Yahoo Groups archive
Messages
Page 239 of 564 · 28179 messages matched
2008-08-08 by jared
Hello. I'm looking into buying one of the BBD modules. I have a few questions: Which BBD delay has the greatest span of delay times (from longest to shortest) ? I've read the manual but it doesn't explain the min/max for each module. Is there some sort of comparison chart for the
2008-08-08 by Chidra_100@iinet.net.au
Anyone selling or would consider selling an MS-404? :)
2008-08-08 by matijnboshoven
--- In Doepfer_a100@yahoogroups.com, "jared" wrote: > > Hello. I'm looking into buying one of the BBD modules. I have a few > questions: > > > > Which BBD delay has the greatest span of delay times (from longest to > shortest) ? > > > > I've read the manual but it doesn't explain
2008-08-08 by zoog_angelspit
I also love industrial music...here's my thoughts: I own the AS-500E (EMS Synthi Clone) that you mentioned. it is AWESOME!!! it's a diode filter. Doepfer also do a Doide filter called A-102...and i think it's their BEST filter...really unique and awesome sound - LOVE IT! it can b
2008-08-08 by hardware@doepfer.de
> Is the 106-6 basically a more improved version of the 121? Or are > they completely different? The basic principles are different. The A-121 is a state variable filter (an analog realized oszillation differential equation below self resonance), the A-106-6 is basically the usua
2008-08-08 by p. hendricks
On 8/7/08 12:44 PM, "techmaster242" wrote: > Is the 106-6 basically a more improved version of the 121? Or are > they completely different? it's a simplified version of the a-107: http://www.doepfer.de/a1066.htm
2008-08-07 by techmaster242
Is the 106-6 basically a more improved version of the 121? Or are they completely different? --- In Doepfer_a100@yahoogroups.com, wrote: > > From my personal point of view the new A-106-6 XP VCF offers the most > features at a reasonable price - provided that you like the XP filt
2008-08-07 by hardware@doepfer.de
> i have now two doepfer systems, one has the old a100 PSU and the other > has the newer PSU2, with the ring core trafo. i noticed a difference > in the output levels, the PSU2 deliver higher output, easy to distort > at maximum, it s this normal or perhaps i did something wrong?
2008-08-07 by Chidra_100@iinet.net.au
Was there any interest in this module? Synth Freak a137v2 http://launch.ph.groups.yahoo.com/group/Doepfer_a100/photos/view/80b0?b=2 ? :) I like [Non-text portions of this message have been removed]
2008-08-07 by Chidra_100@iinet.net.au
Thanks, still looking for one :) I love it. On 06/08/2008, at 3:40 AM, matijnboshoven wrote: > --- In Doepfer_a100@yahoogroups.com, "Chidra_100@..." > wrote: > > > > > > Just wondeing if anybody has seen any MS-404 sound samples/ > examples on > > any websites recently, and if an
2008-08-07 by jalmari3
Indeed, T&H works correctly but S&H doesn't. Initially I had both units in S&H mode. --- In Doepfer_a100@yahoogroups.com, wrote: > > > My A-164-1 Manual gate works fine with some modules. However, I can't > > get it to trigger A-148 S&H. Curiously, if I first run the A-164-1 > >
2008-08-07 by pro2andrius
i have now two doepfer systems, one has the old a100 PSU and the other has the newer PSU2, with the ring core trafo. i noticed a difference in the output levels, the PSU2 deliver higher output, easy to distort at maximum, it s this normal or perhaps i did something wrong? thanks
2008-08-07 by hardware@doepfer.de
From my personal point of view the new A-106-6 XP VCF offers the most features at a reasonable price - provided that you like the XP filter sound. You get 15 different filters (4 differens LPFs, 3 different HPFs, 4 different BPFs, notch and combinations of notch and LPF). For mor
2008-08-07 by hardware@doepfer.de
> My A-164-1 Manual gate works fine with some modules. However, I can't > get it to trigger A-148 S&H. Curiously, if I first run the A-164-1 > through a LPF (no resonance, cutoff frequency at max), then the > triggering works as expected... I'll try out this combo to find out wha
2008-08-07 by ysinollaysi
--- In Doepfer_a100@yahoogroups.com, "techmaster242" wrote: > > I've just about got the basic sound generation/modulation portion of > my synth completed, and now I need to start looking at subtraction. > My gut instinct would tell me to get the A-120, but I remember reading > so
2008-08-07 by Doug
Having had the A-120, the A-121 and the Synthi Filter, I would take the A-121. Further, for a small setup, perhaps a multimode filter (the A-121)is most appropriate. I have not tried the Polivoks or the Frequensteiner, unfortunately. Regarding great industrial sound, I can't reco
2008-08-07 by techmaster242
I've just about got the basic sound generation/modulation portion of my synth completed, and now I need to start looking at subtraction. My gut instinct would tell me to get the A-120, but I remember reading somewhere that the A-120 is fairly weak as far as filters go, and there
2008-08-06 by Pierre Zeeman
Navs has a pretty decent set (not to mention loads of samples of other modules as well): http://www.canecutters.co.uk/index.php?option=com_content&task=view&id=23&Itemid=48 [Non-text portions of this message have been removed]
2008-08-06 by Bakis Sirros
hello list, i have for sale a Near Mint setting chart for the korg MS20 (you know, its a white paper with holes in it, that you put on the MS20 to write down settings...?) it is in Mint condition, apart from a folding in the middle, that i had to do, to store it all these years.
2008-08-06 by jalmari3
I just purchased my first oscillator without a wide range continuous tuning knob. (It has an octace switch and a fine tune of +/-6 semitones). I find this arrangement frustrating and unsuitable for my needs. In my opinion Plan B M15 has it right: Continuous Coarse tuning and Fine
2008-08-06 by jalmari3
My A-164-1 Manual gate works fine with some modules. However, I can't get it to trigger A-148 S&H. Curiously, if I first run the A-164-1 through a LPF (no resonance, cutoff frequency at max), then the triggering works as expected...
2008-08-06 by James Husted
Actually that would be a better idea. Then the cost of the main VCO could be cheaper to those who don't need these options. This module of course would work for VCFs also. For me the module would be perfect if it had an Octave select switch, a fine tune knob, a CV in (or two that
2008-08-06 by David Bulog
> > Elby Designs Super Psycho LFO USD$180 + shipping > > > A-100P Suicase with A190 Midi to Cv module and and AD5 +5v adaptor > board > (1200mA) Rear Mounted and extra blanking panels 230V > USD$679 + shipping--would suit Australian buyers cheap shipping > > please email me off l
2008-08-06 by Florian Anwander
Hi Mark > * Is installing the +5v adaptor straightforward? like the cable of a standard module. > * Do I need an adaptor for each +5v module or how many can I run from one adaptor? not necessarily. http://www.doepfer.de/a100z_e.htm says up to 100mA. Pay attention: this is the cur
2008-08-06 by elminkopeligroso
Many thanks Florian --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hi Mark > > > * Is installing the +5v adaptor straightforward? > like the cable of a standard module. > > > * Do I need an adaptor for each +5v module or how many can I run from one adaptor? > no
2008-08-06 by Florian Anwander
Hi the Micro Performance Poly.MIDI 1 is sold. Florian Florian Anwander wrote: > Hello, > > I am thinking about selling the following gear which I do not use often > enough and it is eating up space. I know the prices are in the upper > range. All these are things I would keep if
2008-08-06 by hardware@doepfer.de
> GD2, I believe the VCF and VCA is contained on the CEM chip being > used for the VCO, thus the lower price, and probably the reason > to include all such things in one module. Perhaps somebody could > confirm this... > > Tony To disclose the "secret": the core of the A-111-2 is
2008-08-06 by hardware@doepfer.de
> You are very correct - The AS system power supply headers are more > different than just the keyed headers, the pin-out is different also > - Big City sells adaptor cables to go from AS modules to Doepfer > cases but don't know the abut the other way round. The AS site is > pre
2008-08-06 by elminkopeligroso
Hi folks I want to install two Analogue Solutions modules requiring +5v power into a Doepfer wooden budget case and have a couple of questions: * Is installing the +5v adaptor straightforward? * Do I need an adaptor for each +5v module or how many can I run from one adaptor? Than
2008-08-06 by matijnboshoven
--- In Doepfer_a100@yahoogroups.com, "matijnboshoven" wrote: > > Hello I have 2 A-111 VCO's for sale. > They are in perfect working order and visualy only the inevitable > screw wear. 70% of the newprice (168 euro). I have paypal. I will ship > worldwide, shipping cost depending
2008-08-06 by herwig.krass
it would be better to use a combination of a simple module of octave knob and precision adder. ciao herw --- In Doepfer_a100@yahoogroups.com, James Husted wrote: > > Why not a combo of both - a multi-octave select switch wit it's last > position turning the tuning knob into a wid
2008-08-05 by Monroe Eskew
Hello, I was wondering what this filter sounds like. Can't find any examples online. Doepfer says it does not self-oscillate, but how high does the resonance go? Thanks, Monroe
2008-08-05 by Alex Pearson
There sure is, the AFG comes close too... ;-) But one from Doepfer would be nice, I rather give them my money. Alex On Tue, Aug 5, 2008 at 5:46 PM, laryn91 wrote: > I think there's already a good dynamic VCO available that's pretty close > to that - the > Zeroscillator. > > --- I
2008-08-05 by Florian Anwander
Hi I decided to draw back the offer of the Xbase09 - I played the last hour with it, and it convinced me again. Everything else is still available until now. Florian
2008-08-05 by Herman Pearl
FS/FT Doepfer A-149-1/A-149-2 Quantized/Stored Random Voltages I prefer to sell or trade both together $170 or an interesting trade? This is a very useful module combination but I think not suited to my style of working. I would be interested in some type of Sample and Hold modul
2008-08-05 by Laurie Biddulph
The stripe is normally used to identify pin 1 and this is the way it should be used. However, on systems like Doepfer the only important point is that the stripe is orientated to the connector/board the same at both ends i.e. bottom-to-bottom (described way) or top-to-top. Some s
2008-08-05 by laryn91
I suspect going digital is an effective way to make new dynamic VCOs. The Plan B Model 30 looks very interesting. I wish they'd hurry up and put up some demo sounds! --- In Doepfer_a100@yahoogroups.com, "Alex Pearson" wrote: > > There sure is, the AFG comes close too... ;-) > > B
2008-08-05 by laryn91
I think there's already a good dynamic VCO available that's pretty close to that - the Zeroscillator. --- In Doepfer_a100@yahoogroups.com, "Alex Pearson" wrote: > > For me... A "dynamic" VCO would have the following: > 1. Ability to reach sub-audio > 2. horizontal and vertical wa
2008-08-05 by Alex Pearson
For me... A "dynamic" VCO would have the following: 1. Ability to reach sub-audio 2. horizontal and vertical waveshaping w/ cv control and attenuation 3. linear / exponential fm w/ attenuation 4. harmonic automation 5. focused on additive rather than subtractive synthesis 6. the
2008-08-05 by matijnboshoven
--- In Doepfer_a100@yahoogroups.com, "Chidra_100@..." wrote: > > > Just wondeing if anybody has seen any MS-404 sound samples/examples on > any websites recently, and if anybody has one for sale (how much do > they go for?) > I saw one on ebay once, im very curious of its functio
2008-08-05 by Bakis Sirros
not all features can be dublicated with other modules. the linear FM of the filter frequency is Unique to the A111-2. also, patch-programmability have many of the doepfer modules (for example: the a143-1 can do many things depending on how it is patched. it can even process audio
2008-08-05 by Brandon Daniel
On Tue, Aug 5, 2008 at 9:15 AM, Monroe Eskew wrote: > I can't see evidence that there is something peculiar about where the > red band is painted. One has to get the right voltages to the right > places, but can't one accomplish this by reversing the orientation of > the plugs at
2008-08-05 by selfoscillate
you're absolutely right, tony. the basic functions of the a111/2 (vco, vcf, vca, crossfader) are all integrated in one cem chip. thats why all these functions are available, thats why the unit is so affordable, thats why crosstalk is not really an issue. if we would pay per funct
2008-08-05 by James Husted
You are very correct - The AS system power supply headers are more different than just the keyed headers, the pin-out is different also - Big City sells adaptor cables to go from AS modules to Doepfer cases but don't know the abut the other way round. The AS site is pretty poor o
2008-08-05 by Anthony Rolando
GD2, I believe the VCF and VCA is contained on the CEM chip being used for the VCO, thus the lower price, and probably the reason to include all such things in one module. Perhaps somebody could confirm this... Tony > To: Doepfer_a100@yahoogroups.com > From: guy@guyd2.com > Date:
2008-08-05 by Anthony Rolando
Ok, I should have read your original question more closely. The minute I hear something about reversing power cables I get nervous... Tony > To: Doepfer_a100@yahoogroups.com > From: monroe.eskew@gmail.com > Date: Tue, 5 Aug 2008 11:15:11 -0500 > Subject: Re: [Doepfer_a100] red ba
2008-08-05 by James Husted
Technically speaking you can reverse the plug orientation ONLY if you do on both ends and ONLY if you make sure on the 10-pin plugs that the socket (the cable end) us lined up to the -12V pins and doesn't over hang that end of the header at all. The cables are just cables - no el
2008-08-05 by Guy D2
The reason I voted "no" to the A111-2 in the poll, is twofold. To me, modular synthesis is all about modularity (d'oh). One exception to that would be the "patch-programmability" of the Serge & Buchla systems, but that is not the case here. All of the functionality of that comple
2008-08-05 by Florian Anwander
Hello, I am thinking about selling the following gear which I do not use often enough and it is eating up space. I know the prices are in the upper range. All these are things I would keep if I had enough room, and I will sell only if I can get reasonable amount money for (reason
2008-08-05 by Monroe Eskew
I can't see evidence that there is something peculiar about where the red band is painted. One has to get the right voltages to the right places, but can't one accomplish this by reversing the orientation of the plugs at BOTH ends simultaneously? (The reason I ask is that I was s