Yahoo Groups archive
Messages
Page 433 of 564 · 28179 messages matched
2004-08-24 by ps_minor
> a127 triple resonance filter > ---------------------------- > also a very good sounding filter. > great for filter animation. i recommend > switches on the front panel to select > between lowpass and bandpass, far better > than using the dip-switches on the pcb. > sounds awesom
2004-08-24 by selfoscillate
> a120 moog 24db lowpass > ---------------------- > i can't recommend this filter. mine is > from 1995, it sounds good but the input stage > is weak, no overdrive is possible. > the a108 is far better in any case. > > > a121 cem 12db multimode > ----------------------- > nice fil
2004-08-24 by selfoscillate
hello bakis, yes i think i will do that also. how did you make it with the cable? do i have to drill a hole into the back of the frame? best wishes ingo --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > hello ingo, > btw,i have relocated my two a199 spring reverb units >
2004-08-24 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "thomasborax" wrote: > hi folks. my questions in the past have all been answered in a > helpful mannner, thank you to all on this list. > here's today's queries: > > the a108 filter. this seems like a good one for me. however, i > currently ha
2004-08-24 by p.hendricks
On 8/23/04 2:48 AM, "garrgal@pacbell.net" wrote: > Hello. > > I have been searching for information about building a Doepfer > system but I haven't found the information I need. I have a few devices > that produce analog VCOs and I have some filters as well (nothing from > Doepfe
2004-08-24 by selfoscillate
> also a i wonder about the spring reverb unit. is this worth looking > into? i've heard some units with very short springs, and they > didn't sound so cool. do any of you feel that this has been a good > unit for depth, spashy verb and other effects? > > thanks to those who repl
2004-08-24 by selfoscillate
hello rob, the a133 multiplies by factor -2.5 to +2.5, which means that f.e. +3 volts and be amplified to something between +7.5 or -7.5 volts. but you can also order it with a multiply-factor of -5 to +5. the maximum output voltage is limited to something around 12 volts i guess
2004-08-24 by Rob Adams
The Doepfer website says +/- 2.5 volts. I need it to be +/-5... Thanks, Rob --------------------------------- Do you Yahoo!? Win 1 of 4,000 free domain names from Yahoo! Enter now. [Non-text portions of this message have been removed]
2004-08-23 by Zoran Bosnjak
Hi Thomas, this is my favourite subject: filters! And even better: I will not hide what I liked about four filters I owned from Doepfer! So, let's start my completely subjective comment. First: mighty A-108. Description: fat, but not Moog warm. It reminds me on Roland System 100
2004-08-23 by levka0
Hi Thomas, I tend to agree mostly with zoran A-102: resonance range is not optimal; hard to fine-tune (A.Sol. RS500e is much more to my liking ; but it's price is almost double) A-109: nice alround filter, but I generally prefer 12db over 24db slopes. Really appreciate the built-
2004-08-23 by mritenburg
> understood that the a108 can be overdriven to make dirty sounds. Any filter can be overdiven. Just exceed the headroom of the circuit and with your signal and: viola! distortion. Of course, the subtle characteristics of the distortion are dependant on many factors. You can also
2004-08-23 by thomasborax
hi folks. my questions in the past have all been answered in a helpful mannner, thank you to all on this list. here's today's queries: the a108 filter. this seems like a good one for me. however, i currently have the Asol sy01 w/ moog ladder 24db lpf. i must say it is dull, borin
2004-08-23 by stuadh
Moran tang to all who answered. Very kind. By the sounds of it, The RS70 and A119 aren't too dissimilar, and the extra money for the RS70 goes towards your Inverter and Slew. I take the point that neither is the best sig amp around, but I don't intend for any signal passing throu
2004-08-23 by synth_freak_2000
hello pierre, please,could you retry uploading your algoart layout update files? thank you, bakis.
2004-08-23 by Guilherme da Luz
Hi Thomas I think the a-126 frequency shifter is a special one for you, very noisy and screaming eventually connected with other modules ex.lfo, rndm, noise generator etc. The ring modulator a-114 for very bizarre sounds. The a-101.3 a-127 for non conventional and really complex
2004-08-23 by Tommy DOG
Although I have had only some limited time to spend with this module, I like it and find that I have no trouble using it to trigger events with a guitar. Is this the best in the world, probably not BUT I couldn't tell you what is AND I am very happy to have added this to my syste
2004-08-23 by Bakis Sirros
hello thomas, more recommendations for wierd/unusual noise producing modules: a117 digital noise a118 noise/random a136 distortion/waveshaper a137 wavemultiplier a127 frequency shifter a107 morphing filter a101-3 modular vactrol phaser a199 spring reverb a196 pll a155 sequencer i
2004-08-23 by Florian Anwander
Hi Stuadh > I anyone out there particularly happy/dischuffed with the A-119 > who would like to comment on it? two cents: 1.) The soundquality is ok for the price. Preprocessing (EQing, audio compression) of instruments signals can be recommended. I you have enough modules, you c
2004-08-23 by sahkopostiosoite
Doepfers ahoy! While I was doing a inventory at my place I stumbled across the couple of the last records that are left of my old CDS release 'Koottava'. I figured that as I have only so few left I might as well put the record out as Mp3s for everybody to enjoy. The record has be
2004-08-23 by Julian
I actually suspect that the umber of people who start with the BS1 and BS2 are relativly few. Its by no meens essential. As for midi. I have a doepfer midi cv unit, so im not saying bad about doepfer per-se, but i personally wouldnt choose the a-190 for my system. Basicaly what y
2004-08-23 by garrgal@pacbell.net
Hello. I have been searching for information about building a Doepfer system but I haven't found the information I need. I have a few devices that produce analog VCOs and I have some filters as well (nothing from Doepfer, just separate analog units). My question is do I really ne
2004-08-23 by selfoscillate
hello thomas, difficult question. do you want to use your modular mainly as a synth or do you want to process external signals? can you give some details on the desired sound you want to achieve? you know, in a modular you can use the modules in very different ways. if you have e
2004-08-23 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "stuadh" wrote: > I've read a number of threads complaining about the ability of > the A-119 to do its job. I've been thinking about getting one, > primarily to route signals from My Akai S2000 and from my > soundcard output into the Integrato
2004-08-22 by Anders Ehlin
Hi everyone! Back from a hard weekend without a single trace of www I haven't been able to respond to your input. Anyhow I just wanted to say thanks a lot to you all coming with feedback on my questions re Doepfer/Integrator, filters anc VCOs etc, this is truly a great forum! I'l
2004-08-22 by (i think you can figure that out)
All, I am helping a customer out who has had to cancel an order for two Plan B Model 15 VCOs which were purchased in the the intro price offering of $225 each. I will honor this original sale price for these two units. Please contact me off line. info here: http://www.buzzclick-m
2004-08-22 by Bakis Sirros
hello stuadh, yes,it is good and i have four of these!for me it works fine, and i use it's envelope follower and gate detector all the time.ok,the a119 is a bit noisy only if you want to pre-amplify signals a lot,but for small amplifications it is fine.and small amplifications is
2004-08-21 by ps_minor
> > I anyone out there particularly happy/dischuffed with the A-119 > who would like to comment on it? ok i hate to complain but this is the one doepfer module i had problems with. the EF works 'ok' but the sound quality of the amplifier section is disappointing by even the most
2004-08-21 by stuadh
I've read a number of threads complaining about the ability of the A-119 to do its job. I've been thinking about getting one, primarily to route signals from My Akai S2000 and from my soundcard output into the Integrator/Doepfer synth. I am also interested in the envelope followi
2004-08-20 by Zoran Bosnjak
Hi everybody, thank you for advice I received. Since I am waiting for Complex Envelope Generator and Doepfer version of MS-20 filter, I decided to go for Source of Uncertainty. Can't wait to try "tail-chasing", whatever that is :-) Regards Zoran P.S. There was a lot of talk about
2004-08-20 by Tim Stinchcombe
> Am I correct in assuming that since the A-121 multimode filter's lowpass > and highpass have a -12dB slope, the slopes of the bandpass and notch > filters are -6dB per side? The A-121 is basically the standard two-pole state-variable filter built around a CEM3320 chip, so yes,
2004-08-20 by Tommy DOG
--- In Doepfer_a100@yahoogroups.com, "Zoran Bosnjak" wrote: > 1. A-133 Dual Polarizer > 2. A-149-1 (SOU) > 3. A-174 Joystick > 4. A-123 Hi-Pass Well Zoran, it's a tough call because people have different wishes for a modular. I guess you have to choose sound vs control. Which is
2004-08-20 by Bakis Sirros
hello anders, yes,the system-100 i think it can cooperate fine with the a100.i already crosspatch between the two some times. the only thing to watch is that the roland gate outputs send a voltage of about 15volts to trigger their envelopes.but,i think the a100 inputs can take up
2004-08-20 by Bakis Sirros
hello pierre, ok,i have removed some files and moved some photos to the photo section.now you have more than 4 mb's free file space!please upload your algoart update! thank you, bakis. ===== Bakis Siros Parallel Worlds / Polariton Athens-Greece [Doepfer_a100] group owner http://w
2004-08-20 by Bakis Sirros
hello pierre, ok,i'll delete some files that don't seem to important(i hope). i'll let you know very soon to re-try uploading your update. thank you, bakis. --- Pierre Zeeman wrote: > Bakis, > > I have made the necessary changes. Only problem is > - I can't upload it > because it
2004-08-20 by Pierre Zeeman
Bakis, I have made the necessary changes. Only problem is - I can't upload it because its size exceeds the remaining space for files... rgds Pierre _________________________________________________________________ Highlight key phrases on any Web page - download MSN Toolbar! http
2004-08-20 by Pierre Zeeman
Hi, I also have an integrator (their basic system - it's what started me off into this mad modular world) and then I have a 6u a100 system as well. I also have a voyager and a moogerfooger phaser (and i'm getting a MuRF soon) so perhaps I am qualified to speak about these too. My
2004-08-20 by Bakis Sirros
hello florian, i already have the a101-1 vactrol steiner-parker prototype2 filter module in my a100 and use it!i can confirm that it has a special sound!i think it is a filter with a real individual personality(just like the wasp a124 filter has). bakis. --- Florian Anwander wrot
2004-08-20 by Florian Anwander
Hi Zoran > So, is positioning Doepfer A-123 before A-108 (with some > careful resonance adjusting on both) going to bring out beauty and > wierdness, just like on MS-20? (I am not expecting this combination to sound > like MS-20, just to result in something sounding very nice). >
2004-08-20 by David Salter
A133 only 'cos I have the others already ; ) David Salter Reuters Ltd UKI Project Management Tel. +44 207 542 2402 Fax. +44 207 542 2699 Email. david.salter@reuters.com Reuters Messaging. david.salter.reuters.com@reuters.net -----Original Message----- From: Zoran Bosnjak [mailto:
2004-08-20 by Bakis Sirros
hello ingo and friends, ok,i have,as you know,both a111's and a110's and AS rs95's.if i had to choose one of the three, i would go for the a111! why? not for the sound,but because of the awesome linear FM capability!this feature can make sounds that no other vco that i have can c
2004-08-20 by levka0
Hi I often use two A-121's, feeding the HP out from the first and taking the LP from the second into an A-116 WP before it goes to the VCA When cascading two filters, I generally prefer 12db slope filters over 24 db ones regards Joost --- In Doepfer_a100@yahoogroups.com, Florian
2004-08-20 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "Anders Ehlin" wrote: > Yeah that's allways an idea, after all Stockholm is supposed to be a big > city even if I wonder more than once, but someone out there should have some > kind of system that could perform decent! > Regarding your Minimo
2004-08-20 by selfoscillate
hello zoran, which filter do you have in that system? best wishes ingo --- In Doepfer_a100@yahoogroups.com, "Zoran Bosnjak" wrote: > > Hi, > > if you had money for only one module to fit into your Doepfer that has all > necessities covered (3 VCOs, filter, 3 ADSRs, 2 LFOs, 2 mixe
2004-08-20 by selfoscillate
> > FWIW a friend of mine who has a small Blacet system came up for a visit > awhile back, and remarked about how much he prefers the sound of his > Blacet VCOs to my RS90s. I haven't had much time on a Blacet system, but I > intend to now ;0) > > It really comes down to personal
2004-08-20 by selfoscillate
nice, the waveforms look pretty perfect, even the sinewave. --- In Doepfer_a100@yahoogroups.com, "(i think you can figure that out)" wrote: > I have uploaded photographs (albeit cr@ppy) of the output > waveforms of the Model 15 prototype. > > Go here: > > http://www.buzzclick-mus
2004-08-20 by selfoscillate
> So anyway, would you concider the AS VCOs and VCFs superior to Doepfer's? I > know this is one of the most subjective areas, hard to say before you can > actually hear them side by side... (guess its like the mac/pc discussion or > whatever) but neverthless I have heard much go
2004-08-20 by selfoscillate
hello zoran, my favorite highpass/lowpass-combination for filtering drums is a124 as highpass (for the dirt) and a108 as lowpass. the a124 cannot self-oscillate, if you want to be able to do that, you should consider an a123 highpass or you can wait for the forthcoming a106 ms20
2004-08-20 by selfoscillate
hello anders, i have both doepfer and analogue systems and of course i like them both. i cannot say that one system sounds warmer or better than the other. my opinion is that the a100 is a better choice for starting a modular, because it is cheaper (at least if you are not locate
2004-08-19 by Anders Ehlin
Yeah that's allways an idea, after all Stockholm is supposed to be a big city even if I wonder more than once, but someone out there should have some kind of system that could perform decent! Regarding your Minimoog, that's what started it all for me! I mean I'm pretty spoiled wi
2004-08-19 by Zoran Bosnjak
Hi, if you had money for only one module to fit into your Doepfer that has all necessities covered (3 VCOs, filter, 3 ADSRs, 2 LFOs, 2 mixers, 3 VCAs, noise, S&H, ringmod etc.), which one would you get: 1. A-133 Dual Polarizer 2. A-149-1 (SOU) 3. A-174 Joystick 4. A-123 Hi-Pass P