CZ Android photo uploaded
2002-09-30 by Chris L.
I uploaded an image into the photos section, so take a look if you like. http://photos.groups.yahoo.com/group/CZsynth/lst It s a painting of a robot playing a
Messages
Browse messages
Page 125 of 145 · 7206 messages matched
Re: [CZsynth] Detune and Master Tune not working on cz-101
2002-09-30 by Maxim Potekhin
... When this button is pressed, the CZ-101 is supposed to start glowing and sort of shimmer and fade, than come back. If this doesn t happen, take it in for
Re: [CZsynth] Detune and Master Tune not working on cz-101
2002-09-30 by msg@matucana.de
HI SRLSOC, did you press a key with a sustain sound and press one of the keys? you should hear that the cz tunes. but, if you meant you did not SEE anything,
Detune and Master Tune not working on cz-101
2002-09-30 by srlsoc
I just received a cz-101 that I got from ebay and everything appears to work fine except for the detune and master tune buttons. When one of these buttons is
AW: [CZsynth] CZ cart schematic uploaded
2002-09-30 by Ullrich Peter
Hallo Terry! ... Thank you very much! This is the best message for a long time as I was looking for the cartridge schematics or a cartridge itself for a very
Re: CZ cart schematic uploaded
2002-09-29 by Joanna Kurki
... Nice. And thanyou for finding and uploading these files. It saves a lot time for having not to reverse engineer existig cartridge. Anyone having schematic
anyone wanna trade RAM carts?
2002-09-29 by Atom 'Smasher'
i ve got a Maartists MusicPak CZ RAM cart. it holds 4 banks of 16 patches. it uses 2 slide switches to select between the 4 banks. this cart will hold 64
CZ cart schematic uploaded
2002-09-29 by Terry
Hi Everybody, Just uploaded some schematics for an RA-3 and a DIY cart. They can be found in the CZ docs file section. The RA-6 is backward compatible with
Re: [CZsynth] CZ-1 RA-6 ram cartridges (5) for sale can they beused for any of the other CZs
2002-09-29 by James Greif
I would also be interested in a RA-6 ... _________________________________________________________________ Send and receive Hotmail on your mobile device:
Re: [CZsynth] CZ-1 RA-6 ram cartridges (5) for sale can they be used for any of the other CZs
2002-09-29 by Ronday Lucien
Hi, The RA-3 for CZ-1000 serie and CZ 1 have the same size. I think, but I don¹t have the possibility to try, that both cartridges work on CZ the CZ synth.
Re: [CZsynth] CZ-1 RA-6 ram cartridges (5) for sale can they be used for any of the other CZs
2002-09-25 by Erik Dahl
How much are you selling these for? Erik ... __________________________________________________ For years I labored with the idea of reforming the existing
Re: [CZsynth] CZ-1 RA-6 ram cartridges (5) for sale can they be used for any of the other CZs
2002-09-25 by Maxim Potekhin
How much do you want for these?
CZ-1 RA-6 ram cartridges (5) for sale can they be used for any of the other CZs
2002-09-25 by ohavim
I have 5 RA-6 ram cartidges for sale that fit in the Casio CZ-1 synthesizer. Does anyone know if they can be used in any of the other CZ synthesizers? If
AW: [CZsynth] Re: CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-23 by Ullrich Peter
Hi Maxim! ... Yes, in Austria. But I would pay the postage for worldwide shipping - no problem. Di you have one for sale? Ciao Peter |/ (o o)
Re: [CZsynth] Re: CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-23 by Maxim Potekhin
Hi Peter, where are you located? In Europe? thanks Maxim
RE: [CZsynth] Re: CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-22 by Ullrich Peter
Hi! ... The exact schematic is normally quite simple, as they use standard static CMOS rams. ... Easy standard memory interface. ... I have a logic ananlyser
Re: [CZsynth] way to sync vibrato to midi?
2002-09-21 by Scott Nordlund
... I managed to freak out my DW-8000 once by sending it random sysex data. It sets the parameters beyond their intended values, mostly not doing anything
Re: CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by Joanna Kurki
... I have not seen any schemas of those but by looking those pictures of opened carts they seem to contain 1 memory chip (sram?) with battery backup , one
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by xpander
That s cool - Never heard that about the Polaris (only played one of those once my entire life) I love anything with with a ring modulator oh yeah, pongy...
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by Maxim Potekhin
... Do you know how to access the pong? Coincidentally, I m taking a shipment of a K2000R tonight and would like to try it out. Maybe I ll just relegate it to
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by xpander
really and truly. I used the LFO as a cheap Delay (LFO AMP) ...makes it quite noticeable- easier to hear than a subtle vibrato. synths have lots of
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by Maxim Potekhin
... Jon, thanks for your $.02 in hard currency. I think most synths would hickup when bombraded with a massive CC stream. The worst I had was the old release
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by Scott Nordlund
... Really? I ve got an EPS and I never noticed it on mine.....maybe it has to do with the OS version
RE: [CZsynth] way to sync vibrato to midi?
2002-09-20 by Furman, Jon W.
I ve been try to refrain from jumping in on these good conversations because I m real busy here at work but I have to say that I ve seen it on the VZ s. You
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by Maxim Potekhin
... Yeh, basically I just wrote an extended review of VZ-8m, and stayed up last night programming a couple of patches from scratch. I m very impressed. So the
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by Maxim Potekhin
So far I haven t observed such slowdowns on any Casio machines.
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by xpander
The Ensoniq EPS samplers had LFOs that would change rates depending on how many notes you were playing... so a 30 rate would be slower when you played more
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by Scott Nordlund
... ooh lovely hope you ve got a tips and tricks style page. there can never be too many of those....
Re: [CZsynth] CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by Maxim Potekhin
I suppose that s been dicsused... But does anybody know the schematics of such cards? Maybe we can put together a replacement, a few chips in a small project
Re: [CZsynth] CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by Scott Nordlund
... can t help there.. but I d say an RA-500 card would be a fair trade for my car (actually that s closer to the truth than I d like to admit)
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by Maxim Potekhin
... I m sure it s not. This has been discussed. The Casio units are rather slopes of the envelope segments, so there has to be a trigonometric function there.
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by Eitan Shefer
... interesting idea. Imho it should be enough to inspect speed 1 and 100, I m pretty sure the curve is liniar (but I m not next to the machine) -- - ((....
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by Eitan Shefer
... ah yes.. the hidden arpegiator in the CZ.. I remember showing that to some people in a school I visited in england ten or so yeares ago, they didn t beleve
Re: [CZsynth] way to sync vibrato to midi?
2002-09-20 by Maxim Potekhin
Since you are obviously technically inclined, would you consider recording the signal to your PC and inspecting the waveform in the Wavelab or something like
way to sync vibrato to midi?
2002-09-20 by chucklarge2000
Is there a way to sync the vibrato to midi clock. Or if not, does any one have a relation to the rate to vibrato #4 waveform to tempo or ms? I am trying to
Casio VZ10m at Ebay Germany (not mine)
2002-09-20 by Ullrich Peter
The auction ends in 2 hours! http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=906685196 Ciao Peter http://www.ullrich.at.tt
Re: CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by e001d
Thanks. Ok So IF I get this Cartrige, I ll contact you (if it is the RA-6) and we can trade? erik ... potential ... a 4 ... trade ... think ... cart will ...
Re: [CZsynth] Re: CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by Atom 'Smasher'
... ================ yeah, they ll all work, but you might not be getting the full potential out of them.... a cz-1 cart used in a cz-101 will only be able to
Re: [CZsynth] Re: CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by Maxim Potekhin
I somehow feel using Sysx dumps could be the best way to go with this synth and its limited memory. Maxim
Re: CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by e001d
Whoa... Since I m still new to the CZ-101 I m a bit confused with all the technical language. the CZ-1 Cartridge WILL work with the CZ-101 cartridge system,
Re: [CZsynth] CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by Atom 'Smasher'
... ================= not quite.... the CZ-101 cart holds 16 patches. some hold 16 patches x 4 banks, but the patches are still only available in groups of 16.
Re: [CZsynth] CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by Maxim Potekhin
I need a house badly, and I have a very nice Maartist cartridge, like new, in the original box. If someone is willing to trade, drop me a line. Maxim
Re: CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by e001d
COOL!!!!! YEAH YEAH YEAH! I m not sure if I have access to more than 1, but I might, if I do I ll buy as many as possible and then redistribute them here!
Re: [CZsynth] CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by James Greif
You can trade those things for small houses in some parts of the world. Super hard to come by. ...
Re: [CZsynth] CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by Maxim Potekhin
They are the same. If you have access to these, can you get more? Maxim
CZ-101 Cartridges and CZ-1 cartridges...same?
2002-09-20 by e001d
Hello- I m new to the CZ-101 and CZ family and I was wondering is anyone knew if the CZ-1 cartridges work with the the CZ-101 cartridges? Can I use the CZ-1
Re: [CZsynth] two cz101s off one power supply?
2002-09-20 by xpander
I wouldn t do that. But if you did- you d need a 9Volt 1,700 mA power supply. ____________________________________ Todd S. Sierra Madre Cinema Council
two cz101s off one power supply?
2002-09-20 by chucklarge2000
Is this possible and is it a good idea? thanks, chuck
Re: New VSTi - PlastiCZ!
2002-09-20 by Joanna Kurki
... I think I may welll purchase it still.. It has soem neat sound qualities.. that rhoughness is ReFX trademark and allthough I don t much preciate eyecandy
Re: [CZsynth] New VSTi - PlastiCZ!
2002-09-19 by Scott Nordlund
... I ve got a VZ-10M _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail.