Yahoo Groups archive
Messages
Page 11 of 564 · 28179 messages matched
2017-10-29 by del@cix.co.uk
Hi All A quick newbie question, if you don’t mind. I’d be grateful if someone could post the CV and Gate jumper settings for the A-185-1 Bus module. I acquired one of these modules a little while back but didn’t get around to fitting it. I vaguely remember finding something onlin
2017-10-28 by james.husted@mac.com
I think the problem there lies in the A-145 having only a +/-2.5 volt range. That is pretty low for a LFO, lower than the A-143-3, A-143-4 and most other companies LFOs. I understand your disagreement but one can say if you need a larger modulation range, use a A-183-3 or similar
2017-10-28 by Florian Anwander
Hello On 27.10.17 20:25 , james.husted@mac.com [Doepfer_a100] wrote: > Dieter - Please consider the option of making the variable CV in (on modules that have them) work so if the input attenuator is turned all the way up, that input tracks at 1v/Oct. This is a very convenient and
2017-10-27 by james.husted@mac.com
Dieter - Please consider the option of making the variable CV in (on modules that have them) work so if the input attenuator is turned all the way up, that input tracks at 1v/Oct. This is a very convenient and useful alternative too. -James > On Oct 27, 2017, at 2:09 AM, yahoo@do
2017-10-27 by Marlene Gutsch
hello thank you very much for answer. i find that's a great idea, really appreciate ! ciaoroland Von: "yahoo@doepfer.de [Doepfer_a100]" An: Doepfer_a100@yahoogroups.com Gesendet: 11:17 Freitag, 27.Oktober 2017 Betreff: AW: [Doepfer_a100] Question regarding the CV bus Hello Roland
2017-10-27 by yahoo@doepfer.de
Hello Roland, I took a look at the A-110-4 circuit and have to correct my last statement. The bus CV concept of the A-110-4 is also version 1. I wrote that only A-110-1 uses version 1. That was wrong, also A-110-4 uses version 1. I have to agree that the bus CV concept of the sev
2017-10-27 by Neil Kagan
I am, will try this out later! Sent from my iPhone > On 26 Oct 2017, at 21:17, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] wrote: > > Oh! I didn't catch that the last part was about JP2! I don't have a 110-4 so was just going by what had been said so far in this thread. > >
2017-10-26 by Nicholas Keller
Oh! I didn't catch that the last part was about JP2! I don't have a 110-4 so was just going by what had been said so far in this thread. Neil, are you still following this? > On Oct 26, 2017, at 3:09 PM, Marlene Gutsch marlene.gutsch@yahoo.de [Doepfer_a100] wrote: > > hi > it onl
2017-10-26 by Marlene Gutsch
hi it only works with the A-110-4. as written , i have two of them. i use them in many patches. it works, really ;-) the BUS CV jumper 3 is for the connection to the bus, AND jumper 2 is for adding/interrupting the 1V/Oct socket cv to the bus cv. when jumper 2 is installed, cv ap
2017-10-26 by Nicholas Keller
Roland (?), Your report doesn't make sense to me. According to Dieter and the text that you quoted, it can't work both ways. > On Oct 26, 2017, at 12:11 PM, Marlene Gutsch marlene.gutsch@yahoo.de [Doepfer_a100] wrote: > > hi > hope i understand the issue. > > the A-110-4 can "nor
2017-10-26 by Marlene Gutsch
hihope i understand the issue. the A-110-4 can "normalizing". i use the cv-gate bus in all cases. i have two A-110-4, a A-110-2 and a A-143-4 on a A-185-2.e.g. when sending a sequence to this A-185-2, send the cv from front socket to a A-156 and back to the 1V/Oct front socket of
2017-10-25 by james.husted@mac.com
I have to say the second method is nice when those times come up when adding CVs is what you want but really is not a good solution for when you don’t want to do that. It means you have to pull the module out to turn it OFF instead of the much simpler act of inserting a jack. I’m
2017-10-25 by Neil Kagan
Thanks Dieter! Sent from my iPhone > On 25 Oct 2017, at 12:16, yahoo@doepfer.de [Doepfer_a100] wrote: > > There are two versions how a VCO may optionally access the bus: > > Version 1. The CV coming from the bus is wired to the switching contact of > the socket at the front panel
2017-10-25 by yahoo@doepfer.de
There are two versions how a VCO may optionally access the bus: Version 1. The CV coming from the bus is wired to the switching contact of the socket at the front panel (provided that the corresponding jumper is installed). In this case inserting a plug into the socket at the fro
2017-10-25 by Neil Kagan
Hi to you all, for some reason I had it in my head that all of the A-100 VCOs had their 1v/o input jacks normalled to the CV bus (once the correct jumpers are set) but I have just discovered that this is not the case. My setup is as follows: A-1852 Precision Adder CV bus A-111-1
2017-10-23 by Neil Kagan
Thanks again Dieter! Neil Sent from my iPhone > On 23 Oct 2017, at 13:48, yahoo@doepfer.de [Doepfer_a100] wrote: > > I'm sorry - no. The A-190-5 is polyphonic USB/Midi-to-CV/Gate interface to > convert note on/off messages on one or more Midi channels into CV and Gate > signals.
2017-10-23 by yahoo@doepfer.de
I'm sorry - no. The A-190-5 is polyphonic USB/Midi-to-CV/Gate interface to convert note on/off messages on one or more Midi channels into CV and Gate signals. For the conversion of Midi clock I'd recommend the A-190-8 as it offers the most possibilities. Maybe one of the gate out
2017-10-23 by Neil Kagan
Thanks for responding so quickly Dieter, one final question: Is there any way to transmit midi clock via the 190-5? Neil Sent from my iPhone > On 23 Oct 2017, at 12:24, yahoo@doepfer.de [Doepfer_a100] wrote: > > Hello Neil, > > the A-190-5 will not have a higher resolution. But I
2017-10-23 by yahoo@doepfer.de
Hello Neil, the A-190-5 will not have a higher resolution. But I'm not sure if it's indeed a problem of the CV resolution. 12 bit should be more than enough because the midi data for monophonic after touch are 7 bit only. I suppose that it's a problem with the data rate (i.e. how
2017-10-23 by Neil Kagan
Hi Dieter, Can I ask if the A-190-5 midi to cv resolution will be higher than the 190-4? I only ask as I do notice that this ‘stepping’ is noticeable when controlled from software or keyboards with say aftertouch. Regards, Neil Sent from my iPhone
2017-10-16 by yahoo@doepfer.de
> Greetings everyone. > > Long time A-112 lover here, looking to make it fit in a case with > depth of 50-60mm or less. Has anyone considered or successfully > modified their A-112 to fit within one of these cases? If so, > any lessons learned you're able to share, or general tip
2017-10-16 by Ville Oikarinen
I found another option: https://waldorfmusic.com/en/kb37 If you only need Midi CC->CV, it's not cheap, but it not only transforms 3 user-defined CCs into CV, it's also a MIDI+CV keyboard, modular rack, headphone amp etc. - Ville Oikarinen
2017-10-14 by brandon zeeb
Greetings everyone. Long time A-112 lover here, looking to make it fit in a case with depth of 50-60mm or less. Has anyone considered or successfully modified their A-112 to fit within one of these cases? If so, any lessons learned you're able to share, or general tips for doing
2017-09-24 by a11@live.nl
Very good insight, Florian. I'll try that. But only one is limited than to equivalent VC with its own effect. Thank you, Ben
2017-09-24 by florian anwander
Hi Am 24.09.2017 um 02:20 schrieb a11@live.nl [Doepfer_a100]: > But it is about the sound coming out of the distorting filter. > It is this sound that I want to V/Oct [not digitally], because the sound > changes when its pitch changes. The sound only changes, because the filter i
2017-09-24 by a11@live.nl
Sure, it is not about the VCO and its tracking itself. But it is about t he sound coming out of the distorting filter . It is this sound that I want to V/Oct [not digitally], because the sound changes when its pitch changes.
2017-09-23 by Florian Anwander
This video example doesn't have to do anything with the VCO and its tracking. It is about how the distorting filter reacts on the VCO. On 23.09.17 23:58 , a11@live.nl [Doepfer_a100] wrote: Thank you for your reply, Florian. The reason I ask this is, that sometimes when you VC tun
2017-09-23 by a11@live.nl
Thank you for your reply, Florian. The reason I ask this is, that sometimes when you VC tune/pitch-V/Oct a VCO, the sound changes, so you can not play a decent melody. You can notice it here in this video - not so clearly - from 6.16 and at 7.06 minute. If the signal was distorte
2017-09-23 by Florian Anwander
Hi It is basically possible, with a VC pitchshifter. The A-187 unfortunately does not allow to suppress the original signal, so it won't work. But I am sure there are other pitchshifters in the eurorack world, which work with FX-only. My trusted old MXR Pitchshifter has a CV inpu
2017-09-22 by a11@live.nl
Hi Dieter, maybe a weird question, but I was wondering if it is possible to tune/pitch a monophonic analog audio signal with CV; just like you can do with a VCO. That would be marvelous!
2017-09-22 by Diego Ragnini
Ville, I think you're right and hope ES is not too expensive, I admit to have replied without verify anything about costs, I simply remembered that there are different modules though likely are needed to make the inverse process (from mod sys to the DAW recorder) or probably also
2017-09-22 by istari lasterfahrer
really looking forward to the frequency shifter! \o/ Am 22.09.17 um 12:26 schrieb yahoo@doepfer.de [Doepfer_a100]: >> I asked the same thing a while back. It's in the pipeline but not >> at the top of the list. We will have to be patient I'm afraid. >> >> >> Neil > Exactly. We ha
2017-09-22 by Diego Ragnini
LOL ! No I don’t tell you :-) But here Ville was asking for cheap stuff I have to deepen ES systems though for live applications it would entail to take always an audio interface with multiple outs on stage… :-( Il giorno 22 set 2017, alle ore 14:57, Florian Anwander fanwander@mn
2017-09-22 by Ville Oikarinen
> > if I am not wrong believing that Expert Sleepers means money… > Don't tell me that your Doepfer system did not mean money for you :-)))) Also, it seems ES-3 isn't even terribly expensive. It's just that I'm not sure I'll be able to use it from my linux machine, with the softw
2017-09-22 by Florian Anwander
Hi Diego > if I am not wrong believing that Expert Sleepers means money… Don't tell me that your Doepfer system did not mean money for you :-)))) Florian
2017-09-22 by Ville Oikarinen
> Useful observations, didn’t know about the 7bit, thought from MIDI to CV it’s 12bit by default. Midi data is 7 bits. But certain controllers send two 7-bit bytes so their resolution is 14 bits. This means that the values cannot be changed so often, because they require more ban
2017-09-22 by Diego Ragnini
Useful observations, didn’t know about the 7bit, thought from MIDI to CV it’s 12bit by default. Then there’s no room left for both efficient and cheap tools, as demanded in the first post (if I am not wrong believing that Expert Sleepers means money…) > Il giorno 22 set 2017, all
2017-09-22 by Florian Anwander
> the transfer rate if MIDI is too slow Should read "the transfer rate of MIDI is too slow"
2017-09-22 by Ville Oikarinen
> I think that there is a reason, why the A-191 did not sell well. And > also there is a reason why for example Schneidersladen lists 76 > interface modules, but non of them is a MIDI-CC to CV interface. Mostly > the 7Bit resolution of MIDI is too coarse and the transfer rate if
2017-09-22 by Florian Anwander
Hi Am 22.09.2017 um 13:53 schrieb yahoo@doepfer.de [Doepfer_a100]: > I'm not sure if there are sufficient inquiries > to justify the "conversion" of the MTV16 into a module. I think that there is a reason, why the A-191 did not sell well. And also there is a reason why for exampl
2017-09-22 by Ville Oikarinen
> We have such a device available as a DIY product (MTV16) but not as module. Thanks, Dieter. The features look promising. Well, I was inaccurate in my request: I don't really care if it's a module or a separate device. Maybe separate is even better so it doesn't take any rack sp
2017-09-22 by Diego Ragnini
Me too once I believed this way, though frankly it seems that modular synthesis fellows usually keep themselves far away from the MIDI world… it shouldn’t be too hard to find someone available for mounting it for you. I ignored the existence of the MTV16 and might be interested i
2017-09-22 by Malte Stamm-Gadow
Hello Dieter, I think, there are many musicians like me out there, who will like a modul to convert Midi-CCs into CV and who are no diy-guys. Greetings, Malte Malte Stamm-Gadow Diekmissen 5 24159 Kiel > Am 22.09.2017 um 13:53 schrieb yahoo@doepfer.de [Doepfer_a100] : > > We have
2017-09-22 by yahoo@doepfer.de
We have such a device available as a DIY product (MTV16) but not as module. It's easy for a DIYer to mount the MTV16 board behind a front panel with 16 sockets and wire the 16 sockets to the MTV16. And the MTV16 could be powered by the +12V of the A-100 bus. I'm not sure if there
2017-09-22 by Bakis Sirros
hi, such a module existed (A191 Midi to CV), but has now been discontinued. i have it in my Doepfer system and it is very nice for the midi cc's to cv conversion and for the nice Shepard tone generation. best regards,Bakis. From: "Ville Oikarinen ville@oikarinen.org [Doepfer_a100
2017-09-22 by Ville Oikarinen
Hello. I have a module suggestion: a simple cheap module that converts multiple MIDI control change messages into multiple control voltages. AFAIK, the simple and cheap MIDI-CV converters (like A-190-4) don't support many CCs, only velocity + one controller. Only expensive conver
2017-09-22 by yahoo@doepfer.de
> I asked the same thing a while back. It's in the pipeline but not > at the top of the list. We will have to be patient I'm afraid. > > > Neil Exactly. We have currently about 10 new modules in the holding pattern. The new frequency shifter (and also the pitch-to-voltage convert
2017-09-21 by Neil Kagan
I asked the same thing a while back. It's in the pipeline but not at the top of the list. We will have to be patient I'm afraid. Neil Sent from my iPhone > On 21 Sep 2017, at 17:32, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > I would personally be very h
2017-09-21 by achtung_999
I would personally be very happy if the long new version of the A126 would see the light of day... The one that was sort of announce when the A143-9 was released. I recently had the change to play with an original A126 and boy that sounded good! Dieter any plans in the release sc
2017-09-21 by 9-0-9
Has anyone tried the A-110-4 (1st edition with no amp kit) as a source for the a-126 pitch shifter and how were the results ? On 2017-07-16 02:57, 'p. hendricks' ph@comcast.net [Doepfer_a100] wrote: On 7/14/17 2:03 PM, acgenerator@att.net [Doepfer_a100] wrote: Have you done the m