Re: [emax] Sample slice possible on Emax?
2011-10-03 by jammie.emma@...
assign the sample again to the next key you want and change the start and loop if you truncate you are basically chucking the rest of the sample away thats how
Messages
Browse messages
Page 81 of 236 · 11758 messages matched
Sample slice possible on Emax?
2011-10-03 by mlivingston8
So I took the weekend to to wrap my head around creating my own sample disks with the Emax. I got really far converting samples with EMXP as well as real time
Re: [emax] Re: Dumb question from a newbie - Can't format a ZIP on EMAX II
2011-09-29 by jammie.emma@...
it can only format 250 zips in a 250 drive it will read 100 zip disks only try formating a 250 zip disk ... From: jammie.emma@blueyonder.co.uk To:
Re: [emax] Re: Dumb question from a newbie - Can't format a ZIP on EMAX II
2011-09-29 by jammie.emma@...
yres it does it wont format 100 zip disks thats your problem it can only read them ... From: factormax86 To: emax@yahoogroups.com Sent: Thursday, September 29,
Re: Dumb question from a newbie - Can't format a ZIP on EMAX II
2011-09-29 by factormax86
Update: I examined the way I d plugged in the ZIP drive to the EMAX, and found that the SCSI cable was the wrong way round per the ZIP Drive Manual (which
Re: [emax] Dumb question from a newbie - Can't format a ZIP on EMAX II
2011-09-28 by Pete Catley
Thanks for the reply Yes, it just sits there saying Not an Emax 2 drive I m going to try the basics - unplugging & re-plugging etc, and see if I can
Re: [emax] Re: Dumb question from a newbie - Can't format a ZIP on EMAX II
2011-09-28 by Pete Catley
Thanks, I guess that s not what I was hoping to hear. I thought maybe I was doing something stupid. I ll try unplugging & re-plugging etc. a few
Re: [emax] How to determine which DRAM chip fails in EMAX II?
2011-09-28 by jammie.emma@...
a logic anyliser is the only way you will know for sure which ic is bad either get a pc usb software 1 about £100 or a proper hardware 1 £600-1000 depending
Newbie!
2011-09-28 by Luke Bretthauer
Hi Guys, I am a fresh face around here so hello and thanks for creating this group! I just found myself an emax SE HD and am getting my head around it slowly.
Re: Email for Stereo Sampling silent auction bid
2011-09-28 by Luke Bretthauer
Hi Guys, I am a fresh face around here so hello and thanks for creating this group! I just found myself an emax SE HD and am getting my head around it slowly.
Email for Stereo Sampling silent auction bid
2011-09-27 by mishon53511
Ok sorry the Email to send a bid on the EMAX ll Stereo sampling update is: Rish AT radiofreeyouth dot com I think you can simply look it up as a user on this
EMAX ll Stereo sampling update for sale.
2011-09-27 by mishon53511
I have one EMAX ll Stereo upgrade kit still in the box, EMU part number 2211. This EMAX ll Stereo upgrade is 100% complete with: Retrofit instructions 5326
Re: Dumb question from a newbie - Can't format a ZIP on EMAX II
2011-09-27 by esynthesist
This is not normal... The Emax-II should *not* check the disk for Emax-2 compatibility at all when selecting the Master- 5.Format Disk option It will only
Re: [emax] Re: Emax SCSI issues
2011-09-27 by Ted Summers
Well, I have tried an NEC, Sony, and TEAC successfully- someone else tried a Mitsumi. I don t think compatibility is much of an issue. I used TEAC FD-05x
Re: [emax] Re: Emax SCSI issues
2011-09-27 by Johnny Tomasello
I found some slim floppy drives online, but am not sure if they re compatible with the Emax I. I looked through the group and didn t find any specs. Is there
Re: [emax] Re: Emax SCSI issues
2011-09-27 by jammie.emma@...
£5 on ebay ... From: timbreadvantage To: emax@yahoogroups.com Sent: Tuesday, September 27, 2011 6:49 PM Subject: [emax] Re: Emax SCSI issues Sounds great-
Re: Emax SCSI issues
2011-09-27 by timbreadvantage
Sounds great- Have any for sale?
Re: Emax SCSI issues
2011-09-27 by timbreadvantage
Thanks- will give it a go..
Re: [emax] Dumb question from a newbie - Can't format a ZIP on EMAX II
2011-09-27 by Francis Cote
Hi, I got my Emax 2 about 2 months ago and I had no issues formatting a Zip. There is a write protection on ZIp disks, but you wouldn t be able to format it on
Dumb question from a newbie - Can't format a ZIP on EMAX II
2011-09-27 by factormax86
Hi all, Just joined the forum having just obtained an EMAX II (had an EMAX I for a while). It s a 2212 that has been expanded to 4Mb memory. I m booting from
Re: Emax SCSI issues
2011-09-26 by esynthesist
You can generate this CF image yourself with EMXP. This can be done by creating an empty Emax-I HD/CD image (option 1.5.2) and then copy the Plus OS to it
Re: [emax] Re: Emax SCSI issues
2011-09-26 by Ted Summers
This is exactly why every one of my units has a slim floppy in it..... On Mon, Sep 26, 2011 at 7:04 AM, timbreadvantage ... [Non-text portions of this message
Re: Emax SCSI issues
2011-09-26 by timbreadvantage
I have been having a similar issue with my Emax SE HD rack, My floppy drive has failed- I have the old Miniscribe drive (works but is soooooo loud). Have the
Re: [emax] New Owner - Emax II Power-cycles
2011-09-18 by HF
Welcome to the family:). I keep going back to these old hardware samplers as well.
New Owner - Emax II Power-cycles
2011-09-18 by officialteenparty
I just got a used Emax II and so far it seems to work fine, although I haven t been able to do much with it since I ve been busy/about to move and I don t have
Re: [emax] SCSI upgrade kits available anywhere?
2011-09-14 by Ted Summers
my PC333 (rev 3) Baldwin didn t have the right ICs. So I wouldn t say that is true 100% of the time. But I will update my wordpress site later to more clearly
Re: [emax] SCSI upgrade kits available anywhere?
2011-09-14 by jammie.emma@...
dont need it with rev 3 board as it already has the scsi kit ... From: jdchevallier To: emax@yahoogroups.com Sent: Wednesday, September 14, 2011 7:51 PM
SCSI upgrade kits available anywhere?
2011-09-14 by jdchevallier
I ve determined that I have a rev 3 board and would like to upgrade my emax se. Most of the links I ve found to them are old/expired. Does anyone know if they
Re: [emax] Re: Emax SCSI issues
2011-09-14 by w.niessen@...
And be sure that you put the Cable on the Mainboard is in Center of the connector. If you ever disconnected the Cable. Check it! On time I made this mistake
Re: [emax] Re: Emax SCSI issues
2011-09-14 by jammie.emma@...
issue with internal cable check that none of the strands has broken loose common fault caused by people pulling on the cable rather than useing a proper tool
Re: [emax] Re: Emax SCSI issues
2011-09-14 by jammie.emma@...
teds right you cant have 2 drives both on scsi 0 as only one will be seen usually the closest drive to the scsi controller ... From: Ted Summers To:
Emax Disassembly video
2011-09-14 by Simon
for those of you who may not be entirely comfortable dismantling your Emax for maintenance then here is the first of a few videos covering emax maintenance
This Kit changed all my life
2011-09-14 by Eddie Carrigan
I have always worked hard for what I wanted I had nowhere to turn this caught my eye so I just ran with it!
Re: [emax] Re: Emax SCSI issues
2011-09-14 by Scott Stanley
The only drives connected are the Slim floppy drive and the pcd-50b. The internal hard drive ceased to function. I tested this same floppy drive, PCD-50b,
Re: emax problem
2011-09-14 by jchatzilias
hey..thanks for the reply..so this is just how the emax works? they just made it this way to avoid aliasing artifacts?
Re: [emax] Re: Emax SCSI issues
2011-09-14 by Ted Summers
Yes, all jumpers removed is ID 0 on the PCD-50b Emax 1 s only boot from ID0, and that is what the HD is set to by default from the factory. If the internal HD
Re: [emax] Re: Emax SCSI issues
2011-09-14 by jammie.emma@...
no not really you need to make shure if not get the + os then it does not matter as the emax can address any scsi i.d then where as the emax hd software could
Re: [emax] Re: Emax SCSI issues
2011-09-13 by Scott Stanley
The only jumper I have set is on termination. All other jumpers have been removed so, it should already be set to scsi id 0, correct? -Scott On 2011-09-13, at
Re: [emax] Re: Emax SCSI issues
2011-09-13 by jammie.emma@...
0 you need to set the card drive to 0 or otherwise you will need the + os to see the card drive if it is not set to scsi id 0 ... From: Scott Stanley
Re: [emax] Re: Emax SCSI issues
2011-09-13 by Scott Stanley
Hi there, Yes I used a floppy which loads no problem as the source for formatting the CF card. -Scott On 2011-09-13, at 5:54 PM, Wolfram Niessen
Re: [emax] Re: Emax SCSI issues
2011-09-13 by Scott Stanley
When the SCSI is backwards, the floppy will not load the OS. I have not tried using EMXP yet but, that OS a good idea. Thanks for the suggestion. Question...
Re: Emax SCSI issues
2011-09-13 by Wolfram Niessen
Hi, I ask carefully, but did you use the Floppy as Source if you format the CF?
Re: Emax SCSI issues
2011-09-13 by kconnor9000
Dumb point to mention perhaps, but it s possible to plug in internal SCSI connector in backwards fashion, no? I hope it s something simple like that, for you.
Re: [emax] Emax SCSI issues
2011-09-13 by Ted Summers
I wouldn t even try the 2gb card. The SE update has nothing to do with the issue. It really is a flipped bit in the 93C06 EEPROM and what is added in the OS on
Re: [emax] Emax SCSI issues
2011-09-13 by Scott Stanley
Hey Ted, I took the Connor drive out as it was pretty loud and not saving correctly. At the moment it is just Emax cf drive termination. I tried a
Re: [emax] Emax SCSI issues
2011-09-13 by Ted Summers
I wouldn t recommend you use a flash any larger than 256MB.... Emax only formats to 20MB anyways.... The drives don t need to be external. If you have the
Emax SCSI issues
2011-09-13 by Scott Stanley
I am installing a slim floppy drive and PCD-50b into an Emax HD (non SE) rack, model #1021, serial # 028541, CPU PCB PC 333 Rev A. The Emax HD can see the slim
Emax 10k slider replacement
2011-09-10 by Adam
Hello, anyone know where could we get 10K sliders for the Emax? EPRElectronics sells the 50k sliders as they run out of the 10k ones, but the 50k will not work
Alchemy Software Manuals?
2011-09-10 by Beto
Greetings...finally got some different versions of the Alchemy Software Versions from 2.52-3.0, does anyone know where I can get online manuals or if anyone
Re: [emax] Re: emax problem
2011-09-08 by jammie.emma@...
if you want 1 sample for the whole keyboard yo need to sample at c6 as it will only transpose up to its maximum playing frequency which is usually double max