Re: [emax] Re: RS422 and Alchemy
2011-09-01 by Johnny Tomasello
An easy way to start testing might be to try the MIDI dump, and is probably easier than building a cable. If the cable you build is not done correctly the
Messages
Browse messages
Page 83 of 236 · 11758 messages matched
Re: [emax] Re: RS422 and Alchemy
2011-09-01 by LIFELIKE
i have a powerbook G3 wallstreet, it doesnt send stuff thru RS422, does the same than you... i guess you ll have to buy an older powerbook, as said by
RE: [emax] Re: Can't install Omnniflop Driver on Windows 7 ?
2011-09-01 by el macaco
Yeah, I went in and yes, the cable was in backwards. After I turned the cable around, my floppy worked well for normal windows floppy duties, but Omniflop
Re: [emax] Re: RS422 and Alchemy
2011-09-01 by LIFELIKE
esythesist is THE emulator man here Françis. Recheck the setup in Alchemy, it doesnt always work the first time. I know that Emax I and II can use the same
Re: [emax] Re: RS422 and Alchemy
2011-09-01 by Francis Cote
Ok... Number 1 would be consistent other reponses I got. What bothers me is the fact that I have seen this complete kit that includes a Wallstreet G3
Re: RS422 and Alchemy
2011-09-01 by esynthesist
The problems you have is not really the same as the problem I m mentioning on my website - with some Emax-II the samples sent to the Emax-II through RS422 are
Re: Can't install Omnniflop Driver on Windows 7 ?
2011-09-01 by thenewyorkcowboy
What was the result of getting the regular MS driver to work with normal floppy disks and being able to successfully format them through windows? Is there a
Re: [emax] RS422 and Alchemy
2011-09-01 by Francis Cote
Midi is turned on? There is a switch for that? ... [Non-text portions of this message have been removed]
Re: [emax] RS422 and Alchemy
2011-09-01 by Francis Cote
I can t fiind anything else but OS 2.14 for the Emax 2. I did notice on emxp.net that there own RS422 transfert program has problems with some Emax 2. So,
Re: [emax] Re: Alan Wilder "sale"
2011-09-01 by Rish
He ll yes I m in, and I still think the clothes are cool, nor what I would wear but to put on the wall in a box...yup! Rish Life is like MIDI, your either IN,
Re: [emax] RS422 and Alchemy
2011-09-01 by LIFELIKE
Ah if emax 2, its the right OS version then! (2.14). Have you checked that midi is turned on in the emax? For emax 1 i think the os is version 4.0 or something
Re: Alan Wilder "sale"
2011-09-01 by blchrr@...
People could club together, 10 people at £20 (low end of estimate) or £40 each (high end of estimate) .. could buy one disk (looks like all disks have the
Re: [emax] Re: Alan Wilder "sale"
2011-09-01 by Johnny Tomasello
£ 400 for a single sound disk is ridiculous. And clothes? Really? It s kind of embarrassing, I think.
Re: [emax] Re: Alan Wilder sale
2011-09-01 by Rish
It s still really cool, wouldn t be sweet to own one of those outfits! I would have it on the wall of my studio. Rish Life is like MIDI, your either IN, OUT or
Re: [emax] RS422 and Alchemy
2011-09-01 by Francis Cote
Hi. I use the serial port. I ve seen at least one Emax 2 being sold with the same Powerbook and Alchemy. I ll look for that tweaked OS. I m using 2.14. Thanks
Re: Alan Wilder sale
2011-09-01 by medusso74
... I think all contains the same sounds, just the Emax II has some disks with factory and probably custom samples. Cheers, Medu
Alan Wilder sale
2011-09-01 by pst248
I figure a good share of the Emax fans are also Depeche Mode fans, so figured I d throw in a reminder for his garage sale this weekend:
Re: [emax] RS422 and Alchemy
2011-09-01 by LIFELIKE
Hi Françis, You must use the modem port with Alchemy,also you need to have the latest version of emax os, The one upgraded by the Emulator genius that did the
Re: [emax] RS422 and Alchemy
2011-09-01 by Francis Cote
Back from vacation. I ve tested the serial port of my powerbook with my serial MOTU Midi timepiece and it works fine. So I guessed it had to be the cable, so i
RE: [emax] Re: Can't install Omnniflop Driver on Windows 7 ?
2011-08-30 by el macaco
I can t remember the color, but I will check when I get home, and I will also check the BIOS again for enable floppy A or B. When I run Omniflop it askes me to
Re: [emax] Re: Can't install Omnniflop Driver on Windows 7 ?
2011-08-30 by jammie.emma@...
in your bios it should enable floppy either floppy a or b ... From: el macaco To: Sent: Tuesday, August 30,
Re: [emax] Re: Can't install Omnniflop Driver on Windows 7 ?
2011-08-30 by jammie.emma@...
what colour is it mine is blue ... From: el macaco To: Sent: Tuesday, August 30, 2011 3:27 PM Subject: RE:
RE: [emax] Re: Can't install Omnniflop Driver on Windows 7 ?
2011-08-30 by el macaco
Thanks Jammie, It has a floppy cable connector inside, and that s what I connected my old floppy drive to with the old cable. Could this still have a USB
Re: [emax] Re: Can't install Omnniflop Driver on Windows 7 ?
2011-08-30 by jammie.emma@...
thats usb mode for floppy drive slot it enables a usb header pin for usb floppy and flash drive check to see that your motherboard has a floppy controller see
RE: [emax] Re: Can't install Omnniflop Driver on Windows 7 ?
2011-08-30 by el macaco
Thanks Jammie & Cowboy, Good point. I will make sure the floppy is working with the regular driver (I really only need the floppy for the emax so that s all I
Re: Can't install Omnniflop Driver on Windows 7 ?
2011-08-30 by thenewyorkcowboy
In my experience there are basic differences sometimes with hardware compatibility. Just because you think your floppy drive from your old hardware is in
Re: [emax] Re: Can't install Omnniflop Driver on Windows 7 ?
2011-08-29 by jammie.emma@...
1 question have you enabled the floppy controller in the bios of the motherboard as most are shut of also have you not got scsi on your machine ... From: el
RE: [emax] Re: Can't install Omnniflop Driver on Windows 7 ?
2011-08-29 by el macaco
Thanks Kris, My motherboard had a floppy connector and I grabbed the floppy from my old PC. I only use EMXP with my Emax, so that s all the functionality I
Re: Can't install Omnniflop Driver on Windows 7 ?
2011-08-29 by esynthesist
Hi Ed, I m not really aware of people using Windows 7 64bit with EMXP and OmniFlop - I can not say for sure that it works, I don t have a Windows 7 system to
Re: looking for a motherboard emax II Rack
2011-08-29 by Vavasseur Philippe
My motherboard does not work the control panel and not necessarily have to come with I need this motherboard quickly thanks for all philippe everyone I am
Re: [emax] looking for a motherboard emax II Rack
2011-08-29 by Rish
Can the display from a standard Emax work? Rish Life is like MIDI, your either IN, OUT or THRU. ... [Non-text portions of this message have been removed]
looking for a motherboard emax II Rack
2011-08-29 by Vavasseur Philippe
Hello everyone I am looking for a motherboard emax II Rack even with 1 MB Memory also the control panel LCD even if the LCD does not work very urgent thank
RE: [emax] Can't install Omnniflop Driver on Windows 7 ?
2011-08-29 by el macaco
Thanks Jammie, But I am installing logged in as administrator, at least it lets me go through with it and I have other admin access. There are instructions on
Re: [emax] Can't install Omnniflop Driver on Windows 7 ?
2011-08-28 by jammie.emma@...
you need to install it as administrator ... From: elmacaco@hotmail.com To: emax@yahoogroups.com Sent: Sunday, August 28, 2011 5:40 PM Subject: [emax] Can t
Can't install Omnniflop Driver on Windows 7 ?
2011-08-28 by elmacaco@...
Hey Guys, I have a new windows 7 Home premium 64 bit machine, my motherboard has a floppy drive connector and it works with the standard Windows driver. When I
Re: [emax] Still Problems with CardReader
2011-08-25 by jammie.emma@...
might have to either downgrade the firmware or up date it ask ted tell him what firmware your using and he can tell which one to use to make it work ... From:
Re: [emax] Still Problems with CardReader
2011-08-25 by jammie.emma@...
i use an ide sf card reader with the scsi to ide converter and use sandisk 500mb cards ... From: Wolfram Niessen To: emax@yahoogroups.com Sent: Thursday,
Still Problems with CardReader
2011-08-25 by Wolfram Niessen
Dose anybody use the 7720U with a IDE card reader? Do I need a a CF card with DMA support? Is it necessary to use a PCMCIA adapter, or can I use a IDE Compact
Re: [emax] does anybody understand the sequenceing on these units how do you set your bars is there better software to control this problem
2011-08-25 by Ted Summers
The manual is available at Emulator Archive. You can put an external drive with correct connectors and PLUS OS 1.0. Many are going with an internal Flash drive
does anybody understand the sequenceing on these units how do you set your bars is there better software to control this problem
2011-08-25 by Roy Thomas
the sequenceing on these units sucks i have a emax hd keyboard where can i find a manuel for this unit and not the one for the emax l l ? is it possible to put
RE: [emax] Re: hello
2011-08-22 by philippe.69
http://img.audiofanzine.com/image.php?lang=fr&identifier=image&size=normal&m odule=user&userPhoto_id=23535
RE: [emax] Re: hello
2011-08-22 by philippe.69
http://philippe.69.free.fr/EmaxIIClavier/FILE2060.JPG http://philippe.69.free.fr/EmaxIIClavier/pinLecteurSlim.JPG les pins du lecteur original de l Emax -
RE: [emax] Re: hello
2011-08-22 by philippe.69
Compact flash Transcend 512MB 80x PCD-50B SCSI firmware DMFLEX_PCD50B_V128.bin http://philippe.69.free.fr/EmaxIIClavier/9.JPG
Re: [emax] Re: hello
2011-08-22 by w.niessen@...
I already tried that, but the same problem. Which Card Reader do you use? Thanks Wolfram
Re: hello
2011-08-22 by Vavasseur Philippe
hello
2011-08-22 by Vavasseur Philippe
we must put the cfg in the PCMCIA slot with adapter in the cf slot below It will never work @++ philippe
Re: [emax] Problem with EMAX 1 and CF Card
2011-08-22 by w.niessen@...
how can I do this??? I use Sandisc 128MB an 256MB Cards. like this...
Re: [emax] Problem with EMAX 1 and CF Card
2011-08-22 by jammie.emma@...
have you set the cf card to work with dma and have you set the scsi to ide to use dma ... From: Wolfram Niessen To: emax@yahoogroups.com Sent: Monday, August
Problem with EMAX 1 and CF Card
2011-08-22 by Wolfram Niessen
Hi, I have a 7720U SCSI Bridge which works fine withe a ZIP Drive. But with my CF Card Reader I have a Problem. I can Format the Card and Boot from it but if I
Selling my emax II 2 mb.... Orlando Florida
2011-08-20 by phietamu90
$300.00 on ebay only one day left. Only selling one of my 2 Emax s. Keeping the other one for now. this is the link if interested. Good luck Im in Orlando