Yahoo Groups archive
Messages
Page 19 of 29 · 1446 messages matched
2004-07-24 by Steven O'Connor
years of furniture skills make it possible! summary from the feedback so far (thanks to everyone): 1. headphone socket 2. multiples, multiples, multiples... 3. walnut finish 4. 1/4" rear ins/outs Everyone has a unique take on the ideal cabinet - so maybe some space to customize??
2004-07-24 by vogelscheiss
I'm kind of surprised you can vacuum-form a sheet thick enough to be used in a cabinet. How thick will the plastic be? > -----Original Message----- > From: Steven O'Connor [mailto:stevenoconnor@freeuk.com] > Sent: Friday, July 23, 2004 6:49 PM > To: analogue_systems@yahoogroups.c
2004-07-23 by Steven O'Connor
Hi All I'm just developing a great new cabinet design for doepfer/as modules. I'm hoping to go into small scale production and so would appreciate any development help at this stage! I'll post photos next week. For now it's a vacuum formed, high gloss white/walnut laminate finish
2004-07-22 by Peter Grenader
Wow. 20dB is a lot and that's doesn't sound normal. Let me ask you a silly but obvious question - what's your input level like? if it's way up there, you could be making matters worse and this could account for both the hiss and crackling problem. The crackling could also just be
2004-07-22 by allawishes_mclusky_iii
hi everyone! i wish i was joining this group just for the fun of it but, alas, my rs100 is misbehaving and i need your help :/ first up, the output has become quite noisy i.e. about 20dB noisier than all my other modules. i also noticed that when the cutoff is high, turning the r
2004-07-22 by hefnerwww
Yep definitely, use my email address if you can though, I keep forgetting to check here. If I get your address today i can send your a cheque otherwise its monday, cheers mate.- D --- In analogue_systems@yahoogroups.com, Alex wrote: > ok mate, sorry i hevent replied sooner. > Wou
2004-07-21 by Alex
ok mate, sorry i hevent replied sooner. Would you like me to post it with insurance? Alex > From: "hefnerwww" > Reply-To: analogue_systems@yahoogroups.com > Date: Tue, 20 Jul 2004 07:41:08 -0000 > To: analogue_systems@yahoogroups.com > Subject: [analogue_systems] Re: beginner's s
2004-07-20 by hefnerwww
Hey alex, your EZ email address is giving me jip. still want to buy this unit off you, just need your address/ - d --- In analogue_systems@yahoogroups.com, Alex wrote: > Not a prob if you want me to post it. I've sent loads of studio gear world > wide. I know how to package! > Sa
2004-07-19 by hefnerwww
I just wanted to post about my visit to bob at analogue systems last week. I don't know if anyone has done this but I just wanted to say how friendly and enthusiastic Bob was. I must have spent an hour there and he never made me feel I was intruding and answered my questions and
2004-07-13 by Julian
Bolt down type? Im a doepfer / analogue solutions user, who lurks here for non-system specific tips, but im pretty sure that a/systems uses the same sockets. In which case theyre manufactured by cliff components. If your in england, then the best place to buy them is probably rap
2004-07-13 by steven
Hi All Does anyone know where to get identical AS 3.5mm sockets from? I'm UK based. Maplin have some similar ones but don't seem to stock the 'bolt down' type. Thanks Anatole
2004-07-13 by ilanode
Hi list, forget about my last posting. I digged once more and deeper in the mentioned posting by Peter and eventually connected my new gem to the bus board and it works! Sorry, if I wasted anyone's time, Ilanode --- In analogue_systems@yahoogroups.com, "ilanode" wrote: > Hi list,
2004-07-13 by ilanode
Hi list, I'v posted earlier on my RS290 which will be housed in a Doepfer rack. I received my RS290 by now and soldered a connector for the RS290 to my Doepfer bus board. Peter posted on the ASys power supply that it is grouped in pairs of 4 for the different voltages and ground.
2004-07-09 by Alex
Not a prob if you want me to post it. I've sent loads of studio gear world wide. I know how to package! Saying that, I'll be in central London next week, Camden, Carnaby Street, and West End in the Evening. Must let you know, someone else is interested at £225. But not sent payme
2004-07-09 by hefnerwww
Wow! just seen where Beccles is! Thats a long way (I'm in London) still might do it if I can pursuade the missus to come out for the day, means you'd get cash as well! - D --- In analogue_systems@yahoogroups.com, Alex wrote: > Darren, > > I'm in Beccles, Suffolk, England. I'll po
2004-07-07 by Alex
Darren, I'm in Beccles, Suffolk, England. I'll post worldwide. As for a price - not sure - the item is "as new" used in a studio and smoke free enviriment. Perhaps you would liketo make me an offer? Alex > From: "hefnerwww" > Reply-To: analogue_systems@yahoogroups.com > Date: Tue
2004-07-06 by hefnerwww
I was just logging on to ask what people thought of the RS130 Scale Generator, and I find one for sale. I'm still interested in what people think of the unit. But alex how much did you want for the RS130, and where are you based? - Darren --- In analogue_systems@yahoogroups.com,
2004-07-05 by Alex
yes Alex, I have an RS 130 Scale Generator for sale. Alex > From: "giftquestionmark" > Reply-To: analogue_systems@yahoogroups.com > Date: Mon, 05 Jul 2004 07:05:53 -0000 > To: analogue_systems@yahoogroups.com > Subject: [analogue_systems] beginner's system > > Hello, > > I decide
2004-07-05 by giftquestionmark
Hello, I decided to start putting together my first modular system and would like to know if there is anybody who has systems/modules for sale. Thanks in advance for your time, Alex
2004-07-01 by selfoscillate
grrrrrrrr........ i think we need a ban here. --- In analogue_systems@yahoogroups.com, "hjuxgjd81" wrote: > I had really high interest rates on my home loan. > I saved thousands of dollars on home payments. > And you can too. Interest rates are as low as can be, > And Yes Even yo
2004-06-30 by hjuxgjd81
I had really high interest rates on my home loan. I saved thousands of dollars on home payments. And you can too. Interest rates are as low as can be, And Yes Even you can take advantage of this. This is how. Stop in and fill out this thirty-second form, to Begin the money saving
2004-06-28 by uelogy
hey guys, im planning to get some AS gear soon, a French connection 2 VCO's and a VCA as well as the RS10 case... my question is, would the standard australian 240v wall sockets be able to power the AS gear, of would i need some sort of converter? or is it even eaiser then that,
2004-06-26 by Peter Grenader
No worries. Been there, glad to help. enjoy! - Peter Robert Hoffman wrote: > It was the fuses. I replaced them all today and everything is back to > normal. Thank you so much for your help, saved me a trip to the tech. > > Rob > > > > On Thursday, June 24, 2004, at 05:50 PM, Pete
2004-06-26 by Robert Hoffman
It was the fuses. I replaced them all today and everything is back to normal. Thank you so much for your help, saved me a trip to the tech. Rob On Thursday, June 24, 2004, at 05:50 PM, Peter Grenader wrote: > Sounds like it! > > Is your rack the new model Bob just released?� If s
2004-06-25 by spacekraft2000
hi,does any one know how to achive any pitch shifting and poly- rhythmic effects from the shaper part of this module as it is in the manual? i realise its main purpose is extending triggers etc but don't see how to use audio through this ,as control or what ? thanks for any ideas
2004-06-25 by Peter Grenader
Sounds like it! Is your rack the new model Bob just released? If so, there are separate fuses on the DC (secondary) side of the transformer on the PSU itself and the top and bottom rows of connectors on the PSU are fused separately. Contact me offline and I'll give you some tips
2004-06-24 by Rob Hoffman
I think I might have blown up some modules. I plugged in my new RS240 Bode filter, and none of the lights came on. I pulled it out and reseated the cable and the LED's lit up and it passes signal fine. The problem is my two RS95 oscillators, and the VCA no longer generate or pass
2004-06-22 by mralexbanks
Hi, I'm looking to sell an RS 130 scale generator. I'm also looking to get an RS 165, RS 170, RS 60 and an RS95 and a case to put them in! Anyone interested? I'm in England. Alex
2004-06-21 by levka0
Hi I have two RS 310's with analogue bbd for sale (VGC, with orig. cables) doepfer A-100 adaptor cables also FS or trade against RS 500e or 390 negotiable kind regards Joost I am based in the Netherlands
2004-06-21 by Alex
Thanks Shawn, I'm into making bassline and odd sound for dance music. I'll check out the sites you sent. It's so different from all the other analogue I've had! I've managed to add an amplitude env to a sound and mod the filter with an envelope, but having probs triggering the LF
2004-06-21 by Alex
thanks buddy > From: "mritenburg" > Reply-To: analogue_systems@yahoogroups.com > Date: Mon, 21 Jun 2004 00:43:44 -0000 > To: analogue_systems@yahoogroups.com > Subject: [analogue_systems] Re: getting started > >> Would anyone know a good place to find out just how to get started
2004-06-20 by mritenburg
> Would anyone know a good place to find out just how to get started > on this thing! I have a MIDI CV converter and that all works > fine. www.clavia.se has some great modular tutorials. Also, the Arp 2600 users manual is a great place to start. I believe there is a PDF version
2004-06-19 by Modular Fan
hello, > This is one such place! Analogue Heaven is another. www.the-gas-station.com --> modular pump is another. But, its a broad question! What exactly would you like to do??? Good luck, Shawn Cleary __________________________________ Do you Yahoo!? Read only the mail you want
2004-06-18 by mralexbanks
Hi, I've just got myself an RS8000. I have a fair idea what I'm doing but I think I'll need some help with the basics. Would anyone know a good place to find out just how to get started on this thing! I have a MIDI CV converter and that all works fine. Any help would be most apre
2004-06-18 by llnkdkcz48
I was really far into debt. Like Most I was in Financial dispair. I could not seem to get ahead no matter how hard I tried. Untill I found this place. http://pacehelp.place.cc If you are in debt they can help you out. Check them out today I did. This email was sent because you jo
2004-06-17 by Peter Grenader
It worked for me! I thought (thought) Bob was using the same regulator in his supply, the 7805 - no? ilanode wrote: > For the time being no problem on the +/- 12V side BUT you got me on > the 5V low cost adapter side. This tiny thing supplies 100mA > only ... Will this tiny thing
2004-06-17 by Peter Grenader
You'd be surprised. A. Sys modules with displays pull anywhere from about 350 to 500 mils each. It adds up quick! ilanode wrote: > Thanks for the hint. Having +2,5A and -2,5A for about 5 rows of > modules there is no chance that the RS290 will draw too much power. > Ilanode > > -
2004-06-17 by Peter Grenader
No worries! The way Dieter did that little adapter is really smart. It's the same regulator as Bob uses, btw...so you're good to go. ilanode wrote: > Thanks a lot for your swift reply, Peter! > > --- In analogue_systems@yahoogroups.com, Peter Grenader > wrote: >> Yes. >> >> ilano
2004-06-17 by ilanode
For the time being no problem on the +/- 12V side BUT you got me on the 5V low cost adapter side. This tiny thing supplies 100mA only ... Will this tiny thing do it? Now I am unconfident. --- In analogue_systems@yahoogroups.com, Peter Grenader wrote: > You'd be surprised. A. Sys
2004-06-17 by Peter Grenader
Yes. ilanode wrote: > Hi list, I'm peeping here for while and this is my first posting. > Just have bought a RS290 VC Delay/Sampler for my Doepfer rack. Since > this device needs +5 volt extra I wonder wether I can use the > Doepfer 5V low cost adapter which draws the extra 5V fr
2004-06-17 by ilanode
Thanks for the hint. Having +2,5A and -2,5A for about 5 rows of modules there is no chance that the RS290 will draw too much power. Ilanode --- In analogue_systems@yahoogroups.com, "mritenburg" wrote: > > > >>> Just have bought a RS290 VC Delay/Sampler for my Doepfer rack. > > >
2004-06-17 by mritenburg
> >>> Just have bought a RS290 VC Delay/Sampler for my Doepfer rack. > > Since Hi, You should make sure you have enough free current from your power supply before you plug the RS290 in. When I first received my RS290, I slapped it in a Doefer rack. I was very disappointed. The RS
2004-06-17 by ilanode
Thanks a lot for your swift reply, Peter! --- In analogue_systems@yahoogroups.com, Peter Grenader wrote: > Yes. > > ilanode wrote: > > > Hi list, I'm peeping here for while and this is my first posting. > > Just have bought a RS290 VC Delay/Sampler for my Doepfer rack. Since > >
2004-06-17 by ilanode
Hi list, I'm peeping here for while and this is my first posting. Just have bought a RS290 VC Delay/Sampler for my Doepfer rack. Since this device needs +5 volt extra I wonder wether I can use the Doepfer 5V low cost adapter which draws the extra 5V from the 12 V on the bus board
2004-06-15 by Terje Winther
Hi Beer, >Bob sent my new rack containing the RS370+75 >So I took a few pics for thoes interested Yes, plase send them along (or post them at a web site and tell us the URL) -- tw. :)
2004-06-15 by Rt.Hon.Beerma§ter
Hi guys, Bob sent my new rack containing the RS370+75 So I took a few pics for thoes interested Haven't had time to use it yet but will also post with thoughts soon Beer
2004-06-10 by mritenburg
Hello, I have owned my RS290/295 for over a year and I have just begun to tinker with sampler. I am trying to figure out how to dump and retrieve samples using the RS295. Is this documented anywhere? Thank you, Matthew
2004-06-08 by unknown freak
Awesome! > -----Original Message----- > From: (i think you can figure that out) > [mailto:peter@buzzclick-music.com] > Sent: Tuesday, June 08, 2004 9:59 AM > To: analogue_systems@yahoogroups.com > Subject: [analogue_systems] RS370/375 first impressions... > > > Yesterday at Big C
2004-06-08 by (i think you can figure that out)
Yesterday at Big City Music I had an opp to spend about 10 minutes with the Analogue Systems RS370 Six voice polyphonic DSP based digital VCO (and ADSR...and Midi to CV...and Argeggiator) along with the 375 Expander, and I've got to say - I'm impressed. For those who have lusted
2004-06-07 by selfoscillate
i want you to be no member anymore, spam-sucker. --- In analogue_systems@yahoogroups.com, "pvxunul104" wrote: > hey hey, just thought id tell you guys about this free debt consolidation site that reduced my monthly payments by damn near half, no more worries about bills! > > http