Yahoo Groups archive
Messages
Page 301 of 564 · 28179 messages matched
2007-08-20 by hardware@doepfer.de
> Hi, > > I'm building a case for some modules; and am wondering how deep it > needs to be to prevent running into something not fitting later? > > What is the deepest Doepfer module? > How far from rear of panel to end of board? > (including any connector if it sticks out past t
2007-08-20 by hardware@doepfer.de
Dear members, thank you for the poll results. The module will be manufactured with these modifications: - 3 non-inverting outputs, 1 inverting ouput at the front panel (in addition the non-inverting or the inverting output can be jumpered to the A-100 bus) - 1V default voltage (s
2007-08-20 by Silas Johansen
I don't have one, but I see them all the time on eBay.de /Silas On 8/20/07, ErnstKarel wrote: > > Does anyone have a Doepfer Pocket Dial that hasn't been getting much > use lately? > > thanks, > Ernst > > > [Non-text portions of this message have been removed]
2007-08-19 by watson
http://search.ebay.com/_W0QQsassZpip-ettaQQfrppZ50QQfsopZ1QQfsooZ1QQrdZ0 -- i warned you not to go out tonight... [Non-text portions of this message have been removed]
2007-08-19 by ErnstKarel
Does anyone have a Doepfer Pocket Dial that hasn't been getting much use lately? thanks, Ernst
2007-08-19 by randaleem
Hi, I'm building a case for some modules; and am wondering how deep it needs to be to prevent running into something not fitting later? What is the deepest Doepfer module? How far from rear of panel to end of board? (including any connector if it sticks out past the board) Next;
2007-08-19 by gabu_004
Hey ! check out this link:) http://felixinferious.blogspot.com/2007_07_01_archive.html g. --- In Doepfer_a100@yahoogroups.com, "amthewalrus" wrote: > > Anyone get the SEM filter yet? > > There haven't been any samples posted (and there aren't any on the > doepfer site). > > Any s
2007-08-19 by amthewalrus
Anyone get the SEM filter yet? There haven't been any samples posted (and there aren't any on the doepfer site). Any sound samples out there or reviews? Thanks
2007-08-17 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: What would you prefer regarding the output options of the A185-2 Precision CV Adder Module? CHOICES AND RESULTS - 2 non-inverting and 2 inverting outputs, 5 votes, 35.71% - 3 non-inverting a
2007-08-17 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: What would you prefer regarding the default voltage at the switching contacts of the sockets of the A185-2 Precision CV Adder module? Do you want a +1.00 default voltage at the switching con
2007-08-17 by hardware@doepfer.de
> I see what you are saying. > However I think I did not explain the patch fully. > I was thinking of using an A156 quantizer between the A178 and the A110. In this case indeed an A-129-3 or A-138 is recommendable. > I do not know what the behavior would be if you attenuated an >
2007-08-17 by Rafael Cohen
I see what you are saying. However I think I did not explain the patch fully. I was thinking of using an A156 quantizer between the A178 and the A110. I do not know what the behavior would be if you attenuated an already quantized voltage. Thanks, Rafael [Non-text portions of thi
2007-08-17 by Josef Mueller
I need only text like 'connections/settings' on the Modular-Planet and a wav-file. The rest (graphics and so on) I will do... Josef --- In Doepfer_a100@yahoogroups.com, "patate_le_mage" wrote: > > Why not some patches, but i don't know what to use to create the > graphics you guy
2007-08-17 by jalmari3
--- In Doepfer_a100@yahoogroups.com, "jalmari3" wrote: > > I think I understand the parameters now. Perhaps not quite yet: I didn't expect, that harmonics control would respond to negative values (negative CV applied). Resulting waveforms are interesting and apparently can't be d
2007-08-16 by Paulo R. C. Barros
http://www.youtube.com/watch?v=K_TqvO-kIkk Cheers, Paulo Add Enigmidia News: enigmidia-subscribe@yahoogrupos.com.br [Non-text portions of this message have been removed]
2007-08-16 by patate_le_mage
Why not some patches, but i don't know what to use to create the graphics you guys make on modular-planet. --- In Doepfer_a100@yahoogroups.com, "Josef Mueller" wrote: > > Your combination Bach and Doepfer sounds great! > > On the www.modular-planet.de are a few more examples of '
2007-08-16 by Josef Mueller
Your combination Bach and Doepfer sounds great! On the www.modular-planet.de are a few more examples of 'old music with new sounds'. What about some patches for the modular-planet? Josef --- In Doepfer_a100@yahoogroups.com, "patate_le_mage" wrote: > > You can find here four piece
2007-08-16 by patate_le_mage
You can find here four pieces extract from 24 preludes and fugues of J.S.Bach. The only sound source for all this is an A100-system. I've yet realise the first 12 prelude and fugue. Let me know if you have interest with this realisation. http://profile.myspace.com/index.cfm?fusea
2007-08-16 by hardware@doepfer.de
> Hi, > So lets say I have a theremin module A178 and I want the entire range > of control of the theremin to only affect one octave of pitch. > > I imagine I can do this with a A129-3 via attenuation and offset, is > that correct? Yes. But the A-129-3 is not really necessary. Ea
2007-08-16 by hardware@doepfer.de
The waveform pictures in the A-137 user's manual are idealized graphs and used only to explain the basic function of the module. In reality the clipping and folding is not hard (as shown in the pictures) but soft. Finally the audible result is important but not the scope picture.
2007-08-16 by jalmari3
Thank you. I posted earlier some comments. I think I understand the parameters now. Best regards Jari Jokinen --- In Doepfer_a100@yahoogroups.com, wrote: > > The waveform pictures in the A-137 user's manual are idealized graphs and > used only to explain the basic function of the
2007-08-16 by jalmari3
On the A-137 page there are some green/black figures demonstrating control setting effects. They seem to be real oscilloscope captures, as I was able to reproduce them with reasonable accuracy. So, my A- 137 seems to work normally. Some observations (and some might think nit-pick
2007-08-16 by Orangenbaum Muschelrauch
Hi, I have a MAQ 16-3 sequencer up for trade. I am looking for A100 (or compatible) modules. Of special interest is the 154/155 combination. I am also interested in frames/cases/power supplies. Please send me your offers off list. Tobias - http://www.acrylnimbus.de - http://www.m
2007-08-15 by rafe127
Hi, So lets say I have a theremin module A178 and I want the entire range of control of the theremin to only affect one octave of pitch. I imagine I can do this with a A129-3 via attenuation and offset, is that correct? If the output of the theremin ranges over 5 volts normally (
2007-08-15 by Tim Stinchcombe
Hi Jari, At roughly the same settings as you give, my A-137 gives a very similar trace to yours. Because of the 4 stages acting one after the other, it is quite hard to see the effect of each stage and/or controls in isolation. I suspect the diagrams in the manual are rather diag
2007-08-15 by jalmari3
"I wonder, if it would be stupid idea not to have +/-1V for every switch: Perhaps for example +/- 1, 1, 2, 2 volts would be more versatile (assuming all four switches will have offset function)." Please, comment - It might be too late already. Best regards Jari Jokinen
2007-08-15 by jalmari3
I can't duplicate the folded triangle waveforms shown in the A-137 manual (chapter 2). The shown waveforms consist of straight lines, but I get rounded waveforms. Here is an example oscilloscope view: http://www.esnips.com/doc/278f44e2-ce2a-4ff1-8f17-1f7ef5d795d7/A- 137_weirdness
2007-08-15 by Eyesaw
Sorry Folks - meant to be private email ----- Original Message ----- From: Eyesaw To: Doepfer_a100@yahoogroups.com Sent: Wednesday, August 15, 2007 10:15 AM Subject: Re: [Doepfer_a100] Re: source for shorter 1/8" 3.5mm cables? Hi Gabriel: Your modules were sent yesterday via US M
2007-08-15 by Eyesaw
Hi Gabriel: Your modules were sent yesterday via US Mail. Hope you enjoy them. I will be putting some on eBay today so search Doepfer if your interested - Thanks, Bill ----- Original Message ----- From: gabu_004 To: Doepfer_a100@yahoogroups.com Sent: Sunday, August 12, 2007 10:03
2007-08-14 by vcovcfvca
Thanks Ernst, great answer. Gives me a few applications to think about while I await delivery of my modules. I especially liked your "hazy world" description - very poetic! --- In Doepfer_a100@yahoogroups.com, "ErnstKarel" wrote: > > > In my experience they're noisy. I don't reme
2007-08-14 by cuari7
I have a near-mint Roland System 100m that I used to feed into my Doepfer/dotcom/Serge/Modcan system, and have decided to sell it. It has 2 VCO's, 2 multimode filters, 2 vca's, one LFO, 2 EG's. Also: A Doepfer PS that I bought for backup, but never used. A Roland AX-7, mint, rare
2007-08-14 by ErnstKarel
In my experience they're noisy. I don't remember it distorting the audio passing through though, and if you're dealing with loud sounds it may not matter, especially if they're in a chain before a filter or other audio-processing module, but if you were to use one on an output yo
2007-08-14 by hardware@doepfer.de
> Hi all, > > Just wondering if anyone can answer the following question: > > Can the A119 be fed with a DC source into its audio input. No. The A-119 has a AC coupled input. You have to short the capacitors C3 and C4 (the two large 100u types) to process DC signals with the inpu
2007-08-14 by hardware@doepfer.de
> Okay so I've recently acquired a nice little A-100 system and am > having a blast with the synthesis aspect. However, I am stymied by the > A-112. I just can't seem to perform a MIDI sample dump into the > module. I have read the manual many times but I seem to have a mental >
2007-08-14 by vcovcfvca
Hi Again, Another question about a module I am purchasing: Besides not having CV attenuation controls etc. and being a linear response type VCA (aimed at CV processing), can anyone explain why the 132 dual VCA is described as being suitable for "non-critical" audio processing? Do
2007-08-14 by vcovcfvca
Thanks for the reponse Deiter! I asked because I don't have the module yet, so couldn't test. I suspected that it would be AC coupled (makes sense for its intended purpose). I'm basically weighing up module options at the moment for future purchases to add to my synth. I'll proba
2007-08-14 by vcovcfvca
Hi all, Just wondering if anyone can answer the following question: Can the A119 be fed with a DC source into its audio input. Specifically, I'm wondering if you can feed an envelope signal in and then use the built-in comparator to generate a gate delay by manipulating the thres
2007-08-13 by Doug Wellington
[WARNING: Shameless self-promo] I recently received a shipment of almost 1300 patch cables in various sizes and colors. You can see more info about these cables at Larry's old web site: http://www.wiseguysynth.com/larry/cable/cable.htm I should have my new Stooge Panels website l
2007-08-13 by verstaerker
i also would be intrested in shorter cables - as well as more different colors for the cables
2007-08-13 by junglephone
Okay so I've recently acquired a nice little A-100 system and am having a blast with the synthesis aspect. However, I am stymied by the A-112. I just can't seem to perform a MIDI sample dump into the module. I have read the manual many times but I seem to have a mental block abou
2007-08-13 by jalmari3
> Of course. The switches have three positions: left (voltage is > subtracted),center (no function), right (voltage is added). > If the share of the subtracted voltages is higher than the added > voltages the result is a negative output voltage. I wonder, if it would be stupid id
2007-08-13 by jalmari3
--- In Doepfer_a100@yahoogroups.com, wrote: > Inverted gate outputs are not planned as there is no electronics > available on the module. OK > I dont't understand the function of a mute function. If you don't > want a gate simply do not operate the buttons. I was thinking the opt
2007-08-13 by David Salter
Anyone got one for a reasonable price? Rgds David David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 Get the latest news at Reuters.com This email was sent to you by Reuters, the global
2007-08-13 by hardware@doepfer.de
> Could the extra space in the new 6HP design of A-164 be used for > something? For example: miniature multiple for each gate, (or) > inverted and non-inverted gate outs, (or) mute funtion for each > switch... I will see if there is enough space to double the output sockets. Shou
2007-08-13 by hardware@doepfer.de
> This thread seems to have gone to sleep -- does this mean that nobody > knows of anyone selling pre-made short patch cables? 15 cm/ 6 inches > or even shorter would be great for the kind of clusters of utility > modules that I often end up using. > > Any tips would be much appr
2007-08-13 by hardware@doepfer.de
> > P.S. Even the Manual Gate module has been revised a bit. > > Dieter, do you think the first version was too narrow? a bit more > space a bigger buttons make it easier to use? or why that change? > > otherwise... no difference in the functions right? > > Best, > > A You find a
2007-08-13 by gabu_004
Hey there, Check up for chips for Brain on ebay, he sales cables like that and maybe you can ask him some special oders... cheers! g.
2007-08-12 by ErnstKarel
This thread seems to have gone to sleep -- does this mean that nobody knows of anyone selling pre-made short patch cables? 15 cm/ 6 inches or even shorter would be great for the kind of clusters of utility modules that I often end up using. Any tips would be much appreciated! -Er
2007-08-12 by bellenger_a
Thanks... Best, A --- In Doepfer_a100@yahoogroups.com, "ilanode" wrote: > > http://www.doepfer.de/faq/a100_faq.htm#Fuse > > > > --- In Doepfer_a100@yahoogroups.com, "bellenger_a" > wrote: > > > > I am wondering... > > > > Are the fuses for old version and new version of the suitc
2007-08-12 by ilanode
http://www.doepfer.de/faq/a100_faq.htm#Fuse --- In Doepfer_a100@yahoogroups.com, "bellenger_a" wrote: > > I am wondering... > > Are the fuses for old version and new version of the suitcase the same? > > > > Best, > > > Merci, danke... > > > Alexandre >