Yahoo Groups archive
Messages
Page 401 of 564 · 28179 messages matched
2005-03-28 by davevosh@aol.com
In a message dated 3/27/2005 10:27:19 PM Eastern Standard Time, sasquatch@bentonrea.com writes: > I really like the Cyndustries modules david, some of the cyndustries stuff looks very nice - as i also have a 5 panel serge and gp6 analog computer as part of my "meta-synth" ("frank
2005-03-28 by David W. Skinner
--- In Doepfer_a100@yahoogroups.com, davevosh@a... wrote: > In a message dated 3/27/2005 1:10:49 AM Eastern Standard Time, > sasquatch@b... writes: > > > > > > A-110 VCO > > A-113 Subharmonic Generator > > A-114 Dual Ringmodulator > > A-180 Multiples > > A-135 VC-Mixer > > A-144
2005-03-28 by David W. Skinner
--- In Doepfer_a100@yahoogroups.com, "synthtrader" wrote: > > hello, > > > I have ordered a Model 15 VCO from Peter Grenader. So now I'm > > planning a small Doepfer system so it will have a home. > > > > My other modulars are Synthesizers.com and Modcan/Cynthia. > > So, I tried
2005-03-27 by shm1400
That sure is a lot more convenient and neater than whipping out the old jig saw, which is what I was doing before. Lucky thing those inlets have a good sized flange for concealing some of my raggedy cuts. One thing that is really useful if you have more than one suitcase is to ha
2005-03-27 by Bakis Sirros
hello shawn, :-) hey, steve roach uses a doepfer a100? that's great! i'm big fan of his music! does he has in the portable cabinets also AS modules or only a100 modules? i see many modules with black knobs. are these rs-integrator modules? please give me info, as i want to update
2005-03-27 by synthtrader
hello! Although I have not had time to add it to my site yet I have uploaded the text version (Real Text File) to our FTP. If anyone can't open the file and wants me to paste it in an email let me know. This is an interview that I arranged with Joel Peterson of the Faint by F.A.S
2005-03-27 by synthtrader
hello, First I should correct something I said in my last post: > Obviously I meant around 7 inches deep without the cover or 9 inches *with* the cover on and it has been awhile since I measured but I think this is accurate, someone feel free to correct me. Now onto your question
2005-03-27 by davevosh@aol.com
In a message dated 3/27/2005 1:10:49 AM Eastern Standard Time, sasquatch@bentonrea.com writes: > > A-110 VCO > A-113 Subharmonic Generator > A-114 Dual Ringmodulator > A-180 Multiples > A-135 VC-Mixer > A-144 Morphing Controller > A-107 Multitype Morphing Filter (w/VCA) > A-143-2
2005-03-27 by synthtrader
hello, > I have ordered a Model 15 VCO from Peter Grenader. So now I'm > planning a small Doepfer system so it will have a home. > > My other modulars are Synthesizers.com and Modcan/Cynthia. > So, I tried to put together something a different as possible with > the Doepfer. I'm
2005-03-27 by synthtrader
hello, > Sorry about that :( Here is a pic: http://www.analoguehaven.com/newback.jpg No price difference between the two A-100P suitcases. Keep in mind that although the power switch is on the back, its in the center and not off to a side. That means if you stack your modular aga
2005-03-27 by David W. Skinner
Hi, I have ordered a Model 15 VCO from Peter Grenader. So now I'm planning a small Doepfer system so it will have a home. My other modulars are Synthesizers.com and Modcan/Cynthia. So, I tried to put together something a different as possible with the Doepfer. Here is what I've c
2005-03-26 by sfrules
Hi ho, I was advised by Analogue Haven that Doepfer was offering the power module mounted in the back starting in March, 2005. Just after I took delivery of my suitcase... Rats! http://www.abiotic.net/schism/doepfer.html I don't know where you are, but I suspect it would be even
2005-03-26 by Bakis Sirros
hello list, in the photos section, in the folder "Parallel Worlds" you will find updated pics of my studio gear, plus details of modified gear. also, notice that in the group home page the a100 picture is updated too. enjoy. best regards, bakis. Bakis Siros Parallel Worlds / Pola
2005-03-26 by shm1400
I've actually got the power in the back of all three of my suitcases. But I did this myself. I didn't know you could buy them this way. Where can I find info on these suitcases? SHM --- In Doepfer_a100@yahoogroups.com, sfrules wrote: > > > Hello, > > Have you considered getting o
2005-03-26 by Robair, Gino
"thomasborax" wrote: > That's true. I could just lay the thing on the desktop or the top of the case, because it's pretty small. Excellent suggestion.
2005-03-26 by Robair, Gino
SF Rules wrote: > That's the case I have! :-) I just need four more HP of space.
2005-03-25 by Robair, Gino
Okay, so I was planning my suggestion of drilling into the case and mounting the Mult panel, but wasn't in front of the synth while thinking about it. Now that I've sat in front of the case and felt how thick the black strips above the modules are, I'm wondering if mounting the M
2005-03-25 by mritenburg
> what i want to know is, how slow can you get the random voltage > generator in the colored noise module? it would be much more > useful to me if it were slowed down quite a bit. the colored noise module goes super slow if you like, and, you can always pump it though the slew li
2005-03-25 by thomasborax
hi-\ been meaning to ask the group on this topic for some time. i'm curious about the colored noise/random voltge module and the digital noise module. i only have room for one however. so perhaps you can help along this decision. what i want to know is, how slow can you get the r
2005-03-25 by thomasborax
hi- you could just float the thing. it's so light that it would probably be held aloft by all the wires you have in it. that is if you've already bought one. if not i'd say buy jacks from mouser or all electronics.com and make a little multiple box to sit on or near your synth. y
2005-03-25 by sfrules
Hello, Have you considered getting one of the new suitcases with the power on the back? It gives you an extra 8HP! sfrules
2005-03-25 by shm1400
I have also been wanting to make use of this extra space for mults. But, it doesn't seem like the back of those plates are flat enough to just drill and mount jacks or anything else on them. (I'd be happy to be proven wrong if somebody else is willing to experiment by taking a dr
2005-03-25 by Julian
Rather then mounting an a-180 module, why not just buy a set of jacks and wire them together. If you spend time thining about the placement, measuring them all out, and drill carefully itll look equally as good as a plain case with all that extra function. The jacks are made by c
2005-03-24 by Tom Butcher
Oops, below I mean PSU2. The high current version. > > > I wonder if others on the list have successfully used a PSU > in a frame. I've put one in my A100 6sp, and now there's a > terrible ground loop whenever the A100 is plugged in. I'm > no EE but I can trace connections and su
2005-03-24 by Tom Butcher
I wonder if others on the list have successfully used a PSU in a frame. I've put one in my A100 6sp, and now there's a terrible ground loop whenever the A100 is plugged in. I'm no EE but I can trace connections and such. What should I look for in trying to track this down? It's s
2005-03-24 by mritenburg
> Thanks for any suggestions. See y'all in Frankfurt. > Hi Gino, Depending on how you feel about drilling your face plates, a couple of modules have some spare realestate that could possibly accomodate the A180 board and jacks. The A155 has room to spare. Also, two or so of the l
2005-03-24 by tkrakowiak
> PS: if you're using the Lowpass Gate and pushing the resonance up, turn > down your speakers: I just about blew up my monitors last night by pushing > the gain to the extreme and then raising the res. lovely idea, i'm definately trying out this one, thanks Gino (i'd like to hea
2005-03-24 by Robair, Gino
Hey folks, I have run out of room in my rack but I really, really want to use the A-180 Mult that I still have (I'm ony 2-HP short of space in my suitcase for the thing). So, I had this wacky idea: mount it on the black strip that is above or below the modules themselves. Has any
2005-03-24 by mritenburg
> Sequencers won't have the possibility of delaying realtime > modulation (e.g. Pitchbend). I must have missed that in the initial criteria. Still, it could be done with a gate delay and an EG and maybe a slew limiter to soften up the envelope - depending on how you use the pitch
2005-03-24 by Florian Anwander
Hi Matthew > What you want to do is use two sequencers with quantizers and delay > the gate that increments one of the sequencers. Sequencers won't have the possibility of delaying realtime modulation (e.g. Pitchbend). If you reduce the application to straight note CVs, then the
2005-03-24 by mritenburg
P.S. The A-162 Trigger delay will help you achieve the desired result. That is, if you have two sequencers and a quantizer. Matthew
2005-03-24 by mritenburg
What you want to do is use two sequencers with quantizers and delay the gate that increments one of the sequencers. With the quantizer you ensure that the voltages will be identical and with the gate delay you can precisely control when the next voltage happens. Use a voltage con
2005-03-24 by Zoran Bosnjak
In order to repeat the voltage at desired time, you have to store it somewhere. So it's two sample and hold modules, either using the original trigger, or modified trigger (with unexpected results of course, rather than arabesque effect). If original poster wants arabesque effect
2005-03-24 by Dieter Doepfer
> the musikmesse is opened to public on saturday 09th of april. > there is a shop in frankfurt which sells doepfer stuff, > it is "musik-schmidt". they also have an internet presence, > just use your favorite search engine and try > "musik schmidt frankfurt". i don't know if you
2005-03-24 by Florian Anwander
Hi levka0 > Noticed that it is planned as a 24/24db hp/lp design. [...] > Was there a technical reason to choose for 24 db in this case ? I am not inside Doepfer, but I assume, it is the Filterchip. (CEM3320) Florian
2005-03-24 by Florian Anwander
Hi Mickey > Dumb question.. What is a simple way to delay a control voltage? say I have a CV coming > in from a source (analog sequencer) and it feeds to an OSC, and I wish to delay the same > CV and feed it to another OSC.. Any idea>>? There is no simple way. A slewlimiter give
2005-03-24 by selfoscillate
hello joost, i've spoken with dieter doepfer about this module several months ago. afaik this module is in a very early planning stage and no decisions about the design have been made yet. the module will probably use cem-filters, because they have the best tracking. good trackin
2005-03-24 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "Mickey Finn" wrote: > > Dumb question.. What is a simple way to delay a control voltage? say I have a CV coming > in from a source (analog sequencer) and it feeds to an OSC, and I wish to delay the same > CV and feed it to another OSC.. Any i
2005-03-24 by levka0
I was just looking at the prelim page for the A-1?? Dual balanced VCF Noticed that it is planned as a 24/24db hp/lp design. Although I am really interested in the features of this filter, I myself find generally find 12 db filters to be more to my own taste, especially for hpf. W
2005-03-24 by Mickey Finn
Dumb question.. What is a simple way to delay a control voltage? say I have a CV coming in from a source (analog sequencer) and it feeds to an OSC, and I wish to delay the same CV and feed it to another OSC.. Any idea>>? COleman.
2005-03-24 by coyoteous
Cool, I'll probably just call them - thanks for the tip! Barry --- In Doepfer_a100@yahoogroups.com, "Paul Wagorn" wrote: > I never did find a description of the product on their site, but they do > have it. I'll get the model # & post it. > > > > paul > > > > _____ > > From: coyo
2005-03-23 by boward_k
How much do you want for the standard VCO & ADSR envelope??
2005-03-23 by levka0
What's wrong with the A-155 ? Real good value for money IMO The Analogue solutions SQ-8 is probably the least expensive seq, but the A-155 beats it in price/performance ratio For me the A-156 is a quite essential complement for any analog seq. Or get a Roland CSQ-100/600 s/h if y
2005-03-23 by electro
18 modules on ebay for 550,- here the link: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=7309611781
2005-03-23 by nutrafx
> I use a Roland SH-101 as keyboard and sequencer. i also heavily use an sh-101 with doepfer. it's my favorite keyboard controller and great for sequencing basslines and stuff to a clock. i love the simplicity of playing in patterns and like the fact that you can't save or edit t
2005-03-23 by Florian Anwander
Hi danv_83 > what are some good cv sequencers that interface well with the a100 > series? i am looking for something that is able to be synced to cv > pulse from a square wave lfo. something not too expensice would be great. Look out for a Roland used CSQ100 or (better) CSQ600. I
2005-03-23 by Paul Wagorn
I never did find a description of the product on their site, but they do have it. I'll get the model # & post it. paul _____ From: coyoteous [mailto:antithesist@mail.com] Sent: Tuesday, March 22, 2005 9:17 PM To: Doepfer_a100@yahoogroups.com Subject: [Doepfer_a100] Re: I found so
2005-03-23 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "danv_83" wrote: > > what are some good cv sequencers that interface well with the a100 > series? i am looking for something that is able to be synced to cv > pulse from a square wave lfo. something not too expensice would be great. > > thanks
2005-03-23 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "boward_k" wrote: > > What days are the "public"...("civilians")...allowed into the > musikmesse? And were would the cheapest place in Frankfurt be to buy > doepfer's...Dieter?? hello boward, the musikmesse is opened to public on saturday 09th
2005-03-23 by coyoteous
Paul, I can't find anything near that price and spec. on their website. Can you give a direct link? Barry --- In Doepfer_a100@yahoogroups.com, "Paul Wagorn" wrote: > > www.Hybridcases.com sells a 12-space rack case with front and back covers, > metal edges, metal corners, recesse