Yahoo Groups archive
Messages
Page 485 of 564 · 28179 messages matched
2003-05-02 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: A-107 Control > Date: Fri, 2 May 2003 16:16:19 +0200 > > Dear Bakis, > > we are about to discuss the A-107 software, > especially the programming the > filter sequences. There are two different > p
2003-05-02 by ethanzer0
Hi All, I own an A136 and have been using it more lately and it occured to me that the most radical timbre changes are caued by turning the center "A" knob. Does anybody know why this feature is not voltage controllable? Also, is there a simple mod to add a "CV in" to the A136 "A
2003-05-02 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: In what way would you prefer to program filter sequences on the A107 MORPHING FILTER?(see message 3824 for understanding the two modes). o "On the fly" o "Working buffer concept" To vote, please visit
2003-05-02 by Tim Stinchcombe
--- In Doepfer_a100@yahoogroups.com, "Tim Stinchcombe" wrote: > > The other story is dynamically positioning a mono signal on four or > more > > channels. I did this with my Nord Modular, which has 4 outputs. For > a mono > > signal you need simply three panners: > > 1.) Front Re
2003-05-02 by Tim Stinchcombe
> The other story is dynamically positioning a mono signal on four or more > channels. I did this with my Nord Modular, which has 4 outputs. For a mono > signal you need simply three panners: > 1.) Front Rear > 2.) L-Front R-Front > 3.) L_Rear R-Rear I'm not sure I fully get all
2003-05-02 by David Salter
How about something like these? http://www.sslsys.com/Pages/QuadPanner/QP_Overview.htm http://www.manquen.net/swapstop/item.php?id=3 or a serge Quad panner module -----Original Message----- From: Andreas Lindholm [mailto:andreas.k.lindholm@telia.com] Sent: 02 May 2003 12:22 To: D
2003-05-02 by Andreas Lindholm
Compared to buying a 5.1 compatible mixing console a few panners seems extremely cheap for panning sounds in 3d, but of course I have to remix each one of the tracks and the mix them together again. But I don't know any reasonably priced multichannel mixer, do you guys? Say 2000-
2003-05-02 by Andreas Lindholm
Okey, that is good enough for me then. I'll order a few and try it out! ----- Original Message ----- From: "Bakis Sirros" To: Sent: Friday, May 02, 2003 11:56 AM Subject: Re: [Doepfer_a100] Surround mxing on A100 > hi andreas, > i have two vc panning modules that i use all the ti
2003-05-02 by Bakis Sirros
hi andreas, i have two vc panning modules that i use all the time and they seem to me that these sound fine! bakis. --- Andreas Lindholm wrote: > Ahh, silly me! I won't need any vcas, just panners! > There are vca's in the > panners! Great, but do the vcas in the panners sound >
2003-05-02 by Florian Anwander
Hi Andreas > As for panning I think we are on the same track you and I. I want to be able > to sweep diagonally too like say from frontleft to right rear. I know 3D panning with joysticks from professional consoles. The most remarkable thing is, that linear movements are not reco
2003-05-02 by Andreas Lindholm
Ahh, silly me! I won't need any vcas, just panners! There are vca's in the panners! Great, but do the vcas in the panners sound like the standard vcas? ----- Original Message ----- From: "Florian Anwander" To: Sent: Friday, May 02, 2003 9:29 AM Subject: Re: [Doepfer_a100] Surroun
2003-05-02 by selfoscillate
the vc panner should sound like the a130 linear vca, but i never really compared their sound. best wishes self oscillate --- In Doepfer_a100@yahoogroups.com, "Andreas Lindholm" wrote: > Ahh, silly me! I won't need any vcas, just panners! There are vca's in the > panners! Great, b
2003-05-02 by Andreas Lindholm
Thanx Florian. Controllers, I totally forgot that! Of course - the joystick module! As for panning I think we are on the same track you and I. I want to be able to sweep diagonally too like say from frontleft to right rear. Have you done that with the three panner setup, does it
2003-05-02 by Andreas Lindholm
Helps? None at all actually ;) I have total control over the surround encoding if from a five sample source. So that is not the issue. But the synths need to be able to ouptput five channels of audio mixes and the only one I can expand that way is the A100. It would take three VC
2003-05-02 by Florian Anwander
Hi Andreas > I have jsut started making my own dvd-movies and could help looking into > surround encoding. And I realized that I dont' have a mixer nor any synth > capabable of surround mixing. But my A100 could be expanded with VCAs, LFOs > and some logicmodules and panners to m
2003-05-01 by davevosh@aol.com
In a message dated 5/1/2003 6:52:54 AM Eastern Daylight Time, andreas.k.lindholm@telia.com writes: > looking into > surround encoding. andreas, sorry, i can`t help about the issue of "encoding" but you might try putting some tracks on a dvd and checking the playback. my normal mo
2003-05-01 by Heath Teasdale
Does anyone out there know of a good reference source for graphics of waveforms or spectra for acoustic instruments. I'm keen to emulate the 'Tomita' thing - mixing some way out effects you can get with a decent size Doepfer with some incredibly realistic synthesized instruments
2003-05-01 by Andreas Lindholm
I have jsut started making my own dvd-movies and could help looking into surround encoding. And I realized that I dont' have a mixer nor any synth capabable of surround mixing. But my A100 could be expanded with VCAs, LFOs and some logicmodules and panners to make it into the DVD
2003-04-30 by Doepfer_a100@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Doepfer_a100 group. File : /JVTalbert/So_You're_Professor_Quatermass.txt Uploaded by : jvtalbert Description : About SYPQ You can access this file at the URL http://
2003-04-30 by Doepfer_a100@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Doepfer_a100 group. File : /JVTalbert/So_You're_Professor_Quatermass.wma Uploaded by : jvtalbert Description : Experimental A-100 Track You can access this file at t
2003-04-28 by Doepfer_a100@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Doepfer_a100 group. File : /bonanox.mp3 Uploaded by : modularplanet Description : Mozart-piece with A-100-sound ('Jaw' from Modular-Planet). I like old music with ne
2003-04-27 by Joe Buechler
When I try to install it, I get a message saying "This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package." I re-installed the version of Windows Installer on their site, and rebooted, but still got ex
2003-04-27 by Bakis Sirros
hello r., if you look at the links section of the group...this link was already there two days ago... but i maybe should have post a message to announce it. :-) bakis. --- phaeton777 wrote: > Below you'll find a link to a site where you can > download a Doepfer > layout program f
2003-04-27 by phaeton777
Below you'll find a link to a site where you can download a Doepfer layout program for free (also MOTM,Blacet,AS,Synth.com and Modcan) This is an invaluable tool for planning your system. Thanks to John Lofflink for the original post in the MOTM group. R. http://algoart.com/web/s
2003-04-27 by Joe Buechler
Hi Timothy > The answer to the question is almost certainly 'no' - > I wouldn't like to say that it cannot be done at all, but if it can, > it's unlikely to be simple. A little lateral thinking produces a simple solution: sell the A130 and buy a new one :-)
2003-04-27 by rwert
That seems to rule it out as anything as elaborate as a filter! So does it just mix the output of the other pedal straight back into it's input, via the pot maybe? So for your $150 you get a box with some fancy graphics, a few jacks and a knob?. I'm even more intrigued now ok, bu
2003-04-27 by Tim Stinchcombe
Hi Joe, > If I understand correctly, the newer A130 VCAs will work with DC, but > my older one doesn't. Is there a simple mod to make it work with DC? You do understand correctly on the first statement - Dieter says so in post #2770. The answer to the question is almost certainly
2003-04-27 by Joe Buechler
If I understand correctly, the newer A130 VCAs will work with DC, but my older one doesn't. Is there a simple mod to make it work with DC? Joe
2003-04-27 by Tim Stinchcombe
Crikey, it gets worse! Discovered there are actually *two* reviews there. In the second it says: "The actual electronics inside look as simple as can be, without a transistorized chip or circuit board in sight." That seems to rule it out as anything as elaborate as a filter! So d
2003-04-27 by Tim Stinchcombe
> perhaps something that combines Death by Audio's TSA: > http://www.killerrockandroll.com/deathbyaudio/totalsonicannihilation.h tml What a truly awful web page. Not only do you have to mess around trying to work out how to actually *see* the text so that you can read it, but the
2003-04-26 by p. hendricks
perhaps something that combines Death by Audio's TSA: http://www.killerrockandroll.com/deathbyaudio/totalsonicannihilation.html with a matrix mixer(like this): http://www.cgs.synth.net/modules/index.html#cgs33 perhaps a lesser matrix mixer to save on costs though. this would add
2003-04-25 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: what features would you like to be included in the A101 MS20 STYLE FILTER??? CHOICES AND RESULTS - individual inputs,outputs for the HPF and the LPF sections., 11 votes, 30.56% - cv inputs f
2003-04-25 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: would you like doepfer to manufacture the A101 MS20 STYLE FILTER??? CHOICES AND RESULTS - yes!, 10 votes, 52.63% - maybe..., 5 votes, 26.32% - no., 4 votes, 21.05% For more information about
2003-04-25 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: What task would you want DOEPFER to complete next?(you can vote for more than one choises...).DIETER DOEPFER ASKED ME TO DO THIS POLL,SO IT WILL BE HELPFUL FOR HIM IF YOU VOTE... CHOICES AND
2003-04-24 by David Salter
Keld, Not at all. The Museum studio is still Martin's pet project. Not many people realise it but Martin works in the City of London as a trader for an international bank (probably explains how he managed to finance his studio). The reason Martin gave for selling the Phoenix was
2003-04-23 by klamb000
You know Bakis, your last sentence absolutely begs for a "big hole" joke. That said, I'm far too polite to think such things. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > hi list, > i had a similar problem after moving my,then > small,a100 ,two years
2003-04-23 by Bakis Sirros
hi ringmod, a big thank you to ringmod for all the files he uploaded!!!you are always a great help to the group and to dieter! and let's not forget all those other electroheads members too!!! bakis. ===== synthfreak(parallel worlds) athens-greece [Doepfer_a100] group owner ______
2003-04-23 by Bakis Sirros
hi list, i had a similar problem after moving my,then small,a100 ,two years before.something got into one of the external cv/audio input of my a155 and that step didn't output any cv at all.after connecting a patch cable and then removing the cable ,all was ok! if we have these p
2003-04-23 by studio1dk
> Martin sold off the Phoenix in pieces, so I expect it is the same > cabinet. > Do any of you know why Martin sold off the phoenix? Has he completly stopped making analog music? - Is the museum studio closed? Keld
2003-04-23 by Tommy DOG
This question should probably be posted to the Buchla Yahoo group since it is likely there will be people on there who not only have the module but may have the manual. Obviously looking at the Wiard Wogglebug may be of use, since it has it's basis in the SOU. I am sure that it's
2003-04-23 by David Salter
Martin sold off the Phoenix in pieces, so I expect it is the same cabinet. Regards David Salter Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699 -----Original Message----- From: studio1dk [mailto:keldsorensen@mail1.stofanet.dk] Sent: 23 April 2003 16:22 To: Doepfer
2003-04-23 by Florian Anwander
Hi peter > On my A100, the lfo & vclfo are causing the A110 vcos to change pitch (in > time with the lfos) -10Hz which is annoying. > Has anyone else had / fixed this? This looks, like your powersupply is not powerful enough. Florian
2003-04-23 by peter davis
Hi. On my A100, the lfo & vclfo are causing the A110 vcos to change pitch (in time with the lfos) -10Hz which is annoying. Has anyone else had / fixed this? Thanks pete
2003-04-23 by klamb000
Or, as in my case, the CV1 input need it's jack socket cleaned. I had the same problem, and discovered that when I plugged a cable into CV1, and then removed the cable, the problem disappeared... until the next time. I simply took the module out, cleaned and adjusted the socket,
2003-04-23 by studio1dk
Do you know if it is Martin Newcombs rack or just a copy? -Looks excatly like Martins..... Keld > Interesting to note that the cabinet work was used by the Phoenix system > that Bob Williams built for Martin Newcombe at what was the Museum of > Synthesis Technology, now Museum St
2003-04-23 by Bakis Sirros
dieter say: "I'm just back so there are no news since my last email. The A-105 will be manufactured with the next series of A-100 modules. So I hope it will be available end of May (without obligation). The A-107 will still take some time as we have to wait for the new prototypes
2003-04-23 by David Salter
Bakis, Interesting to note that the cabinet work was used by the Phoenix system that Bob Williams built for Martin Newcombe at what was the Museum of Synthesis Technology, now Museum Studio, have a look at Martins site - to die for home studio http://www.museumstudio.co.uk/ Phoen
2003-04-23 by synth_freak_2000
hi list, go to the photos section to see the big a100(and partially analogue solutions[two oberkorn sequencers],and analogue systems??)modular of the human league... bakis. [doepfer_a100]group owner
2003-04-22 by Tim Stinchcombe
> > > if Dieter is listening in, he can put us straight > > once and for all?! > > > > Yes, he is listening :-) > > > > 230V systems: 100/125mA or 0.1A/0.125A slow blow or > > T100mA/T125mA (German word > > for slow blow = traege) > > 115V systems: 200/250mA or 0.2A/0.25A slow bl
2003-04-22 by ringmod45
Hi Florian, NICE ONE, thanks a million. hopefully it will help the schaltwerk as well, you know the tied note thing. Regards, RM -- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > Hi John > > I suggested a SH-101/JX-3P style sequencer to Dieter for some of the > forthc