RE: [QuadtoneRIP] UT-7 / XP / QTR ?
2007-03-20 by Roger L Sopher
_____ From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On Behalf Of djon43 Sent: Tuesday, March 20, 2007 9:19 AM To:
Messages
Browse messages
Page 236 of 318 · 15852 messages matched
Re: QuadTone 2.5 win
2007-03-20 by lindstromdick
I am very grateful for the help so far. But some strange things still occur in 2,5. (Earlier version works fine - but I have a 3800 too ...) When I start the
Re: Color printing after installin quadtone rip on 2200
2007-03-20 by francoiscamoin
... re-add. ... I m pretty sure I changed all the settings back to non-Quadtone settings. I did finally resurrect the color printing by switching back to Adobe
Re: Color printing after installin quadtone rip on 2200
2007-03-20 by djon43
I hate to ask this question, are you trying to print color using QTR? It s only for B&W. ... originally installed.
Re: UT-7 / XP / QTR ?
2007-03-20 by mccarvill
I agree the MIS web site is confusing, but QTR works great with XP and UT7. I m using this combo on my 7600 and the prints are excellent.
UT-7 / XP / QTR ?
2007-03-20 by djon43
Inksupply seems to say QTR and UT-7 are a good combo for Mac, but not for XP (see below). Using XP, CS2 and Epson driver give me good results with UT-7, most
New User Problem
2007-03-20 by Douglas (Brian) Heller
I installed 2.5 on my IMac 800 MHZ Power PC running 10.4.9. I am printing on an Epson R 1800. It installed with no problem but the prints produced do not
QTR created -out file for neutral ABW setting
2007-03-20 by Ernst Dinkla
I have made some neutral profiles for HPR printed on the HP Z3100 in ABW mode after the paper was calibrated on the HP Z3100. Media profiles: Litho-realistic
Custom curve and setting UC-7600 and canvas
2007-03-20 by cosmoelsol
Hi, I plan to make some BW prints on HM FineArt Canvas or Epson Premier WR Canvas using my Epson UC-7600 and would like to know the following: 1. Does anyone
Support for BO printing with Claria printers?
2007-03-20 by tzinzunzan2006
Are there any plans in the works for QTR support for BO printing on the new Epson printers that use the Claria inkset? Chris Hargens
QuadToneRIP version 2.5.1 Release, Mac & PC
2007-03-20 by Roy Harrington
There s a new release. Highlights are: Many new profiles for R2400 and 3800 printers with UC-K3 inks. See release notes:
RE: [QuadtoneRIP] Re: problem installing version 2.5 of qtr
2007-03-19 by Stephen Billard
OK, I see (from your email address) what the problem is. You use a comma, not a decimal point as the decimal delimiter. Roy is working on a 2.5.1 release. I ll
Re: problem installing version 2.5 of qtr
2007-03-19 by rogerio_tomazela
Hi Stephen, Only to report: I have the same problem here after update to version 2.5.0.9. I am using Epson 9600 and Neutral K7 inks. I have edited the
RE: [QuadtoneRIP] Problems getting proper curve
2007-03-19 by Tom Moore
Stasunas It sounds like you have created the curve correctly as described by the manual. However, since the manual was written, there is an additional step
Color printing after installin quadtone rip on 2200
2007-03-19 by francoiscamoin
The thing now prints beautiful BW, but refuses to print color. Did the following: Selected Stylus Photo 2200 Followed normal pre-quadtone workflow Message from
Re: Problems getting proper curve
2007-03-19 by Jeff Randall
I m not sure I understand what you are doing with the Excel spreadsheet, but I suggest that you load the measured densities into the QTR Curve Creator
Problems getting proper curve
2007-03-19 by stasunas
I am having problems getting a curve that doesn t flatten out the shadows for my images. I am using Condor BW with an Epson 7600 and UC inks with Matte Black.
Apologies-Post sent to wrong group
2007-03-19 by fuji20185
My apologies to this group as I just sent a post that was for the Epson list and that perhaps Roy Harrington might be on this list. If so or if there is
Desperately seeking Denver Dan--or some-one who can help in installing QTR 2nd p
2007-03-19 by fuji20185
Hi , I am desperately looking for Denver Dan as apparently He s the man who knows or anyone who might be able to help. I am using QTR / N.K. inks and have
Matte paper scraped by printhead (1280)
2007-03-19 by Rob
I m having the same problem described by others on my Epson 1280, but none of the suggested solutions seem to work. The printer is already on the thick paper
Re: [QuadtoneRIP] This is an opportunity not to miss
2007-03-17 by Mark Savoia
SPAM!
Re: QuadTone 2.5 win
2007-03-16 by Jeff Randall
Of course I meant to type .qidf. Also, both .qidf and .quad files can be opened with a standard text editor if you are curious about the internals.
Re: QuadTone 2.5 win
2007-03-16 by Jeff Randall
Assuming you did a standard Windows install, the QTRgui editable profile files (.qdif) are in QuadToneRIP|Profiles. The inking profiles/curves used by QTRgui
Re: QuadTone 2.5 win
2007-03-16 by lindstromdick
Well, that folder is not in my computer after installation. I have tried to download the software twice, but no curves folder to be found. dick ... need ...
Re: Epson 7600 will only print 7% of image. Any Suggestions?
2007-03-15 by dave_polcyn
When I was having similar problems I read that you can reset your printing system from the printer setup utility, which empties out the whole thaing including
Epson 7600 will only print 7% of image. Any Suggestions?
2007-03-15 by grnbrg2
I installed QTR on my Mac yesterday, and have been able to print about five 8x10 images. Since then I have only been able to print 7% of each image. I
RE: [QuadtoneRIP] Quadtone won't fully open
2007-03-15 by Stephen Billard
Is your screen height less than 768 pixels? That s the smallest that works. -Stephen www.sbillard.org/Stephen _____ From: QuadtoneRIP@yahoogroups.com
Re: [QuadtoneRIP] Re: Matte paper scraped by printhead
2007-03-15 by David Polcyn
Thanks to Matt and Gary for your input Matte. I reset my printer system and reinstalled both the Epson and QTR software and it seems to be working now after I
Re: [QuadtoneRIP] Matte paper scraped by printhead
2007-03-15 by David Polcyn
Dear Mr. Harrington, Thanks for your help. Since the note in QTR says that you don t have much info on the Epson R800, I will share my experiences so far.
Re: Printing with ONE black only (Epson 9800)??
2007-03-14 by Joost Horsten
... Never worked with an 9800, but I wouldn t see a reason why this wouldn t be as simple as I did with my Epson 2100 + QTR. Again, I don t know about existing
Re: [QuadtoneRIP] Re: Why are Epson 2200 prints too dark
2007-03-14 by Kyle Rhorer
Roy Harrington wrote: This is just like any color printing that you do. The only thing different is that you are not printing directly from PS Print with
Re: [QuadtoneRIP] Re: Printing with ONE black only (Epson 9800)??
2007-03-14 by Truszkowski
My needs are different, you are correct. I am familiar with using continuous-tone negs or positives (produced both digitally and the old-fashioned way) for my
Re: Printing with ONE black only (Epson 9800)??
2007-03-14 by koloshor
... I m very used to making digital negatives for platinum and gum. Normally, we want maximum ink load for the smoothest tonalities, and use as many blacks as
Printing with ONE black only (Epson 9800)??
2007-03-14 by Truszkowski
Hi, I am using a G5 Mac, OSX.4 and Photoshop CS2 to print on special clear film for exposing positives in several alternative photo processes:screenprinting,
installation issues /mac os.4.8. G4 epson 1800
2007-03-14 by fuji20185
Hi, I am re-installing after re-formating my HD, epson driver is installed and shows up. QTR says it has installed successfully but when I go to print does
Re: [QuadtoneRIP] Tonal reversal with some papers
2007-03-14 by Mark Savoia
I was having weird problems with the Portfolio Rag also for color profiling. I tried the canned one from Cranes and it looked awful, made my own it looked
Quadtone won't fully open
2007-03-14 by epnpalaz
When I try to open Quadtone only the top two or three inches are on the monitor screen.Dynamic rolldown is checked,but it doesn t work. Using version 2.5.0.9
Tonal reversal with some papers
2007-03-14 by john dean
After outputting a 20 step grey scale for making a K6 QTR curve I see that the paper in question - the new Crane Museo Portfolio Rag - reverses density in the
Sizing issues - Epson 4000 - Mac
2007-03-14 by graham_holder
I posted a request for help or information regarding sizing issues a couple of weeks ago. My email box is full of other strings but no response on this. Has
Re: [QuadtoneRIP] Creating new QTR profiles for Epson 4000 w/Piezo K7 inks
2007-03-13 by Scott Schroeder
I was able to extract data from the quad files to make a qidf file. Awhile back I uploaded one of the curves into the files section for the 2200 called
Re: [QuadtoneRIP] Creating new QTR profiles for Epson 4000 w/Piezo K7 inks
2007-03-13 by Carl Schofield
Tom, If you think it might be useful to others please do put it in the files section. I extracted the numbers from a file for the 2400 printer so I don t
RE: [QuadtoneRIP] Printing Frustrations
2007-03-13 by Tom Moore
Peter In his most recent post Carl Schofield offered to easiest solution to your problem. Just start with the QIDF file that was part of his email. 1. convert
RE: [QuadtoneRIP] Creating new QTR profiles for Epson 4000 w/Piezo K7 inks
2007-03-13 by Tom Moore
Carl This would be a useful addition to the files section. Do you mind if I do that? Tom Moore
Re: Printing Frustrations
2007-03-13 by Lotusm50
Have you calibrated/profiled your monitor? That could be the source of your problem.
Printing Frustrations
2007-03-13 by phkowalchuk
I apologize for the length of this at the start... I m not a technical genius, but I m not a total techno-dork, either. I just can t seem to get prints out of
QTR and Epson 3800
2007-03-13 by larry_chait
I ve been using a prior version of QTR successfully for some time with my Epson 2200. I recently purchased a 3800 and downloaded the new version of QTR which
Re: Matte paper scraped by printhead
2007-03-13 by Gary A. Reese
I can get scraping on my 4800 using Enhanced Matte paper when the head passes over and over the print after its final step advance. In another words, at that
Re: [QuadtoneRIP] Creating new QTR profiles for Epson 4000 w/Piezo K7 inks
2007-03-13 by Carl Schofield
Some of us have made generic profiles for the K7 inks using existing K7 .quad file curves. A bit tedious to make the first one, but once you have a basic
Creating new QTR profiles for Epson 4000 w/Piezo K7 inks
2007-03-13 by Lotusm50
I would like to create a couple new QTR profiles for use with a Epson 4000 loaded with Piezography K7 inks. The users guide suggests, Curves in their editable
Re: [QuadtoneRIP] Using Black & White settings in camera
2007-03-13 by Brian Ellis
Anybody else do this or are we all RAW snobs? Neither. T Max 100 or HP5+. ... From: jomphoto To: Sent: