Yahoo Groups archive
Messages
Page 307 of 564 · 28179 messages matched
2007-06-17 by magneteyez
I have built myself a cabinet for my doepfer modular.Two powersupplies (one psu II and one PSU I) have to supply the power for the modules. After connecting all modules with the busboards and PSU some modules won`t work. When I put these modules in my G6-case they work as they sh
2007-06-16 by Ross Goniakowski
i have an older PS that does not hum, but i understand some do...i have a newer one as well and it's fine too...when i was putting together my second rack, i bought a used back panel, but returned it as it had no fuse holder, and i figured i really didn't need it as i was putting
2007-06-16 by nicholas_kent
I picked up what I believe is an older 230v G6 frame. The NT12 PSU says "REV 2" on it. I noticed the PSU hums slightly. Though I also noticed one of my other G6 frames sounds about the same. But a third NT12 frame I have is quieter. So I just thought I'd ask if it's a concern. Th
2007-06-16 by Mickey Finn
Cheers- a small plug for a free album on my band's/project website- The new trick "Honey Sacrifice" website is online- In the mood for some Dark Noir-Heroin-Jazz? with tons of my Doepfer modular- then download some or all of the tracks from "Nights in Columbus" the first album. A
2007-06-14 by Florian Anwander
Hi little mistake in my schemoe: the resistor to 12V has to be 1k, the resistor to Ground has to be 10 k Florian
2007-06-14 by Florian Anwander
Hi Stu > @ dieter: that's more or less what i'm looking at - bending the 160/161 to run from a > subdivision of the input to the 160, i.e. one of the 160's outputs. if i can manage that, > then i'd like to try to get two 161s running at different speeds. > > if i can reset them s
2007-06-14 by hardware@doepfer.de
Please look at my message from June 04, 2007 for details. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Stu Grimshaw > Gesendet: Donnerstag, 14. Juni 2007 15:47 > An: Doepfe
2007-06-14 by Stu Grimshaw
@ dieter: that's more or less what i'm looking at - bending the 160/161 to run from a subdivision of the input to the 160, i.e. one of the 160's outputs. if i can manage that, then i'd like to try to get two 161s running at different speeds. if i can reset them separately too - t
2007-06-14 by plastichorneddevil
Thank you gentlemen! This sequencer appears to have some other issues I need to look into. Im going to get a voltage adapter this morning to see if it works properly in the 220v case it came with. I have had absolutely no problems with my A-155 sequencer, I just love it. It would
2007-06-14 by Bakis Sirros
but only assuming that the Oberkorn needs only 100ma in the +5volts supply. it would be better to ask Tom Carpenter about the +5volts current draw of the Oberkorn. best regards, Bakis. --- atuzzi wrote: > > > --- In Doepfer_a100@yahoogroups.com, > "plastichorneddevil" > wrote: >
2007-06-14 by hardware@doepfer.de
> p.s. @ dieter: how about a bus connection on the 161 for a second 161 running from the same 160 ? That's easy. You simple need a 10 pin cable with 3 female connectors (one for the A-160, one for A-161 #1 and one for A-161 #2). But I cannot see an application for this purpose. T
2007-06-14 by atuzzi
--- In Doepfer_a100@yahoogroups.com, "plastichorneddevil" wrote: > > Oberkorn sequencer in a > Doepfer case... yep, you need a 5 Volts miniconverter/adapter... look for "A-100AD5" in page http://www.doepfer.de/a100z_e.htm at
2007-06-14 by Bakis Sirros
probably, the oberkorn needs a +5volts supply that the doepfer case does not have as standard, but the analogue systems case has. best regards, Bakis. --- plastichorneddevil wrote: > Hello there, sorry to butt in with my personal > problem, but I seem to > have some sort of issue
2007-06-14 by plastichorneddevil
Hello there, sorry to butt in with my personal problem, but I seem to have some sort of issue trying to put an Oberkorn sequencer in a Doepfer case. The sequencer just wont do its thing unless its plugged into my Analogue Systems case. Is there some sort of power issue hanging up
2007-06-13 by Florian Anwander
Hi Stu > an a-161b which resets to step 8 would be a useful alternative for me. The most simple way is: use socket 8 as 1, socket 1 as 2 and so on. No b-version module required. > p.s. @ dieter: how about a bus connection on the 161 for a second 161 running from the > same 160 ?
2007-06-13 by Stu Grimshaw
hi all, pardon my butting in at this late stage but: the suggestion to reset to the last step seems to have passed unnoticed. i'm looking at this from a slightly different perspective, in that i'm only using a 160/161 combo, but the behaviour of the 161 is also a headache in this
2007-06-13 by Stu Grimshaw
pierre, i was in the same not-sure-for-what situation, and decided to ease myself into analogue sequencing with a 160/161 combination, thus saving 1) loads of money and 2) loads of space. i was also more interested in control than notes. limited, i know, but very much less so tha
2007-06-13 by Florian Anwander
Add on: I don't know how the "start"/"stop" handles the clock in the actual design. But my suggestion requires for external clock also that "stop" disables the clock itself, or (if this is not good for some reasons) "stop" has to disable also the divider in my example. This requi
2007-06-13 by Florian Anwander
Ok, I think, I've got it: The core is an RS-Flipflop, which is controlled at SET by the halftime clock (dived by 2) and by the the Stop trigger at RESET. The Q-Out controls an AND which enables the Clock: Clock---------+------------------\ | | Start---Reset-x/2 \--AND | ...... AN
2007-06-13 by Florian Anwander
Hi Dieter we do not want to have this, because a reset while playmode would show the same behaviour. This "wait for second step"-behaviour should only be shown if the reset comes while stop mode or at the didentical moment with the start-trigger. I think this requires some RS-Fli
2007-06-13 by hardware@doepfer.de
I will see if there is a chance to add another switch to the A-154 but from the first glance this will be a problem as there is no space at the front panel left and all port inputs of the microcontroller are used. Maybe a special control setting (e.g. first step fully clockwise)
2007-06-13 by hardware@doepfer.de
As far as I remember the A-154 resets to the step defined by the "first step" control. But I'm not 100% sure. Unfortunately I have no A-154/A-155 available to try it out. My complete demo system has been sold and I'm about to arrange my new "private" system. Best wishes Dieter Do
2007-06-13 by hardware@doepfer.de
> there are counter ICs that after receiving a reset pulse will wait > with incrementing their state untill they receive the next clock pulse . Denis, very interesting. Can you tell me the name of this counter circuit. Maybe we could do a redesign of the A-155 controller board. N
2007-06-13 by verstaerker
i think it's a bit confusing for users that both devices react differently what about a switch on both devices to switch between both behaviours > The problem has been solved with the A-154 as controller for the A-155. A > reset "prepares" the internal logic for the "real" reset.
2007-06-13 by Florian Anwander
Hi > behaviour to that described in the initial post. If you hit reset > whilst the sequencer is running it will actually play step 2 as the > first note. I think, this is occasionally - its a question of timing. You may check what happens if you feed the reset from a trigger out
2007-06-13 by Adam-V
OK I have had time to check this out and found the following: With the A-154 in Forward mode, pressing reset causes the sequence to start from step 1 on the next clock cycle if the sequence is running or on the next press of the start button if it is stopped. With the A-154 in Re
2007-06-12 by Adam-V
It should be the latest version, I only received it from Doepfer on Friday. I'll have to double check the behaviour when I get home from work tonight but I'm certain was mine starting at step 2 when reset was pressed while the sequence was running. It does stay on the current ste
2007-06-12 by verstaerker
What??? My 154 just stops on the actual step and when i start again - it starts at One also pressing reset during playback goes back to One Do u probably have an old version of the 154!? > I have just installed an A-154 into my system and noticed similar behaviour to that describ
2007-06-12 by Adam-V
I have just installed an A-154 into my system and noticed similar behaviour to that described in the initial post. If you hit reset whilst the sequencer is running it will actually play step 2 as the first note. I have heard that this is a problem with many sequencers too though.
2007-06-12 by Pierre Zeeman
Florian, Bit disappointed that the graphic vco is not up to much. Still, totally agreed about the a137: it's one of my favourite modules. Charlie, I was looking for something that would fit in my rack, but perhaps it might be a better idea to get something like the oberkorn and s
2007-06-12 by Denis Gökdag
Then you could build your own counter module and replace the one in the 155. there are counter ICs that after receiving a reset pulse will wait with incrementing their state untill they receive the next clock pulse . this is obviously also a lot of work, but you could get an IC w
2007-06-12 by Florian Anwander
Hi Denis > you could use a CV adressing the steps; draw a stepped controller > curve in your DAW sequencer. In german we call this: "shoot with a cannon to a sparrow". And honestly: I try to avoid to switch on a computer when making music... Florian
2007-06-12 by hardware@doepfer.de
> Hi, > > playing with my A-155 the last days the problem/question arose again: > If I do stop and reset. The reset jumps to step 1. The first clock after > start makes it to advance to step 2 with the first note. > > Ok, I could think step 2 as first, but if I want to use the re
2007-06-12 by Denis Gökdag
oh man, sorry, confused 155 and 154 On 12. Jun 2007, at 1:34 PM, Denis Gökdag wrote: > you could use a CV adressing the steps; draw a stepped controller > curve in your DAW sequencer. > > only works for certain situations, though. > > denis > > Hi Silas > > > > > using existing m
2007-06-12 by verstaerker
good point ;) > > > > > > Hi > >> just a question- why don't u use an A-154 - it doesn't have this problem > Because I have no need of the (other) features of the A-154; and > spending extra 170 Euros for only to get a start/stop/reset behaviour > that I would expect by default?
2007-06-12 by Florian Anwander
Hi > just a question- why don't u use an A-154 - it doesn't have this problem Because I have no need of the (other) features of the A-154; and spending extra 170 Euros for only to get a start/stop/reset behaviour that I would expect by default? Florian
2007-06-12 by Denis Gökdag
you could use a CV adressing the steps; draw a stepped controller curve in your DAW sequencer. only works for certain situations, though. denis > Hi Silas > > > using existing modules. I think the least hard way to get the > effect that > > you want is to send a reset pulse simul
2007-06-12 by verstaerker
just a question- why don't u use an A-154 - it doesn't have this problem > > > > > > Hi Silas > >> using existing modules. I think the least hard way to get the effect that >> you want is to send a reset pulse simultaneously with the first clock pulse. > This was my first try, bu
2007-06-12 by Florian Anwander
Hi Silas > using existing modules. I think the least hard way to get the effect that > you want is to send a reset pulse simultaneously with the first clock pulse. This was my first try, but it does not work. I even tried to delay the reset trigger. Florian
2007-06-12 by Silas Johansen
I don't think there's an easy solution to this problem, or at least not using existing modules. I think the least hard way to get the effect that you want is to send a reset pulse simultaneously with the first clock pulse. You could use an A160 to make sure that the sequencer got
2007-06-12 by Florian Anwander
Hi, playing with my A-155 the last days the problem/question arose again: If I do stop and reset. The reset jumps to step 1. The first clock after start makes it to advance to step 2 with the first note. Ok, I could think step 2 as first, but if I want to use the reset while the
2007-06-12 by Florian Anwander
Hi Pierre If you sent an audio rate > signal, it would take eight cycles of that signal to replay the whole > 'waveshape' drawn by the knobs. So there'd always be an eightfold frequency > discrepancy between the incoming and outgoing signals. Correct? Or am I > completely off the
2007-06-12 by charles kerr
Hi Pierre, I don't have either of those sequencers, but there are other alternatives; Analogue Systems do a quite nice sequencer, as do Analogue Solutions. Analogue Solutions do the Oberkorn which seems pretty highly spec'd, and they talk a bit about audio freq stuff on their sit
2007-06-12 by Pierre Zeeman
Hi all, I've always been tempted to add a sequencer to my modular and have a few questions. I'm not really interested in using it to sequence notes but I am very interested in the modulation possibilities it affords. Aside from the obvious stuff, I've seen it mentioned that it co
2007-06-12 by Adam-V
Thanks Dieter, mine was actually supplied with an A-B cable rather than an A-A cable hence my question. I managed to find the right cable at a local computer store so it's all sorted out now. Cheers, Adam-V --- In Doepfer_a100@yahoogroups.com, wrote: > > The ribbon controllers (R
2007-06-11 by hardware@doepfer.de
Dear members, thank you. The module will manufactured a.s.a.p. I assume that the new "simple module series" (switched multiple, gate/trigger combiner, precision adder/bus access, manual gate version 2) will be available fall 2007. We still have to make some investigations as anot
2007-06-11 by hardware@doepfer.de
The ribbon controllers (R2M and A-198) are delivered with an A-A cable from the factory (we have no other cables in stock). Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Ada
2007-06-10 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you want Doepfer to manufacture a Gate/Trigger Combiner module? (as Dieter Doepfer says: "A module for the combination of gate/trigger signals could be realized much easier without act
2007-06-08 by Bakis Sirros
hello all, Parallel Worlds - "Obsessive surrealism (DiN26) cd album review from Morpheus music (www.morpheusmusic.co.uk ): "STYLE: Moody electronica with strong structures and deep atmospheric backdrops. Obsessive Surrealism delivers eleven melodic synthesiser tracks where low ke
2007-06-08 by Adam-V
OK Thanks. I just wanted to be sure it was standard USB cable and not a proprietary one first. Cheers, Adam-V --- In Doepfer_a100@yahoogroups.com, Ross Goniakowski wrote: > > they have adaptor kits at the local Walgreens or Radio Shack around here... -----------------------------