Yahoo Groups archive
Messages
Page 550 of 564 · 28179 messages matched
2002-01-21 by david.salter@reuters.com
Tris, Go to http://groups.yahoo.com/group/Doepfer_a100/polls I still can not make up my mind if I will go poly with the modular. I might prefer a VA system, i.e. Nord, Reactor or Creamware. More cost effective and still modular. Nothing could replace a real, tactile modular thoug
2002-01-21 by david.salter@reuters.com
Hi Tris, £365 is pretty good. Not sure on if Doepfer could produce for less, but as a CV/gate device it would be a simpler unit design wise. Regards David thepeak cc: Subject: RE: [Doepfer_a100] Ribbon controller 21/01/2002 Header: Internal Use Only 15:41 Please respond to Doepfe
2002-01-21 by Rhen, Kris
One thing to consider is that Doepfer ALREADY has the CV-to-MIDI part etc. designed and constructed. It would be a matter of fitting existing technology to a new ribbon controller - may be cheaper than you think KRIS > -----Original Message----- > £365 is pretty good. > > Not sur
2002-01-21 by david.salter@reuters.com
Hi, Tris. I cannot deny that. A tad pricey though. Regards David thepeak cc: Subject: RE: [Doepfer_a100] Ribbon controller 21/01/2002 Header: Internal Use Only 15:17 Please respond to Doepfer_a100 Hi David' and others I use the kurzweil ribbon controller with partial use of the m
2002-01-21 by bakis Sirros
haaaaaa..........now i get it!!thanks. synthfreak --- Florian Anwander wrote: > Hi Bakis > > > can you explain more the term"phase locked loop > > osc."??, > A phase locked loop is a cicuit which multiplies a > frequency. It is the > opposit to the divider A-115. > > > > also,wha
2002-01-21 by Florian Anwander
Hi Bakis > can you explain more the term"phase locked loop > osc."??, A phase locked loop is a cicuit which multiplies a frequency. It is the opposit to the divider A-115. > also,what do you mean by"vca for cv > signals??we already have the a130's for this... No all Doepfer VCAs
2002-01-21 by thepeak
Hello again I was just thinking and well where do we vote for new modules etc? Also would people be interested in a poly-oscillator, Everything else in the doepfer range allows for a poly working system but the tuning of let's say a minimum 8 oscillators makes it very difficult.
2002-01-21 by thepeak
Hi David I paid £365, could doepfer make something for less than that? Regards Tris -----Original Message----- From: david.salter@reuters.com [mailto:david.salter@reuters.com] Sent: Monday, January 21, 2002 3:29 PM To: Doepfer_a100@yahoogroups.com Subject: RE: [Doepfer_a100] Rib
2002-01-21 by thepeak
Hi David and others I use the kurzweil ribbon controller with partial use of the mcv24, it makes an excellent instrument on it's own as well as with sequencer and/or keyboard. It has an enormous amount of playing potential and a locking arpegiator to boot Regards TJ -----Origina
2002-01-21 by d_salteruk
Hi Bakis & everyone else. I was wondering if there has been any feedback from from Dieter on this one. Looking at the Kurzweil unit (http://www.kurzweilmusicsystems.com/html/expmate.html) as a general guide (forget pedal and breath inputs), the length is about right and if it had
2002-01-21 by bakis Sirros
hi florian, can you explain more the term"phase locked loop osc."??,also,what do you mean by"vca for cv signals??we already have the a130's for this... thanks. ===== synthfreak(parallel worlds) athens-greece [Doepfer_a100] group owner-moderator ___________________________________
2002-01-21 by Florian Anwander
Hi Roel > Yes, I know the americans back then had more money to spend back then, > then Mr Doepfer in Germany now! There is a big difference between a large Moog Modular System and a Doepfer synth. The Bid Moogs were developed in the tradition of scientific measurement and testin
2002-01-20 by Rhen, Kris
Hi I'm interested in the 156, the AS quant, the 104, cv source. What are yourn terms and price? Thanks! KRIS > -----Original Message----- > From: bodego7 [mailto:jesusd@sbcglobal.net] > Sent: Sunday, January 20, 2002 3:05 PM > To: Doepfer_a100@yahoogroups.com > Subject: [Doepfer_
2002-01-20 by bodego7
I'm trying to trim down my system. I have a few modules for sale, in PERFECT condition: A-190 MIDI-CV converter (two), A-112 wavetable oscillator, A-104 Trautonium formant filter, A-163 freq. divider, sample&hold module, VC source module, A-156 quantizer, plus an Analogue Systems
2002-01-20 by buechlerjoe
Thanks for all the feedback on standalone filters. I learned something interesting from the Mutronics web site: "VCF ducking". I tried it on my A100 using the A119's envelope follower. Very nice, I'll keep that one in the bag of tricks. Enport was kind enough to send me a Vermona
2002-01-18 by davevosh@aol.com
In a message dated 1/17/2002 8:00:02 AM Eastern Standard Time, synth_freak_2000@yahoo.com writes: > dealer for doepfer and analog systems hello list, having bought a fair amount of modular stuff by doepfer and a bit of analogue systems and solutions from the u.s. distributor, enp
2002-01-18 by bakis Sirros
hi list, i just learnt from dieter doepfer that,for a100 customers,they can give you some cables(2-3m long,with a 3.5mm plug in one end and another connector[rca,din...]in the other end)FOR FREE(of course,as long as the stock lasts...),but only when you order other a100 items(mod
2002-01-18 by synth_freak_2000
hi roel, well,there is no secret...i don't know what you mean...??as for the linear/exponential thing,i use lin.mixers for cv's and exp.mixers for audio AND cv's...they work fine!!i think the only difference is that due to the different pontesiometers in each mixer module,the exp
2002-01-18 by Roel Steverink
Hi Florian, My message was already gone. I wanted to react to another thing you said. Your were talking about elaborate procedings and high pressicion equipment, that would make such a octave/semioctave switch very expensive. Yes, I know the americans back then had more money to
2002-01-18 by Roel Steverink
From: bakis Sirros Date: Fri Jan 18, 2002 12:24 pm Subject: Re: [Doepfer_a100] Variable level waveform output on VCO Bakis wrote: hi roel, >i'm not sure what you mean...you can have variable >level for each waveform by using a mixer after the >vco!!!also,what do you mean by"... S
2002-01-18 by Roel Steverink
From: Florian Anwander Date: Fri Jan 18, 2002 9:51 am Subject: Re: [Doepfer_a100] Variable level waveform output on VCO Hi Roel > thought, this is always the same, always fixed. Wouldn't I gain a lot more > possibilities if the frequency of the waveform could be influenced on the
2002-01-18 by Roel Steverink
From: "Rhen, Kris" Date: Thu Jan 17, 2002 9:57 pm Subject: RE: [Doepfer_a100] Variable level waveform output on VCO Kris wrote: >When you say 'variable leve' do you mean 'different volume than just the >standard 5vp-p'? I'm not sure if that meshes with 'frequency of the >waveform
2002-01-18 by ethanzer0
--- In Doepfer_a100@y..., bakis Sirros wrote: > well,i think the doepfer module will probably be > cheaper...especially for us in europe!that's what i > mean... > synthfreak > > If you know someone in Canada, buy from the dealer in Montreal and have them ship it too you. You can
2002-01-18 by buechlerjoe
"Does anyone know how much a module-loaded 6u A100 weighs?" Suggest you call Enport and ask. Doug ships 6U basic systems regularly. Joe
2002-01-18 by david.salter@reuters.com
Hi all, Florian is correct about needing high quality components for a switching panel. This might be of interest though! It was designed for use with Larry's MOTM VCO's but will work with any make. http://www.wiseguysynth.com/larry/diy.htm I'm tempted myself. Regards David Flori
2002-01-18 by bakis Sirros
hi david, of course,I AGREE!!! synthfreak --- davevosh@aol.com wrote: > In a message dated 1/16/2002 4:30:30 AM Eastern > Standard Time, > synth_freak_2000@yahoo.com writes: > > > > dieter doepfer informed me yesterday that they are > seriously thinking > > of releasing a chaos g
2002-01-18 by Deal, Mark
Does anyone know how much a module-loaded 6u A100 weighs? I have to ship mine and have no weighing equipment to provide me with an answer. Obviously i'd have to factor in the weight of a flight case, but an idea about how much the synth itself weighs would be handy. I don't think
2002-01-18 by bakis Sirros
hi roel, i'm not sure what you mean...you can have variable level for each waveform by using a mixer after the vco!!!also,what do you mean by"...A switch between octave and semitones on it as well!..."a switch for octaves already exists... synthfreak p.s.:i was speaking to dieter
2002-01-18 by Florian Anwander
Hi Roel > thought, this is always the same, always fixed. Wouldn't I gain a lot more > possibilities if the frequency of the waveform could be influenced on the > output. You think of a VCA that lowers/rises the Waveform level in proportion to the note that is played? All you nee
2002-01-18 by duffnuff
>>releasing a chaos generator module!!! > it.it sounds like it may be one of those ideas that needs to be encouraged ! > best, > dave Ditto!! fingers are crossed that this module (or something similar) makes it into production one day. and crossed again for the touch keyboard. ju
2002-01-17 by davevosh@aol.com
In a message dated 1/16/2002 4:30:30 AM Eastern Standard Time, synth_freak_2000@yahoo.com writes: > dieter doepfer informed me yesterday that they are seriously thinking > of releasing a chaos generator module!!! > hello ! a very, very interesting idea ! i would certainly like to
2002-01-17 by Rhen, Kris
When you say 'variable leve' do you mean 'different volume than just the standard 5vp-p'? I'm not sure if that meshes with 'frequency of the waveform could be influenced on the output'? Run 'em into a mixer and attenuate them. You can never have enough mixers! :-) It would be ver
2002-01-17 by Roel Steverink
Hi all, I'm no technician. But I was wondering. What do you think of a new VCO with variable level waveform outputs, like you had on the moog 901 VCO. I got this I idea when I was plugging a output from my standard VCO and thought, this is always the same, always fixed. Wouldn't
2002-01-17 by bakis Sirros
well,i think the doepfer module will probably be cheaper...especially for us in europe!that's what i mean... synthfreak --- Les Mizzell wrote: > Well, at a little over $400 US, the Wiard Wogglebug > may LOOK expensive, but > consider this: > > The Woggle Bug module contains: > >
2002-01-17 by bakis Sirros
hi, hmmm....i don't know...but i think that as long as a dealer for doepfer and analog systems exists there in usa,you have to buy these products from these dealers... synthfreak --- spfeifer wrote: > Synthfreak, > > I agree with you about the prices. I live in the US > and the p
2002-01-16 by Les Mizzell
Well, at a little over $400 US, the Wiard Wogglebug may LOOK expensive, but consider this: The Woggle Bug module contains: 2 Voltage Controlled Low Frequency Oscillators 4 Sample and Hold Units 4 Lag Processors 4 Audio Rate Voltage Controlled Oscillators 4 Balanced Modulators ("r
2002-01-16 by spfeifer
Synthfreak, I agree with you about the prices. I live in the US and the prices are high. Do you know if there is a way I could buy from the UK and save big $$$ Scott --- In Doepfer_a100@y..., "synth_freak_2000" wrote: > hi les, > o.k.,but that doesn't mean that the chaos module t
2002-01-16 by Florian Anwander
Hi Bakis > http://www.buchla.com/historical/b200/265-uncertainty.html After having a look at this page and the Wiard page, I think doepfer should not do a module like this. My arguments are: - You can get similar results with combinations of existing modules - and you can do "onl
2002-01-16 by bakis Sirros
hi list a song created with the buchla modular using the source of uncertainty module: http://artists.mp3s.com/artist_song/125/125482.html ===== synthfreak(parallel worlds) athens-greece [Doepfer_a100] group owner-moderator __________________________________________________ Do Yo
2002-01-16 by bakis Sirros
here is a link: http://www.buchla.com/historical/b200/265-uncertainty.html ===== synthfreak(parallel worlds) athens-greece [Doepfer_a100] group owner-moderator __________________________________________________ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.ya
2002-01-16 by Les Mizzell
Already built and shipping by Wiard. The "Woggle Bug" reproduces the set of random voltages available from the original Buchla Model 265 "Source of Uncertainty" module. MP3 here: http://www.wiard.com/samples/WogglebugDemo.mp3 Info here: http://www.wiard.com/modular/Woggle/Woggle.
2002-01-16 by synth_freak_2000
hi les, o.k.,but that doesn't mean that the chaos module that might be released from doepfer will be similar to that from wiard,right??all modular developers release lfo's,env's,vco's,but there are many differences...also,for the modular fans here in europe, is much cheaper to bu
2002-01-16 by synth_freak_2000
hi les, o.k.,but that doesn't mean that the chaos module that might be released from doepfer will be similar to that from wiard,right??all modular developers release lfo's,env's,vco's,but there are many differences...also,for the modular fans here in europe, is much cheaper to bu
2002-01-16 by bakis Sirros
hi david, i really want to hear your suggestions!!! ...and yes!i think/hope that it will be kind of similar to the source of uncertainty... synthfreak --- david.salter@reuters.com wrote: > > Wonderful. > > If it provides a similar spec to the Buchla Source > of Uncertainty I will
2002-01-16 by david.salter@reuters.com
Wonderful. If it provides a similar spec to the Buchla Source of Uncertainty I will be a happy man. I will dig out some notes I made on chaos theory and then make some suggestions. Can't wait. David synth_freak_2000 cc: Subject: [Doepfer_a100] CHAOS GENERATOR MODULE!! 16/01/2002
2002-01-16 by synth_freak_2000
hi list, dieter doepfer informed me yesterday that they are seriously thinking of releasing a chaos generator module!!! any comments,thoughts,ideas??? synthfreak athens-greece [Doepfer_a100]group moderator
2002-01-16 by davevosh@aol.com
In a message dated 1/15/2002 3:24:04 PM Eastern Standard Time, synth_freak_2000@yahoo.com writes: > ,please VOTE AND SUGGEST!! > synth_freak, i have sent mr. doepfer some e-mail with ideas about sensor keyboard and modules but, as i had mentioned to you earlier, i can`t vote in t
2002-01-15 by bakis Sirros
HI LIST, DIETER DOEPFER say: "...Of course I watch the polls of the group and the polls and opinions will definitely influence the development of the next modules. But at the moment we are swamped with work because due to the sensor keyboard and the motor fader controller. We wil
2002-01-14 by davevosh@aol.com
In a message dated 1/13/2002 3:29:38 PM Eastern Standard Time, clone45@hotmail.com writes: > > all the basic logic (and/or/xor) > clocked/unclocked random gate generator bret, elaboration on these area`s would be of particular interest to me. i think the whole area of random volt
2002-01-14 by bakis Sirros
hi linium, i don't think that 0-5 volts is a problem!with these 5 volts you have a range of 5 octaves!!!unless you need 12 octaves for your vco's... also,the 8 bit resolution is intended and not to be rounded by a slew limiter,right?? the real problem is the price!!for me 400-500