Re: emax problem
2011-09-08 by .... ...
When you load a disk with a sound keymapped across the keyboard, it works because the disk has a multisampled set that it loads. The emax can only pitch a
Messages
Browse messages
Page 82 of 236 · 11758 messages matched
emax problem
2011-09-08 by jchatzilias
hey...i love my emax..but when i sample something..i can t define the keyrange of the sample higher than a few semi tones...any one familiar with this problem?
Re: [emax] Re: Emax Model Numbers for SCSI External Retrofit
2011-09-08 by Ted Summers
Go for compact flash and slim floppy. well worth the investment IMO. http://djtbs1.wordpress.com/2010/10/04/some-install-related-pics/ On Sep 7, 2011, at 5:26
Re: Emax Model Numbers for SCSI External Retrofit
2011-09-08 by John
Sorry Didn t mean to imply you wanted to outbid me. Paranoid about getting one back I suppose. I seem to covet them now that I don t have one and the Alan
Re: [emax] Re: Emax Model Numbers for SCSI External Retrofit
2011-09-07 by Johnny Tomasello
Sorry, I didn t ask for the link to try and out bid you, I have 2 Emax racks... I just wanted to see if there was any info in the auction, as Ted said the
Re: Emax Model Numbers for SCSI External Retrofit
2011-09-07 by John
It is an SE unit however. That s good!
Re: Emax Model Numbers for SCSI External Retrofit
2011-09-07 by John
Verified via the photos and asking that there is no external midi connector. Thank you I will see if he will open it up and take a look. Thank you!
Re: Emax Model Numbers for SCSI External Retrofit
2011-09-07 by John
I requested the Board Rev number from the owner through ebay message. I don t know if he will open it or not to find out. I hope I didn t blow my chance of
Re: [emax] Emax Model Numbers for SCSI External Retrofit
2011-09-07 by jammie.emma@...
model number 10000 means nothing get hip to open the synth up and tell you what revison mother board it is if its 1 then no chance if its revision 2 then yes
Re: [emax] Emax Model Numbers for SCSI External Retrofit
2011-09-07 by Ted Summers
My understanding is--- No one can easily answer that. The serial numbers don t correspond to board rev #s. That a version 1 board which can t be upgraded to
Re: [emax] Emax Model Numbers for SCSI External Retrofit
2011-09-07 by Johnny Tomasello
Is there a link? ... [Non-text portions of this message have been removed]
Emax Model Numbers for SCSI External Retrofit
2011-09-07 by John
There is an emax on ebay with model #1000 on the back. Can this be retrofitted to house an internal zip drive? Please help me out fellow emaxer s before I
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-05 by jammie.emma@...
but the mother board is the same and i would say its the mother board not display did you test the voltages like i said on the volume pot and the value pot as
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-05 by Ted Summers
if the issue is mainboard or audio board you can move just that board. On Sep 4, 2011, at 11:39 PM, philippe.69 wrote: the rack not been displayed in My eBay
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-05 by philippe.69
the rack not been displayed in My eBay version of the keyboard can not be installed in a rack the control panel are not the same ... De : emax@yahoogroups.com
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-05 by Ted Summers
Emax 2 Rack http://www.ebay.com/itm/E-mu-EMAX-2-/320754022685?pt=LH_DefaultDomain_0&hash=item4aae6df91d Emax 2 Keyboard
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by philippe.69
ted there is nothing on ebay if you ever see something a email thank you thanks, philippe ... De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by philippe.69
4051 IC 5 I install a new the problem does not change with Jammie the conclusion of ic 13 tomorrow I will change if the one at the store if it still does
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by Ted Summers
No one on the group appears to be selling a board at this time. your options are simple: 1) Repair your Emax board -either repair yourself or -help from
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by philippe.69
I want a motherboard just to rack emax II if anyone has one for sale ... De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Music Go Round
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by Music Go Round Duluth, Minnesota
Again...... Hi, I don t quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by Music Go Round Duluth, Minnesota
Hi, I don t quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks!
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by Music Go Round Duluth, Minnesota
Hi, I don t quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks!
Re: [emax] Re: Alan Wilder "sale"
2011-09-04 by Rish
So who s going to the auction? Rish Life is like MIDI, your either IN, OUT or THRU. ... [Non-text portions of this message have been removed]
Re: Alan Wilder "sale"
2011-09-04 by PHILIP MUNRO
I am also very keen to join a group bid. Just let me know what to do. Many thanks, Phil [Non-text portions of this message have been removed]
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by philippe.69
PSU 12v 5v FLOPPY DRIVE ok regulators 7805 ok 7905 +5V -5V OK ... De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by jammie.emma@...
right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage
Re: [emax] Re: Alan Wilder "sale"
2011-09-04 by uh
you can count me in as well... On Sep 3, 2011, at 4:32 PM, ingcortez2000 wrote: I m 100% interested guys !!!... Count me in!...
Re: [emax] Re: Alan Wilder "sale"
2011-09-04 by Joel Chevallier
I m a new member but also very interested I m pitching in on the sample disks! Joel Chevallier ... [Non-text portions of this message have been removed]
Re: Alan Wilder "sale"
2011-09-03 by ingcortez2000
I m 100% interested guys !!!... Count me in!... ingacortez2000@yahoo.com.mx andresgennez1977@hotmail.com
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by philippe.69
I think a IC5 -- HCF4051 ... De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@blueyonder.co.uk Envoyé : samedi 3
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by philippe.69
hello jammie can you look on the pdf here to identify IC look at your mail boxjammie.emma@blueyonder.co.uk I will attach the pdf of r.a.m.s@free.fr my mail
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by jammie.emma@...
it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by philippe.69
the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ??
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by Ted Summers
What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? ... [Non-text portions of this message have been removed]
Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by Vavasseur Philippe
I need this motherboard Quickly I wait selling proposition
Re: [emax] Re: RS422 and Alchemy
2011-09-02 by Francis Cote
If it worked with your Emax 2, that demonstrates that the ports on Powerpc machines work. Which a bit contradicts what I ve seen in responses... I wonder if I
Re: [emax] Re: RS422 and Alchemy
2011-09-02 by Ted Summers
Yes, I read in full banks and sent them back. But that was an Emax 1. At the time I didn t have an Emax 2. I would have to look at the schematic, but I BELIEVE
Re: [emax] Re: Alan Wilder "sale"
2011-09-02 by Rish
J So what...now your not gonna play in my Depeche Mode tribute to Elvis band? What s with you! Come on dont be the Vince Clarke of the band, everyone knows
Re: [emax] Re: RS422 and Alchemy
2011-09-02 by Francis Cote
Hi, I found a diagnostic guide for Emax but not for Emax 2 on the group s files section. I saw a sort of Rs422 in it, is it the same for the Emax 2? I ve been
Re: [emax] Re: Alan Wilder "sale"
2011-09-02 by Johnny Tomasello
I understand that people like to collect memorabilia, and I didn t mean to take the joy out of that for anyone. As an artist (if I can say that), I subscribe
Re: Alan Wilder "sale"
2011-09-02 by pst248
Oops, I guess the 80s fashion thing was from the TX-816 list... my mistake. But still. ;)
Re: [emax] Re: Alan Wilder "sale"
2011-09-02 by leoacqualung
i´m interesed too in this ,please contact me ________________________________ De: blchrr@homecall.co.uk Para: emax@yahoogroups.com
Re: Alan Wilder "sale"
2011-09-02 by pst248
It s all relative. If you look at what some people will charge for a sample disc, I think one could still buy the whole batch and still turn an eventual
Re: [emax] Alan Wilder sale
2011-09-01 by leoacqualung
i´m interested ,please contact me again... [Non-text portions of this message have been removed]
Re: [emax] Re: Alan Wilder sale
2011-09-01 by leoacqualung
________________________________ i´m interested ,please contact me again... [Non-text portions of this message have been removed]
Re: [emax] Re: Alan Wilder sale
2011-09-01 by leoacqualung
________________________________ please contact me again and tell about it!!! thanks., [Non-text portions of this message have been removed]
Re: [emax] Re: RS422 and Alchemy
2011-09-01 by LIFELIKE
french language error, its written like that in French :-))) sorry Francis. hope you ll get your setup to work soon!
Re: [emax] Re: RS422 and Alchemy
2011-09-01 by Francis Cote
Thanks Johnny, I have tested the RS422 port with a MOTU Midi Timepiece AV MIDI interface (old serial model) and it works fine. ... [Non-text portions of this
Re: [emax] Re: RS422 and Alchemy
2011-09-01 by Francis Cote
Thanks for confirming this. This will add yet another machine to my pile of useless junk! :) Sad, It s a sexy machine. I know the cable is fine. I tested the