Re: [QuadtoneRIP] Re: Love or hate QTR?
2010-06-21 by Ken Lee
If you haven t read this, you ll find it very helpful: http://www.diallophotography.com/pdfs/QTRworkflow.pdf ... [Non-text portions of this message have been
Messages
Browse messages
Page 146 of 318 · 15852 messages matched
Re: Love or hate QTR?
2010-06-21 by Frank
I used Epson matte ink. The 3880 switches blacks automatically.
Quadtone 2.7 & photoshop CS5 mac
2010-06-20 by boyooso
Are the 2 compatible? I recently upgraded form CS3, and I can t print from CS5. Photoshop sez : The bundle Quadtone couldn t be loaded because it doesn t
Re: [QuadtoneRIP] Re: Love or hate QTR?
2010-06-20 by John Beeching
I recently moved from a 2100 on which I had been using QTR successfully for many years to a 3880 and have had none of the problems using QTR on the latter. I
Re: [QuadtoneRIP] Re: Love or hate QTR?
2010-06-20 by Ken Lee
Perhaps the 3800 doesn t need matte ink for matte paper, but I found that on my R2400, using the right ink for the matte paper - and adjusting the image while
Re: Love or hate QTR?
2010-06-20 by Frank
I just bought a 3880 also. My experience is much like yours. My first prints with QTR on Epson Enhanced Matte had a nice tonal range. Whites were white and
Love or hate QTR?
2010-06-19 by Troy
Hi folks: Just recently purchased an Epson 3880. I d like to say that I absolutely love Quad Tone Rip. Really, I would. I ll try to keep things factual, as
Can't install ICC profiles
2010-06-18 by Troy
Hi folks: The last time I used to QTR was probably with an Epson 4000, so it s been a while. I just recently purchased a 3880. The first profile I created
Re: [QuadtoneRIP] Re: How to use Gray_Photo_Paper.icc and Gray_Matte_Paper.icc.
2010-06-17 by Roy Harrington
Hi Frank, Separate. You must use a paper curve on the driver page. This is an integral part of how ink is to be used. Even if the paper is not the same as
Re: How to use Gray_Photo_Paper.icc and Gray_Matte_Paper.icc.
2010-06-17 by Frank
Roy can you help ?
Measuring devices
2010-06-17 by Mr_Misty_44
After all is said and done has any measuring device shown itself to work best with QTR when making profiles besides the 1One? John Harvey
Re: How to use Gray_Photo_Paper.icc and Gray_Matte_Paper.icc.
2010-06-16 by Frank
Roy can you help?
QTR 2.7.0 with CS4 and Mac OS 10.5x
2010-06-14 by Joe
Hi, The release notes warn us of printing problems with the above combination and recommends that we print from CS3. I only have CS4, and have not installed
Re: How to use Gray_Photo_Paper.icc and Gray_Matte_Paper.icc.
2010-06-14 by Frank
Roy, Thanks. Let me be sure I understand. QTR has some built in paper curves (i.e. EEnhMatte, HPhotorag, etc). Are the two gray.icc to be used instead of these
Re: [QuadtoneRIP] Re: How to use Gray_Photo_Paper.icc and Gray_Matte_Paper.icc.
2010-06-14 by Roy Harrington
Hi Frank and Catherine, The two Gray and two RGB icc profiles that come with QTR are generic printing profiles that can compensate for the dmax s of either
Re: Mac OSX 10.6.3 -Epson 1400-Quadtone rip-Photoshop Elements 8 compatibility ?
2010-06-13 by coperia8
Hi Harry and Ken Thanks a lot for your responses. I think I ll give it a try, and will be back to tell you how it goes. Pascal
Re: How to use Gray_Photo_Paper.icc and Gray_Matte_Paper.icc.
2010-06-13 by Frank
I do not know - that is why I asked how to use these. Are they for soft proof only? For Mac only? Roy, can you help? Frank I am on Windows 7 64 bit platform.
Re: [QuadtoneRIP] Re: How to use Gray_Photo_Paper.icc and Gray_Matte_Paper.icc.
2010-06-13 by Catherine Costolo
Frank, I just thought of something. Could one be for glossy paper and the other for matte? Catherine Catherine Costolo Independent Beauty Consultant with Mary
Re: [QuadtoneRIP] Re: How to use Gray_Photo_Paper.icc and Gray_Matte_Paper.icc.
2010-06-13 by Catherine Costolo
Frank, go to the website of Amadou Diallo (www. diallophotography.com. He has a workflow for QTR with the 3800 on a Mac. I do not know what platform you are
Re: B/W negative scan
2010-06-13 by Eric
There is no one best answer as it depends on the neg, subject & scanner. I always scan in RGB on my drum scanner but from there I will either pick the best
Re: How to use Gray_Photo_Paper.icc and Gray_Matte_Paper.icc.
2010-06-13 by Frank
... ?
Curves for Canson Infinity RAG Photographique - Epson R2400 ?
2010-06-12 by KennethL
Does anyone have curves for Canson Infinity Rag - for an Epson R2400 ?
Curves for Canson Infinity RAG Photographique - Epson R2400 ?
2010-06-12 by Ken Lee
Sorry - I meant Canson
Re: [QuadtoneRIP] B/W negative scan
2010-06-12 by Wm Thomas Mills
Michael, what scanner are you using? What are the negative sizes and how large do the prints need to be? Tom ... From: Michel Lefrancq
B/W negative scan
2010-06-12 by Michel Lefrancq
Hi, There is some B/W negatives I have to print. Some people say to scan in grayscale, others with RGB colours. Does anybody have any experience in this
How to use Gray_Photo_Paper.icc and Gray_Matte_Paper.icc.
2010-06-11 by Frank
I am new to QTR. I have an Epson 3880. I have read the documentation and read lots of info here. I am confused by the various references in this yahoo group to
Thanks (N/T)
2010-06-09 by Frank
Re: [QuadtoneRIP] New to QTR - Paper Question
2010-06-09 by Roy Harrington
Hi frank. The curves are very portable. Just choose one for some similar paper. Roy
Re: New to QTR - Paper Question
2010-06-09 by Frank
bump
New to QTR - Paper Question
2010-06-06 by Frank
Am I limited to the papers that are listed in the curve drop down box? I have some Epson papers that are not listed. Thanks Frank
Re: Problems with QTR and Epson 4000
2010-06-02 by jomfoto
it s not QTR solarizing your prints it s many other printer drivers (assuming you have multiple printers) my brother laser printer makes it happen too when you
Yellow ink out of register on R1900?
2010-06-01 by gmikol
OK...so I m really new to digital negatives and QTR (like only started a couple of weeks ago). I created a curve with PK and Y on my R1900 to try and get more
Problems with QTR and Epson 4000
2010-05-31 by chrismaldonado18
Hello, I just re- installed QTR in my computer and it messed up with all other icc profiles. If I print a color photograph using Hahnemuhle or Innova icc
Problems with QTR and Epson 4000
2010-05-31 by chrismaldonado18
Hello, I just re- installed QTR in my computer and it messed up with all other icc profiles. If I print a color photograph using Hahnemuhle or Innova icc
Re: [QuadtoneRIP] Re: QTR Newbie, R1900 and micro-banding
2010-05-28 by Michael King
Yes the PK ink is probably the one to use. Mike ... [Non-text portions of this message have been removed]
Re: QTR Newbie, R1900 and micro-banding
2010-05-28 by gmikol
Thanks for the tips, Mike. The nozzles checked out completely clean. I ll be sure to shake the cartridges when I need to replace one. It looks like the cause
Re: [QuadtoneRIP] Re: 3880 vs 1400
2010-05-28 by Dana Rasmussen
Advanced B&W mode is part of the Epson Print Drive, which you are not using. The QTR replaces that. QTR is a much more sophisticated and repeatable B&W
Re: 3880 vs 1400
2010-05-28 by Frank
Thanks. What about Advanced Black and White Mode with QTR? Frank
Re: Mac OSX 10.6.3 -Epson 1400-Quadtone rip-Photoshop Elements 8 compatibility ?
2010-05-28 by hflockwood
Ken, I can only speak to part of your message. I m using an R2400, Leopard and Cone s K7 Neutral inks in a CIS. Last summer I was away for weeks at time and
Re: [QuadtoneRIP] QTR Newbie, R1900 and micro-banding
2010-05-28 by Michael King
Hi Greg, If you have inks in all the slots, try running an auto head check on a piece of plain paper. This is a much better indicator of nozzle status. Also
QTR Newbie, R1900 and micro-banding
2010-05-28 by gmikol
Hi All-- I just bought a used R1900 and have started working with QTR, primarily for digital negatives. I ve run a cleaning cycle and a head check. Everything
CS3 10.5.8 v CS5 10.6.3
2010-05-27 by Walker Blackwell
I have noticed some major differences between CS3 printing on 10.5.8 and CS5 printing on 10.6.3 with the same custom grayscale profile built from a target
Re: Mac OSX 10.6.3 -Epson 1400-Quadtone rip-Photoshop Elements 8 compatibility ?
2010-05-27 by ksulliva2
Hi Coperia, I have had this configuration (Leopard) for the past year and one-half. Sometimes I get good prints, and sometimes not. I print from Lightroom, but
Mac OSX 10.6.3 -Epson 1400-Quadtone rip-Photoshop Elements 8 compatibility ?
2010-05-26 by coperia8
Hello I m a newbie here, being very interested in black & white photography, I intend to buy an Epson 1400 printer for printing with piezography K6 Cone inks.
Re: [QuadtoneRIP] any issues with Windows 7 64 bit?
2010-05-26 by Richard Vanek
I am using latest QTR with Win7 Pro.64bit No issues works well. -- Richard Vanek portfolio: www.richard-vanek.eu twitter: http://twitter.com/richo_67 facebook:
Moab Moenkopi Kozo and UT14
2010-05-25 by Edson
Does anyone have experience profiling Epson 1400 with UT14 inks to print on Moab Moenkopi Kozo 110 gsm?
Re: Adding a frame to the print output
2010-05-25 by Patrick
... Thanks Don. I ll have a look at Key-Wrect. -- Patrick
Re: Adding a frame to the print output
2010-05-24 by Don
Patrick, ... Key-Wrect! Create a canvas and work with that or use one of those PS border plugins. Don Bryant
any issues with Windows 7 64 bit?
2010-05-24 by tim_gray
QTR is a must have application I use to print negatives for platinum/palladium. I m about ready to upgrade my Win PC to 64 bit windows 7 from 32 bit Vista.
R1400 With UT14 Inks For sale
2010-05-23 by linuxgangster
Hey Guys, I recently got a Epson 7900 and need to make room. I have a Epson 1400 with a set of UT14 inks for sale. You will get a slightly used 1400 with