Yahoo Groups archive
Messages
Page 19 of 168 · 8362 messages matched
2010-02-20 by Colin Fraser
> Colin, 4 questions about Cirklon.... > > -Will one be able to record into Cirklon with a midi keyboard > and then apply quantization afterwards? Ultimately yes. It's not implemented yet, so all the planned new features may not appear with the next units to ship, but the work is
2010-02-20 by THX1742
Arrrggghhhhh. That looks soooooo tasty. Sod's law that I should finally, after all sorts of delays, be nearing completion of my P3 build to have this come out, which of course is now top of the "wants" list. I apologise for the selfish nature of this post ;) Peter.
2010-02-20 by Jack Johnaldson
How much will this beautiful device cost I want one Jack Johnaldson On Feb 19, 2010, at 1:58 PM, "Steven C" wrote: If there's s list forming... I hope I'm on it Colin :) Steve --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > You've maybe not seen this either:
2010-02-19 by Steven C
VERY nice! http://www.sequentix.com/cirklon.htm I can imagine a HUGE demand starting... for the Cirklon... is there a list forming to purchase? Steve [Non-text portions of this message have been removed]
2010-02-19 by Steven C
If there's s list forming... I hope I'm on it Colin :) Steve --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > You've maybe not seen this either: > http://www.sequentix.com/cirklon.htm > > Best regards, > Colin Fraser > Sequentix Music Systems Ltd > http://www.
2010-02-19 by Richard Scott
CV input?? Very interesting. The reason I stopped using the P3 was because I moved from midi to CV as the centre of my system. I would certainly be interested in an option that gave multiple (i.e. more than two) CV gates and outputs and to have a couple of CV inputs too would be
2010-02-19 by Colin f
> Nice! What's the I/O Expansion port for? The expansion port will provide either 2 pairs of CV and gate outputs, or a 9-pin D socket carrying a high-speed serial line (most likely SPI on LVDS drivers). The serial port will drive a multi-channel CV output (and possibly input) box
2010-02-19 by Rory Dow
Nice! What's the I/O Expansion port for? On 18 Feb 2010, at 23:31, "Colin Fraser" wrote: > You've maybe not seen this either: > http://www.sequentix.com/cirklon.htm > > Best regards, > Colin Fraser > Sequentix Music Systems Ltd > http://www.sequentix.com > > > -----Original Messa
2010-02-19 by Ditton33
Perhaps an optional add-on with lots more knobs and flashing lights to allow concurrent direct access to multiple track manipulation? :) Perhaps they can be daisy-chained too? :D > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequenc
2010-02-18 by Richard Scott
Slick, even if its just a mock up it looks very good - I wonder, did you think about those nice serge-style davis knobs? - they would stand a bit higher than the soft-grip ones and look cooler too. As an interface it looks so much nicer than the P3, I'm hoping the workflow will b
2010-02-18 by Colin Fraser
You've maybe not seen this either: http://www.sequentix.com/cirklon.htm Best regards, Colin Fraser Sequentix Music Systems Ltd http://www.sequentix.com > -----Original Message----- > From: analogue-sequencer@yahoogroups.com > [mailto:analogue-sequencer@yahoogroups.com] On Behalf
2010-02-18 by Richard Scott
Not sure if anyone posted this yet: http://www.thebeast.co.uk/cnc/cirklon.jpg tasty! Richard -- I am using the free version of SPAMfighter. We are a community of 6 million users fighting spam. SPAMfighter has removed 1486 of my spam emails to date. Get the free SPAMfighter here:
2010-02-18 by Mark Pulver
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170448052048 Please email me directly with any questions. Thanks for looking! Mark
2010-02-18 by Colin f
> >>I did plan at one time to add some user slots for macros, where you > >>would be able to save the current aux settings from the pattern for > >>later recall. > damn. presumably no plans to do that now? Not unless I win the Euromillions. Then I'll have one of my dev team do it
2010-02-18 by duncan
>>I think it's function + aux a/b/c/d (you just get to skip going to the aux page on the top row.
2010-02-18 by duncan
>>The aux macros are accessed in edit mode with FUNC + UPPER ROW. You scroll through the preset list with the DATA knob. >I did plan at one time to add some user slots for macros, where you would be able to save the current aux settings from the pattern for later recall. >There i
2010-02-18 by Colin f
> can't find it, or maybe I imagined it, but I thought there > was a document somewhere explaining how to set up the auxes > using a macro function. The aux macros are accessed in edit mode with FUNC + UPPER ROW. You scroll through the preset list with the DATA knob. I did plan a
2010-02-17 by Josh
I think it's function + aux a/b/c/d (you just get to skip going to the aux page on the top row. It's been awhile since I've sat with my P3, getting into the elektrons pretty hard... On Wed, Feb 17, 2010 at 12:21 PM, duncan wrote: > > > can't find it, or maybe I imagined it, but I
2010-02-17 by Jesse
The occasional viagra or watch related spam is somewhat amusing I must admit, especially on a yahoo group. ----- Original Message ----- From: paul To: analogue-sequencer@yahoogroups.com Sent: Wednesday, February 17, 2010 12:01 PM Subject: [analogue-sequencer] Re: best online shop
2010-02-17 by duncan
can't find it, or maybe I imagined it, but I thought there was a document somewhere explaining how to set up the auxes using a macro function. if anyone knows where it is or can write a quick explanation, put it here where folks can find it by the thread title. I will c&p it into
2010-02-17 by paul
sorry about this Colin and list I will try an keep my infections to my self cheers Paul --- In analogue-sequencer@yahoogroups.com, "Colin f" wrote: > > Looks like someone has picked up a spambot virus... > > > > -----Original Message----- > > From: analogue-sequencer@yahoogroups.
2010-02-16 by Colin f
Looks like someone has picked up a spambot virus... > -----Original Message----- > From: analogue-sequencer@yahoogroups.com > [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of paul darlow > Sent: 16 February 2010 15:42 > To: analogue-sequencer@yahoogroups.com > Subject: [a
2010-02-14 by Softroom
Rory wrote: > Thanks Paul. A tweak of the Rcrd param in Thru Conf did the trick. Ah yes, it's possible I had it set to record only from incoming channel 12 or something. Can't remember. :) -- Paul --- http://www.myspace.com/smokyfrog http://www.youtube.com/WilyEPeyote
2010-02-14 by Rory
Thanks Paul. A tweak of the Rcrd param in Thru Conf did the trick. cheers, Rory > > Well, I would typically just hit record but don't make record "live" > (F1) then it should be setup to rechannelise by selected track. There > are other thru options too but can't remember them al
2010-02-13 by Softroom
rory_dow wrote: > Actually I do have my first question (see it didn't take long - the first of many I'll wager). > > In my setup I have a master keyboard connected to the P3 midi input via which I'd like to use to play all the gear connected to the P3 output. The keyboard connect
2010-02-13 by rory_dow
Actually I do have my first question (see it didn't take long - the first of many I'll wager). In my setup I have a master keyboard connected to the P3 midi input via which I'd like to use to play all the gear connected to the P3 output. The keyboard connected always sends out on
2010-02-13 by Softroom
Ditton33 wrote: > Paul, are you totally bereft of P3s now? :O :) As of right now all my spare brain resources are directed into thinking about Cirklon, getting ready to start a whole new pestering regime. For those who don't know: Colin not only has a brain the size of a planet,
2010-02-13 by Softroom
rory_dow wrote: > I've just purchased one of Paul Nagle's P3s. I've had it just under a week now and I'm having loads of fun. Huge thanks to Paul for taking the time to show me a few things when I went there to pick it up. P3 serial number #1005 has a nice new home and will be ta
2010-02-13 by Ditton33
Paul, are you totally bereft of P3s now? :O :) > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of Softroom > >Sent: 13 February 2010 10:02 > >To: analogue-sequencer@yahoogroups.com > >Subject: Re:
2010-02-12 by rory_dow
Hi all, This is just a 'hello' post really *waves* I've just purchased one of Paul Nagle's P3s. I've had it just under a week now and I'm having loads of fun. Huge thanks to Paul for taking the time to show me a few things when I went there to pick it up. P3 serial number #1005 h
2010-02-12 by duncan
>>blind holes then no screws on the panel
2010-02-10 by boops.secretvibes
Hi,if you see my p3(gold ed) you can use blind holes then no screws on the panel regards --- In analogue-sequencer@yahoogroups.com, "duncan" wrote: > > well, the front's finished & wearing the second (smaller) set of knobs. one of the large ones has been kept for the data encoder
2010-02-10 by duncan
well, the front's finished & wearing the second (smaller) set of knobs. one of the large ones has been kept for the data encoder, while the tempo pot is a cut-down replacement. the rest of the case will arrive next week, I'm told. I will do my other P3 (probably in gold or green)
2010-02-08 by boops.secretvibes
Hi my built P3 is around 10 -15 DEGREE in the file "photo" boops ed gold it's a 3U Best regard --- In analogue-sequencer@yahoogroups.com, "colinfraser_com" wrote: > > Hi folks, > > I'm looking at a couple of different possible approaches to the production case for Cirklon, but on
2010-02-08 by Ditton33
The on/off switch is no biggie. I only mentioned it because Paul would have griped about it in the SOS review. ;) Now it will be listed as a feature. :D > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com] On Beh
2010-02-08 by Softroom
duncan wrote: > the other thing- I moved the data & tempo controls round to the side of the display/function keypad. this means fewer accidents when adjusting the controls of something adjacent in the rack, or else (if you're desktop-ing) they're just harder to bump by accident.
2010-02-08 by Colin Fraser
> I'd vote for either a "soft" tempo control or else a multi-turn pot. There was a dedicated tempo knob on the first prototype Cirklon, but I reassigned it to be a second sculpt pot over to the right. No-one who saw that prototype seemed to think a dedicated tempo knob was the be
2010-02-08 by duncan
>>Only thing I'd ask for is a front panel on/off switch. :)
2010-02-08 by Ditton33
Hi Colin Good idea to seek feedback. I've voted in all the polls. Regarding the case config vote desktop/rack, I voted rack, but if there was a "both" option I'd have chosen that. The flexibility of the P3 in this regard is excellent, I initially used it desktop for a few years,
2010-02-08 by colinfraser_com
Hi folks, I'm looking at a couple of different possible approaches to the production case for Cirklon, but one thing I've never been too sure about is the popularity of rackmount or desktop use for P3. I'm going to create a poll here to find out - please take a few seconds to let
2010-02-08 by analogue-sequencer@yahoogroups.com
Enter your vote today! A new poll has been created for the analogue-sequencer group: Wooden end cheeks ? o Essential component of music gear o Nice optional extra o Waste of a tree To vote, please visit the following web page: http://groups.yahoo.com/group/analogue-sequencer/surv
2010-02-08 by analogue-sequencer@yahoogroups.com
Enter your vote today! A new poll has been created for the analogue-sequencer group: Desktop users - what is your opinion on the slope of the P3 panel as a desktop unit ? o Should be steeper o Just right o Should be flatter o Should be adjustable To vote, please visit the followi
2010-02-08 by analogue-sequencer@yahoogroups.com
Enter your vote today! A new poll has been created for the analogue-sequencer group: Rackmount users - how important is it to have the I/O connections not take up any rack space ? o Very important o Useful o Don't care o Would rather have them where I can see them To vote, please
2010-02-08 by analogue-sequencer@yahoogroups.com
Enter your vote today! A new poll has been created for the analogue-sequencer group: How do you have your P3 case configured ? o Desktop o Rackmounted To vote, please visit the following web page: http://groups.yahoo.com/group/analogue-sequencer/surveys?id=2589628 Note: Please do
2010-02-07 by jimcombsus
My latest double CD "Singularity" w/ master musicians Jez Creek and Kevin Haller is released and available free: From Earth Mantra Netlabel- As we've written many times, one of the great pleasures of running a netlabel is to meet new artists and release their music. A related ple
2010-02-06 by jimcombsus
3rd Annual City Skies Electronic Music Festival, April 29-May 1, 2010 The 3rd Annual City Skies Electronic Music Festival will be held in the Atlanta area on April 29-May 1, 2010. Kavarna in the Oakhurst section of Decatur, GA (minutes away from Atlanta) is once again the venue f
2010-02-06 by duncan
first thing I thought when I saw it was "MAM sq16". http://www.sonicstate.com/synth/mam_sq16.cfm which, if anyone wants one with a small & inconsequential dent in it's front panel, please let me know. duncan. --- In analogue-sequencer@yahoogroups.com, "oozi23" wrote: > > Have a l
2010-02-05 by oozi23
Have a look at the upcoming Analogue Solutions Europa Midi Sequencer. Looks like a pretty interesting machine.. http://www.youtube.com/watch?v=TywnYgaA_3c
2010-02-05 by duncan
chaps- thought I'd share this. I needed to make a bit more space in my rack case & so I started looking at ways to shrink the p3 to a 3U case. I dropped a line to a list member here who has a photo of his p3 in the photo section; he's made his 3U & it matches his doepfer rack gea
2010-02-04 by Tony Scharf
After the auction, I send the guy an offer of $1000 and he refused. He said he got an off e-bay offer for twice that. somehow, I dont believe it... I am looking for one, but I cant currently pay $1000 for it now. Tony On Thu, Feb 4, 2010 at 1:30 PM, Ditton33 wrote: > > > Hi. > >