Yahoo Groups archive
Messages
Page 476 of 564 · 28179 messages matched
2003-06-23 by klamb000
Compression is important, but let's not forget EQ on the modulator. Lots and LOTS of EQ. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote: > --- In Doepfer_a100@yahoogroups.com, Florian Anwander > wrote: > > Hi selfoscillate > > > > > i find that the a129
2003-06-23 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > Hi selfoscillate > > > i find that the a129/3 attenuators are a "must". sometimes it is > > necessary to have control over the amplitudes of the separate > > filterbands to prevent distortions. > I feed the modulator
2003-06-22 by rwert
hallo sorry for this message I look for sombody who would like to exchange with me I have A-138a mixer(linear) which I would like to change to A-138b (logarithmic) is there anybody interested?? best robert [Non-text portions of this message have been removed]
2003-06-20 by klamb000
In case the U.S. customers hadn't already heard... Doug is changing the Enport name and web site at the end of the month to Sonic Highway (www.sonichighway.com). The new site isn't live yet, but it's set to go live in about 1 week. He said he'll be offering online sales of the Do
2003-06-20 by Analogueman
> From: "jmaddocks1975" > Subject: Re: A164 Manual Gate > > This module featured as a DIY project in the UK owners club > magazine, very simple to make and cheap. > I made one and it does come in use from time to time. > Yep... I've got one of those too. It was designated the 'DO
2003-06-20 by Julian
> you don't like the vocoder modules? i use a complete set > of a129-modules and i think they sound fabulous. i only have the 129 1/2 modules. i suspect that id have to look at getting more of the series to find them as usefull as they should be. most of the time they just spend
2003-06-20 by Julian
hi there, ive been thinign about it, and i suspect theres modules thatlld be of more use to me that the vocoder. i wonder if anyone would like to do a mutually agreable swap, for other modules of the sort of retail price? just if anyone was thininking the same as me, and had thei
2003-06-20 by selfoscillate
> an additional "pause stuffing" patch can also give good results, > you only need an a131, a175, a138 and of course the rest > of the necessary modules (a129/1, a129/2, a119). hello julian, i uploaded a jpg with a simple "pause stuffing" patch to the files section. this is only
2003-06-20 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "Julian" wrote: > > > you don't like the vocoder modules? i use a complete set > > of a129-modules and i think they sound fabulous. > > i only have the 129 1/2 modules. i suspect that id have to look at getting > more of the series to find the
2003-06-20 by selfoscillate
hello julian, you don't like the vocoder modules? i use a complete set of a129-modules and i think they sound fabulous. i use them with all kinds of sounds (not only vocals), but i admit that sometimes a pretty large patch is needed to make it sound really good. maybe i know a pe
2003-06-19 by jmaddocks1975
This module featured as a DIY project in the UK owners club magazine, very simple to make and cheap. I made one and it does come in use from time to time. John --- In Doepfer_a100@yahoogroups.com, "klamb000" wrote: > Look here: > > http://www.doepfer.de/a164.htm > > Regards, > Ke
2003-06-19 by ps_minor
i'm happy w the a177 footswitch controller and dual gate pedals. seems to me to be more useful since they are foot-operated. no level control ..but don't think i've ever been in a situation where i need it. which brings the question, when is it necessary to have gate level contro
2003-06-19 by klamb000
Look here: http://www.doepfer.de/a164.htm Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "ethanzer0" wrote: > --- In Doepfer_a100@yahoogroups.com, "Bilinger" wrote: > > Hi list > > I had a look at this hidden link for prospective A164 manual gate > > Did I miss the post of t
2003-06-19 by ethanzer0
--- In Doepfer_a100@yahoogroups.com, "Bilinger" wrote: > Hi list > I had a look at this hidden link for prospective A164 manual gate Did I miss the post of the hidden link? Ethan
2003-06-19 by Bilinger
Hi list I had a look at this hidden link for prospective A164 manual gate module. It is very interresting. I used to kind of emulate this using the theremins from my A100 but this module would definetely be a very good tool for easy modulation control and live operations of A100.
2003-06-19 by E K
For sale right now on ebay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2539917523 This module is perfectly fine, I just don't get much use out of it and need to make room for others. Thanks, Ernst
2003-06-17 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you prefer Doepfer to release another two NEW A100 S.O.U. modules (posibbly A149-2,A149-3...)to cover the remaining functions of the original Buchla SOURCE OF UNCERTAINTY module? CHOIC
2003-06-16 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: What would you want the leds of the A133 VC-POLARIZER module to show??? CHOICES AND RESULTS - LEDs show the function of the module (i.e. if the module amplifies positive or negative, brightn
2003-06-16 by David Salter
Julian, Agreed. It's potential is not fully realised yet. I hope that they do refine the product so I can create a patch sheet for my rig which is a mix of A100, RS modules and a few A Solutions and MOTM modules. That would be really good. Rgds David Salter Tel: +44 20 7542 2402
2003-06-16 by David Salter
Hi all, For anyone interested, Magnus has posted some additional Buchla schematics on his site http://home.swipnet.se/cfmd/synths/companies/buchla/ Regards David Salter Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699 -----------------------------------------------
2003-06-15 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you want the new A154 SEQUENCER CONTROLLER MODULE to have Voltage controlled first/last step??? CHOICES AND RESULTS - no., 1 votes, 5.88% - only VC last step in all non CV addressed mo
2003-06-15 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: A154 poll about the function of the internal VC clock oscillator: CHOICES AND RESULTS - oscillator stops in stop mode, 2 votes, 13.33% - oscillator runs permanently independend of start or s
2003-06-15 by Roel Steverink
Hi guys, Just to let you know, yesterday I brought my first case to the post office. It will be send tomorrow, so it arrives on tuesday in Utrecht at Music House quarters. I hope tell me a.s.a.p. what's wrong with it! Keep you posted. cheers, Roel
2003-06-15 by Julian
> Julian, > have a look at this > http://algoart.com/web/synthlayout.htm > David Salter Yes, far superior. Thankyou. Maybee, had i have know of that earlier, i wouldnt have run my system 'over amps' for the past 6 months. Hmm... Only feature that it could do with is being able to
2003-06-15 by Julian
Hi there, Im considering selling my ms-404, but what id much rather do is swap it for somthing interesting. Im not really tryign to sell it here, but i figured maybee someone here may be after one and not be able to find one so easy now that theyre not made any more. Anyone up fo
2003-06-14 by Joe Buechler
Hi Julian > If a patchbay were to be developed, i personally would also like to see a > few mid ports on either side (directly wired, no electronics) to carry the > midi cables through form the back of the rack to the a112 and the like. > > But then i dont have a midi patchbay, w
2003-06-13 by ringmod45
I was surfing around and chanced upon this page. This a great starting point for a polyphonic controller. Check it out. Enjoy http://perso.wanadoo.fr/rsf.synth.official/pages/polyclavier/polyclav ier.html
2003-06-13 by Brandon
6/13/2003 10:29:11 AM, Paul Schulz wrote: >Hi list, > >What if you want to connect devices with 1/4" jacks (6,3mm) like the >Minimoog Voyager expander or external FX to the rear of the patchbay? >Then you still have to use adapters/ adapter cables... perhaps a >patchbay with comb
2003-06-13 by Paul Schulz
Hi list, What if you want to connect devices with 1/4" jacks (6,3mm) like the Minimoog Voyager expander or external FX to the rear of the patchbay? Then you still have to use adapters/ adapter cables... perhaps a patchbay with combined minijacks and 1/4" jacks on the rear would b
2003-06-13 by Paul Schulz
Hi Bret, just look for a store which sells electronic components like resistors, LEDs etc. Normally they should have as well the ribbon cables as the connectors. Check out Conrad ( www.conrad.com ) As far as i know they have a internet store. cheers, Paul c45a6 wrote: > > Hello!
2003-06-13 by Julian
If a patchbay were to be developed, i personally would also like to see a few mid ports on either side (directly wired, no electronics) to carry the midi cables through form the back of the rack to the a112 and the like. But then i dont have a midi patchbay, which would serve the
2003-06-13 by klamb000
What about a combination A119/Patchbay in a single space rack? Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "Joe Buechler" wrote: > 150 Euros would be about a 50% premium over the cost of an > equivalent 1/4" patchbay (e.g. Behringer Ultrapatch Pro, 2 X 24) > which is high
2003-06-13 by Joe Buechler
150 Euros would be about a 50% premium over the cost of an equivalent 1/4" patchbay (e.g. Behringer Ultrapatch Pro, 2 X 24) which is high but not terribly unreasonable considering the product doesn't exist anywhere else. The topic comes up frequently enough in this group to make
2003-06-13 by David Salter
Bakis/Dieter, I wouldn't mind one. It beats using adapters which are unreliable and having to make cables which takes time. Regards David Salter Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699 -----Original Message----- From: Bakis Sirros [mailto:synth_freak_2000@
2003-06-13 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] 3.5mm patchbay? > Date: Fri, 13 Jun 2003 12:07:29 +0200 > > Please forward ...... > > > -----Urspr'ngliche Nachricht----- > > Von: dustin_l_mosley > [mailto:dustinmosley@hotmail.
2003-06-13 by David Salter
Julian, have a look at this http://algoart.com/web/synthlayout.htm absolutely wonderful. Only problem is that you can't mix different manufacturers modules, but that may come. Regards David Salter Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699 -----Original Messa
2003-06-13 by Tim Stinchcombe
Hi Bret, In the UK I use either Maplin or RapidElectronics - if you are not UK based, check these out on the web so that you know what to look for/ask for: www.maplin.co.uk Search on jb59 - these are the 10 way sockets that attach to the cable. You'll also see fg44, 16-way socket
2003-06-13 by Florian Anwander
Hi David > Let me know if Ken still has any, as I rather fancy one of those myself. I received a mail from Ken. He has the PCBs on stock. I will order two or three of them (one for the A100 and two as an external effects device). Is anyone else in Europe/Germany interested in som
2003-06-13 by c45a6
Hello! Does anyone know where I may buy ribbon cables, like those used by Doepfer, to connect modules to the power supply? I'm working on some diy modules. Or, perhaps a better question might be, if I wanted to make my own ribbon cables, where do I buy the black connector thingie
2003-06-12 by Joe Buechler
At one point Doepfer was offering mini-to-phone (1/8" to 1/4") patch cables, for free if I remember correctly. I use a stamdard 1/4" patch bay to connect audio and CV between my A100 and various 19" rack modules. It works very well. There's a picture of the setup in the photos se
2003-06-12 by Quantum Productions
Hi Dustin this is a good point I have found the following solution for my own setup: I use a normal 2 x 24 jack/jack format patchbay (such as the neutrik, fostex or behringer version) and I made quite a couple of 3,5 mm to jack cords because I also use a minimoog voyager (lots of
2003-06-12 by dustin_l_mosley
Hi, Does anyone know of a company that makes a patchbay with mono 3.5mm connections on the front to help integrate other pieces of gear to your a-100? I have a few A-181s (the mult with the adapter from 1/4") but it's slow and a pain to use with gear with connections on the back.
2003-06-12 by Brandon Daniel
On Thu, 12 Jun 2003, Paul Schulz wrote: > Yes, that's right. The early versions ("Blue Meanie" and "Grey Meanie") > had a Moog lowpass filter clone. Not just the meanies had them. The early grey face/tolex 2600s, the ones with square-looking speaker areas, usually had the moog cl
2003-06-12 by Brandon Daniel
On Thu, 12 Jun 2003, Bakis Sirros wrote: > hi florian, > that's wierd!i love the sound of the filters of my > ms20's!but,about the arp2600...what is it's difference > compared to the filter of my arp odyssey????i have the > gold and black version and the filter is nice, but not >
2003-06-12 by ethanzer0
You can see pictures of my Grey MK1 Tonus Arp 2600 in the photo section. It has had both 4012 and modified 4072 filters. I prefer the 4072. The 4012 is somewhat thin compared to the very fat 4072. Ethan
2003-06-12 by ethanzer0
http://groups.yahoo.com/group/Doepfer_a100/files/Ethan%20Zer0/4072.pdf Enjoy, Ethan
2003-06-12 by Doepfer_a100@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Doepfer_a100 group. File : /Ethan Zer0/4072.pdf Uploaded by : ethanzer0 Description : Arp 4072 Filter schematic You can access this file at the URL http://groups.yah
2003-06-12 by ethanzer0
--- In Doepfer_a100@yahoogroups.com, Brandon Daniel wrote: > On Thu, 12 Jun 2003, Paul Schulz wrote: > > > Yes, that´s right. The early versions ("Blue Meanie" and "Grey Meanie") > > had a Moog lowpass filter clone. Maybe this has already been covered, but, the Moog filter is the
2003-06-12 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: Manual Gate Module > Date: Thu, 12 Jun 2003 18:37:54 +0200 > > Dear Bakis, > > please look at the hidden link for the first idea of > the manual gate module > www.doepfer.de/a164.htm. We discussed
2003-06-12 by Julian
hi there, ive just aquired some more modules for my a100 system, and was trying to arrange them... i found an old link to andrew parkers modular planner, and realised it was quite a bit out of date.. i know andrew sold most of his system, (i know.. i have a lot of it sitting here