Yahoo Groups archive
Messages
Page 342 of 564 · 28179 messages matched
2006-09-07 by amnesia
Hi Adam They are called Eurocad panels and you should be able to track them down in most computer stores. but mine were on sale, so not sure of real price. I found the racks to be very expensive and I wanted to spend my money on more Doepfer modules Adam-V wrote: > > --- In Doepf
2006-09-06 by Adam-V
--- In Doepfer_a100@yahoogroups.com, wrote: > > Where did you get them and how do you plan on wiring it up for the psu? > In other words does Doepfer offer a ready-made psu that all you have to do > is mount inside the case? > > Thanks, > John > I, like most of us down under I ex
2006-09-06 by Robair, Gino
Hey fellow Doepferians, Has anyone tried to board a plane recently with their A-100P? I know a couple of you on the list travel with your systems, and I¹m nervous (as I wrote earlier) about getting on a plane to Europe (via London) with a suitcase full of modules. (Fortunately, m
2006-09-06 by Zoran Bosnjak
I did not notice this poll, so I did not vote. But I love the idea - I actually had Access Virus, and I loved the arpeggiator on it. Regards, Zoran >From: Doepfer_a100@yahoogroups.com Reply-To: Doepfer_a100@yahoogroups.com >To: Doepfer_a100@yahoogroups.com Subject: [Doepfer_a100]
2006-09-06 by Tommy DOG
--- In Doepfer_a100@yahoogroups.com, "michaeltritter" wrote: > > Wondering if Dieter or anyone can help with this one: > > I've had 3 G6 racks for a couple of months. None of them have been problematic until > yesterday, when one of them blew a fuse. I replaced the fuse, and ever
2006-09-06 by hardware@doepfer.de
Michael, really strange that the problems occur after a couple of months and with several systems at the same time. Here is my suggestion (I assume that your A-100 frames include PSU2 with the toroid transformer): The 500 mA value is based on the recommendation by the the manufac
2006-09-06 by michaeltritter
Wondering if Dieter or anyone can help with this one: I've had 3 G6 racks for a couple of months. None of them have been problematic until yesterday, when one of them blew a fuse. I replaced the fuse, and everything worked again, until today, when the fuse blew again. I removed m
2006-09-06 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you like Doepfer to release a VC Arpeggiator module? [This module produces a CV-sequence on its output which is derived from a chord information at its input. Corresponding Gate-Outs a
2006-09-05 by William Soraparu
Ingo, I am using the A-112 as a Wavetable Osc Mahalo (Thank You), William Soraparu Hawaii selfoscillate wrote: --- In Doepfer_a100@yahoogroups.com, "William" wrote: > > All, I've been working with the A-112 module...and not getting the > results I want. I've used the Doepfer Wave
2006-09-05 by William Soraparu
Mahalo Dieter, William Soraparu Hawaii hardware@doepfer.de wrote: William, here is a typical patch for wavetable application: keyboard CV Out -> A-112 CV In keyboard Gate Out -> A-112 Gate In ADSR Out -> A-112 Audio In/Wave CV In A-112 switch positions: upper switch: S1 or S2 mid
2006-09-05 by southsubnotsubdude
--- In Doepfer_a100@yahoogroups.com, amnesia wrote: > > Hi John > > I have just bought 2 racks at a total cost of Aussie $50 brand new, they > dont come with the power board etc, but its way cheaper, more money to > spend on more Euros > > > > > i'd like to know where you got a n
2006-09-05 by hardware@doepfer.de
John, we have both the power supply (A-100PSU2) and bus boards (A-100BUS) available as spare parts. For details please visit our website: www.doepfer.com > PRODUCTS > A-100 > A-100 Accessories and Spare Parts Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: D
2006-09-05 by hardware@doepfer.de
William, here is a typical patch for wavetable application: keyboard CV Out -> A-112 CV In keyboard Gate Out -> A-112 Gate In ADSR Out -> A-112 Audio In/Wave CV In A-112 switch positions: upper switch: S1 or S2 middle switch: Play lower switch: WAV If you want control the start p
2006-09-05 by hardware@doepfer.de
Joost, yes, we had very bad experiences with sources offered by hkinventory like counterfeit parts, no availability of the offered parts (after the money has been transfered !) and many more. We will try no more to get parts from them. Best wishes Dieter Doepfer > -----Ursprüngli
2006-09-05 by phil hendricks
On Sep 4, 2006, at 10:35 PM, wrote: > Where did you get them and how do you plan on wiring it up for > the psu? > In other words does Doepfer offer a ready-made psu that all you > have to do > is mount inside the case? yes, you need the Bus Board and the PSU: http://www.analogueh
2006-09-05 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "William" wrote: > > All, I've been working with the A-112 module...and not getting the > results I want. I've used the Doepfer Wave dump utility to load > the 'Wiard wave' File. ..That part went fine. Here is my question... > > If anyone has
2006-09-05 by inform3r@optonline.net
Where did you get them and how do you plan on wiring it up for the psu? In other words does Doepfer offer a ready-made psu that all you have to do is mount inside the case? Thanks, John On 9/4/06 8:59 PM, "amnesia" wrote: > Hi John > > I have just bought 2 racks at a total cost o
2006-09-05 by William
All, I've been working with the A-112 module...and not getting the results I want. I've used the Doepfer Wave dump utility to load the 'Wiard wave' File. ..That part went fine. Here is my question... If anyone has used this module...and felt satisfaction...then how did you config
2006-09-05 by amnesia
Hi John I have just bought 2 racks at a total cost of Aussie $50 brand new, they dont come with the power board etc, but its way cheaper, more money to spend on more Euros > >
2006-09-04 by inform3r@optonline.net
I'm a long time user of MOTM format modules but I'm psyched to say that I've recently made the jump of building a Doepfer system too! Here's my question. I've seen Subracks (euroracks) on the net for considerably much less $$ than Doepfer or AS brand. Do any list members here use
2006-09-04 by Jay
levka0 wrote: > Als, I found that > http://www.hkinventory.com/public/Home.asp > appears to report several sources. I bought a whole bunch of them for a future project awhile back. The people who have whatever inventory is left want sky-high prices for it.
2006-09-04 by levka0
> But we have not been lazy during the summer .... Nobody here has ever only thought that about you ;-) Synthfool.com appears to have some stock of CA3019 but quite expensive ($48) Als, I found that http://www.hkinventory.com/public/Home.asp appears to report several sources. How
2006-09-04 by brztdk
Hi, Wonk, an ms-50 style filter... That sounds interesting. If it's possible to pre order i'd like to be noted for 1 module. grtz Bruce --- In Doepfer_a100@yahoogroups.com, wrote: > > Joost, > > the prototype of this filter is already working. But as we have only a very > small q
2006-09-04 by Bakis Sirros
hello thomas, i had a problem with one of my 143-2's that was sold very easily. just check this: unmount the module from the rack and insert a minijack cable into one of the adsr outputs. then obnserve the module from behind the face plate. maybe the tip of the patchcord's minija
2006-09-04 by hardware@doepfer.de
Strange ! If you have a digital multimeter available I'd recommend to measure the resistance between the contact of the first gate socket and the contacts of the gate sockets #2, #3 and #4 (use the main contacts, not the switching contacts, for details please refer to the A-100 D
2006-09-04 by hardware@doepfer.de
Joost, the prototype of this filter is already working. But as we have only a very small quantity of the special diode arrays CA3019 available (~ 20 pcs only) and could not find more of these parts a production of the "A-106-2" does not make sense at the moment. But we have not b
2006-09-04 by thomasborax
hello again- i looked at the module and noticed the jumpers you indicated. the jumpers appear to me to be completely intact, connecting the circuit boards exactly as you indicate. the solder points on the board look solid. any other possbilities? as i said, each envelope works pe
2006-09-04 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you like Doepfer to release a VC Wavetable Oscillator module?(with multiple banks of wavetables and vc selection of banks)? CHOICES AND RESULTS - Yes!, 23 votes, 82.14% - maybe..., 2 v
2006-09-02 by Eyesaw
Have the following for sale: Doepfer A-100 System - Includes (2) 110 VCO, 115 Audio Divider, 116 Waveform Processor, 120 Low Pass Filter, 121 Multi-Mode Filter, 131 Expo VCA, 135 VC Mixer, (2) 138a Linear Mixer, 138b Expo Mixer, (2) 140 ADSR, 144 Morph Controller (controls VC Mix
2006-09-02 by stuadh
Please be aware that I have a MCV4 on auction on eBay with only a couple of days to run. The Auction number is :220022095649 Yours Aye Stuadh
2006-09-01 by stuadh
Hi Michael, I'm in the process of planning the build of a wooden cabinet for my synth. After several months of searching the net and taking advice from this and other fora, it seems the only way is to home-build, or commission a carpenter to build a bespoke cabinet. Like many oth
2006-09-01 by levka0
Dear Mr. Doepfer, A possible 2nd version of the A-106-1 sounds indeed quite interesting. If I remember well, you once mentioned that you might rebuild the MS-50 diode VCF. Is this still on your mind ? (of course after the work on all other new modules has been finalized). Kind re
2006-09-01 by Florian Anwander
Hi Zoran > And do not forget to increase GAIN to a value larger than 0, otherwise you > will hear only chopped sound. regards, >>Patch the output of the LFO (triangle wave) to the CV in of a VCA into >>which >>you have some audio patched. The LFO will modulate the amplitude of th
2006-09-01 by David Salter
Thanks Dieter, couldn't see for looking. Thank you again Rgds David David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 Get the latest news at Reuters.com ________________________________
2006-09-01 by thomasborax
thanks dieter- it generally works as an lfo, i haven't tre=ied that in a while, but that shouldn't be a problem. i just recall once or twice it didn't work regardless of the A or D settings (with sustain at 0). anyhow i will take out the module and check the places you mentioned.
2006-08-31 by Zoran Bosnjak
And do not forget to increase GAIN to a value larger than 0, otherwise you will hear only chopped sound. regards, Zoran >From: "unknown freak" >Reply-To: Doepfer_a100@yahoogroups.com >To: >Subject: RE: [Doepfer_a100] a-100 question >Date: Thu, 31 Aug 2006 14:09:55 -0400 > >Patch
2006-08-31 by Antonio Grazioli
See my custom cabinets on http://www.autodafe.net/doepfer/ http://www.autodafe.net/doepfer/cabinet2.htm if you need details just ask. ciao [Non-text portions of this message have been removed]
2006-08-31 by unknown freak
Patch the output of the LFO (triangle wave) to the CV in of a VCA into which you have some audio patched. The LFO will modulate the amplitude of the sound at the output of the VCA. --Chuck -----Original Message----- From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogro
2006-08-31 by james bennett
hi sorry to email you but ive lost my password and ld really appreaciate it if you could tell me how to get tremolo on the a-100 doepfer lfo on the amplitude via CV? thanks james ps could you post this on the group page ____________________________________________________________
2006-08-31 by hardware@doepfer.de
Tom, maybe the normalling wire has been interrupted when you replaced the LEDs. It's a blank wire going from the main contact of the first gate socket to the switching contacts of the three remaining gate sockets (it leads from JP2 of the first board to JP2 of the other three boa
2006-08-31 by hardware@doepfer.de
David, it's in their Mounting Profiles catalogue http://www.proma-technologie.com/englisch/rundum_l/produkte/19zoll/pdf/tprof _e1.pdf On the top right edge of page 1: Mounting Profile 1, anodized, undrilled, 1000mm long, Item no.: 125 010 1000 For the A-100 the undrilled version
2006-08-31 by David Salter
Dieter, I've just checked their PDF's and they only have part numbers for mounting profiles for lengths upto 432mm, is it possible for one of your purchasing people to provide the part number you order with? It maybe that it's a bespoke item as it's longer than a standard 19" rac
2006-08-31 by thomasborax
hi lads/lasses- i've been loving my a143-2 for quite some time. i have encountered a bug in the normalization, and i wondered if anyone else had the issue, or had a fix. i am happy to go into the ciruit itself and do a fix, if need be. here's the issue- the gate of env 1 is no lo
2006-08-31 by David Salter
Thank you Dieter that is very helpful. Rgds David David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 Get the latest news at Reuters.com ________________________________ From: Doepfer_a10
2006-08-31 by hardware@doepfer.de
David, ProMa has a representative in UK. You could order from them directly: Unimatic Engineers Ltd. 130 Granville Road GB London NW2 2LN Phone: 0044 (020) 8922 1000 Fax: 0044 (020) 8922 1066 E-Mail: sales@unimatic.com The order numbers can be found in the brochure that is availa
2006-08-31 by David Salter
Dieter , That sounds interesting, I could certainly use 4 of those for my new cab (maybe 6). Any idea how much to send to the UK? Many thanks David David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 07990562402
2006-08-31 by hardware@doepfer.de
Tim, excellent work - though I did not yet read and understand everything. To speak the truth the A-106-1 was designed more by trial and error without that terrific theoretical background. If the results of the second version of the MS20 filter are promising we may consider an A-
2006-08-31 by hardware@doepfer.de
Our supplier (ProMa, Germany) is able to deliver suitable rails with 1 m in length (about 15 Euro each). We need these for our A-100 monster cases. If they have to be shortened to a specific length they ask for additional 18 Euro (!!!). We could order these rails as special parts
2006-08-31 by David Salter
Yep Michaels experiences echo my own. My first DIY cab had wooden rails and it proved to be a real pain as my module collection increased and I needed to shuffle the modules around. My current cases use standard metal rails. These can be a tad tricky to install - especially as my
2006-08-31 by David Salter
Hi Tim, An interesting document, congratulations. I admit that a lot of the maths went over my head - even though I have an OND in electronics :) I'll have to get me text books out and refresh my brain. I hope you publish your findings once you've build the circuits. I'll be keen