Re: [emax] Emax Beginner - No Boot
2012-08-12 by jammie
what os are you using is your an se model if not it could be that the os your loading is the wrong type ... From: J To: emax@yahoogroups.com Sent: Sunday,
Messages
Browse messages
Page 63 of 236 · 11758 messages matched
Emax Beginner - No Boot
2012-08-11 by J
Hello EMAX users! Trying to boot Emax keyboard. I have Emax 1 Model 1000 with PC333 board. Booting with floppy disk. Power on, says E-mu systems - please
Re: [emax] Emax SCSI install repair
2012-08-10 by jammie
send it to ted but did you put the pal chip in and the new rom chip in the right way ... From: nuwavboy To: emax@yahoogroups.com Sent: Friday, August 10, 2012
Emax SCSI install repair
2012-08-10 by nuwavboy
Well, I had to go and push my luck...yesterday I installed a slim floppy and new backlight on my Emax 1 and everything was working great. I had a scsi kit I
Re: Display dead but LE Foil works
2012-08-09 by windefalk
I have done some testing with a multimeter. All 14+2 pins from display board to button board ok. All traces from display pin holes to flat cable ok. Every lead
Re: [emax] PSU dead!
2012-08-08 by jammie
switch mode has no extra spade connectors on the opposite side of the transformer ... From: Kalle Windefalk To: emax@yahoogroups.com Sent: Wednesday, August
Re: [emax] PSU dead!
2012-08-08 by Kalle Windefalk
Hi Jammie. How do I know if it s a switchmode type or not? Med vänlig hälsning, Kalle Windefalk ... [Non-text portions of this message have been removed]
Re: [emax] Re: PSU dead!
2012-08-08 by Kalle Windefalk
Hi Ted. I replaced the working display with the non-working. Strange patterns appeared when I switched on the keyboard. So I took the working display and
Re: [emax] Re: PSU dead!
2012-08-08 by Kalle Windefalk
Thanks Ted! 2012/8/8 Ted Summers ... [Non-text portions of this message have been removed]
Re: [emax] Re: PSU dead!
2012-08-08 by Ted Summers
The display should be movable from the one unit to the other- just the display itself.... Those brown connector things are push through for the Display pins...
Re: PSU dead!
2012-08-07 by windefalk
Hi Ted! Thanks. I swapped the boards to the keyboard but unfortunately the display is dead on that one :/ Maybe it s easier to replace a psu than a display?
Display dead but LE Foil works
2012-08-07 by windefalk
Hi...again! =) The display on my emax was dead so I bought a EL Foil and solder it on. Now it´s backlit but still no characters. I have connected another
Re: Emax 1 and Emuser problems
2012-08-06 by esynthesist
I don t think SCSI problems affect RS422 or vice versa. The first thing you should check in EMXP is whether the RS422 Host Time Out Fast Speed preference
Emax 1 and Emuser problems
2012-08-05 by sp1200emu
My Emuser worked perfectly with my EII with EMXP. And now it s saying Sysex error and a bunch of zeros with my Emax 1 SE HD. I pulled the back and the serial
Re: Emax II formated Zip Disks
2012-08-05 by tl200024
The error message I get when i try to do the full format on my computer is that my computer doesn t recognize the disk. I bought 3 supposedly blank zip disks
(no subject)
2012-07-30 by Chase Smith
http://www.dragonreptiles.com/blog/wp-content/plugins/zbhbgmiqhru/template.php?Ben225.html [Non-text portions of this message have been removed]
Re: [emax] Re: Emax HD vs Emax II - which to repair
2012-07-28 by j k
Took out the PSU from the Emax II and popped it into the Emax I. PSU success. Powered up the Emax I but with diagnostics on LCD and the Preset Definition
Re: Emax HD vs Emax II - which to repair
2012-07-28 by jaumemod
Cheapest: repair Emax II PSU, repair Floppy faulty put your Emax II MASTER on Emax I slave MIDI
RE: [emax] Emax II formated Zip Disks
2012-07-28 by philippe.69
http://www.ebay.com/sch/i.html?_sacat=0&_nkw=iomega+zip+100&_pgn=3&_skc=100& rt=nc http://www.ebay.com/itm/Iomega-Zip-100-SCSI-External-Disk-Drive-Model-Z100P2
RE: [emax] Emax II formated Zip Disks
2012-07-28 by philippe.69
Hello best and the zip format Emax This is the zip 100 or more Some internal drive on ebay and external drive the zip also will require a scsi card for the
Re: [emax] Emax II formated Zip Disks
2012-07-27 by Francis Cote
Hi, What s your computer and was it complaining about? ... [Non-text portions of this message have been removed]
Emax II formated Zip Disks
2012-07-27 by tl200024
Hello Emax users. I think I figured out my zip disk problem. I believe you to use blank zip disks, and then format them on your computer to be able to have
Re: No black boxes boot
2012-07-26 by cheju_99
I can t remove the cable, the ribbon terminal on the panel board is very hard, how do you do that... ?
Re: [emax] PSU voltage switch
2012-07-25 by Ted Summers
if it isn t there, it is autoswitch. ... [Non-text portions of this message have been removed]
Re: PSU voltage switch
2012-07-25 by freddy1771994
Second question I forgot to add in the previous post: I got this syquest 44mb with the emax and it s actually a similar question to the previous one. Because
Re: No black boxes boot
2012-07-25 by cheju_99
yeah i pulled....i´ll check continuity thanks again
PSU voltage switch
2012-07-25 by freddy1771994
Hi, I bought an second emax from the us, but on the backside there is no voltage switch like on my other one. So, how can I can change the voltage? I ve heard
Re: [emax] Re: No black boxes boot
2012-07-25 by jammie
check the cable make sure you have continuity when removing the cable did you pull on it as your supposed to use a hook tool ... From: cheju_99 To:
Re: [emax] Emax HD vs Emax II - which to repair
2012-07-25 by jammie
yes ... From: djo3yk To: emax@yahoogroups.com Sent: Wednesday, July 25, 2012 2:30 AM Subject: [emax] Emax HD vs Emax II - which to repair I have an Emax HD
Re: [emax] Emax HD vs Emax II - which to repair
2012-07-25 by Jason samonik
to me the emax sound so so so much better than the emax II ... From: Ted Summers To: Subject: [emax] Emax HD vs
Re: [emax] Emax HD vs Emax II - which to repair
2012-07-25 by Ted Summers
Why not fix them both? PSU can be had from EPR electronics (they were in stock yesterday when I looked at their website). keys are available- either ebay or I
Re: No black boxes boot
2012-07-25 by cheju_99
Yeah... you really hit the ball!!! Thanks for the advice. I connected to a m-audio controller keyb via midi channel 1, and it sounds with no problem!! But I
Emax HD vs Emax II - which to repair
2012-07-25 by djo3yk
I have an Emax HD with a faulty PSU and 7 broken keys. I also have an Emax II with a faulty disk drive. Was wondering if it would possible to swap the PSU
Re: [emax] PSU dead!
2012-07-23 by jammie
i have 3 spares 2 emax 1 type and 1 switchmode type as used on the later emax1,s and emax2 epr have sold out of the psu last time i checked ... From: Ted
Re: [emax] PSU dead!
2012-07-23 by jammie
yes you can ... From: windefalk To: emax@yahoogroups.com Sent: Monday, July 23, 2012 4:21 PM Subject: [emax] PSU dead! Hi My PSU is dead, I think. Suddenly it
Re: [emax] PSU dead!
2012-07-23 by Ted Summers
Yes. You can also replace it with one from epr electronics or Jammie may have one, or it can also be replaced with some PC power supply, if you know how. ...
PSU dead!
2012-07-23 by windefalk
Hi My PSU is dead, I think. Suddenly it would not start! Does anyone know if I could replace the psu on an emax 1 rack with one from an emax 1 keyboard?
Re: [emax] Re: No black boxes boot
2012-07-23 by jammie
even if you remove keyboard its still connected via midi mode ... From: cheju_99 To: emax@yahoogroups.com Sent: Monday, July 23, 2012 2:32 AM Subject: [emax]
Re: No black boxes boot
2012-07-23 by cheju_99
Yes but even i disconnect the keyboard conector and got the same. When i turn on the emax all the led turn on for a few miliseconds.
Re: No black boxes boot
2012-07-22 by cheju_99
i did..... it have the same symptoms.....
Re: [emax] Re: No black boxes boot
2012-07-22 by Ted Summers
try you old scanner CPU maybe and see what happens? On Jul 22, 2012, at 3:42 PM, cheju_99 wrote: Finally after reseating some ic´s the unit began to boot from
Re: [emax] Re: No black boxes boot
2012-07-22 by jammie
front panel is done by the scanner chip and cpu so are the keys sustaning notes is usually a bad diode on the keyboard some where ... From: cheju_99 To:
Re: No black boxes boot
2012-07-22 by cheju_99
Finally after reseating some ic´s the unit began to boot from the diskette, now the problem is : it load the preset tone but i have no access to the front
Iomega Zip Drive 100 - Hardware Error
2012-07-21 by tl200024
Hello. I am trying to hook up a blue Iomega Zip Drive 100 to the back of my emax 2. I had it hooked up years ago, and it worked fine. I ordered 3 new zip
Re: [emax] values
2012-07-20 by Ted Summers
If you aren t getting a good ground, or have bad location for ground of multimeter you could be getting an incorrect reading. On Jul 19, 2012, at 8:06 PM,
values
2012-07-20 by cheju_99
When i put the voltimeter across the ic s on the emax board they read 3.2 volts on the pins, on the schematics they declare 5 volts on the pins is this normal
Baldwin i/k/e for sale
2012-07-20 by surfwith
I m parting with my beloved i/k/e, currently in storage. I believe it s functional except for the floppy drive. Perfect for emax 1 parts. $100 plus shipping.
(no subject)
2012-07-18 by David Thompson
http://amazing.spacerage.co.uk/wp-content/plugins/zmkverhcndr/shop.php?theyre209.jpg [Non-text portions of this message have been removed]
Re: Five top keys fault
2012-07-17 by jaumemod
You must read all post, but i recommend you check all solder points in key range board. Test all contacts wires with tester (polimeter) and diodes of keys
Re: [emax] Re: Five top keys fault
2012-07-17 by jammie
check for dry joints on the key contact board and the first diode for that octave ... From: cheju_99 To: emax@yahoogroups.com Sent: Tuesday, July 17, 2012