Yahoo Groups archive
Messages
Page 73 of 168 · 8362 messages matched
2006-04-12 by synchro1
Same here. When you send the 55, should you see anything anywhere - either on the P3 or the MIDIOx screens? I can't tell that anything happens and I have to delete the 55 from the command window before entering the pasted string. Any help appreciated. --- In analogue-sequencer@ya
2006-04-12 by Colin f
> Just to be sure, is this the bug's that's done my cpu's in in P3's > #23&45 or was that something else? No, those were the older Temic parts. When they corrupt their flash, the lose chunks of the main program. That hasn't happened very often either, maybe 5 to 10 times out of 8
2006-04-12 by Miguel Mendoza
Hi Colin, unfortunatly it didn't work for me. The unit doesn't respond to any sysex message or file. The display doesn't show anything and the leds are still on. Any idea? Thanks. Miguel. ----- Original Message ----- From: Colin f To: analogue-sequencer@yahoogroups.com Sent: Wedn
2006-04-12 by ch.³l
Just to be sure, is this the bug's that's done my cpu's in in P3's #23&45 or was that something else? grtz, Chiel
2006-04-12 by Colin f
> Here's another scenario: I set up a playlist which plays a > pattern at > tonic, and then transposes to dominant. I still want FTS on > the tonic > (perhaps I'm recording into the pattern in arpeggio mode), > but I want > the dominant shift to be chromatic. > > I think we're ge
2006-04-12 by Nick Rothwell
On 12 Apr 2006, at 15:22, Fred Beecher wrote: > But I find > that when I add aux events that do transposition or use playlist > transposition, I like to defeat that transposition at certain steps to > add continutity. Here's another scenario: I set up a playlist which plays a pat
2006-04-12 by Fred Beecher
On 4/12/06, Colin f wrote: > > Maybe I should rename it FTNS - force to not suck. ;-) Hah hah!!! User-config option? : ) > It's not technically difficult to do per step. Just needs an extra 'defeat > playlist and part transpose' flag, and probably an event to set it. > Or I suppo
2006-04-12 by Colin f
> Well, I'd use it a great deal, that's for sure. When I'm improvising, > I like to have FTS on to keep everything from sucking. : ) Maybe I should rename it FTNS - force to not suck. ;-) > But I find > that when I add aux events that do transposition or use playlist > transposit
2006-04-12 by Fred Beecher
On 4/12/06, Colin f wrote: > > > This brings up a question I've been wondering about lately... > > is there a > > way to defeat non-FTS transposition only? > > No. Is that something you would need often ? Well, I'd use it a great deal, that's for sure. When I'm improvising, I lik
2006-04-12 by Colin f
> Hello, my P3 now doesn't boot anymore, all the upper and step > mode leds remain on. Colin, maybe this is the bug you > descreibed before? My unit is pretty new. I have uploaded a file called "P3Resurrection.pdf" to the Yahoo files section. This file describes how to use MIDIOx
2006-04-12 by Miguel Mendoza
Hello, my P3 now doesn't boot anymore, all the upper and step mode leds remain on. Colin, maybe this is the bug you descreibed before? My unit is pretty new. Thanks. Miguel. [Non-text portions of this message have been removed]
2006-04-12 by synchro1
perfect timing. Last night I loaded 3.1.006 by removing the MIDI loop (d'oh!). The update went over but the BAD DATA message appeared after the update. I shut off, turned on ,and it came up showing 3.1.006 and ran fine. I played it for several hours with no problems. However, I w
2006-04-12 by Colin f
Hi Miguel, > Well, it was booting untill right now. All leds on upper and > step mode are on but the unit doesn't boot. > > Any idea? This is the same fault that should be resolved by the new bootloader version, though if it has happened after you have already applied the firmwar
2006-04-12 by henry
Colin, if a shortcut would be introduced a back/forth one would be very cool to have. cheers, henry Am 12.04.2006 um 10:51 schrieb Colin f: > I've thought about adding a shortcut way of switching to the next > pattern in > edit mode, but there's no quick way yet. > Doing it autom
2006-04-12 by Miguel Mendoza
Well, it was booting untill right now. All leds on upper and step mode are on but the unit doesn't boot. Any idea? Thanks. ----- Original Message ----- From: Colin f To: analogue-sequencer@yahoogroups.com Sent: Wednesday, April 12, 2006 11:24 AM Subject: RE: [analogue-sequencer]
2006-04-12 by Colin f
> Hello, I have found some issues updating to the new SO. First > I tried to do it with the P3 Tools 1.06 with no results, no > data is received wit the P3. Even I tried later to receive > patches to the utility and nothing. This application was > working last time I used it, I c
2006-04-12 by Miguel Mendoza
Hello, I have found some issues updating to the new SO. First I tried to do it with the P3 Tools 1.06 with no results, no data is received wit the P3. Even I tried later to receive patches to the utility and nothing. This application was working last time I used it, I checked mid
2006-04-12 by Colin f
> This brings up a question I've been wondering about lately... > is there a > way to defeat non-FTS transposition only? No. Is that something you would need often ? Best regards, Colin Fraser Sequentix Music Systems Ltd http://www.sequentix.com
2006-04-12 by Colin f
> Simple question... the PLED from crystalfontz > > http://www.crystalfontz.com/products/index-pled.html > > I would assume it would be CFAP1602A-Y-JCS rather then > CFAP1602A-Y-JCV, it appears to fit the bill. I couldn't see a ...JCV part on the site, but CFAP1602A-Y-JCS is the
2006-04-12 by Colin f
> I recently program p3 a lot to trigger drums from NI Battery and use > it along my machinedrum. > In machinedrum I realy like the option of having a A/B pattern mode > in pattern edit mode so you have a A pattern and a B pattern chained > toggling in playback and the displayed
2006-04-12 by synchro1
At 02:32 AM 4/11/2006, you wrote: > > > BAD DATA appears almost immediately in the window. The firmware > > does not updgrade. Now when I turn on the P3 I get CHK FAIL = > > 9C43. I select F3 and try again. I check MidiOx for buffer and > > milliseconds pause after F7. No dice. I
2006-04-11 by colinfraser_com
Folks, I have identified a rarely occuring bug in the Atmel flash ROM programming API in the CPU used in production P3s, and later kits (serial numbers #2001 on). The effect of the bug is to cause some CPU configuration bytes to be erased when firmware blocks are being written. T
2006-04-11 by bleep
On Tue, 11 Apr 2006, Colin f wrote: > Could it be you have a MIDI loop ? > When P3 sends the handshake messages, if MIDI Ox sends them back to P3, it > can cause problems. > Make sure you have only MIDI out on the PC to MIDI in on the P3. What you are describing sounds exactly li
2006-04-11 by bleep
On Sun, 9 Apr 2006, Paul Nagle wrote: > You can defeat any kind of transposition - including FTS - using the > "Xd" row (Transpose Defeat - beneath Gate, Tie, Skip). Set any step's Xd > flag active and the note on that step will be sent out "as is". This brings up a question I've
2006-04-11 by Miles Egan
On 4/11/06, Paul Nagle wrote: > The manual is pretty good if you haven't checked it out for a while, > worth the effort. Auxiliary events can do things I guarantee you won't > have thought of... :) Thanks for the info. The used p3 at Analogue Haven is now no longer for sale. ;) -
2006-04-11 by Colin f
> BAD DATA appears almost immediately in the window. The firmware > does not updgrade. Now when I turn on the P3 I get CHK FAIL = > 9C43. I select F3 and try again. I check MidiOx for buffer and > milliseconds pause after F7. No dice. I pull out ym old MidiSport > USB 4x4; no dif
2006-04-11 by Colin f
> I had almost exactly the same issue with an older P3 last week. I was > using MidiOx as well and got the BAD DATA messages when sending the > upgrade. I tried a few times to no avail. When P3 receives a firmware block, it takes a little while to decode and write it into the fla
2006-04-11 by Paul Nagle
On Tue, 11 Apr 2006 02:32:19 -0000, "milesegan" wrote: >1. Play sequences of odd length? Alongside even-bar sequences? Sure >2. Play sequences in backward, reverse, alternating or random order? Sure >Can different sequences play in different orders simultaneously? Sure - one per
2006-04-11 by henry
Hi Colin, I recently program p3 a lot to trigger drums from NI Battery and use it along my machinedrum. In machinedrum I realy like the option of having a A/B pattern mode in pattern edit mode so you have a A pattern and a B pattern chained toggling in playback and the displayed
2006-04-11 by beakanddune
Hi, I had almost exactly the same issue with an older P3 last week. I was using MidiOx as well and got the BAD DATA messages when sending the upgrade. I tried a few times to no avail. What solved my problem was using P3 Tools to send the firmware to the P3. I believe that MidiOx
2006-04-11 by milesegan
I've been messing around with a lot of step sequencers recently and the P3 looks like it might be the king of this hill. The manual is a little dense though so I'm hoping I can inflict my laziness on you and ask a couple of questions. Can the p3: 1. Play sequences of odd length?
2006-04-10 by synchro1
I adopted the early P3 formerly played by John Duval. Shortly after it arrived, I upgraded the bootloader and then up to firmware 3.1.005 with no problems. Time goes by; the instrument is great. I decided ti was time to upgrade to 3.1.006 tonight. I used the sys file from sequent
2006-04-10 by keith sterling
> I've powered up only the mainboard but the lcd doesn't write at all > I had a blank lcd on first power up of my P3 too... turned out that the contrast was all the way down. Have you checked the trimmer?
2006-04-10 by MattiaC
Thank you so much colin =) I will try soon Mattia Cuttini 2006/4/10, Colin f : > > > > I've powered up only the mainboard > > but > > the lcd doesn't write at all > > Can you see attempted writes to the LCD ? > The CPU should be strobing pin 6 of the LCD connector. > In one case
2006-04-09 by Nick Rothwell
On 9 Apr 2006, at 11:45, Colin f wrote: > There is a 'paste filter' that selects which parts of the copied > data will > be pasted - notes, auxes, both (notes and auxes), aux config or all > of it. Oop - OK - pilot error... -- N. nick rothwell -- composition, systems, performance
2006-04-09 by Colin f
> I've powered up only the mainboard > but > the lcd doesn't write at all Can you see attempted writes to the LCD ? The CPU should be strobing pin 6 of the LCD connector. In one case I have seen, the transistor used for Q1 had too little gain to drive the LCD enable line. You cou
2006-04-09 by MattiaC
Hi... I'm quite sad 'bout my P3... I've powered up only the mainboard but the lcd doesn't write at all so I've got to go a step beyond and try to find out where's the problem and so what is the current consumption of the main board? I've checked million of times the layout and co
2006-04-09 by Colin f
> when in aux edit mode. . > and selcting gate,or tie. etc In aux edit mode, the STEP MODE button selects the AUX you are editing - A, B, C or D. You need to switch UPPER MODE back to VELO, LENG or DELAY to use the step keys for GATE, TIE, SKIP or Xd. > is there a user config? wh
2006-04-09 by sad1robot@aol.com
i flashed my p3 with the latest build, when in aux edit mode. . and selcting gate,or tie. etc its defaulted to CC # ?? when selecting TIE .. it shows CC# 2 all i want to do is tie notes together so my TEEBEE can slide notes. from memory the last build i had .. to this all i had t
2006-04-09 by Colin f
> > Since the last release candidate, a bug in the copying of aux > > config has > > been fixed > > I think I came across that as well a day or two ago: certainly, I've > copied steps 1-8 of a pattern into 9-16, changed the length to 16, > and had the second half be different. (O
2006-04-09 by Nick Rothwell
On 8 Apr 2006, at 09:49, Colin f wrote: > Since the last release candidate, a bug in the copying of aux > config has > been fixed I think I came across that as well a day or two ago: certainly, I've copied steps 1-8 of a pattern into 9-16, changed the length to 16, and had the se
2006-04-09 by Paul Nagle
beakanddune wrote: > Hi, > > Could anyone tell me how to defeat FTS on an individual pattern > step ? I've had a look in the manual and although I can find > reference to being able to do this, I don't seem to be able to find > out how its done. > You can defeat any kind of trans
2006-04-09 by beakanddune
Hi, Could anyone tell me how to defeat FTS on an individual pattern step ? I've had a look in the manual and although I can find reference to being able to do this, I don't seem to be able to find out how its done. Many thanks Simon
2006-04-08 by clements1990
Indeed sire that is what I've been doing... comparing the pdf for 1.6 and that 1.52 xls, I've not found any extra bits yet but I've only just begun :o) (break into the carpenters tune if you feel you must) Simple question... the PLED from crystalfontz http://www.crystalfontz.com/
2006-04-08 by Colin f
Folks, Release version 3.1.006 of the P3 firmware is in Yahoo files now, and also on the Sequentix site downloads page. http://www.sequentix.com/sq_download.htm The updated manual is available only on the Sequentix site, since it's too big for Yahoo files. A list of new and updat
2006-04-08 by colinfraser_com
> Does anyone have a Mouser parts list for version 1.6 they wanna share :) You'll find the vast majority of parts are the same as for v1.52 The only differences are on the main board, so if you print out the standard BoMs for both, you should be able to see what else you need. Be
2006-04-08 by clements1990
My P3 Kit from AnalogueHaven arrived today... damn UPS hit me hard for shipping... I guess they really do SUCK :) Does anyone have a Mouser parts list for version 1.6 they wanna share :) cheers Steve
2006-04-07 by Colin f
> This week I purchased an older P3 (one of the non-factory versions). > This P3 does not have the latest OS installed. I for some reason > thought I would need to install the bootloader update found in > the 'files' section which I have done. I am now receiving a > message 'Not
2006-04-07 by beakanddune
Hi, I'm hoping somebody might be able to help me (I'm new). This week I purchased an older P3 (one of the non-factory versions). This P3 does not have the latest OS installed. I for some reason thought I would need to install the bootloader update found in the 'files' section whi
2006-04-06 by Nick Rothwell
On 6 Apr 2006, at 17:08, darkstr1746@comcast.net wrote: > tune it down an octave and run it through a triple res filter and > i'll bet you have a dynomite Tabla imitation! Nope, doesn't work that way - it's a physical modelling patch, so tuning is an approximate concept at best.