Yahoo Groups archive
Messages
Page 487 of 564 · 28179 messages matched
2003-04-15 by andrew dalio
For me, a desktop controller makes more sense - it seems that it would be quite difficult to play an instrument in a rack mounted position! RE: layout, either would work for me, but as pointed out, a KB configuration might make playing it easier. The big question for me is - what
2003-04-15 by Joe Buechler
> again,i beleive that the group of people that want a > standard keyboard controller for their a100, will get > what they want with the standard keyboard controller > that doepfer will release in the future!so,no problem. This sounds reasonable on the surface, but the words "rel
2003-04-15 by ps_minor
> by the way,if the sensors doesn't look like a normal > keyboard but they are just a simple row of plates,it > maybe better. i prefer a keyboard layout..mainly for quick note pitching of melodic material rather than marking or taping the keys so you know where middle C is and so
2003-04-15 by David Salter
Agreed, I will use a CV keyboard for normal tunings, the TKB is for everything else. David Salter Reuters Consulting Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699 -----Original Message----- From: ilanode [mailto:techmeier@web.de] Sent: 15 April 2003 10:44 To: Do
2003-04-15 by Florian Anwander
Hi Ilanode > thus I prefer an appearance that don't suggest a certain tuning. I completely agree with you Florian
2003-04-15 by Bakis Sirros
hi florian, again,i beleive that the group of people that want a standard keyboard controller for their a100, will get what they want with the standard keyboard controller that doepfer will release in the future!so,no problem. bakis. --- Florian Anwander wrote: > Hi shm > > > How
2003-04-15 by Bakis Sirros
hi shm, i don't really care if t looks like a keyboard or if it is like a set of touch sensors... bakis. --- shm1400 wrote: > --- In Doepfer_a100@yahoogroups.com, Bakis Sirros > wrote: > > dieter say: > > "Especially many people playing the TKB were a > little bit > > dissapointe
2003-04-15 by ilanode
Wondering wether it makes sense to indicate tones and semitones in the layout of the TKB or if it is just confusing bcs the actual tunig can (and usually will?) be totally different. The latter might be the reason why - to my knowledge - both Serge's and Buchla's TKBs have their
2003-04-15 by Florian Anwander
Hi shm > However, Mr. Doepfer's experience at trade shows indicates that the > keyboard-like appearance may lead to confusion about the intended > application of the TKB, and so to dispoointment about its lack of > suitability as an organ keyboard. Maybe this should be changed? W
2003-04-15 by davevosh@aol.com
In a message dated 4/14/2003 1:50:07 PM Eastern Daylight Time, synth_freak_2000@yahoo.com writes: > WELL,DIFFICULT OR NOT TO PLAY,I REALLY WANT THE > TKS!!!!ANY OPINIONS?? > hello, well, i had a serge tkb for years and found it easy to adapt to - and, if the pic is representitive
2003-04-15 by shm1400
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > dieter say: > "Especially many people playing the TKB were a little bit > dissapointed as it is much more difficult to play the > TKB than a normal keyboard as one has no tactile > reponse (like the white and black keys a
2003-04-14 by Bakis Sirros
hi synchro, i totally agree with you on this!it SHOULD be different/difficult to play after all! bakis. --- synchro1 wrote: > --- In Doepfer_a100@yahoogroups.com, Bakis Sirros > wrote: > > dieter say: > > " Especially many people playing the TKB > were a little bit > dissapointed
2003-04-14 by Tom Butcher
Whoa, that one sounds pretty interesting. Especially if the cost is much less than the Schaltwerk. > mini-SW is a mini-Schaltwerk, 8 tracks but only one set of hw > track controls. What the Regelwerk should have been. > > Joe > > --- In Doepfer_a100@yahoogroups.com, "ethanzer0" >
2003-04-14 by Bakis Sirros
dieter say: "They nearly fit with our plans (A-154 - TKB - DIY - SOU) with one exception: The SOU seems to be more important than we assumed. And we also have to take into account the time required to finish a roject. The TKB is by far the most time-consuming project. The max/min
2003-04-14 by synchro1
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > dieter say: > " Especially many people playing the TKB were a little bit dissapointed as it is much more difficult to play the TKB than a normal keyboard as one has no tactile reponse (like the white and black keys and th
2003-04-14 by Joe Buechler
mini-SW is a mini-Schaltwerk, 8 tracks but only one set of hw track controls. What the Regelwerk should have been. Joe --- In Doepfer_a100@yahoogroups.com, "ethanzer0" wrote: > > > Very interesting is the poor response for the mini-SW. > > What is the mini-SW? What are the > prop
2003-04-14 by ethanzer0
> Very interesting is the poor response for the mini-SW. What is the mini-SW? What are the proposed features? Thanks, Ethan
2003-04-14 by Joe Buechler
I thought I would point out that in the analog realm, the Absolute Value function is really a full-wave rectifier (or AM detecter). If you input an audio signal, and smooth out the ripple by patching the absolute value to a slew limiter, the patch becomes an envelope follower. Jo
2003-04-14 by Florian Anwander
Hi Tom > First, what are your opinions of the Wasp filter? Sorry, don't knwo the module, but I once played a Wasp. This was a real biting sound;it is the Fender Telecaster within the synthesizers. > Second, what are the disadvantages of using linear mixers > for audio? I understa
2003-04-14 by code_pig
For anyone interest, someone (and it isn't me) is selling a 28 module system. http://pub2.ezboard.com/fdoepfermusicelektronica100.showMessage? topicID=138.topic Regards, Kevin
2003-04-13 by Bakis Sirros
hi joe, very...complicated,indeed.... right,but then you would need too many modules for doing what you could do with only one module.so,this module,too,has a purpose. by the way,the two bottom rows of jacks in the a166 are not placebo!they are two trigger inverters. bakis. --- J
2003-04-13 by Joe Buechler
Hi Bakis > by the way,the two bottom rows of jacks in the a166 > are not placebo!they are two trigger inverters. > bakis. Right you are! I haven't looked at the front panel layout since the A166 went into production. The earlier front panel illustration on the Doepfer web site us
2003-04-12 by Joe Buechler
I thought I'd describe how do a min/max function and other comparison logic using attenuation/offset and the A150 VC switch. The most simple single-input comparison is to test whether a voltage is positive or negative, i.e. X > 0. Patch a CV source or other fixed voltage to an A1
2003-04-12 by Bakis Sirros
hi andreas, oops...for a start,i totally forgot about it... but then again,i guess the poll it's about half-made or half-ready modules.the attenuator module wasn't mentioned dy dieter when he asked me to do the poll(so i forgot),and maybe he is planning to make it latter or to re
2003-04-12 by Andreas Lindholm
I think this could be a good module, but if adding attenuators why not also have outputs for the attenuated signals as they are too. In that case it will also be an attenuator that most will use more perhaps... anyway I am interested in this module, but it doesn't top my list. --
2003-04-12 by Andreas Lindholm
I glanced at the poll and I assume this developmentplan only applies for halfmade modules or why didn't you include a option to vote for a new attenuator module? /Andreas ----- Original Message ----- From: "synth_freak_2000" To: Sent: Friday, April 11, 2003 7:30 PM Subject: [Doep
2003-04-12 by Tom Butcher
> You can use a linear mixer for audio, people do it all the > time, but you won't have good control over the mix > balance. For example, if you're mixing VCOs in a > minimoog-type patch, you won't be able to adjust the > oscillator balance very well. Yeah, that makes sense. Than
2003-04-11 by Joe Buechler
Hi Tom > what are the disadvantages of using linear mixers > for audio? I understand they're intended for CV. Our ears can't differentiate between differences in loudness very well. You have to double the loudness for it to sound like the next level up. That's why volume controls
2003-04-11 by Tom Butcher
Hello A100 list. I'm starting to build out my first Doepfer panel and have a few questions... First, what are your opinions of the Wasp filter? Second, what are the disadvantages of using linear mixers for audio? I understand they're intended for CV. Third, anyone have used modul
2003-04-11 by code_pig
Tom, You need the A124. I actually think it's the law in some states. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, Tom Butcher wrote: > > Hello A100 list. > > I'm starting to build out my first Doepfer panel and have a > few questions... > > First, what are your opinions o
2003-04-11 by Bakis Sirros
hi list, here is the correct link: www.doepfer.de/man_min.htm bakis. ===== synthfreak(parallel worlds) athens-greece [Doepfer_a100] group owner __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more http://t
2003-04-11 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: Last info before weekend > Date: Fri, 11 Apr 2003 18:45:56 +0200 > > Hallo Bakis, > > here is the last info before the weekend: > > The hidden link for the (very) preliminary max/min > module is >
2003-04-11 by David Salter
184 clone is my hope, however why stop there. Have a look in past messages, there were some really good suggestions of functionality. Rgds David Salter Reuters Consulting Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699 -----Original Message----- From: studio1dk [m
2003-04-11 by synth_freak_2000
hi list, doepfer asked me to make this poll to help the company decide the order of things to come....:-) the poll will last for only 15 days so take the time and vote,please. thank you, bakis.
2003-04-11 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: What task would you want DOEPFER to complete next?(you have more than one choises...).DIETER DOEPFER ASKED ME TO DO THIS POLL,SO IT WILL BE HELPFUL FOR HIM IF YOU VOTE... o A154 SEQ.CONTROLLER o TKS TO
2003-04-11 by Joe Buechler
I've made a two-input min/max function from a mixer and CV source for attenuation/offset and the A150 VC switch. A three-input min or max function would require a second mixer. I have to agree with Florian, not useful enough to invest the money or the frame space for something I
2003-04-11 by studio1dk
"normal" keyboard, ......Does that imply that Dieter is considering a keyboard like the Roland 180/181/181 ? I hope so..... :o) Keld
2003-04-11 by Florian Anwander
Hi Bakis > [...min/max-module...] The idea of the module is very funny, and looks not too difficult to realize, but I doubt the real usability of this module. I would not pay 50 EUR (or with attenutors assumingly more), for something I wont use more often than one or two times a
2003-04-11 by David Salter
Yep, I like the idea behind this one. I can see some interesting possibilities. regards David Salter Reuters Consulting Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699 -----Original Message----- From: Bakis Sirros [mailto:synth_freak_2000@yahoo.com] Sent: 11 April
2003-04-11 by Bakis Sirros
dieter say: "I forgot something: we also are about to test a min/max module for control applications. We think about 3 inputs and 2 outputs: max and min. The max output always outputs the maximum voltage of the 3 inputs (i.e. not mixing but pickung out the maximum voltage out of
2003-04-11 by Bakis Sirros
hi david, i agree with you about the a154 and the TKB!!!the polls should come ASAP and their manufacturing should then begin.we have waited for sooo long about theme,right??? after these, the SOU and all the other chaos modules should follow!!!!!! please,all the other members hav
2003-04-11 by ilanode
I'll take one as well. Ilanode --- In Doepfer_a100@yahoogroups.com, "code_pig" wrote: > Count me in as well. > > Regards, > Kevin > > --- In Doepfer_a100@yahoogroups.com, David Salter > wrote: > > Yep, I like the idea behind this one. > > > > I can see some interesting possibilit
2003-04-11 by code_pig
Count me in as well. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, David Salter wrote: > Yep, I like the idea behind this one. > > I can see some interesting possibilities. > > regards > > > > David Salter > Reuters Consulting > Tel: +44 20 7542 2402 > Mob: +44 7990562402 >
2003-04-11 by David Salter
Bakis/Dieter/everyone else on the list Personally, I hunger for the A154 more than any other module at this moment in time as it will allow me to make even more use from my two A155's. The TKB is also high on my list and the I want to see the DIY page up and running. I suggest th
2003-04-10 by code_pig
Or maybe we should trust Dieter's ears on this one. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "ethanzer0" wrote: > --- In Doepfer_a100@yahoogroups.com, Bakis Sirros > wrote: > > dieter say: > > including a clone of the Buchla low pass gate but we > > were not very impre
2003-04-10 by ethanzer0
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > dieter say: > including a clone of the Buchla low pass gate but we > were not very impressed by the Buchla circuit, > Perhaps they should try some Perkin-Elmer prefab vactrols. Ethan
2003-04-10 by Bakis Sirros
dieter say: "Because of the modifications of the A-107 we have to built a new prototype to be on the safe side before we start the first production series. The new prototype pc board and the prototype front panel were ordered end of last week. From our experience it will take abo
2003-04-09 by Tim Stinchcombe
Hi Antonio, It's not unknown for ICs to become loose in their sockets - check that they are properly seated by gently but firmly pushing down on them. Other than that, you'll probably have to contact Doepfer/your local dealer. Tim --- In Doepfer_a100@yahoogroups.com, "atuzzi" wro
2003-04-09 by Bakis Sirros
hi antonio, email doepfer direct! hardware@doepfer.de bakis. --- atuzzi wrote: > Hello Friends, > > My A124 (after only 5 months) doesn't work anymore! > Just turned on my > synth and no filtering is coming out (the day before > was working...). > > If a signal audio is coming in
2003-04-09 by atuzzi
Hello Friends, My A124 (after only 5 months) doesn't work anymore! Just turned on my synth and no filtering is coming out (the day before was working...). If a signal audio is coming in I can hear an attenuated signal when the mixer is on the "HP" side. The input level seems to w