Yahoo Groups archive
Messages
Page 423 of 564 · 28179 messages matched
2004-10-09 by Bakis Sirros
yes, you should post these clips to the analogue systems yahoo group. after all,it's their module! bakis. --- levka0 wrote: > > Hi Pierre > If you like, I can email you some RS500e MP3s > I am somewhat reluctant to post them here, since > it's a little OT > > Regards > Joost > >
2004-10-09 by Bakis Sirros
hello pierre, i have ther AS comb filtrer module but i don't use it very often. i wouldn't say that i like it very much. but, i use more often the AS rs500e ems diode filter. regardles of that, i think that you should buy in the future, the a108, a107 and a106 filters. all these
2004-10-09 by Pierre Zeeman
Ingo (and anyone else interested in such things), >i have both the rs120 comb filter and the rs500e ems filter. >the comb filter cannot be compared with lowpass filters really, >because it is a bbd-based design and works more like a flanger. I wasn't thinking of it as a straight
2004-10-09 by levka0
Hi Pierre If you like, I can email you some RS500e MP3s I am somewhat reluctant to post them here, since it's a little OT Regards Joost --- In Doepfer_a100@yahoogroups.com, "Pierre Zeeman" wrote: > Ingo (and anyone else interested in such things), > > >i have both the rs120 comb
2004-10-08 by Bakis Sirros
hello shawn, i saw your new site and it is great! well done! i really wish you good luck with the distribution of the doepfer items adn the a100, of course! also, many thanks for the link to the a100 yahoo group! best regards, bakis. --- Modular Fan wrote: > hello, > > I wrote th
2004-10-08 by Modular Fan
hello, I wrote this message for both the AH list and Doepfer A-100 list so sorry about any duplicates in your mailbox. With that said... As has been noted earlier I am currently handling the distribution of Doepfer through my store, located online at www.analoguehaven.com Unfortu
2004-10-08 by Bakis Sirros
hello list, has anyone noticed the new user examples that are now on the a152 pdf manual and in the a152 webpage? by reading these examples, you can understand how many amazing possibilities the a152 can give you. really impressive! bakis. ===== Bakis Siros Parallel Worlds / Pola
2004-10-08 by Pierre Zeeman
When my doepfer grows up it wants to be like Bakis' hehehehe p.s. does anyone on this list have the analogue systems ems filter? I have an AS system 1 but, to be honest, I've never liked the moog lpf very much and I am thinking of replacing it. There are a few other possibilities
2004-10-08 by selfoscillate
hello pierre, i have both the rs120 comb filter and the rs500e ems filter. the comb filter cannot be compared with lowpass filters really, because it is a bbd-based design and works more like a flanger. the rs500e is a nice sounding filter and more suitable to replace your rs100
2004-10-08 by selfoscillate
hello joost, --- In Doepfer_a100@yahoogroups.com, "levka0" wrote: > > Hi All > I realize this is a little OT but I did not know where to post > otherwise: > > I just purchased an MCV 24 to complement my A-100. > > I managed to get an oct/V CV, although it appears a few octaves to
2004-10-07 by levka0
Hi All I realize this is a little OT but I did not know where to post otherwise: I just purchased an MCV 24 to complement my A-100. I managed to get an oct/V CV, although it appears a few octaves too high from the midi note that I play. After reading both German & Enlish manuals
2004-10-07 by bdu@fdiskc.com
Also, I think it would be a good idea to release the V/oct->Hz/V converter in standalone box with powersupply format (a-la doepfer's dinsync converters), possibly with a couple of v-trig to s-trig converters on board, people with old hz/v synths pay $300 for the ms-02 when they c
2004-10-07 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] Re: MAQ 16/3 or > A-154/5/6? > Date: Thu, 7 Oct 2004 16:44:36 +0200 > > > the only thing which is a bit sad about the a155's > is > > that the max voltage range is only 4 volts.
2004-10-07 by levka0
Hi, same here ! Couldn't we have a poll on this ? best regards from Amsterdam, Joost > .......... > i'd prefer separate modules instead of one module with all > the functions. > > best wishes > ingo
2004-10-07 by timothy adams
Sounds like you need to have a touch screen on the front of this unit that has a menu select on it. Maybe this needs to be three separate units instead for more dedicated functions. Isnt there a module like this already out there!? Where code is fed from a pc to the module? Why r
2004-10-07 by James Husted
I agree that separate module frontpanels dedicated to the different functions would be a better idea. That way the main "guts" of the module can be made in quantities that would reduce cost. An option of a "universal" module panel with a midi or such programmable input could be a
2004-10-07 by Zoran Bosnjak
Thanks Ingo! I listened these samples religiously several times. You gave me the answer I needed so much. I want this module! Regards and thank you again, Zoran >From: "selfoscillate" >Reply-To: Doepfer_a100@yahoogroups.com >To: Doepfer_a100@yahoogroups.com >Subject: [Doepfer_a10
2004-10-07 by selfoscillate
hello bakis, thanks for the measurement :-) best wishes ingo --- In Doepfer_a100@yahoogroups.com, "synth_freak_2000" wrote: > > hello ingo, > i measured the a155 bottom row output voltage with the a197 vu- meter > in the "direct measurement" mode: it is about 6,5 volts. > but, if
2004-10-07 by synth_freak_2000
hello ingo, i measured the a155 bottom row output voltage with the a197 vu-meter in the "direct measurement" mode: it is about 6,5 volts. but, if you pass this a155 bottom row voltage thru the a133 vc polarizer you can make it have a range from 0 to 10 volts! i tested that too. b
2004-10-07 by Bakis Sirros
hello ingo, many thanks for the samples and especially for your very useful info about the different vactrol tolerances/behaviour in combination to the resonance setting of the a101-2 lpg! bakis. --- selfoscillate wrote: > > > hello all, > > zoran requested more examples of the a
2004-10-07 by Bakis Sirros
hello again, the analogue solutions concussor is only 6U(almost all of the drum modules, sy01, speech synth module, mixer, VU01, midi to trigger module) and it is the same for almost two years now. it will not be expanded further as far as i know. the analogue systems integrator
2004-10-07 by Bakis Sirros
hello ingo, nop, AFAIK, the max voltage out is about 7 volts, if you use the bottom (not scaled) analog row. bakis. --- selfoscillate wrote: > > --- In Doepfer_a100@yahoogroups.com, "klstay" > wrote: > > > > I am trying to decide between a MAQ 16/3 or an > A-154, A-155, and A- >
2004-10-07 by Bakis Sirros
hello kevin, if you intend to build a modular synth,the a154,55,56 is the BEST!the answer is simple/:so many patchpoints give countless creative capabilities. on the other hand:if you want an analogue sequencer for your analogue AND MIDI synths and for easy live use then choose t
2004-10-07 by selfoscillate
hello bakis, oh really? i always thought that the bottom row has 4 volts too, just like the upper row. i'll have to check that on my a155's. thanks for telling me :-) best wishes ingo --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > hello ingo, > nop, AFAIK, the max vol
2004-10-07 by selfoscillate
hello all, zoran requested more examples of the a101/2. i couldn't resist to do some additional snaps to make comparison of the modes easier, but i only made examples with sawtooth waves. i have to admit that i've overlooked the request for square wave examples, but i think that
2004-10-07 by selfoscillate
no photos of your analogue systems and analogue solutions modulars? best wishes ingo --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > hello list, > i have uploaded in the photos section(parallel worlds > folder) some new and very detailed photos of my studio > gear, inc
2004-10-07 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "klstay" wrote: > > I am trying to decide between a MAQ 16/3 or an A-154, A-155, and A- > 156. (Eventually a second A-155) Space is not a constraint and I > would not mind routing the cables from the rear of the MAQ to a > drilled out blank pa
2004-10-07 by selfoscillate
> indeed! the a100 monster is so big that sometimes i'm > afraid that the monster will eat me! :-)) yum yum munch munch :-)
2004-10-07 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > DIETER: "it has an analog-to-digital converter (ADC) > followed by a microprocessor that processes the data > coming from the ADC and outputs the result to a > digital-to-analog converter (DAC). Examples are: bit > crunch
2004-10-07 by klstay
I am trying to decide between a MAQ 16/3 or an A-154, A-155, and A- 156. (Eventually a second A-155) Space is not a constraint and I would not mind routing the cables from the rear of the MAQ to a drilled out blank panel. The cost differential is also not a factor. Given that, wh
2004-10-06 by Bakis Sirros
--- unknown freak wrote: > Wow, Bakis, that's an unbelievable analog shrine. I > had no idea you > also had the Technosaurus and entire wallful of > Korg. Your Doepfer is > totally out of control. ;) indeed! the a100 monster is so big that sometimes i'm afraid that the monster wi
2004-10-06 by Bakis Sirros
DIETER: "it has an analog-to-digital converter (ADC) followed by a microprocessor that processes the data coming from the ADC and outputs the result to a digital-to-analog converter (DAC). Examples are: bit cruncher, bit exchanger, delay, V/Oct-to-Hz/V converter or more general a
2004-10-06 by unknown freak
Wow, Bakis, that's an unbelievable analog shrine. I had no idea you also had the Technosaurus and entire wallful of Korg. Your Doepfer is totally out of control. ;) What a studio. --Chuck > -----Original Message----- > From: Bakis Sirros [mailto:synth_freak_2000@yahoo.com] > Sent
2004-10-06 by Bakis Sirros
hello list, i have uploaded in the photos section(parallel worlds folder) some new and very detailed photos of my studio gear, including the A100 monster(239 modules so far), of course! enjoy! also, all members are welcome to upload their studio photos including their A100. as, t
2004-10-06 by Zoran Bosnjak
Hi Ingo, I am interested in lp+vca mode, controlled by short envelope. Sequence can be any random notes starting as bass, and going up 2-3 octaves. Actually, just like 303, but no resonance. So only one oscillator. Thank you in advance - your help is just unbelievable. Regards, Z
2004-10-06 by Bakis Sirros
hello list, in the first production batch of the a107, the a107 module had two resistors(R88,R86) with a different value than the final and current production batch. these two resistors(one of them in the vcf and the other in the vca section,i think) resulted in a low-level outpu
2004-10-06 by synth_freak_2000
hello list, just want to report that, yesterday, i received my first a101-3 modular vactrol phaser.i can confirm that it sounds great! it has SO MANY capabilities that you can explore this module for ages! and it also can function as a very complex filter of course! of special in
2004-10-06 by selfoscillate
hello zoran, yes, this is possible. do you want all the modes (lp, vca, lp+vca) or is only one specific mode of interest for you? do you want the a101/2 to be controlled by an envelope, lfo or is a simple manual sweep better? and no, you are not boring me with example requests :-
2004-10-05 by (i think you can figure that out)
Got my A-198 Ribbon controller today. We just finished messing around together for the first time. I'm smoking a cigarette. THIS THING ROCKS!!!!!! Run to the bank, sell something if you have to, just don't steal - but do anything you need to get one of these. It's amazing. Listen
2004-10-05 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] MAQ 16/3 mods > Date: Tue, 5 Oct 2004 17:09:22 +0200 > > > -----Urspr'ngliche Nachricht----- > > Von: Robert Hoffman [mailto:robmix@earthlink.net] > > Gesendet: Montag, 4. Oktobe
2004-10-05 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you like Doepfer to release a VC Analogue PITCH SHIFTER MODULE? CHOICES AND RESULTS - yes!, 32 votes, 68.09% - maybe, 7 votes, 14.89% - no., 8 votes, 17.02% For more information about
2004-10-05 by Zoran Bosnjak
Hi Ingo, is it possible to do a tiny, quick demo of A101/2 with saw and square, instead of a drum loop? I promise not to bore you with filter requests anymore :-) Regards Zoran >From: "selfoscillate" >Reply-To: Doepfer_a100@yahoogroups.com >To: Doepfer_a100@yahoogroups.com >Subje
2004-10-05 by peter sedin
--- Robert Hoffman wrote: > Anyone modded their MAQ to have the CV/Gate > connections on the front > panel ? I'll pop the hood today to see if there's > room but I thought I > ask here as well. > > Rob > > no.. but that would be cool.. __________________________________ Do you Ya
2004-10-04 by Robert Hoffman
I thought about that, there's great pic in the photos section on yahoo, but rack space is at a premium in my studio. Rob On Monday, October 4, 2004, at 03:34 PM, Loren Nerell wrote: > > > An alternative to this without having to modify the MAQ is to buy a one > space blank plate,
2004-10-04 by Loren Nerell
At 11:47 AM 10/4/2004, you wrote: >Anyone modded their MAQ to have the CV/Gate connections on the front >panel ? I'll pop the hood today to see if there's room but I thought I >ask here as well. An alternative to this without having to modify the MAQ is to buy a one space blank p
2004-10-04 by Robert Hoffman
Anyone modded their MAQ to have the CV/Gate connections on the front panel ? I'll pop the hood today to see if there's room but I thought I ask here as well. Rob
2004-10-04 by Bakis Sirros
hello florian, ingo and all, on second thought, maybe you're right. the parallel connection should be the default. bakis. --- Florian Anwander wrote: > Hi > > I prefer the way the web page mentions; daisy > chaining is the special > usage, parallel should be the default. > > Flor
2004-10-04 by (i think you can figure that out)
A dedicated Plan B yahoogroup has been created so that delivery status, photos, proposed module development dieads and user comments can be posted without interfering with the A-100 list. Go here: http://groups.yahoo.com/group/PLAN_B_analog_blog This site has a current status upd
2004-10-04 by Florian Anwander
Hi I prefer the way the web page mentions; daisy chaining is the special usage, parallel should be the default. Florian Bakis Sirros wrote: >>----- Original Message ----- >>From: Dieter Doepfer >>To: Bakis Sirros >>Sent: Friday, October 01, 2004 4:40 PM >>Subject: AW: question ab
2004-10-04 by David Salter
Peter, Looking forward to it. david David Salter Reuters Ltd UKI Project Management Tel. +44 207 542 2402 Fax. +44 207 542 2699 Email. david.salter@reuters.com Reuters Messaging. david.salter.reuters.com@reuters.net _____ From: (i think you can figure that out) [mailto:peter@buzz