskew
No, it multiplies the amplitude of the signal by a factor of up to 2.5, meaning 5 volts input results in 12.5 volts output. On Jul 26, 2008, at 2:52 PM, robert wholeshorn wrote: > The A133 running with with +/- 2,5 volts, I need +/-12 volts: > filtered coffeé running with CV +/-
2008-07-26 by robert wholeshorn
The A133 running with with +/- 2,5 volts, I need +/-12 volts: filtered coffeé running with CV +/- 12 volts Robert --- Sab 26/7/08, Monroe Eskew ha scritto: Da: Monroe Eskew Oggetto: Re: [Doepfer_a100] cv source -12 +12 volt A: Doepfer_a100@yahoogroups.com Data: Sabato 26 luglio 2
2008-07-26 by Monroe Eskew
The A133 VC polarizer will multiply a signal by up to +/- 2.5, so running a CV through there should do the trick. Monroe On Jul 26, 2008, at 1:30 PM, clusters_movie wrote: > I need a cv source -12 + 12 volts to control a filtered coffé of > analogue solution and doepfer synth. Do
2008-07-26 by clusters_movie
I need a cv source -12 + 12 volts to control a filtered coffé of analogue solution and doepfer synth. Doepfer is controlled by cv source -5 +5 volts; anyone know some modules like paia or banana logue. I think i can use Kenton prosolo mkII but i need only cv source not midi cv co
2008-07-26 by Bakis Sirros
hello all, DiN30 - iNDEX03 Release date September 27th 2008 iNDEX03 is the third DiN compilation album and includes two tracks each from the titles DiN21 - 29. The artists include Robert Rich, Ian Boddy, Tetsu Inoue, Radio Massacre International, Surface 10, Parallel Worlds, Hoff
2008-07-26 by David Bulog
polyvoks VCF USD$180 + shipping Elby Designs Super Psycho LFO USD$180 + shipping A-100P Suicase with A190 Midi to Cv module and and 100 AD5 +5v adaptor board (1200mA) Rear Mounted and extra blanking panels 230V pay pal fees included USD$679 + shipping please email me off list tha
2008-07-25 by Herman Pearl
Looking to see if there are any modular users near the Pittsburgh PA area in the US. I'm interested in hanging out and exchanging information, ideas, tips, solutions....etc My system is portable and I don't mind taking a little drive with it. PM me or post.
2008-07-24 by david rothbaum
Hi, I have the following for sale. All prices include shipping in the continental U.S. Overseas sales will be more for shipping. All modules are in perfect working condition and cosmetically only have the normal scratches near the mounting holes. Paypal Only. MFB Seq-01 - $170 Do
2008-07-24 by gabu_004
Mine is in that type hahahaha!! :P SO yeah lots of cool gear... some retard on matrix synth said: A G2 with shit arount... I guess he didn't see the modular cases, etc... man people are so easy to judge with Internet protection screen! cheerrrzzz g. --- In Doepfer_a100@yahoogroup
2008-07-23 by Ross Goniakowski
hello, if anyone is selling an A-154 sequencer controller, i'm looking...cosmetics not an issue, just needs to work perfectly... (i'm in the Chicago area) thanks, rg [Non-text portions of this message have been removed]
2008-07-23 by Ross Goniakowski
yeah, i have a Centris 650, 2 Quad 950s, 16 channels of old Pro Tools, various Digidesign cards, old software, a Mirage keyboard, various other synth stuff stacked around ...i have no need for it, i just have to set it outside the night before garbage day and it will be gone in a
2008-07-23 by Monroe Eskew
check out the top blurb at www.wendycarlos.com [Non-text portions of this message have been removed]