Yahoo Groups archive
Messages
Page 20 of 168 · 8362 messages matched
2010-02-04 by Softroom
Hehe yeah, I have one for sale too currently in SOS ads. Open to offers, especially if they involve a decent weighted master keyboard... :) Ditton33 wrote: > Hi. > > Good luck with the sale. > > For info, a recent (unused/new) P3 on ebay in the US with a start price of > 1000 dol
2010-02-04 by Ditton33
Hi. Good luck with the sale. For info, a recent (unused/new) P3 on ebay in the US with a start price of 1000 dollars didn't get any bids. Which surprised me. http://tinyurl.com/yeb8f4k The next will probably sell for 2K, ebay is so fickle. In my experience, without exception, the
2010-02-04 by ringmod45
Hi Everyone, I have a fully working factory built P3 in great condition and a partly assembled P3 kit for sale. $1500.00 the P3 and $600.00 for the P3 kit. Regards, RM
2010-01-30 by boops.secretvibes
--- In analogue-sequencer@yahoogroups.com, "boops.secretvibes" wrote: >the file is in DIY section; > Hi i put a led resistor calculator (pdf) in the files section ;best regards Boop's > > > > > --- In analogue-sequencer@yahoogroups.com, "Colin f" wrote: > > > > > > > Thanks for t
2010-01-30 by boops.secretvibes
Hi i put a led resistor calculator (pdf) in the files section ;best regards Boop's --- In analogue-sequencer@yahoogroups.com, "Colin f" wrote: > > > > Thanks for tips ,Colin; which is this resistor on the > > mainboard for the LED matrix ? BEST REGARDS > > There are 8 resistors b
2010-01-29 by fb0y2002
Hi Colin, Many thanks for the reply.. Its not the contrast, as I've had a good play with the trimmer - as for the resistor, well this model already had a resistor in r19, (its the black pre-production unit #004) and to be fair, it didn't cross my mind to check the value of the re
2010-01-28 by Colin f
> Thanks for tips ,Colin; which is this resistor on the > mainboard for the LED matrix ? BEST REGARDS There are 8 resistors between U12 (74HC241) and the socket that connects to the switchboard. Those resistors set the current for all the LEDs on the panel. There should be 4 of 1
2010-01-28 by Colin f
> I bought a new p3 display off you maybe 6 months back, but > its been getting dimmer and dimmer, very slowly, over the > last couple of months - I leave my p3 on a lot, but that > really shouldn't kill it so quick.. Is it the backlight that's getting dimmer, or the contrast of
2010-01-28 by boops.secretvibes
Thanks for tips ,Colin; which is this resistor on the mainboard for the LED matrix ? BEST REGARDS
2010-01-28 by fb0y2002
Hi Colin, I bought a new p3 display off you maybe 6 months back, but its been getting dimmer and dimmer, very slowly, over the last couple of months - I leave my p3 on a lot, but that really shouldn't kill it so quick.. Any clues, or should I just get another ? It's pretty unread
2010-01-28 by Colin f
Hi boops, > As i 've built 2 p3,i find on a up step modes board,the leds > are too much flashing...i took a look on the shematics,but i > can find the main resistor to replace it,for get down the > voltage of the 8 leds (only on this board!) thanks and good > luck with the Cirklo
2010-01-28 by boops.secretvibes
Happy new year all,hi Colin As i 've built 2 p3,i find on a up step modes board,the leds are too much flashing...i took a look on the shematics,but i can find the main resistor to replace it,for get down the voltage of the 8 leds (only on this board!) thanks and good luck with th
2010-01-12 by duncan
>>Hi my name is jack and I would like a decent step sequencer does any one know where I can obtain one
2010-01-12 by Jack Johnaldson
Hi my name is jack and I would like a decent step sequencer does any one know where I can obtain one Thanks, Jack [Non-text portions of this message have been removed]
2010-01-02 by jimcombsus
Brian Good, my P3 and I (Sensitive Chaos) provide the background music to Stephen Hill's opening commentary to the first show of 2010 for Hearts of Space: http://www.hos.com/php/showProgram.php?program=0897 HEARTS of SPACE PGM 897 : "PERIGEE" PGM NOTE : chilled electronica for th
2009-12-29 by Roel
I'm afraid my CPU is dead. I still have a second diy kit here, and I tried that CPU and every seems to work fine again. When I tried the reseruction procedure nothing seems to happen, so I hope I can still buy a new CPU. --- In analogue-sequencer@yahoogroups.com, "Roel" wrote: >
2009-12-28 by Roel
Hi, My P3 doesn't start up anymore. Two days ago I wanted to play with my friends, I had spend 2 days building my machines and P3 in a flightcase, everything matched perfect, but when I powered the flightcase on my P3 frozes at start up. The flightcase came from my car and was co
2009-12-25 by Hans Greuber
Hi FolksI sold my loved SQ 10 last monday. It was unused for lot of years.I tested it and reminded it has 2 dedicated portamento knobs for channel 1 and 2.I sent ( of course) portamento to cv channels.Is this possible with the P3? The only way that comes to my mind is pressing on
2009-12-25 by mathieu16682002
Hello Colin, I've followed your instructions and my P3 came back to life :) Thank you very much, I was so scared really. Happy new year, the best for you and Sequentix Mathieu --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > > > My unit showed a blank screen l
2009-12-22 by julianfincham
I replaced the PLED on my unit only last week (with an LCD that i had knocking about - not the blue kit from colin) and, after a moment of head scratching, i remembered the contrast trimmer, and, sure enough, writing appeared. Incidently, the LCD i used was a varitronix (or howev
2009-12-22 by mathieu16682002
Thank you Colin, I'm going to try this tomorow and tell you since I don't have the P3 at home right now. I hope it's just that..I recently bought the P3 used and I'm not familiar with the unit, it's a fantastic instrument for sure. Much Thanks Mathieu --- In analogue-sequencer@ya
2009-12-20 by Colin Fraser
> My unit showed a blank screen last time I switched it on. It > was the old display so I installed the new blue lcd but it > was the same: the screen lights up but shows nothing. Did you adjust the contrast after fitting the new display ? Did the LEDs light up as normal after yo
2009-12-20 by mathieu16682002
Hello, My unit showed a blank screen last time I switched it on. It was the old display so I installed the new blue lcd but it was the same: the screen lights up but shows nothing. I tried the "P3 resurection" tutorial I found here but it didn't work so I tried a new firmware ins
2009-12-16 by Softroom
Richard Scott wrote: > Hi paul > > does the hammerfall come with an expresscard? I did get offered one of those by one of the guys on the Wavelab beta list. Mine is with the PCI card but I could find out how much the card option would be if you like. It's definitely the best audi
2009-12-16 by Richard Scott
Hi paul does the hammerfall come with an expresscard? Richard Softroom wrote: > > > Well well, it's getting time to clear the decks of stuff not being used > much. This is the first batch; could be more: > > Sequentix P3 - nice production unit, has been gigged but in good > condi
2009-12-16 by Softroom
Well well, it's getting time to clear the decks of stuff not being used much. This is the first batch; could be more: Sequentix P3 - nice production unit, has been gigged but in good condition, has been my "number 2" for a long time. £750 Metasonix TM2 - vacuum tube band pass fil
2009-12-10 by Hans Greuber
Hi Colin.Ok I �ll wait.But As I had one of the early kits available and P3, I'll might have the new one either.My P3 is still with the screen replacement...See you To: analogue-sequencer@yahoogroups.com From: colin@sequentix.com Date: Wed, 9 Dec 2009 21:03:49 +0000 Subject: RE: [
2009-12-09 by Nick Rothwell
On 9 Dec 2009, at 21:03, Colin Fraser wrote: > The good news is that the first CPU board is booting up, speaking to > its > display and passing a RAM test. I do hope it's saying "Hello World." -- N.
2009-12-09 by Colin f
> Is that enough? :D Well if you count the tri-colour LEDs as two, it's really 105. I hope that's sufficient. Cheers, Colin
2009-12-09 by Ditton33
Is that enough? :D > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of Colin Fraser > >Sent: 09 December 2009 21:04 > >To: analogue-sequencer@yahoogroups.com > >Subject: RE: [analogue-sequencer] Re:
2009-12-09 by Colin Fraser
> Hi ColinHow much would you ask for the assembled by > yourself? I'll know the answer to that in a few more days. I have to time how long it takes to assemble one. The good news is that the first CPU board is booting up, speaking to its display and passing a RAM test. But I stil
2009-12-09 by Hans Greuber
Hi ColinHow much would you ask for the assembled by yourself?By the way I got a Devilfish TB 303 for sale...ThanksHans To: analogue-sequencer@yahoogroups.com From: mengqimusic@gmail.com Date: Sat, 21 Nov 2009 16:25:34 +0000 Subject: [analogue-sequencer] Re: Cirklon news This is r
2009-12-07 by orgon1
Hi All for sale is one of my DIY P3's with MemX expansion installed Built by me many years ago and in good working order latest operating system installed No power supply with this one Im asking £550 + shipping prefer bank transfer or cheque but will take PayPal with fees Photos
2009-12-06 by Colin Fraser
> Several pots on my P3 are changing values when I'm not touching them. > It's been going on for a few months but is now more annoying > than I can deal with. > It probably just needs cleaned .I've tried wiggling the knobs > regularly to free any debris that may be trapped but it
2009-12-05 by acidmitch
Hey Ya'll, Several pots on my P3 are changing values when I'm not touching them. It's been going on for a few months but is now more annoying than I can deal with. It probably just needs cleaned .I've tried wiggling the knobs regularly to free any debris that may be trapped but i
2009-11-29 by Softroom
duncan wrote: >>> that one was done with the genoQs Nemo sequencer. you bought one? or was this the loaner/review model? Nah, didn't buy one. It was done during the review period and although I liked it, it just doesn't fit my way of working. -- Paul --- http://www.myspace.com/sm
2009-11-29 by duncan
>>that one was done with the genoQs Nemo sequencer.
2009-11-26 by Softroom
jimcombsus wrote: > These are all great (as usual). Turtled is my new fav! Amusingly enough (well I laugh at anything), that one was done with the genoQs Nemo sequencer. :) -- Paul --- http://www.myspace.com/smokyfrog http://www.youtube.com/WilyEPeyote
2009-11-26 by jimcombsus
--- In analogue-sequencer@yahoogroups.com, Softroom wrote: > > Dudes, > > some new tracks on my myspace (below). The first three are being worked > on mostly but even in this incomplete state there's something different > doncha think? Or still too complicated? :) These are all g
2009-11-26 by jimcombsus
Echoes is running their Best of Echoes 2009 poll. My Sensitive Chaos CD Emerging Transparency is one of the many great albums you can vote for this year and win a chance at prizes. http://www.surveymonkey.com/s.aspx?sm=Rj5Dj1XPBykAic7ya5RT5g_3d_3d Happy Holidays! -Jim http://www.
2009-11-22 by Softroom
Dudes, some new tracks on my myspace (below). The first three are being worked on mostly but even in this incomplete state there's something different doncha think? Or still too complicated? :) Using P3x2, Electribes, Restyler, Moogerfoogers, V-Synth, Nord Wave, Two-Voice, Sh101,
2009-11-21 by Thomas McIvor
This is the best news i've heard in ages. looking forward to it. Tommy
2009-11-21 by anotherbbs
This is really an exciting news! Do keep us posted! Thank you. /M.Q. --- In analogue-sequencer@yahoogroups.com, "colinfraser_com" wrote: > > Hi people, > > Just thought I'd let those patient types still waiting for Cirklon to see the light of day know, the first test batch of pro
2009-11-20 by acidmitch
--- In analogue-sequencer@yahoogroups.com, "colinfraser_com" wrote: > In P3 terms, that amounts to just under 2 million bars of internal pattern storage. Are you sure that's enough ? I was hoping for a little more :)
2009-11-20 by Tom Adam
I hope the nativ CV will have 1/4 jacks.... Conserning the whatever 100+ pin IC and DIY kit's, What if you sell the boards with the IC on it, the rest could be DIY'ed? I want one ;-) so put me on whatever list there is... Still looking for beta testers? Cheers, -- ToAd Tom.Adam@t
2009-11-20 by Colin f
> Will you be offering a kit again? Probably not. I think the casual kit builder would be put off by the three chips with 0.5mm pitch leads. Soldering a 144 pin TQFP is not for the fainthearted. There is potential for add-ons to be available as kits, as they can use more DIY frie
2009-11-20 by Jesse
Will you be offering a kit again? Allowing any pre-orders? :) ----- Original Message ----- From: Colin f To: analogue-sequencer@yahoogroups.com Sent: Friday, November 20, 2009 11:43 AM Subject: RE: [analogue-sequencer] Cirklon news > I can't wait... > > Any idea about price tag?
2009-11-20 by boops.secretvibes
Hi,all,very good news...hope there will be a kit available for diy ...i hope ;-) best regards --- In analogue-sequencer@yahoogroups.com, "colinfraser_com" wrote: > > Hi people, > > Just thought I'd let those patient types still waiting for Cirklon to see the light of day know, th
2009-11-20 by Miguel Mendoza
I can't wait... Any idea about price tag? Cheers! ----- Original Message ----- From: colinfraser_com To: analogue-sequencer@yahoogroups.com Sent: Friday, November 20, 2009 5:24 PM Subject: [analogue-sequencer] Cirklon news Hi people, Just thought I'd let those patient types still
2009-11-20 by Colin f
> I can't wait... > > Any idea about price tag? I only know the cost of the boards and the components so far. Once I know the cost for an enclosure and the assembly time, I'll be able to price the pre-production units. Cheers, Colin