Yahoo Groups archive
Messages
Page 488 of 564 · 28179 messages matched
2003-04-09 by atuzzi
I did it: I used switches with for 5 mm holes. Without remove any knob or boards. Just being careful using the drill starting with 1 mm and scaling til the 5 mm. the holes are done 10 mm from the right border and 12.5 mm from the center of the driven filter. I added a couple of p
2003-04-09 by code_pig
I wish there was a CV input for the Mix feature. It would be a bit WAY cool to be able to smoothly sweep from LPF to HPF, with a Notch filter sneaking in along the way. Any thoughts? Regards, Kevin
2003-04-09 by pstnotpd
Would it be feasible to make a mod on the A127 so I kan switch the filter and the mixer settings from the front panel? I'm thinking of 4 standard switches somewhere next to the outputs. As far as I can figure out I would only have to change the dipswitches to some kind of 3 way p
2003-04-04 by Paul Schulz
I really like the RE´AN 3-color-molded knobs. They´re available in different color combinations and have Doepfer size, as far as I know. http://www.rean.com/pages/3color.html cheers, P. pela_gius wrote: > Has anyone here found any nice looking replacement knobs for the > Doepfer?
2003-04-04 by Bakis Sirros
hello tommy dog, as far as i know,doepfer plans to release such a module!i really want one(at least)too... bakis. --- Tommy DOG wrote: > I'd like to mention my desire for a Source Of > Uncertanty type of module. > At this point, I'm holding any building on my system > until this
2003-04-04 by Tommy DOG
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > hello tommy dog, > as far as i know,doepfer plans to release such a > module!i really want one(at least)too... > bakis. Yes but too many other projects have priority. I think we won't see this until after the summer at ea
2003-04-04 by Tommy DOG
I'd like to mention my desire for a Source Of Uncertanty type of module. At this point, I'm holding any building on my system until this one is ready to ship.
2003-04-04 by Tim Stinchcombe
> > Has anyone here found any nice looking replacement knobs for the Doepfer? > > I'm kind of tired of the sea of grey and would like to try something different > As far as I know, the knobs, that Doepfer is using are also available at > normal electronic parts stores in several
2003-04-04 by Florian Anwander
Hi pelagius, > Has anyone here found any nice looking replacement knobs for the Doepfer? > I'm kind of tired of the sea of grey and would like to try something different As far as I know, the knobs, that Doepfer is using are also available at normal electronic parts stores in sev
2003-04-03 by Bakis Sirros
DIETER SAY: "I will rummage for my old documents as I made some vactrol designs about 20 years ago (filters, phasers, a guitar "vibrato", VCA). One was a triple filter with a separate LFO for each filter similar to the A-127 and was called "grawler" (don't ask why I choose that n
2003-04-03 by Bakis Sirros
in the polls section of the group!(look to the leftside bar of the home page of the group.it says"POLLS") bakis. --- shm1400 wrote: > I.m a bit new to this group, so I have a dumb > question: Where do we > vote for modules that we want to see. > > --- In Doepfer_a100@yahoogroups.
2003-04-03 by pela_gius
Has anyone here found any nice looking replacement knobs for the Doepfer? I'm kind of tired of the sea of grey and would like to try something different but the Doepfer knobs are so small and a lot of the better-looking knobs are too big. I would love something like EMS knobs wit
2003-04-03 by code_pig
Bakis, Pass on to Dieter that the Fender Rhodes and Fender amplifiers use LDR's for their tremelo, and the LDP's are completely sealed units. Might they be of some use? Regards, Kevin --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > DIETER SAY: > "I will rummage for my
2003-04-03 by ethanzer0
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > DIETER SAY: > "I will rummage for my old documents as I made some > vactrol designs about 20 years ago (filters, phasers, If anybody is interested, there is the buchla vactrol based low-pass gate: http://www.buzzclick-mus
2003-04-03 by shm1400
I.m a bit new to this group, so I have a dumb question: Where do we vote for modules that we want to see. --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > hey andreas, > you know what i mean... > bakis. > > > --- Andreas Lindholm > wrote: > > No use, we can only vote on
2003-04-03 by Bakis Sirros
hey andreas, you know what i mean... bakis. --- Andreas Lindholm wrote: > No use, we can only vote once per person... why > should we kepp voting? > > > ----- Original Message ----- > From: "Bakis Sirros" > To: > Sent: Thursday, April 03, 2003 9:16 AM > Subject: Re: [Doepfer_a100
2003-04-03 by Andreas Lindholm
No use, we can only vote once per person... why should we kepp voting? ----- Original Message ----- From: "Bakis Sirros" To: Sent: Thursday, April 03, 2003 9:16 AM Subject: Re: [Doepfer_a100] Re: low pass gate/vactrol > hi list, > i was wondering...as you all seem to want a VACTR
2003-04-03 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: Fwd: AW: [Doepfer_a100] DOEPFER'S > ANSWER to the possibility of offering kits. > Date: Thu, 3 Apr 2003 13:29:54 +0200 > > > -----Urspr'ngliche Nachricht----- > > Von: Erik [mailto:erikstormer@
2003-04-03 by code_pig
Just a public service announcement about another range of new modules. http://www.bluebay.be/Lasmodules.html Now, back to Doepfer related stuff. Regards, Kevin
2003-04-03 by Florian Anwander
Hi Erik > Hi, but what about the possibility to buy the PIC for the MCV8 ??? Questions like these you should ask direct to Doepfer -> sales@doepfer.de BTW.: As far as I remember the MCV8 did not use a PIC but a microprozessor with a separate EPROM. So assumingly you would have to
2003-04-03 by Bakis Sirros
hi florian, also,i would not buy any blank frontpanel!if i did ,i would make a diy module that would look ,not like an "electronic garden",but more like an electronic shithouse...:-) bakis. --- Florian Anwander wrote: > Hi > > > What do people think of the blank panel idea? > Doe
2003-04-03 by David Salter
All Buchla type modules are of interest to me. I had the pleasure of playing with a Buchla system for a couple of hours once and it quite literally blew my mind. The sound and level of control mixed with an uncertainty (pun intended) was fantastic. Rgds David Salter Reuters Consu
2003-04-03 by Florian Anwander
Hi > What do people think of the blank panel idea? Doepfer already offers Blankpanels with the whole for the screws (A100B1/2/4/8), but without wholes for jacks or pots. I would always use those for selfmade modules, since the position of switches, pots and jacks will always depe
2003-04-03 by Erik
Hi, but what about the possibility to buy the PIC for the MCV8 ??? I don't think there is any company that have a MIDI2CV with 8 CV out. IF people who are DIY had the possibility to buy schematics, adjustment procedure and PIC ( I guess you used a PIC for this project)it will be
2003-04-03 by Bakis Sirros
hi list, i was wondering...as you all seem to want a VACTROL BASED FILTER AND VACTROL BASED PHASER...WHY THE NUMBER OF VOTES TO THE CORESPONDING POLLS ARE SMALL????? PLEASE,KEEP ON VOTING!!!!!!!! bakis. --- andrew dalio wrote: > Well, I have a Wiard Borg filter (which is a dual >
2003-04-03 by ilanode
Won't buy one either. I have some kits in the pipeline and for me half the fun is designing my own frontplates with Schaeffer Apparatebau's software. Ilanode --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > hi florian, > also,i would not buy any blank frontpanel!if i di
2003-04-03 by shm1400
Lets not forget that in his last message (3625), Dieter Doepfer said that he would agree to make blank panels available if there was agreement in the group concerning the front panel and pcb design. I am not sure what the pcb design could be, but I think a blank 8hp 5 pot/5 jack
2003-04-03 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "ps_minor" wrote: > > > While we're on the subject of Buchla style low pass > > > gates, Would > > > Doepfer consider actually manufacturing one? The > > > circuit must be in > > > the public domain, and seems to be well known. It > > > has to
2003-04-03 by ethanzer0
--- In Doepfer_a100@yahoogroups.com, "shm1400" wrote: > While we're on the subject of Buchla style low pass gates, Would > Doepfer consider actually manufacturing one? The circuit must be > the public domain, and seems to be well known. It has to be done > with vactrols, just lik
2003-04-02 by andrew dalio
Well, I have a Wiard Borg filter (which is a dual filter), which is sort of based on the Buchla Low Pass Gate and the MS20 filter (hench the name B-uchla + k-ORG). It's a FANTASTIC sounding filter! However, it might do Doepfer good to make a vactrol filter, since Wiard is discont
2003-04-02 by Bakis Sirros
hi shm, ME!!!!i am interested!please manufacture this low pass gate(AND ALL THE OTHER VACTROL MODULES!!!THAT ARE PROPOSED IN THE POLLS)---KEEP VOTING ABOUT THEM--- bakis. --- shm1400 wrote: > It would be a great idea for Doepfer to offer blank > panels without > the Doepfer logo.
2003-04-02 by ps_minor
> > While we're on the subject of Buchla style low pass > > gates, Would > > Doepfer consider actually manufacturing one? The > > circuit must be in > > the public domain, and seems to be well known. It > > has to be done > > with vactrols, just like the original. The slow > > re
2003-04-02 by code_pig
Buchla style LP/vactrol gates? I'm in... I mean, yes please. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "shm1400" wrote: > It would be a great idea for Doepfer to offer blank panels without > the Doepfer logo. I would definitely buy several of them if > offered. The idea
2003-04-02 by shm1400
It would be a great idea for Doepfer to offer blank panels without the Doepfer logo. I would definitely buy several of them if offered. The idea of a 5 jack, 5 pot 8hp panel sounds perfect too. Please do it. It's funny. I was wishing for this exact thing just this week. Even for
2003-04-02 by Florian Anwander
Hi everybody, I have two suggestions regarding new modules: The first is an addon-Mixer for filters and similar modules: If I want to mix several CV _AND_ several Audio-Signals for one Filter, I need two Modules. But usually I do not need all four inputs of a mixer. So my new mix
2003-04-02 by Joe Buechler
I would combine a low-cost VCA with the A140 for voltage control of envelope intensity. I'd also combine a low-cost vca (with dual signal inputs instead of dual CV inputs) with half a trigger modifier to produce a 4HP logic module (and, or, not). I'd combine a two-channel mixer/a
2003-04-02 by ilanode
The suggested mixer sounds cool. But even more combined modules since if you have a small system a dual S & H is of little use while a S & H combined with a Slew Limiter would be great. The Trigger Delay could be housed with a VC Switch for trigger signals (i.e. trigger version o
2003-04-02 by Florian Anwander
Hi > To my knowledge there are two reasons, why Doepfer stopped selling the > kits:[...] Please ignore my posting, I overlooked the mail from Bakis, where he forwarded Dopefers statement. Florian
2003-04-02 by Florian Anwander
Hi Andreas > I don't see why Doepfer shouldn't be able to sell pre drilled plates and > kits if they wanted to. They have all the components and all they have to do > is NOT mount them ;) That would be very useful. To my knowledge there are two reasons, why Doepfer stopped sellin
2003-04-02 by pstnotpd
Well, if we are going thatta way. I could imagine two types of these, 186a : 5 knobs,5 switches and 10 jack sockets and maybe a big 25 D connector so you can connect up to whatever experimentation board you'd want to use. Of course connected to the power supply with some sort of
2003-04-01 by Andreas Lindholm
It seemed that I overrated the actually manufacturing by Doepfer in this globalized world. So I seems a bit trickier to manufacture kits. And I fully understand the problem with secondhand kits that people sell as genuin Doepfer gear. Technically speaking that isn't not the respo
2003-04-01 by pnedito2000
$1900 Custom Built stained birchwood cabinet 25x mogami/blacet patch cables and 8x Rat Shack cables w/ the following doepfer modules: 2 6U racks packed with the following modules: 1st row: A162 dual trigger delay/2x110 standard VCO/2x111 High end VCO/114 dual ring mod/138 mixer/1
2003-04-01 by code_pig
Don't get me wrong. I'd really like to see some Doepfer kits, but Dieter has to protect his company's reputation. Anyone have an idea? Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "Andreas Lindholm" wrote: > It seemed that I overrated the actually manufacturing by Doepfer
2003-04-01 by David Salter
Kevin, Not tried the ARP filter, the Korg Delta filter is nice though. Regards David Salter Reuters Consulting Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699 -----Original Message----- From: code_pig [mailto:code_pig@yahoo.com] Sent: 01 April 2003 15:34 To: Doepf
2003-04-01 by David Salter
Kevin, I tend to find the EFM pcbs of a lower quality to the Oakley boards. Specifically they are single sided, if you are heavy handed with a soldering iron, tracks can lift. Most of the current PCB/circuit designs are pretty much bug free but a quick look through the user group
2003-04-01 by code_pig
David, Thanks for the info. I am aware that the Oakley stuff has a higher quality PCB, but was more curious about the sonic quality... more specifically his ARP filter. Apologies for thread-jack. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, David Salter wrote: > Kevin, > >
2003-04-01 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] yes to Blank paneRe: The > most advancedAttenuator yet > Date: Tue, 1 Apr 2003 13:11:19 +0200 > > ----> Please forward to the group > > > I don't see why Doepfer shouldn't be abl
2003-04-01 by code_pig
I have to agree with Dieter about people building kits, as many aspiring DIY'ers don't have the skill or patience to finish a single module, let alone enough modules to create a small synth. Having said that, it looks like a few of us here do not fall into that camp. I understand
2003-04-01 by code_pig
David, I am aware of Shaeffer, and they do very nice work indeed. That said, I'm in the US these days, and the cost... you know where I'm going with this, so never mind. By the way, how do you like the EFM stuff compared with Oakley? Regards, Kevin --- In Doepfer_a100@yahoogroups
2003-04-01 by David Salter
Agreed, a simple dual attenuator would be nice. I also like the idea of Andreas's panel with the LCD, easy to get some precision with out too much extra cost. Regards David Salter Reuters Consulting Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699 -----Original Mes