Yahoo Groups archive
Messages
Page 262 of 564 · 28179 messages matched
2008-03-21 by aliisvorbach
Hello everyone, I am about to start building another format modular synth and it seems to me the mini jack formats offer more range of modules than banana so that is the reason I will go that way although I very much admire the banana modules of modcan and cynthia. My question is
2008-03-21 by neil jendon
Hey guys, I was wondering where to start on fixing this module. I have a 2048 step A-188-1 that passes a dry signal but nothing on the effected side (Mix control to "0": full volume dry signal, mix control to "10": nothing.) The only thing I noticed was that the CA3096E IC got ve
2008-03-21 by Richard Scott
you guys are getting that this pins can have pots, light sensors, switches attached, not just pins, right? this kind of matrix can potentially do quite a bit more than simple routing - its a real performance tool I think, which goes beyond what you could do an VCS3 Richard -----
2008-03-20 by amnesia
> > i > A I am a fan of all the SOU, doepfer, plan B, livewire, wiard and 2 joysticks >
2008-03-20 by laryn91
I remember seeing pictures of old analogue computers that had removable patch panels. This way engineers could preserve and reuse their previous simulations without having to always re-patch everything from scratch. I always thought the same thing would be useful for modular synt
2008-03-20 by Korhan Erel
So any other suggestions on this? On 3/17/08, Korhan Erel wrote: > > Hi! > > Thanks for all the suggestions. > > Florian, thanks for pointing me at the right direction about gate signals. > You're right, a manually triggered gate would work in my setup. The > crossfader I don't n
2008-03-20 by amnesia
yes the miniwave in euro silver would clean up , no one does this in euro > >
2008-03-20 by Korhan Erel
Hi! Can the A-150 / A-151 inputs handle audio as well? Or only control voltages? Can they be used to switch between several audio sources (without using VCAs or mixers). Thanks, Korhan [Non-text portions of this message have been removed]
2008-03-20 by Ross Goniakowski
yes, very interested...don't care what color it is, just as long as it will power up from a Eurorack style PSU... ----- Original Message ---- From: John Blacet To: doepfer_a100@yahoogroups.com Sent: Wednesday, March 19, 2008 6:36:52 PM Subject: [Doepfer_a100] Blacet Hex Zone in E
2008-03-20 by Carlos
whats the easies way to use a doepfer lfo or vco or other pulse producing device to time somethign that takes dyn sync in? I aquired a cyclodon sequencer recently and is a very cool little sequencer, but the only way to clock it externally is with dyn sync... I now that there is
2008-03-20 by James Husted
Don't hit a tree! Have fun! -James On Mar 20, 2008, at 11:15 AM, hardware@doepfer.de wrote: > Dear members, > > I have to recover from the Musikmesse for a couple of days. I'm not > in the > office from March 20 to 27 but skiing in Italy :-) > > Best wishes > Dieter Doepfer > > >
2008-03-20 by James Husted
Don't hit a tree! Have fun! -James On Mar 20, 2008, at 11:15 AM, hardware@doepfer.de wrote: > Dear members, > > I have to recover from the Musikmesse for a couple of days. I'm not > in the > office from March 20 to 27 but skiing in Italy :-) > > Best wishes > Dieter Doepfer > > >
2008-03-20 by Dan Levey
John, I'm very glad you're getting in to Eurorack. Obviously you see the immense and growing arena for your great products. The Miniwave (which I have with a Euro faceplate and love) should be your next one and is heavily desired. Dan http://www.REwireMusic.com
2008-03-20 by hardware@doepfer.de
Dear members, I have to recover from the Musikmesse for a couple of days. I'm not in the office from March 20 to 27 but skiing in Italy :-) Best wishes Dieter Doepfer
2008-03-20 by Korhan Erel
I didn't know Andreas had this product in mind!! However, it doesn't seem to be available. I would prefer something like this as I would like to have this matrix board flat on a surface, in front of me, instead of being mounted in a rack. On 3/20/08, James Husted wrote: > > On th
2008-03-20 by James Husted
On the modular I see this module's usefulness only in live situations, with "pins" half-way plugged in waiting to change the patch. Depending on how much needed to be changed, the switched multiples and Crossfader/Panning modules would do the trick for me. I think it would be a i
2008-03-20 by James Husted
The original E-mu modular had this type of setup - it was very useful. It makes the matrix truly useful. Next we need a Presto-patch module to set next to it - just kidding! -James BTW - what is the extra "A" jack for? -James On Mar 20, 2008, at 4:54 AM, hardware@doepfer.de wrote
2008-03-20 by Tim J
Would the price be the same? Kits and assembled? I'd be up for one if it was the same price (and silver in euro) To: Doepfer_a100@yahoogroups.comFrom: blacet@blacet.comDate: Thu, 20 Mar 2008 07:20:07 -0700Subject: Re: [Doepfer_a100] Re: Blacet Hex Zone in Eurorack? > if John deci
2008-03-20 by hardware@doepfer.de
> Hi Dieter, perhaps you could manufacture this as a standalone unit? No. We will leave this option to Schneiders Buero/Berlin. We will not offer a competitive product to their Steckbox. If you want you could built a standalone version with the free rail cuts we offer on our Sond
2008-03-20 by David Salter
Florian, the 1st link worked for me OK david David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 Get the latest news at Reuters.com ________________________________ From: Doepfer_a100@yah
2008-03-20 by Richard Scott
no its not available its Herr Schneider's fantasy at the moment - they have a prototype only Richard ----- Original Message ----- From: Florian Anwander To: Doepfer_a100@yahoogroups.com Sent: Thursday, March 20, 2008 3:36 PM Subject: Re: [Doepfer_a100] again: A-100 patch matrix H
2008-03-20 by Florian Anwander
uuups, > (http://www.schneidersbuero.de/index.php?lang=en§=products&kategorie=hersteller&hersteller=Schneidersbuero&product=Steckbox%208x8%20V1%20Verbindungsmatrix¤cy=EURO_BRUTTO) unfortunately this does not work: Get to http://www.schneidersbuero.de select your languag
2008-03-20 by Florian Anwander
Hi Korhan, this is already available from Schneiders Buero (looooong URL follows): (http://www.schneidersbuero.de/index.php?lang=en§=products&kategorie=hersteller&hersteller=Schneidersbuero&product=Steckbox%208x8%20V1%20Verbindungsmatrix¤cy=EURO_BRUTTO) All the best, Fl
2008-03-20 by John Blacet
The current size is 6" wide so whatever is the equivalent in Doepfer units... The price would be the same. I would plan a run of 100 units as a one time event with preorders necessary to secure a unit. -- John Blacet
2008-03-20 by Korhan Erel
Hi Dieter, perhaps you could manufacture this as a standalone unit? On 3/20/08, Richard Scott wrote: > > Hi > > I agree with you, I would choose a standalone matrix and connect it in a > fixed, labelled semi-modular way with an analog synth, moogerfoogers etc - > but I would not
2008-03-20 by John Blacet
> if John decides to do a run of euro format Hex-Zones, > i think it should be silver faceplate. ---Silver is no problem. Might be more of a lightly brushed finish.... Lettering would be the same as our rack version. -- John Blacet
2008-03-20 by hardware@doepfer.de
> Hello Dieter > > > For all new modules the switching contact of each socket > (provided that it > > is unused) is connected to a solder point next to the socket. > We will modify > > even the pcb's of older modules little by little and add these solder > > points. > That is gre
2008-03-20 by Stu Grimshaw
i'm voting with chris, make 'em bright red! no, i'm not being sarcastic :)
2008-03-20 by Bakis Sirros
if John decides to do a run of euro format Hex-Zones, i think it should be silver faceplate. it would match the whole system's aesthetics much more. the only black euro modules are the MFB and they do not look very fitting, because of this reason, IMHO... (although i am sure they
2008-03-20 by Chris Henkel
...no!...no 'uniform' colour - or, please, make it an option; I do have modules from different manufacturers (at this time silver and black, planning on transparent also) in my setup, and - apart from being easier to manage (for me) it makes also for an much more interesting view
2008-03-20 by Florian Anwander
Hello Dieter > For all new modules the switching contact of each socket (provided that it > is unused) is connected to a solder point next to the socket. We will modify > even the pcb's of older modules little by little and add these solder > points. That is great!!! Will you off
2008-03-20 by hardware@doepfer.de
> Hello, > > hardware@doepfer.de wrote: > > From my point of view such a matrix is very useful in a > semi-modular unit > > with fixed assignments of the inputs and outputs. > This leads me to another topic. I really would appreciate a kind of > "standard hardware interface" for
2008-03-20 by Chris Henkel
...yes... 2008/3/20, John Blacet : > > Any interest? > > [Non-text portions of this message have been removed]
2008-03-20 by Florian Anwander
Hello, hardware@doepfer.de wrote: > From my point of view such a matrix is very useful in a semi-modular unit > with fixed assignments of the inputs and outputs. This leads me to another topic. I really would appreciate a kind of "standard hardware interface" for pre-patched conn
2008-03-20 by cray5656
yes if it was a silver faceplate...id be intersted in more blacet stuff if it was euro and silver
2008-03-20 by cray5656
here are my vids http://www.youtube.com/results?search_query=cray56&search_type=&aq=f
2008-03-20 by Richard Scott
Hi I agree with you, I would choose a standalone matrix and connect it in a fixed, labelled semi-modular way with an analog synth, moogerfoogers etc - but I would not really want to use one as part of my main modular system - a modular with mixers and multples is already a huge m
2008-03-20 by Bakis Sirros
A183-1 Patch Matrix module poll is now up! please, vote for this! it will remain open for only 21 days. thank you, Bakis. --- hardware@doepfer.de wrote: > Dear members, > > after some discussions with Musikmesse visitors and > my own experience I > doubt if the patch matrix is re
2008-03-20 by hardware@doepfer.de
Dear members, after some discussions with Musikmesse visitors and my own experience I doubt if the patch matrix is really a useful tool within a modular system. From my point of view such a matrix is very useful in a semi-modular unit with fixed assignments of the inputs and outp
2008-03-20 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Would you buy a Patch Matrix module A-183-1: (details on this module here: http://www.doepfer.de/a1831.htm Dieter Doepfer says: Details of the final version still have to be discussed in another poll.
2008-03-20 by helitr0n
YES SIR! that would be great to have hel --- In Doepfer_a100@yahoogroups.com, "John Blacet" wrote: > > Hi All: > > It occurs to me that it would not be difficult to port this over. Mainly a > new front panel. > > Any interest? > > You can see more on our main page: > http://www.b
2008-03-19 by John Blacet
Hi All: It occurs to me that it would not be difficult to port this over. Mainly a new front panel. Any interest? You can see more on our main page: http://www.blacet.com -- John Blacet
2008-03-19 by Guy D2
Works fine on my Mac, with the newest Safari 3.1. Those error messages I had before as well... I assume those are missing data for modules or something... -g On 19 Mar 2008, at 21:07, Brandon Daniel wrote: > On Sun, Mar 16, 2008 at 9:22 AM, modularplanner > wrote: > > Hi all, > >
2008-03-19 by Brandon Daniel
On Sun, Mar 16, 2008 at 9:22 AM, modularplanner wrote: > Hi all, > > I've had quite a few requests to implement the other Euro Rack > manufacturers into my modular planner. Here is taster of whats to > come. It's only in a "Monster Case" version at the moment, I will be > creatin
2008-03-19 by jb at fernforest
Dear Doepfer group, I was enjoying myself making random improvisations on my Doepfer suitcase, so I've videoed it and put it on www.myspace.com/vjjamesbragg I'd be keen to see videos of others making sound on their modular set-ups I'm in Bristol UK and once monthly at The Watersh
2008-03-19 by Steven Taylor
Is there something wrong with your '?' key??? Oh my gosh??? On Wed, Mar 19, 2008 at 9:58 AM, mark francombe wrote: > > > > > > > >>Yeah its not done in Flash per se, rather another program called Swish > >>Max2. > > YIKES!! Not done in Flash!!! Ive never heard of Swish Max2, but.
2008-03-19 by mark francombe
>>Yeah its not done in Flash per se, rather another program called Swish >>Max2. YIKES!! Not done in Flash!!! Ive never heard of Swish Max2, but.. um WOW!!! Can you import what you have done INTO FLash! later???, seems like you have done a lot of work in the wrong app. The most g
2008-03-19 by Richard Scott
does a vactoral function something like a slew generator or smoothing ciruit? Richard ----- Original Message ----- From: Korhan Erel To: Doepfer_a100@yahoogroups.com Sent: Wednesday, March 19, 2008 8:59 AM Subject: Re: [Doepfer_a100] filter for saxophone? Hi Richard, The same is
2008-03-19 by Korhan Erel
Yes I do, I think. I'll check on other computers. Thanks! On 3/19/08, Guy D2 wrote: > > how come I can never open the site? I click on the link sent by Andy > > and I > > get "Page cannot be displayed". I am PC with IE 6.0. > > > > You have Flash installed ? > > -g >
2008-03-19 by Korhan Erel
Hi Richard, The same is valid for the clarinet. The clarinet player I work with designs his processing sets with the assumption that the original clarinet sound will always be there. In other words, his processing is only an addition to the original sound. I was recommended the v