disk formats
2004-08-23 by miles_philip
well i admit i havent exactly tried the highest quality disks, but my VFXSD (not the SD1) formatted them ok, so did my PC, but geiblers wouldnt have it. if i
Messages
Browse messages
Page 65 of 90 · 4465 messages matched
Re: [Ensoniq-VFX-SD] Re: freedos
2004-08-23 by Ralph Stokes
... I find most expensive, or well known brands, work. Normally, if they format for SD1, then I usually have no more problems with them. If they don t format,
Editor for SD1
2004-08-23 by teomi
Anyone knows of an patch Editor for the SD1? Thanks,
Re: [Ensoniq-VFX-SD] cant load OS onto floppy
2004-08-22 by Jonas Håkansson
Hey! Send the guy a floppy by snail mail!!! Regards Jonas. ... From: miles_philip To: Sent:
Re: freedos
2004-08-22 by miles_philip
i have thought of that, 720kb disks are not easy to come by these days though. ill keep my eyes and ears open cheers ... to try with an old Double Density disc
Re: [Ensoniq-VFX-SD] freedos
2004-08-22 by Fabio D. García
Hi Miles, Manytimes High Density disc don t work in right way. You would need to try with an old Double Density disc (720 kb). Try that. Fabio ... From:
freedos
2004-08-22 by miles_philip
i havent recieved a reply yet, but i just tried the freedos method of copying the OS to a floppy and am still getting an error message, CRC error or missing
Re: [Ensoniq-VFX-SD] cant load OS onto floppy
2004-08-22 by René van den Bosch
Hello, Someone was writing me with the same notes (the windows version problem) but maybe this is a solution: Check your ROM version by pressing Preset +
Re: [Ensoniq-VFX-SD] cant load OS onto floppy
2004-08-22 by René van den Bosch
Hello, I had the same problems a few day ago. Actually I find the original disk to load the sequencer I think the problem is the windows version Geiblers
cant load OS onto floppy
2004-08-22 by miles_philip
hello again i appreciate the information everyone has supplied me with, but im afraid im still having problems. i have the geiblers software albiet the
Re: [Ensoniq-VFX-SD] version
2004-08-22 by Sandy Lane
Hello, Sequencer version 2.10 should definitely work in your VFX-SD. It is the latest upgrade and the owner s manual says to always use the latest version. So
Re: [Ensoniq-VFX-SD] VFX-SD "sequencer not loaded" message
2004-08-22 by Sandy Lane
Hello, Miles! I am a happy owner of two VFX-SD s and a SD-1. If you have a disk with OS version 4.1, that is for the SD-1 and will not work in a VFX-SD. The
AW: [Ensoniq-VFX-SD] version
2004-08-21 by hans-artmann@t-online.de
René, Check your ROM version by pressing Preset + Master. If it is ROM 2.0 then the sequencer OS 2.1 must work and you ve a different problem: most likely
Re: sequencer OS
2004-08-20 by Steve Wahl
... Now you guys have me confused! I thought that the sequencer was the only thing to load from the disk, that everything else was in ROM. But then it s been
Re: [Ensoniq-VFX-SD] Sequencer OS
2004-08-20 by René van den Bosch
Thanks for your help I have tried this week already the sequencer version 2.1 but it doesn t work. I you can help me with version 2.0 than I would be very very
Re: [Ensoniq-VFX-SD] sequencer OS
2004-08-20 by René van den Bosch
Hello, Thanks for your reply. I ve lost my original disk. I can t find it anymore. Very stupid because i ve been searching a whole week now for someone who can
RE: [Ensoniq-VFX-SD] sequencer OS
2004-08-20 by David A. Pope
BTW Do you have the original VFX disk? The Sequencer SHOULD be on that disk, instead of loading the OS, move to load Sequencer David _____ From: René van den
Re: [Ensoniq-VFX-SD] Sequencer OS
2004-08-19 by Fabio D. García
Hello, Just to say that http://www.azweb.com.ar/fabio/ I have several tools for VFX-SD. Please, check it. Best reagards, Fabio ... From: miles_philip To:
Operating system 2.0
2004-08-19 by René van den Bosch
Hello, I saw on ebay a message and a disk of the sequencer operating system 2.0. That s the one I need. But I need a download version because I need it this
version
2004-08-19 by René van den Bosch
Hello, I already tried to load a 2.10 sequencer version but the VFX hang after 2 seconds of loading it. so I need an older one I think Ren� Hello, I already
sequencer OS
2004-08-19 by René van den Bosch
Hello, I have a Vfx-sd+ with Rom version 2.0 I lost my sequencer next week and need to load a new one from disk. This weekend I have to load my patches for a
Re: [Ensoniq-VFX-SD] Digest Number 541
2004-08-19 by Joe McMahon
... @.10 should work fine on a standard VFXsd. If you ve got 2.0, 2.1 is a minor upgrade (seemed mostly to be stability fixes). On another note, does anyone
RE: [Ensoniq-VFX-SD] Sequencer OS
2004-08-19 by David A. Pope
Just a quick checkin... Sequencer Not Loaded is a message indicating that the sequencer software is not loaded and loading the OS is COMPLETELY separate
RE: [Ensoniq-VFX-SD] Sequencer OS
2004-08-19 by john brusseau
Hey Phillip, if you have downloaded, and converted the 2.10 O.S so that the VFXsd can read it(Windows formatted floppies can t be read by the VFXsd. They must
Sequencer OS
2004-08-19 by miles_philip
hello again i just want to know if the sequencer OS comes with the VFX SD OS, or are they one and the same. i just downloaded a new OS for my VFX SD, its
Re: [Ensoniq-VFX-SD] VFX-SD "sequencer not loaded" message
2004-08-17 by Frank Crawford
it is not for the vfx-sd. SD-1 only I think
VFX-SD "sequencer not loaded" message
2004-08-17 by miles_philip
... hello again, my VFX SD is version 2.01 i believe, which sequencer version do i need? as i said i have a disk that says ensoniq SD-1 sequencer operating
RE: [Ensoniq-VFX-SD] VFX-SD "sequencer not loaded" message
2004-08-17 by john brusseau
As far as know, 2.10 was the latest sequencer version for the VFXsd. 1.37 was the earlier version. You can download the correct sequencer version from;
VFX-SD "sequencer not loaded" message
2004-08-17 by miles_philip
hi there im a new owner of a VFX SD and everytime i try and use the sequencer, as in press any of the sequencer buttons it says sequencer not loaded. i have a
RE: [Ensoniq-VFX-SD] VFX-SD Tuning/Pitch Problem
2004-08-16 by Rodney Mcdonald
Is it patch dependant? It could it be a pitch or mod wheel issue. See if you can disable the functionality through the patch programming. I ve had issues
Re: VFX-SD Tuning/Pitch Problem
2004-08-14 by Steve Wahl
... Pitch: check the pitch-bend wheel, see if it s giving a steady value. Press PRESET + COMPARE to bring up the analog tests screen, and look at the PTCH
Re: [Ensoniq-VFX-SD] VFX-SD Tuning/Pitch Problem
2004-08-14 by Steve Karl
Possibly drirty controls wheel. I ve had to spray mine a few times. ... From: Erich Miller To: Ensoniq-VFX-SD@yahoogroups.com Sent: Saturday, August 14, 2004
VFX-SD Tuning/Pitch Problem
2004-08-14 by Erich Miller
Has anyone ever experienced a problem with their VFX-sd where the pitch seems to change on it s own and wherever the cursor is in the display window, the
Re: [Ensoniq-VFX-SD] Can Anyone Helo Me With Reason 2.5?
2004-08-09 by Ralph Stokes
... *If you don t get an answer, you can maybe try this Forum... http://forum.midiaddict.com/index.php?sid=a038d4ab3e19b0ee5c610e8818c5683b Ralph :-) *
Re: [Ensoniq-VFX-SD] Can Anyone Helo Me With Reason 2.5?
2004-08-09 by Eric Wistrand
Reason will only record one MIDI track at a time if I remember.So,set up a Reason song(two MIDI tracks,each going to a NN-XT will do).Make sure the VFX s
Can Anyone Helo Me With Reason 2.5?
2004-08-09 by Elliot Blake
Hello: I was wondering if anyone can help me. I hope this is going out to everyone. I have Reason 2.5. I also have a Midiman USB Midisport 2x2 Midi, Cakewalk
Downloading midi files
2004-08-01 by bobratica1020
Just a simple question. Can drum patterns downloaded from the internet be sent sysex to the vfx. I asked this question before and knowbody reading this forum
Re: SD-1 Sequencer
2004-08-01 by bobratica1020
Not sure if you had were able to get any of the vfx drum grooves that were released early. Some of these were on the tomdisk set, I don t know if it is still
Re: [Ensoniq-VFX-SD] SD-1 Sequencer keeping time
2004-07-31 by Jay Barnes
Thanks to everyone for all the response. Now that I know it can be done I ll keep reading the manual. I must be missing it due to reading too fast. Jay ...
VFX-SD Schematic
2004-07-31 by Steve
Send me an email directly. I have some information that is helpful. generic2hath@adelphia.net ... From: mindbridge2cool To: Ensoniq-VFX-SD@yahoogroups.com
I need a VFX-SD Schematic and/or Service Manual
2004-07-30 by mindbridge2cool
Hi Gang, New member here, just bought another VFX-SD that needed some love, (calibration error, etc), and apparently a previous owner had a little too much fun
SD-1 Sequencer keeping time
2004-07-30 by mishon66@aol.com
On the issue of having trouble sequencing in time, I always sequence at 120 bpm even if the part is to be played faster. You will have plenty of head room to
RE: [Ensoniq-VFX-SD] SD-1 Sequencer
2004-07-30 by Geren W. Mortensen, Jr.
Hey, Big Guy, I don t have the manual in front of me, but, it seems to me that it is possible to do this, at least on a VFX-SD. Somewhere in the sequencer
RE: [Ensoniq-VFX-SD] Re:SD-1 Sequencer
2004-07-30 by john brusseau
I have a VFXsd, and a TS10. They both have much the same sequencer as a SD1. I totally rely on the sequencer to build songs. I cannot play any instruments, so
Re:SD-1 Sequencer
2004-07-30 by Frank Lihotz
Sequence mode is where you build your loops. Each loop can contain up to 12 tracks. In your example, you would build drums and bass together as a loop - you
RE: [Ensoniq-VFX-SD] SD-1 Sequencer
2004-07-30 by Rodney Mcdonald
Jay, You can do what you want, using the append function, starting with a fundamental repeated track. For example: Create a drum track that s 2 measures long,
Re: [Ensoniq-VFX-SD] SD-1 Sequencer
2004-07-30 by Frank Crawford
you could also save the same sequence several times with a slightly different name, such as (name)vs or (name)ch
Re: [Ensoniq-VFX-SD] SD-1 Sequencer
2004-07-30 by Frank Crawford
I am using an SD-1. You can copy whole sequences, or single tracks to another sequence. In song mode, you can define order, repeats, etc
Re: [Ensoniq-VFX-SD] SD-1 Sequencer
2004-07-30 by Jay Barnes
I may be mistaken but it sounds like you re wanting to do what I m trying to do. Lay down some drum tracks to play along with (guitar, organ piano etc). The
Re: [Ensoniq-VFX-SD] SD-1 Sequencer
2004-07-30 by Frank Crawford
for this discussion, forget the 12 song tracks. lay down a drum loop on track 1. Then let the seq play, & record a bass track. Now play any other instrument