Re: [Digital BW] Re: Jumping in
2003-04-14 by Jerry Olson
... 1280, MIS VM inks, Nomorecarts CIS system, Paul Roark s curves, Media Street s Enhanced Black ink. Jerry
Messages
Browse messages
Page 1607 of 2186 · 109257 messages matched
Re: [Digital BW] Jumping in
2003-04-14 by Jerry Olson
I d get the 1280, MIS VM inks, A Nomorecarts CIS system, Enhanced Black from media street for the black ink, and use Paul Roark s curves. This is the least
Re: Jumping in
2003-04-14 by bob_michaels
Jimmy: I think that s also the best way. Of course, others have different opinions but I may say this is a majority view. Bob Michaels
[Digital BW] 1280 v0890 was: Re: Jumping in
2003-04-14 by bob_michaels
I have both printers. They seem the same except the 1280 prints wider, and the 890 color ink cart has less capacity. I can find no other differences. They
RE: [Digital BW] Horrible banding with new 1280 and eboni ink
2003-04-14 by Alessandro Pardi
Three weeks later, here comes the report: after a few test prints with the OEM inks, I switched seamlessly to the FS carts, printed just one purge page (you
Re: [Digital BW] ink not coming out...
2003-04-14 by Sam
Put a normal ink cart in there and run it for a while. Original ink might fix it. In the meanwhile, block ur cart up so it doesnt dry off. Sam ... From: Chris
UltraTones what to do?
2003-04-14 by colingruk
Hi folks, and especially Paul Roark, I am using MIS –FSN on an 1160 using the Randall workflow, Gen4 with MSFS k on a 1290 and am using a 2100 with Photo
Re: [Digital BW] ink not coming out...
2003-04-14 by Chris Hargens
Are you using a CFS? You might try the MIS website for info concerning problems with foam and how to deal with them. Chris Hargens
Re: [Digital BW] Epson RC paper alternative
2003-04-14 by Richard Vanek
Hello, Did anybody tried Ilford SMOOTH FINE ART paper? Look at http://www.ilford.com/html/us_english/prod_html/galerie/htm/prod/sfap. htm They write about
Re: [Digital BW] Re: Jumping in
2003-04-14 by xyz
... Well, dude, we didn t need to sign up for this forum if we were gonna print on the 2200 using OEM ink, did we? I m in the same place you are--I plan on
Re: Jumping in
2003-04-14 by j lichtman
ok, so that s the easiest way, i follow all that. what is the best way? -jimmy
[Digital BW] ink not coming out...
2003-04-14 by michael meyer
hey all. i have been using my epson 890 with MIS FS inkset in carts, which i have been refilling, successfully for the past month or so. while my results have
Re: Jumping in
2003-04-14 by bob_michaels
The easiest way is: buy a 1280 and go to Clayton Jones website about Black Only printing http://www.cjcom.net/digiprnarts.htm Read what he has to say then
Jumping in
2003-04-13 by j lichtman
This is my first post post here, please bear with me. I d like to start doing digital BW printing. Do I buy a Epson 1280, or a 2200 (and hope a more then
Re: [Digital BW] MIS FS Neutral vs Standard
2003-04-13 by Richard Sintchak
Sunday, April 13, 2003, 1:23:15 PM, Tim Atherton wrote: TA In the MIS FS inksets, is there a complete difference between the two TA inksets (for a 4 ink
RE: [Digital BW] Re: ilford paper supplier uk
2003-04-13 by Tim Atherton
... People really like those ebony s - and if the price is good, great. Their website has tons of info and downloadable catalogues.
Re: [Digital BW] Re: ilford paper supplier uk
2003-04-13 by Julian Thomas
I was just doing research as to what format to go for. My horseman 6x9 is now on ebay - I was hoping for more variety but I guess I ll go with 4x5. There is a
MIS FS Neutral vs Standard
2003-04-13 by Tim Atherton
In the MIS FS inksets, is there a complete difference between the two inksets (for a 4 ink printer) - Standard vs Neutral, or is it only one ink that is
RE: [Digital BW] Re: ilford paper supplier uk
2003-04-13 by Tim Atherton
Your best bet for Provia or Velvia might be Badger in the US (yes, I know you re in Spain...) - good prices and easy to deal with: http://www.badgergraphic.com
Re: [Digital BW] Re: ilford paper supplier uk
2003-04-13 by Julian Thomas
well its all your fault! seeing your pdf portfolio made me realise that if I now can t hold a camera steady and I m going to have to use a tripod I might as
RE: [Digital BW] UltraTone really work for glossy?
2003-04-13 by Paul Roark
... I don t have a 2200, so I d be curious how the Ultra Tone inks compare to the UltraChromes with respect to the bronzing and other RC paper problems. From
RE: [Digital BW] Epson RC paper alternative
2003-04-13 by Paul Roark
... I think I agree that we may not be there yet. I expect to see a lot of paper action in the next few years. I think we ll benefit from the large demand
RE: [Digital BW] Re: ilford paper supplier uk
2003-04-13 by Tim Atherton
... There s no such beast Julian... :-( tim
Re: [Digital BW] Re: ilford paper supplier uk
2003-04-13 by Julian Thomas
Thanks K2 - I was looking for the status of cheap 5x7 tranny film only to discover that it is virtually non-existant! Julian ... From: K2 Chittin
Re: ilford paper supplier uk
2003-04-13 by K2 Chittin
Julian It was me who sent you the link originally. I later learned that 7dayshop will only deliver to a UK address, although I m sure you ll find ways to get
Re: [Digital BW] Epson RC paper alternative
2003-04-13 by Julian Thomas
I ve used the classics with pigs and not had problems - but don t know about archivability. Julian ... From: Antonis Ricos To:
UltraTone really work for glossy?
2003-04-13 by Chris Hargens
I m getting the impression from the posts I ve read that the new MIS UltraTone ink set only seems to solve the bronzing problem with a few glossy papers and
Re: permajet papers
2003-04-13 by Antonis Ricos
... Steve, I haven t used them, but you can look up their info at: http://www.permajet.com/pages/home.html They are an English company much like Ilford, and
RE: [Digital BW] Re: Mid-Print Stop
2003-04-13 by Roger L Sopher
Thanks, Chris, I ll give it a shot. Roger ... From: Chris Hargens [mailto:ldmr@cruzio.com] Sent: Sunday, April 13, 2003 11:45 AM To:
Re: Mid-Print Stop
2003-04-13 by Chris Hargens
Try cleaning the rail the print head moves along, wiping it down with a bit of tissue dampened with alcohol. Then lubricate it using tissue with a few drops of
Re: [Digital BW] Epson RC paper alternative
2003-04-13 by Antonis Ricos
...and the Classics are not for pigment inks - so that s the problem with the whole RC / darkroom-looking print . These so called real photographic papers
Re: [Digital BW] Metamerism and MIS VM Inks
2003-04-13 by Peter Nelson
... Of course. I used to write inkjet printer dithering algorithms for my job in the 80 s. (today I write image processing software). I just chose a 2x2
permajet papers
2003-04-13 by Stephen Kobrin
I recently ordered some inks from MIS and asked them if they carried Hahnemuhle papers. I thought that the person on the phone said yes and they had a sample
Re: [Digital BW] Re: Print head cleaning
2003-04-13 by Loris Medici
Jim, thanks for the detailed desc. I m using the CIS (nomorecarts) for about 1 year and the problem started just after I added ink to my black bottle (the
Re: [Digital BW] Print head cleaning
2003-04-13 by Loris Medici
Thanks, Loris. ... From: Jerry Olson To: Sent: Friday, April 11, 2003 10:07 PM Subject:
Mid-Print Stop
2003-04-13 by Roger Sopher
My 860 has begun the annoying habit of stopping in mid print with all lights flashing. I dimly remember others mentioning a similar problem but I don t recall
Epson ethernet card
2003-04-13 by Amadou Diallo
I have an extra Epson type B internal ethernet card. I ve been using it on my 7500 and 9000 to print over my network. If interested, contact me offlist Amadou
ilford paper supplier uk
2003-04-13 by Martin (Virgin)
There are two companies that I know of: http://www.7dayshop.com/catalog/default.php?cPath=777 http://www.mx2.co.uk/acatalog/index.html I have ordered from
Re: [Digital BW] Re: ilford paper supplier uk
2003-04-13 by Julian Thomas
Thats the one, thanks Mark Julian ... From: m_r_tomlinson To: Sent: Sunday, April
Re: ilford paper supplier uk
2003-04-13 by m_r_tomlinson
... channel ... Try www.7dayshop.com Best Mark
Re: [Digital BW] Epson RC paper alternative
2003-04-13 by Julian Thomas
Don t forget though that the non- Classic Ilford papers are instant dry types and are not as archival as the Classic pearl and gloss. You are right though
ilford paper supplier uk
2003-04-13 by Julian Thomas
A while back someone sent me a link to a paper/film supplierin the channel islands but I ve lost the link. Anyone any ideas? Julian
[Digital BW] Re: Epson 2000P & MIS inks
2003-04-13 by Tom
Hey Sam, MIS has all you need! http://www.inksupply.com/index.cfm?source=html/workflow_roark.html the first table is of curves for various printers Tom ...
Re: [Digital BW] Re: Epson 2000P & MIS inks
2003-04-13 by Sam
Hi there Tom, Where can I download curves for my 1290?? Sam ... From: Tom To: DigitalBlackandWhiteThePrint@yahoogroups.com Sent: Sunday, April 13, 2003 7:17 AM
Epson RC paper alternative
2003-04-13 by sandersm@aol.com
A couple of posts asked for better alternatives to the Epson gloss and lustre papers for the bronzing/differential surface reflection problem. After finding
Re: [Digital BW] Re: printers....replace or repair
2003-04-13 by bgs
That sentence to you was the strangest sentence I wrote. The gulp was for the 2200....bgs ... From: Antonis Ricos To:
Re: Epson 2000P & MIS inks
2003-04-13 by Tom
Howdy Scott, I use the the MIS VM and FSN-E in my 2000P. I had to experiment a lot to find the right combinations that worked and looked good. since the 2000P
Re: [Digital BW] Re: printers....replace or repair
2003-04-13 by bgs
Bob.....I need the size!!! Barry ... From: bob_michaels To: Sent: Saturday, April 12,
Re: [Digital BW] Re: printers....replace or repair
2003-04-13 by bgs
Antonis, i am keeping my 1280 so it will be either another 1280 (gulp) the 2200. Unfortunately I ve hemorrhaging money! Thanks....Barry ... From: Antonis
Re: [Digital BW] Metamerism and MIS VM Inks
2003-04-13 by Roy Harrington
... Harrington ... .25 works pretty well 0, .25, .5 , .75, 1, 1.25, 1.50, 1.75, 2.0, 2.25, 2.5, 3.0, 3.25, 4.0. But the 2x2 example is simplified anyway -