Re: Emuser Parts List
2012-07-05 by esynthesist
The labelling/coding system of these ICs can evolve in time, that s why I only mentioned the basic root identifier of the RS422 ICs. But since the EmuSer
Messages
Browse messages
Page 65 of 236 · 11758 messages matched
RE: [emax] replace the display
2012-07-04 by philippe.69
http://www.backlight4you.com/product_info.php/info/p906_Leuchtfolie--blau-gr uen--18mm-x-74mm--laminiert.html * Backlight Ersatz Leuchtfolie für EMU EMAX I +
RE: [emax] replace the display
2012-07-04 by philippe.69
the backlight is changed without replacing all display De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Niklas N Envoyé : mercredi 4
EMXP Emax zip drive Windows 7 64 bit
2012-07-04 by blchrr@...
Hi there chaps, Can someone tell me if EMXP works with IDE zip drives on a Windows 7 64 bit computer? My Emax has an internal SCSI zip drive and basically i
replace the display
2012-07-04 by Niklas N
I going to replace the display on my Emax Plus, when it has begun to fade away after 20 years. Does anyone have tips and ideas on what to consider before I
RE: [emax] Emuser Parts List
2012-07-04 by philippe.69
!!!! you can not send more than 512kb as a floppy disk emuser is designed for the emulator II it works like a disk drive no interest on an Emax De :
Emuser Parts List
2012-07-04 by freddy1771994
Hi, I m currently searching the parts for the emuser which is not that easy and cheap if you live in Germany. I have the following - hopefully not stupid -
Re: [emax] Emax 1 storage options
2012-07-02 by Ted Summers
Unfortunately, Serial # and model # do not allow one to determine if SCSI can be added to the unit. Only looking at the PCB will help with that. Ask the seller
Re: [emax] Re: Triggering Emax 1 rack with SP1200
2012-07-02 by jammie
with awave you can load all the samples you want that will fit into the emaxes memory then you make sf2 keymaps for each preset you want so that the sp12 can
Re: Triggering Emax 1 rack with SP1200
2012-07-02 by sp1200emu
keygroups would be Akai terminology.. You mean to do this in the Preset Definition module? Oh I see what I am doing now. I am just building a map of
Re: [emax] Triggering Emax 1 rack with SP1200
2012-07-02 by jammie
you need to make a keymap up of the sounds you want to the pad trigger notes the easiest way i do it is with awave studio you can save that to sound font and
Emax 1 storage options
2012-07-02 by John
There is an emax on ebay I m interested in. It looks like a series 1 with serial 133. Question: Are there any higher density data storage options other than
Triggering Emax 1 rack with SP1200
2012-07-02 by sp1200emu
Anyone have any tips or a tutorial on how you would setup the Emax up to have several samples being triggered from the 1200, like people do with the 1200&S950
Re: Anyone experienced with the HxC floppy emulator?
2012-06-21 by studiotools_se
Hi Kalle, you need to place the emaxos.emx in the same folder then the *.em1 file. Then HxC recognizes it and you can export a correct HFE file. Cheers,
Sound Designer for Emax ( 1.12 )
2012-06-20 by sllaci01
Hello Is for me one Emax I SE Plus. I could after many searches to have bought old Macintosh SE. I would like to use it the two together Sound. I did not find
Re: [emax] Re: Anyone experienced with the HxC floppy emulator?
2012-06-17 by jammie
no its a floppy emulator so works from the floppy drive chip on the emax mother board has nothing todo with scsi if you have scsi capability you dont need the
Re: [emax] Re: Anyone experienced with the HxC floppy emulator?
2012-06-17 by Kalle Windefalk
Ok, thanks! Is it true that you need the requirements for a scsi-update to be able to use the rev f? Regards Kalle ... [Non-text portions of this message have
Re: [emax] Re: Anyone experienced with the HxC floppy emulator?
2012-06-17 by jammie
i never bothered with the other revs as they were diy looking and it was always a bodge to fit them that why i was in forum talks in getting the ref f produced
Re: [emax] Re: Anyone experienced with the HxC floppy emulator?
2012-06-17 by Carl Lofgren
Thanks! And yes - it s Calle as well :) /C ... [Non-text portions of this message have been removed]
Re: Anyone experienced with the HxC floppy emulator?
2012-06-17 by windefalk
Hi Jammie! I have the cased rev C. I ve uploaded a picture in the files section. Under the folder named Kalle. Regards Kalle
Re: Anyone experienced with the HxC floppy emulator?
2012-06-17 by windefalk
Hi Carl! or Calle perhaps? =) I ve uploaded a pic now in the files section under the folder Kalle
Re: [emax] Re: Anyone experienced with the HxC floppy emulator?
2012-06-14 by Carl Lofgren
Hey Kalle - you don t happen to have a picture to show how it looks like? /C ... [Non-text portions of this message have been removed]
Re: [emax] Re: Anyone experienced with the HxC floppy emulator?
2012-06-14 by jammie
drill holes in the brackets so that the hxc sits in the middle of the holethen the lcd will be visible have you the ref f version which is 3.5 format or the
Re: [emax] Re: Anyone experienced with the HxC floppy emulator?
2012-06-14 by Kalle Windefalk
It is the hxc floppy converter. The flat cable is long enough actually but sith the power cord stretched the front of the hxc is aligned to the front of the
Re: [emax] Re: Anyone experienced with the HxC floppy emulator?
2012-06-14 by jammie
but the cables should be long enough i have never had any problems with them fitting the slim floppy convertors ... From: jammie To: emax@yahoogroups.com Sent:
Re: [emax] Re: Anyone experienced with the HxC floppy emulator?
2012-06-14 by jammie
what are you talking about is it the slim floppy convertor or the hxc floppy emulator the floppy power conector is short but you can get extender cables the
Re: Anyone experienced with the HxC floppy emulator?
2012-06-14 by windefalk
The flat cable and the power cable for the floppy is very short. If I wanna buy a longer cable, what should I use? Flat cable is not a problem to find (is
FS: Emax I Keyboard in Pittsburgh, USA
2012-06-14 by Preslav Lefterov
If anyone is interested it is fully functional. Can provide references on analog heaven and ebay. Price is $400 for pickup / $475 if you need me to ship it.
Re: replacing power supply with one purchased from epr
2012-06-14 by llingo_apt
thanks- yeah i dunno...my blue and brown power cables seem to be solid as does my ground and pins...its not working at all....just squealing and lighting a few
Re: [emax] Re: replacing power supply with one purchased from epr
2012-06-14 by Ted Summers
You probably have one of the two AC not connecting well- that can cause that behavior.... On Jun 13, 2012, at 4:43 PM, llingo_apt wrote: I actually have a emax
Re: replacing power supply with one purchased from epr
2012-06-13 by llingo_apt
I actually have a emax 1 ...so those are not needed at all for the new ps on the emax 1 either? i tried pluggin it in and its not working properly..some rapid
Re: [emax] replacing power supply with one purchased from epr
2012-06-13 by jammie
just put the 2 spades together and tape they are not needed as the emax2 psu version was switchmode and auto sensing circuits for 110vac and 220-240vac where
replacing power supply with one purchased from epr
2012-06-13 by llingo_apt
I cannot find a spot to hook up the voltage selector wires on this new power supply i just purchased from eps...everything is hooked up otherwise in their
Re: black boxes No boot
2012-06-13 by cheju_99
Ok, great advice I appreciate! i´ll do it.
Re: black boxes No boot
2012-06-13 by drsyncenstein
My emax does the same thing from time to time, mostly after it s been moved. In my case the cable from the psu to the mainboard (close to the custom chip) is
Re: Anyone experienced with the HxC floppy emulator?
2012-06-12 by windefalk
Thanks! I noticed that as well when I connected the hardware to my old PC I pray to god it will work tonight after I have format the SD card with my business
Fwd:
2012-06-12 by M Shipp
wow this is amazing you should look into it /biz/?read=4304210
Re: [emax] Re: Anyone experienced with the HxC floppy emulator?
2012-06-11 by Nigel Cruickshank
Hi Kalle, I found that the Mac OS puts invisible files onto the SD card that caused problems for the HXC. If you have formatted a card on the Mac then make
Re: [emax] Re: Anyone experienced with the HxC floppy emulator?
2012-06-11 by Kalle Windefalk
Thanx! Hope it will work with my work laptop.(IBM Lenovo) I have tested it on my MacBook with vm ware/xp with no success. I can format the SD card to a FAT32
Re: Anyone experienced with the HxC floppy emulator?
2012-06-11 by esynthesist
One OS file is sufficient. Just put all your sound files (.em1) and the os file (emaxos.emx) in the same folder on your PC, and the HxC conversion software
Re: [emax] Anyone experienced with the HxC floppy emulator?
2012-06-11 by Kalle Windefalk
Thanx Jammie, I will but o wanted to be sure it wasn t an emax-file thingy. One thing... Do I have to put OS-file and the sound disks in separate folders or
Re: [emax] Anyone experienced with the HxC floppy emulator?
2012-06-11 by jammie
plus if your having problems contact the hxc forum as you will be better served there for hxc problems ... From: windefalk To: emax@yahoogroups.com Sent:
Re: [emax] Anyone experienced with the HxC floppy emulator?
2012-06-11 by jammie
the hxc software takes a em1 file and turns it into a file for the hxc image file which is then put onto the sd card as a floppy image the software does it and
Anyone experienced with the HxC floppy emulator?
2012-06-11 by windefalk
Hi! I got the SD HcX floppy emulator today. I cant get the HcX software to read em1 or emx files. I have formated the SD card to FAT32. When I try to load a
Re: black boxes No boot
2012-06-10 by cheju_99
Ok great advice i ll ask Ted Thanks for your time
Re: [emax] Re: black boxes No boot
2012-06-10 by jammie
basically send it to ted who can test against another mainboard to see where the problem is as you could be nocking your head against the wall not know what is
Re: black boxes No boot
2012-06-10 by cheju_99
Its a keyboard i upload some photos to the forum
Re: [emax] Re: black boxes No boot
2012-06-10 by jammie
no the lcd control is seperste from the scanner cpu the scanner cpu deals with the keyboard matrix of notes and velocity and also scans the front control
Re: black boxes No boot
2012-06-10 by cheju_99
I am thinking this must be related to a failure in the front panel panel, what do you think?
Re: black boxes No boot
2012-06-10 by cheju_99
Ok i already did that yesterday, disconect the floppy, power and data cable , still the same situation, unfortunately my brother is not in my area.