Yahoo Groups archive
Messages
Page 286 of 564 · 28179 messages matched
2007-12-15 by levka0
David, it is a matter of personal taste, but IMHO you may indeed consider replacing the A-114 as well. Replacing the A-145 with an A-143-3 may also add versatility to your system. If you use the A-106, the A-138 may remain unused in many patches regards Joost --- In Doepfer_a100@
2007-12-15 by Denis Gökdag
this depends on what you think of as "better". the 111 is somewhat cleaner sounding and can be used at higher frequencies more reliably. it features soft-sync and linear FM (but you can "hack" a 110 to sport these features too, they're available on the PCB). the 110 on the other
2007-12-15 by jalmari3
--- In Doepfer_a100@yahoogroups.com, "Tim Stinchcombe" wrote: > The old motto is well heeded: if in doubt, don't! Thank you. I guess I won't then. If anybody is interested, due to PCB sticking outside faceplate the RS230 can't be put to left from any Cwejman module, Doepfer multi
2007-12-15 by p. hendricks
nice! and thanks Peter! so what else are you all doing with the a144? seems like it was sold for the VC-Mixer but, there should be a lot of other cool tricks with this one. I have one and not the mixer, and like the 144 and have had some random fun with it, I guess as almost a ra
2007-12-15 by Mark Pulver
Well Understood... :) Something to keep in mind though is that the modules fit will into a PAiA or Blacet chassis, though you'll need a drill to rework the holes in the rails. I have a good number of Doepfer modules, and not a Doepfer chassis in site. ref: http://blacet.com/store
2007-12-15 by David Bulog
Easier said than done--used ones never appear on the market and a new one is very pricey with shipping On 15/12/2007, at 2:19 PM, Mark Pulver wrote: > > Replace nothing... > > ...buy another rack and keep adding. :) > > --------- > David Bulog (05:11 PM 12/14/2007) wrote: > >I ha
2007-12-15 by Mark Pulver
Replace nothing... ...buy another rack and keep adding. :) --------- David Bulog (05:11 PM 12/14/2007) wrote: >I have bought a used A100 mini system in an A-100G3 rack >http://www.doepfer.de/a100_man/A100_System_Mini.htm > >A-110 Standard VCO >A-114 Dual Ringmodulator >A-118 Nois
2007-12-15 by David Bulog
How much better is the High-End VCO compared to the standard thanks David
2007-12-15 by David Bulog
http://www.doepfer.de/a107.htm Sorry poorly worded question before is the quality of the A-107 module good compared to Oberheim Matrix 12 which sounded a bit to thin amd digital to my ears thanks David On 15/12/2007, at 8:59 AM, David Bulog wrote: > This lots really interesting--
2007-12-15 by David Bulog
I have bought a used A100 mini system in an A-100G3 rack http://www.doepfer.de/a100_man/A100_System_Mini.htm A-110 Standard VCO A-114 Dual Ringmodulator A-118 Noise/Random A-120 VCF1/24dB Low Pass 1 A-131 VCA logarithm. A-138b Mixer logarithm. A-140 ADSR Envelope Generator A-145
2007-12-15 by (i think you can figure that out)
http://www.ear-group.net/A144LEDS.jpg
2007-12-15 by (i think you can figure that out)
All, We made a delivery at Analogue haven this afternoon, felt I had earned a treat and picked up one of these guys. Always wanted one. I went ahead and added LEDs to the four phase outputs this afternoon. A pretty easy procedure which I though some of you might appreciate. This
2007-12-14 by David Bulog
This lots really interesting---can any members give me a review thanks in advance David
2007-12-14 by Tim Stinchcombe
> What happens, if the solder joints of a module touch the cabinet wall? At best, it will probably make the module not function correctly; at worst it could badly damage the module and/or blow a fuse (or worse) in the power supply. If you value your module at all, make sure that
2007-12-14 by ilanode
Instead of upside or the cabinet wall couldn't it be placed between 2 other modules? --- In Doepfer_a100@yahoogroups.com, "jalmari3" wrote: > > What happens, if the solder joints of a module touch the cabinet wall? > > I ask, because I would like to place Analogue Systems RS230 (
2007-12-14 by jalmari3
>> - A-113 and A-190 are in the same row/power rail. > Sorry, that's not possible as only one A-100AD5 is allowed for each bus board. Hmm... I guess I could still put both A-113 and A-190 into (say) the upper row, if I get power for the other module from the lower bus board (with
2007-12-14 by Florian Anwander
Hi one could add a larger cooling device to the regulator, but I assume this would cause mechanical problem in transport (too much mass). Florian selfoscillate wrote: > hello chuck, > > only one ad5 is allowed per row. > as long as the total 5 volts consumption of the modules > d
2007-12-14 by Ancient Eyeball Recipe
Excellent condition I¹ve been stupid and need to round up some $. Sells new for $290. I¹ll ship it to you (continental US) for $235. I also have the a-171 vc slew limiter, a-118 noise/random voltage, a-138 mixer, a-138c polarizing mixer up for grabs too rushed at the moment t
2007-12-14 by jalmari3
What happens, if the solder joints of a module touch the cabinet wall? I ask, because I would like to place Analogue Systems RS230 (with new mounting holes drilled) to the rightmost position in a A-100G6 cabinet. By moving the threaded rails to left as much as possible, I could d
2007-12-14 by charles graef
Sorry, I'm confused -- you're saying that the A-100AD5 will only permit one 5V module in the row in which it's installed? --Chuck -----Original Message----- From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of hardware@doepfer.de Sent: Friday, Dec
2007-12-14 by jalmari3
Thank you for the quick replies. Best regards Jari Jokinen --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hi > > one could add a larger cooling device to the regulator, but I assume > this would cause mechanical problem in transport (too much mass). > > Florian
2007-12-14 by hardware@doepfer.de
> I have two 5V Low-Cost Adapters (A-100AD5). I have previously used them > with A-113 and A-190 installed in separate A-100G6 cabinets. > > Now I am going to put A-113 and A-190 into same cabinet. Looking at the > power consumption figures it appears, that two A-100AD5 are still
2007-12-14 by selfoscillate
hello chuck, only one ad5 is allowed per row. as long as the total 5 volts consumption of the modules doesn't exceed 100ma you can use more than 1 module with the ad5. in the example below (a113 and a190) the 5 volts consumption is 150 ma, therefore you need two ad5. best wishes
2007-12-14 by jalmari3
I have two 5V Low-Cost Adapters (A-100AD5). I have previously used them with A-113 and A-190 installed in separate A-100G6 cabinets. Now I am going to put A-113 and A-190 into same cabinet. Looking at the power consumption figures it appears, that two A-100AD5 are still needed. J
2007-12-13 by gabu_004
Excellent! Thanks! g. --- In Doepfer_a100@yahoogroups.com, wrote: > > > Hello, > > > > My dear A124 just died the other day... :_( > > I was wondering anybody knows what kind of test I can do and how > > to do them to see what > > componnent is not working and maybe just end up r
2007-12-13 by galadrielbeebnet
Incredible new Video Display module on eBay! Item no. 320196205400 Just time to treat your A-100 to one of those little b&w portable TV sets too, and have it making amazing oscilloscope and waveform patterns by Christmas! Only time to ship one of these before the holidays - more
2007-12-13 by hardware@doepfer.de
> I can't find a good reference for what the ribbon cables should be > connected to in order to just run an A-155 Trigger Sequencer (no A-154). > > Is there a good reference somewhere or could someone tell me exactly > what kind of ribbon cable plugs into what socket to run just
2007-12-13 by hardware@doepfer.de
> Hello, > > My dear A124 just died the other day... :_( > I was wondering anybody knows what kind of test I can do and how > to do them to see what > componnent is not working and maybe just end up replacing it > instead of buying a new one! > > thanks > > g. The only thing you
2007-12-13 by Florian Anwander
Hello Nicholas owners manual of A-155 and A-154 (the latter describes what is changed with a standard A-155 if once used with a A-154). http://www.doepfer.de/a100_man/a154_man.pdf http://www.doepfer.de/a100_man/A155_man.pdf regards, Florian nicholas_kent wrote: > I can't find a g
2007-12-13 by nicholas_kent
I can't find a good reference for what the ribbon cables should be connected to in order to just run an A-155 Trigger Sequencer (no A-154). Is there a good reference somewhere or could someone tell me exactly what kind of ribbon cable plugs into what socket to run just an A-155?
2007-12-13 by gabu_004
Hello, My dear A124 just died the other day... :_( I was wondering anybody knows what kind of test I can do and how to do them to see what componnent is not working and maybe just end up replacing it instead of buying a new one! thanks g.
2007-12-13 by Florian Anwander
Hi Anthony > DR-110 DIN/ Clock out->A-160 Clock Divider->divided clocks out to various modules. Be aware, that as every counter the A-160 is in the resetted state in position 1. The first incoming clock advances the counter to the next step (means: /2 will raise or at A161 it wil
2007-12-13 by hardware@doepfer.de
> I was wondering if it were possible to direct couple the A-112 so > as to use it to record and playback control voltages, > modulations, lfos etc... > > Thanx, > > Tony The input of the A-112 is already DC coupled. For DC coupling of the output one has to short the 100nF capaci
2007-12-13 by hardware@doepfer.de
> I just added to DIN sync IN and OUT to my Boss DR-110. > > On my scope the DR-110 CLock appears to be a perfect square wave, 0-5V. > > HOWEVER, when I use this as a master to run clocked modules > (within my Doepfer system), everything seems off... Maybe it's the clock spec of
2007-12-13 by David Bulog
Is there anyone that can share some mp3 of work they have done with A-112 please send file via yousendit.com to d2ba@xtra.co.nz thanks Dave On 12/12/2007, at 6:02 AM, John wrote: > I brought up OS X compatibility through a Windows emulator (Parallels > Desktop) a couple of months
2007-12-12 by Anthony Rolando
I was wondering if it were possible to direct couple the A-112 so as to use it to record and playback control voltages, modulations, lfos etc... Thanx, Tony > To: doepfer_a100@yahoogroups.com > From: goldenechos@hotmail.com > Date: Wed, 12 Dec 2007 13:57:41 -0500 > Subject: [Doep
2007-12-12 by Anthony Rolando
I just added to DIN sync IN and OUT to my Boss DR-110. On my scope the DR-110 CLock appears to be a perfect square wave, 0-5V. HOWEVER, when I use this as a master to run clocked modules (within my Doepfer system), everything seems off... The set-up is as follows: DR-110 DIN/ Clo
2007-12-12 by Florian Anwander
Hi, I am looking for a "EES MIDI CV 7" MIDI/CV-interface. I am in the european union, but world wide offers are welcome. Florian
2007-12-12 by Thomas Garrison
Hello, I have a few more modules that I'm willing to part with. They are all in excellent condition and work perfectly. Please email me at garrgal@pacbell.net with offers or any questions. I will ship worldwide. The modules are: Doepfer A-127 Triple Voltage Controlled Resonance F
2007-12-11 by John
I brought up OS X compatibility through a Windows emulator (Parallels Desktop) a couple of months ago and the general consensus was that it would not work. I should try and fiddle with it anyway but I¹ve been too busy. It seems like we shouldn¹t expect OS X compatibility unless t
2007-12-11 by galadrielbeebnet
New triple oscillator on eBay Item No. 320194497346 Treat your A100 to a Christmas present... Use PayPal today for mailing tomorrow (Wednesday 12th)
2007-12-11 by Anthony Rolando
Yes, I agree. the module is useful without access to a Windows machine, PC. It makes a great phrase sampler/ looper. Very quick to set the loop points, you can modulate the sample rate for cool effects etc... In my opinion, the module is harder to use then the Blacet Miniwave, bu
2007-12-11 by jmaddocks1975
Yes, the module is usable without a PC. You can record sounds striaght in using the audio in socket, the effects and wavetable side is usable with a PC too. You only need the software to upload 'edited' samples and proper wavetables. I wonder if any other software works with the
2007-12-11 by David Bulog
thanks John Is this usable without a PC then? On 12/12/2007, at 2:01 AM, jmaddocks1975 wrote: > I wanted a mac version too but couldn't find anything. I've > seen 'virtual PC' software so you can run windows software on macs, > not > sure how stable they are though, anyone used o
2007-12-11 by jmaddocks1975
I wanted a mac version too but couldn't find anything. I've seen 'virtual PC' software so you can run windows software on macs, not sure how stable they are though, anyone used one? http://www.microsoft.com/mac/products/virtualpc/virtualpc.aspx? pid=virtualpc The A112 module is a
2007-12-11 by David Bulog
Is there any program I can use on OSX 10.4 Intel to do sample dumps into a A-112 Sampler I notice there is only one for Win 95 and Win 98 How useful is this module in general thanks in advance Dave
2007-12-11 by David Bulog
Im surprised that Roland does not make a limited production run of the TB-303 again They are selling for US$2000 on ebay On 11/12/2007, at 11:28 PM, wrote: > > very interesting, thanks for the links. > > > > i cannot recall exactly from where i got the info, but > > i think that
2007-12-11 by hardware@doepfer.de
> very interesting, thanks for the links. > > i cannot recall exactly from where i got the info, but > i think that also the slide circuit is somewhat unique. > a special ic was used for this, which is unavailable > for many years now. but again i cannot recall what > made it spe
2007-12-11 by ilanode
That does not indicate that they could sell a sufficient number of them. A Roland employee once made clear in Analogue Heaven that for a large company like Roland it is not economical to serve a niche market. --- In Doepfer_a100@yahoogroups.com, David Bulog wrote: > > Im surprise
2007-12-11 by Thomas Garrison
Hello, I'm selling my mint condition Doepfer A-155 sequencer. I would like to get $300 for it and that will include free shipping. I will ship worldwide. Please email me at garrgal@pacbell.net with offers or any questions. Thanks for your time. Take care, Thomas [Non-text portion